What relationship must exist between the electron beam  and the traveling wave for bunching to occur in the electron  beam of a twt?

1 Answer

Answer :

The traveling wave must have a forward velocity equal to or  less than the speed of the electrons in the beam.

Related questions

Description : What structure in the twt delays the forward progress of the traveling wave?

Last Answer : The helix.

Description : What condition must exist on both the limiter and quadrature grids for current to flow in a gated-beam detector?

Last Answer : Both grids must be positively biased

Description : The folded waveguide in a bwo serves the same purpose as what component in a twt?

Last Answer : Helix.

Description : How are the input and output directional couplers in a twt connected to the helix?

Last Answer : The directional couplers are not physically connected to the helix.

Description : The magnet surrounding the body of a twt serves what purpose?

Last Answer : Used to focus the electrons into a tight beam.

Description : What is the primary use of the twt?

Last Answer : Voltage amplification.

Description : A space ship traveling toward Mars at 0.6 times the speed of light c shoots an ELECTRON beam at Mars. If the electrons travel at 0.6 c RELATIVE TO THE SPACE SHIP, at what speed do the electrons impact the surface of Mars? w) 0.6 c x) 0.88 c y) 1.2 c z) 1.34 c

Last Answer : ANSWER: X -- 0.88 c

Description : For an electric field to exist at the surface of a conductor, the field must have what angular relationship to the conductor?

Last Answer : The field must be perpendicular to the conductors.

Description : What will be the effect upon an electron traveling in the opposite direction to the lines of force in an electrostatic field?

Last Answer : The electron will be accelerated.

Description : What effect does closer spacing of plates have on the electron beam?

Last Answer : A greater deflection angle.

Description : What effect does closer spacing of plates have on the electron beam?

Last Answer : A greater deflection angle.

Description : What effect do longer deflection plates have on the electron beam?

Last Answer : A greater deflection angle.

Description : The electron beam in a CRT is made to sweep from left to right across the screen. What tube element causes this sweeping motion?

Last Answer : The horizontal-deflection plate.

Description : What type of deflection is preferred for a crt electron beam?

Last Answer : . Electromagnetic.

Description : How is the electron beam of a three-cavity klystron accelerated toward the drift tube?

Last Answer : A large negative pulse is applied to the cathode.

Description : State one requirement of an electron tube, which does not exist for semiconductors, that makes the tube less efficient than the semiconductor.

Last Answer : The electron tube requires filament or heater voltage, whereas the semiconductor device does not; consequently, no power input is spent by the semiconductor for conduction.

Description : In a simply supported beam carrying a uniformly distributed load over the left half span, the point of contraflexure will occur in (a) Left half span of the beam (b) Right half span of the beam. (c) Quarter points of the beam (d) Does not exist

Last Answer : (d) Does not exist

Description : Inserted zipper in dress and need advice how to stop bunching at waist?

Last Answer : answer:Welcome to Fluther. The short answer is “diet and exercise”. The longer response is “even experienced seamstresses (and tailors, or even tent and sail makers) need more detail”.

Description : How can I stop my zipper from bunching?

Last Answer : I’m pretty sure some places sell tape that adheres to your skin and whatever you’re wearing to tape it down. Maybe that would help?

Description : What is "crotch bunching"?

Last Answer : I tried googling, but I couldn’t find an answer to this one. johnpowell can tell you about dick punching tho….

Description : We have bunching onions, with flat leaves like garlic, are they edible or decorative? Any one know the variety?

Last Answer : Need Answer

Description : have bunching onions, with flat leaves like garlic, are they edible or decorative? Any one know the variety?

Last Answer : Need Answer

Description : . What primary condition must magnetic lines of force meet in order to exist?

Last Answer : Magnetic lines of force must form a continuous closed loop.

Description : What logic levels must exist for the FF to be toggled by the clock?

Last Answer : Both J and K must be HIGH.

Description : What is the fundamental difference between the phase relationship of the harmonics of the square wave as compared to the harmonics of a peaked wave?

Last Answer : All the odd harmonics are in phase with the fundamental in the square wave. This is not true of the odd harmonics in the peaked wave.

Description : The constant-speed electrons of an electron bunch in a reflex klystron must remain in the repeller field for what minimum time?

Last Answer : Three-quarter cycle.

Description : Which of the following types of HPA is not used in earth stations? A. TWT B. Transistor C. Klystron D. Magnetron

Last Answer : D. Magnetron

Description : Collects very weak signals from a broadcast satellite A. Helical antenna B. Satellite dish C. LNA D. TWT

Last Answer : B. Satellite dish

Description : Repeaters inside communications satellites are known as A. Trancievers B. Transponders C. Transducers D. TWT

Last Answer : B. Transponders

Description : Draw labelled sketch of TWT and give its two applications.

Last Answer : Applications:  * Low noise RF amplifier in broadband microwave receivers. * Repeater amplifiers for long distance telephony. * Used as power output tube in communication satellites. * ... troposcatter links. * Airborne and ship borne pulsed high power radars, EM ground based radars.

Description : TWT is basically a(n) A) Amplifier B) An oscillator C) Wideband amplifier D) Tuned amplifier 

Last Answer : TWT is basically a(n) Wideband amplifier 

Description : What three factors must be considered in the transmission of a surface wave to reduce attenuation?

Last Answer : (a) electrical properties of the terrain (b) frequency (c) polarization of the antenna

Description : . An independent relationship must exist between the attribute that can be measured and the external quality attribute. a) True b) False

Last Answer : b) False

Description : An independent relationship must exist between the attribute that can be measured and the external  quality attribute. a) True b) False

Last Answer : b) False

Description : An independent relationship must exist between the attribute that can be  measured and the external quality attribute. (A) True (B)False

Last Answer : (B)False

Description : What condition must occur to have a change in the output of a D FF?

Last Answer : A positive-going clock pulse.

Description : How were people traveling when passport didn't exist?

Last Answer : Difficult question. How far back are we looking? Before countries? Before tribes? Before family groups? There have always been boundaries. I would thing

Description : To propagate energy down an arm of a hybrid ring duplexer, the two fields at the junction of the arm and the ring must have what phase relationship?

Last Answer : 180 degrees out of phase

Description : What happens to the speed of electromagnetic energy traveling through air as the altitude increases?

Last Answer : Speed increases

Description : What is the speed of electromagnetic energy traveling through air?

Last Answer : Approximately the speed of light (162,000 nautical miles per second).

Description : Assume light is traveling through glass, what happens when this light strikes the glass-air boundary?

Last Answer : Part of the light ray is reflected back into the glass and part of the light ray is refracted (bent) as it enters the air.

Description : What are Waves that move the particles of the wave parallel to the direction the waves are traveling are called?

Last Answer : the distance between two corresponding parts of a wave is a waves

Description : What medium a transverse wave traveling through?

Last Answer : Need answer

Description : How wavelength of wave traveling with the same speed would change if the frequency of the wave increase?

Last Answer : The speed of a wave is equal to the wavelength divided by the frequency (speed = wavelength/frequency). So if the frequency of the wave increases, the wavelength will decrease.

Description : In which type of waves is the motion of the particles perpendicular to the direction of the wave is traveling?

Last Answer : transverse waves

Description : In a pressure penstock 4500 m long, water is flowing at a velocity of 4 m/s. If the velocity of the pressure wave traveling in the pipe, due sudden complete closure of a valve at the downstream end, is ... period of oscillation in second under frictionless conditions? (a) 6 (b) 8 (c) 9 (d) 11

Last Answer : (a) 6

Description : A wave in which the movement of the wave’s medium is perpendicular to the movement of the wave traveling through the medium A. Transverse waves B. Compression waves C. Nodular Waves D. Ocean Waves

Last Answer : A. Transverse waves

Description : Which of the following waves is not a transverse wave? w) a wave traveling on a string x) an electromagnetic wave y) a sound wave

Last Answer : ANSWER: Y -- A SOUND WAVE

Description : For an electromagnetic wave traveling in a vacuum, if the magnitude of the intensity of the E field is zero, the magnitude of the intensity of the B field is: w) zero x) a negative maximum y) a positive maximum z) the square root of 2 times the positive maximum

Last Answer : ANSWER: W -- ZERO

Description : When light is traveling through a vacuum, what is the product of the light's wavelength and frequency equal to? w) speed of light x) Plank's constant y) momentum z) wave number

Last Answer : ANSWER: W -- SPEED OF LIGHT