To propagate energy down an arm of a hybrid ring duplexer, the two fields at the junction of the arm and the ring must have what phase relationship? To propagate energy down an arm of a hybrid ring duplexer, the two fields at the junction of the arm and the ring must have what phase relationship?

To propagate energy down an arm of a hybrid ring  duplexer, the two fields at the junction of the arm and the ring  must have what phase relationship?
by

1 Answer

Answer :

180 degrees out of phase
by

Related questions

In a series-connected duplexer, what tube (tr or atr), if any, fires during the receive cycle?

Description : In a series-connected duplexer, what tube (tr or atr), if any, fires during the receive cycle?

Last Answer : Neither fires.

During which of the transmit or receive cycles are both the tr and atr tubes of a parallelconnected duplexer ionized (arcing)?

Description : During which of the transmit or receive cycles are both the tr and atr tubes of a parallelconnected duplexer ionized (arcing)?

Last Answer : Transmit.

What tube in a duplexer has the primary function of disconnecting the receiver?

Description : What tube in a duplexer has the primary function of disconnecting the receiver?

Last Answer : Tr tube.

What type of junctions are formed where the arms of a hybrid ring meet the main ring?

Description : What type of junctions are formed where the arms of a hybrid ring meet the main ring?

Last Answer : Basic E-type junctions.

The value of the normalized frequency parameter (V) relates the core size with mode propagation. When single mode fibers propagate only the fundamental mode, what is the value of V?

Description : The value of the normalized frequency parameter (V) relates the core size with mode propagation. When single mode fibers propagate only the fundamental mode, what is the value of V?

Last Answer : V≤2.405.

Meridional rays are classified as either bound or unbound rays. Bound rays propagate through the fiber according to what property?

Description : Meridional rays are classified as either bound or unbound rays. Bound rays propagate through the fiber according to what property?

Last Answer : Total internal reflection.

Low-order and high-order modes propagate along an optical fiber. How are modes determined to be low-order or high order modes?

Description : Low-order and high-order modes propagate along an optical fiber. How are modes determined to be low-order or high order modes?

Last Answer : Depends on the bending caused by the velocity difference of the wave traveling through different mediums

Describe with the neat sketch of hybrid junction and illustrate its properties.

Description : Describe with the neat sketch of hybrid junction and illustrate its properties.

Last Answer : The magic tee is a combination of E and H plane tees. Arm 3 forms an H-plane tee with arms 1 and 2. Arm 4 forms an E-plane tee with arms 1 and 2. Arms 1 and 2 are sometimes called the ... are fed in through ports 1 and 2, they are added at the H-plane port and subtracted at the E-plane port.

Component 'D' in section 'I' shown in the illustration represents a ____________. EL-0093 A. selector switch B. vibrating reed indicator C. junction box D. ring counter

Description : Component 'D' in section 'I' shown in the illustration represents a ____________. EL-0093 A. selector switch B. vibrating reed indicator C. junction box D. ring counter

Last Answer : Answer: A

What determines the phase relationship between the voltages in a two-phase ac generator?

Description : What determines the phase relationship between the voltages in a two-phase ac generator?

Last Answer : Placement of armature coils.

What is the fundamental difference between the phase relationship of the harmonics of the square wave as compared to the harmonics of a peaked wave?

Description : What is the fundamental difference between the phase relationship of the harmonics of the square wave as compared to the harmonics of a peaked wave?

Last Answer : All the odd harmonics are in phase with the fundamental in the square wave. This is not true of the odd harmonics in the peaked wave.

The input and output signals of a JFET amplifier have what phase relationship?

Description : The input and output signals of a JFET amplifier have what phase relationship?

Last Answer : They are 180 degrees out of phase.

What is the phase relationship between the delayed and undelayed video?

Description : What is the phase relationship between the delayed and undelayed video?

Last Answer : Opposite.

What signal is used to synchronize the coherent oscillator to a fixed phase relationship with the transmitted pulse?

Description : What signal is used to synchronize the coherent oscillator to a fixed phase relationship with the transmitted pulse?

Last Answer : Coho lock pulse.

What type of target has a fixed phase relationship from one receiving period to the next?

Description : What type of target has a fixed phase relationship from one receiving period to the next?

Last Answer : Stationary.

What is the phase relationship between current and voltage in an inductor?

Description : What is the phase relationship between current and voltage in an inductor?

Last Answer : Current lags voltage by 90° (ELI).

In a three-phase alternator, what is the phase relationship between the individual output voltages?

Description : In a three-phase alternator, what is the phase relationship between the individual output voltages?

Last Answer : Each phase is displaced 120º from the other two

The action of a PN-junction during breakdown can be explained by what two theories?

Description : The action of a PN-junction during breakdown can be explained by what two theories?

Last Answer : Zener effect and avalanche effect.

Why is the H-type T junction so named?

Description : Why is the H-type T junction so named?

Last Answer : The junction arm extends in a direction parallel to the H lines in the main waveguide.

When a PN junction is forward biased, what happens to the depletion region?

Description : When a PN junction is forward biased, what happens to the depletion region?

Last Answer : The depletion region decreases.

What is the main difference in construction between normal PN junction diodes and tunnel diodes?

Description : What is the main difference in construction between normal PN junction diodes and tunnel diodes?

Last Answer : The amount of doping.

Which breakdown theory explains the action that takes place in a heavily doped PN-junction with a reverse bias of less than 5 volts?

Description : Which breakdown theory explains the action that takes place in a heavily doped PN-junction with a reverse bias of less than 5 volts?

Last Answer : Zener effect.

In a reverse biased PN-junction, which current carriers cause leakage current?

Description : In a reverse biased PN-junction, which current carriers cause leakage current?

Last Answer : The minority carriers

What type of bias opposes the PN junction barrier?

Description : What type of bias opposes the PN junction barrier?

Last Answer : Forward.

In order to reverse bias in a PN junction, what terminal of a battery is connected to the P material?

Description : In order to reverse bias in a PN junction, what terminal of a battery is connected to the P material?

Last Answer : Negative.

What is the name of the area in a PN junction that has a shortage of electrons and holes?

Description : What is the name of the area in a PN junction that has a shortage of electrons and holes?

Last Answer : Depletion region

What is the purpose of a PN junction diode?

Description : What is the purpose of a PN junction diode?

Last Answer : To convert alternating current into direct current

What is the capacitive reactance across a point-contact diode as compared to a normal junction diode?

Description : What is the capacitive reactance across a point-contact diode as compared to a normal junction diode?

Last Answer : Lower.

What is the junction arrangement of the original avalanche transit-time diode?

Description : What is the junction arrangement of the original avalanche transit-time diode?

Last Answer : Pnin.

What is the primary advantage of bulk-effect devices over normal pn-junction semiconductors?

Description : What is the primary advantage of bulk-effect devices over normal pn-junction semiconductors?

Last Answer : Larger microwave power outputs.

The varactor is a pn junction that acts as what type of electronic device?

Description : The varactor is a pn junction that acts as what type of electronic device?

Last Answer : Variable capacitor.

Which junction acts as the detector in a common-base detector?

Description : Which junction acts as the detector in a common-base detector?

Last Answer : Emitter-base junction.

Which junction of the transistor in the common-emitter detector detects the modulation envelope?

Description : Which junction of the transistor in the common-emitter detector detects the modulation envelope?

Last Answer : Emitter-base junction

For an electric field to exist at the surface of a conductor, the field must have what angular relationship to the conductor?

Description : For an electric field to exist at the surface of a conductor, the field must have what angular relationship to the conductor?

Last Answer : The field must be perpendicular to the conductors.

What relationship must exist between the electron beam and the traveling wave for bunching to occur in the electron beam of a twt?

Description : What relationship must exist between the electron beam and the traveling wave for bunching to occur in the electron beam of a twt?

Last Answer : The traveling wave must have a forward velocity equal to or less than the speed of the electrons in the beam.

How can intermodulation interference between two transmitters in close proximity reduced or eliminated? A. Through installing a band-pass filter in the antenna feed line B. Through installing terminated circulator or ferrite isolator in the feed line of the transmitter and duplexer C. By using a class C final amplifier with high driving power D. By installing a low-pass filter in the antenna feed line

Description : How can intermodulation interference between two transmitters in close proximity reduced or eliminated? A. Through installing a band-pass filter in the antenna feed line B. Through installing terminated circulator ... high driving power D. By installing a low-pass filter in the antenna feed line

Last Answer : A. Through installing a band-pass filter in the antenna feed line

The maximum angle in which external light rays may strike the air/glass interface and still propagate down the fiber. ∙ A. Acceptance cone half-angle ∙ B. Acceptance cone ∙ C. Critical angle ∙ D. Angle of incidence

Description : The maximum angle in which external light rays may strike the air/glass interface and still propagate down the fiber. ∙ A. Acceptance cone half-angle ∙ B. Acceptance cone ∙ C. Critical angle ∙ D. Angle of incidence

Last Answer : A. Acceptance cone half-angle

The maximum angle in which external light rays may strike the air/glass interface and still propagate down the fiber.

Description : The maximum angle in which external light rays may strike the air/glass interface and still propagate down the fiber.

Last Answer : Acceptance cone half-angle

Which one is an antenna coupling unit? A. Coupler B. Diplexer C. Lecher wire D. Duplexer

Description : Which one is an antenna coupling unit? A. Coupler B. Diplexer C. Lecher wire D. Duplexer

Last Answer : B. Diplexer

Essentially a satellite ___________ is a radio repeater in the sky A. transponder B. comparator C. duplexer D. billboard

Description : Essentially a satellite ___________ is a radio repeater in the sky A. transponder B. comparator C. duplexer D. billboard

Last Answer : A. transponder

What is the effective radiated power of a repeater with 200 watts transmitter power output, 4 dB feline loss, 4 dB duplexer and circulator loss, and 10 dB antenna gain? A. 317 W B. 2000 W C. 126 W D. 260 W

Description : What is the effective radiated power of a repeater with 200 watts transmitter power output, 4 dB feline loss, 4 dB duplexer and circulator loss, and 10 dB antenna gain? A. 317 W B. 2000 W C. 126 W D. 260 W

Last Answer : A. 317 W

What is the effective radiated power of a repeater with 120 watts transmitter power output, 5 dB feedline loss, 4 dB duplexer and circulator loss, and 6 dB antenna gain? A. 601 W B. 240 W C. 60 W D. 379 W

Description : What is the effective radiated power of a repeater with 120 watts transmitter power output, 5 dB feedline loss, 4 dB duplexer and circulator loss, and 6 dB antenna gain? A. 601 W B. 240 W C. 60 W D. 379 W

Last Answer : C. 60 W

What is the effective radiated power of a repeater with 100 watts transmitter power output, 5 dB feedline loss, 4 dB duplexer and circulator loss, and 10 dB antenna gain? A. 800 W B. 126 W C. 12.5 W D. 1260 W

Description : What is the effective radiated power of a repeater with 100 watts transmitter power output, 5 dB feedline loss, 4 dB duplexer and circulator loss, and 10 dB antenna gain? A. 800 W B. 126 W C. 12.5 W D. 1260 W

Last Answer : B. 126 W

What is the effective radiated power of a repeater with 75 watts transmitter power output, 5 dB feedline loss, 4 dB duplexer and circulator loss, and 6 dB antenna gain? A. 37.6 W B. 237 W C. 150 W D. 23.7 W

Description : What is the effective radiated power of a repeater with 75 watts transmitter power output, 5 dB feedline loss, 4 dB duplexer and circulator loss, and 6 dB antenna gain? A. 37.6 W B. 237 W C. 150 W D. 23.7 W

Last Answer : A. 37.6 W

What is the effective radiated power of a repeater with 75 watts transmitter power output, 4 dB feedline loss, 3 dB duplexer and circulator loss, and 10 dB antenna gain? A. 600 W B. 75 W C. 18.75 W D. 150 W

Description : What is the effective radiated power of a repeater with 75 watts transmitter power output, 4 dB feedline loss, 3 dB duplexer and circulator loss, and 10 dB antenna gain? A. 600 W B. 75 W C. 18.75 W D. 150 W

Last Answer : D. 150 W

What is the effective radiated power of a repeater with 50 watts transmitter power output, 5 dB feedline loss, 4 dB duplexer and circulator loss, and 7 dB antenna gain? A. 300 W B. 315 W C. 31.5 W D. 69.9 W

Description : What is the effective radiated power of a repeater with 50 watts transmitter power output, 5 dB feedline loss, 4 dB duplexer and circulator loss, and 7 dB antenna gain? A. 300 W B. 315 W C. 31.5 W D. 69.9 W

Last Answer : C. 31.5 W

What is the effective radiated power of a repeater with 50 watts transmitter power output \, 4 dB feedline loss, 3 dB duplexer and circulator loss, and 6 dB antenna gain? A. 158 W B. 39.7 W C. 251 W D. 69.9 W

Description : What is the effective radiated power of a repeater with 50 watts transmitter power output \, 4 dB feedline loss, 3 dB duplexer and circulator loss, and 6 dB antenna gain? A. 158 W B. 39.7 W C. 251 W D. 69.9 W

Last Answer : B. 39.7 W

Referred to as a ferrite device that can be used in lieu of a duplexer to isolate a microwave transmitter and receiver when both are connected to the same antenna. A. Isolator B. Circulator C. Coupler D. Diode.

Description : Referred to as a ferrite device that can be used in lieu of a duplexer to isolate a microwave transmitter and receiver when both are connected to the same antenna. A. Isolator B. Circulator C. Coupler D. Diode.

Last Answer : B. Circulator

A duplexer is used to

Description : A duplexer is used to  (A) Couple two antennas to a transmitter without interference (B) isolate the antenna from the local oscillator (C) prevent interference between two antennas connected to a receiver (D) use an antenna for reception or transmission without interference.

Last Answer : A duplexer is used to prevent interference between two antennas connected to a receiver

Duplexer is used for

Last Answer : Duplexer is used for To allow one antenna to be used for reception and transmission.