What is the name given to a doped germanium crystal with an excess of free holes?

What is the name given to a doped germanium crystal with  an excess of free holes?
by

1 Answer

Answer :

P-type crystal.
by

Related questions

Which of the listed pairs of materials make the best insulators? A. dry air and a vacuum B. tin and lead C. doped silicon and germanium D. paper and oil

Description : Which of the listed pairs of materials make the best insulators? A. dry air and a vacuum B. tin and lead C. doped silicon and germanium D. paper and oil

Last Answer : Answer: D

Which of the listed pairs of materials make the best insulators? A. copper and aluminum B. glass and mica C. dry air and a vacuum D. doped silicon and germanium

Description : Which of the listed pairs of materials make the best insulators? A. copper and aluminum B. glass and mica C. dry air and a vacuum D. doped silicon and germanium

Last Answer : Answer: B

In order to obtain p-type germanium it should be doped with a (A) Trivalent impurity. (B) Tetravalent impurity. (C) Pentavalent impurity. (D) Any of the above will do.

Description : In order to obtain p-type germanium it should be doped with a (A) Trivalent impurity. (B) Tetravalent impurity. (C) Pentavalent impurity. (D) Any of the above will do.

Last Answer : (A) Trivalent impurity.

A P-type semiconductor is doped to produce one of the following. Will it produce: w) both holes and electrons x) positive electrons y) negative electrons z) holes

Description : A P-type semiconductor is doped to produce one of the following. Will it produce: w) both holes and electrons x) positive electrons y) negative electrons z) holes

Last Answer : ANSWER: Z -- HOLES

Which breakdown theory explains the action that takes place in a heavily doped PN-junction with a reverse bias of less than 5 volts?

Description : Which breakdown theory explains the action that takes place in a heavily doped PN-junction with a reverse bias of less than 5 volts?

Last Answer : Zener effect.

What is the name given to a piece of pure semiconductor material that has an equal number of electrons and holes?

Description : What is the name given to a piece of pure semiconductor material that has an equal number of electrons and holes?

Last Answer : Intrinsic.

What is the impedance of a crystal at its resonant frequency when it is used in the series mode?

Description : What is the impedance of a crystal at its resonant frequency when it is used in the series mode?

Last Answer : Minimum.

What is the impedance of a crystal at its resonant frequency when it is used in the parallel mode?

Description : What is the impedance of a crystal at its resonant frequency when it is used in the parallel mode?

Last Answer : Maximum

During the manufacture of a point-contact diode, what is the purpose of passing a relatively large current from the catwhisker to the silicon crystal?

Description : During the manufacture of a point-contact diode, what is the purpose of passing a relatively large current from the catwhisker to the silicon crystal?

Last Answer : . To form a small region of p-type material

What is the function of a crystal filter in a receiver?

Description : What is the function of a crystal filter in a receiver?

Last Answer : It is used to achieve maximum selectivity.

What does the liquid crystal display require for computer applications?

Description : What does the liquid crystal display require for computer applications?

Last Answer : An external light source, called a backlight.

What property of a crystalline material is used in a crystal microphone?

Description : What property of a crystalline material is used in a crystal microphone?

Last Answer : The piezoelectric effect.

Cycling with 'doped' bicycles: Fair or unfair?

Description : Cycling with 'doped' bicycles: Fair or unfair?

Last Answer : Certainly sounds a little dodgy to say the least.I enjoy following cycling particularly le tour de France.Years ago when the tour was in it's infancy, without television coverage & little media interest, ... of the mountains, ie Marco Pantani & others were high not only in altitude were they not?

For highly doped diode: a) Zener breakdown is likely to take place b) Avalanche breakdown is likely to take place c) Either (a) or (b) can take place d) Neither (a) nor (b) can take place

Description : For highly doped diode: a) Zener breakdown is likely to take place b) Avalanche breakdown is likely to take place c) Either (a) or (b) can take place d) Neither (a) nor (b) can take place

Last Answer : Ans: A

The part of transistor which is heavily doped to produce a large number of majority carriers is –

Description : The part of transistor which is heavily doped to produce a large number of majority carriers is –

Last Answer : Emitter

The part of transistor which is heavily doped to produce a large number of majority carriers is

Description : The part of transistor which is heavily doped to produce a large number of majority carriers is

Last Answer : Emitter

What is an extrinsic semiconductor or doped?

Description : What is an extrinsic semiconductor or doped?

Last Answer : A semiconductor whose conductivity is enhanced by addition of minute traces ofimpurities is called doped or extrinsic semiconductor.

Optical amplifiers use ____________________-doped glass.

Description : Optical amplifiers use ____________________-doped glass.

Last Answer : erbium

The emitter of a transistor is doped the heaviest because it: (a) Acts as a supplier of charge carriers (b) Dissipates maximum power c) has a large resistance (d) has a small resistance

Description : The emitter of a transistor is doped the heaviest because it: (a) Acts as a supplier of charge carriers (b) Dissipates maximum power c) has a large resistance (d) has a small resistance

Last Answer : (a) Acts as a supplier of charge carriers

A part of transistor which is heavily doped to produce large number of majority carriers is (a) Emitter (b) Base (c) Collector (d) any of above

Description : A part of transistor which is heavily doped to produce large number of majority carriers is (a) Emitter (b) Base (c) Collector (d) any of above

Last Answer : (a) Emitter

Transistors are made from (a) Plastic (b) metals (c)insulators (d) doped semiconductors

Description : Transistors are made from (a) Plastic (b) metals (c)insulators (d) doped semiconductors

Last Answer : d) doped semiconductors

A doped semiconductor is called : a) Extrinsic b) Intrinsic c) Insulator d) Conductor

Description : A doped semiconductor is called : a) Extrinsic b) Intrinsic c) Insulator d) Conductor

Last Answer : b) Intrinsic

When a semiconductor is doped with a P-type impurity, each impurity atom will (A) acquire negative charge. (B) acquire positive charge. (C) remain electrically neutral. (D) give away one electron.

Description : When a semiconductor is doped with a P-type impurity, each impurity atom will (A) acquire negative charge. (B) acquire positive charge. (C) remain electrically neutral. (D) give away one electron.

Last Answer : (A) acquire negative charge.

Why is an intrinsic semiconductor doped?

Description : Why is an intrinsic semiconductor doped?

Last Answer : Intrinsic semiconductor is doped in order to increase conductivity of semiconductor. Doping increases majority charge carries either electrons or holes and majority charge carriers responsible for electric current. 

A power diode has lightly doped n type substrate sandwiched between heavily doped p and n regions

Description : A power diode has lightly doped n type substrate sandwiched between heavily doped p and n regions  (a) to increase reverse breakdown voltage (b) to reduce ohmic loss under forward bias (c) to decrease switching time of the power diode (d) to improve transient behaviour of the diode

Last Answer : A power diode has lightly doped n type substrate sandwiched between heavily doped p and n regions  to improve transient behaviour of the diode

While comparing doped semiconductor vs. un-doped semiconductor, which of the following

Description : While comparing doped semiconductor vs. un-doped semiconductor, which of the following statements is NOT true ? (A) Doped semiconductor has smaller band-gap compared to un-doped semiconductor (B) ... to un-doped semiconductor (D) Doped as well as un-doped semiconductor have equal bandwidth

Last Answer : While comparing doped semiconductor vs. un-doped semiconductor, which of the following statements is NOT true ? (A) Doped semiconductor has smaller band-gap compared to un-doped semiconductor (B) ... to un-doped semiconductor (D) Doped as well as un-doped semiconductor have equal bandwidth

In a P-N diode, assume that P-side is lightly doped and N-side is heavily doped. Based on this

Description : In a P-N diode, assume that P-side is lightly doped and N-side is heavily doped. Based on this information, which of the following statement is true ? (A) Depletion region is more extended in ... (C) Depletion region would be equal on both sides (D) Not enough information provided to give answer

Last Answer : In a P-N diode, assume that P-side is lightly doped and N-side is heavily doped. Based on this information, which of the following statement is true ? (A) Depletion region is more extended ... (C) Depletion region would be equal on both sides (D) Not enough information provided to give answer

When the temperature of a doped semiconductor is increased, its conductivity...

Description : When the temperature of a doped semiconductor is increased, its conductivity  (1) Decreases (2) Increases (3) Does not change (4) Increases or decreases depending on whether it is p-type or n-type

Last Answer : When the temperature of a doped semiconductor is increased, its conductivity Increases.

why is zener diode heavily doped?

Last Answer : PN junction of zener diode is heavily doped than ordinary diode. For the occurrence of Zener effect the zener diode is heavily doped. If the zener diode is not heavily doped then Zener effect ... breakdown voltage is sharp. If the diode is lightly doped the diode will have higher breakdown voltage.

How far apart are the two holes in a simple directional coupler?

Description : How far apart are the two holes in a simple directional coupler?

Last Answer : 1/4 wavelength.

What is the name of the area in a PN junction that has a shortage of electrons and holes?

Description : What is the name of the area in a PN junction that has a shortage of electrons and holes?

Last Answer : Depletion region

How should excess solder be removed from a hot soldering iron?

Description : How should excess solder be removed from a hot soldering iron?

Last Answer : By use of a cleaning cloth.

What is the type of bond by germanium and arsenic?

Description : What is the type of bond by germanium and arsenic?

Last Answer : Feel Free to Answer

Why is silicon and germanium used in semiconductors.pdf?

Description : Why is silicon and germanium used in semiconductors.pdf?

Last Answer : Feel Free to Answer

How many neutrons in a single atom of germanium -74?

Description : How many neutrons in a single atom of germanium -74?

Last Answer : Need answer

Tunnel diode is a: a) Power diode b) Has light doping c) Has heavy doping d) Is a reverse recovery diode Ans: C 76.LEDs are fabricated from: a) Silicon b) Germanium c) Si or Ge d) Gallium arsenide

Description : Tunnel diode is a: a) Power diode b) Has light doping c) Has heavy doping d) Is a reverse recovery diode Ans: C 76.LEDs are fabricated from: a) Silicon b) Germanium c) Si or Ge d) Gallium arsenide

Last Answer : Ans: D

When Arsenic atoms are added Germanium lattice, it becomes a/an - (1) Insulator (2) Superconductor (3) Intrinsic semiconductor (4) Extrinsic semiconductor

Description : When Arsenic atoms are added Germanium lattice, it becomes a/an - (1) Insulator (2) Superconductor (3) Intrinsic semiconductor (4) Extrinsic semiconductor

Last Answer : (4) Extrinsic semiconductor Explanation: When a peritavalent (donor) impurity, like arsenic, is added to germanium, it will form covalent bonds with thegermanium atoms, leaving 1 electron relatively ... this manner - either with Nor P-type impurities - are referred to as EXTRINSIC semiconductors.

An example of semiconductor is - (1) German silver (2) Germanium (3) Phosphorous (4) Arsenic

Description : An example of semiconductor is - (1) German silver (2) Germanium (3) Phosphorous (4) Arsenic

Last Answer : (2) Germanium Explanation: Purified germanium is a semiconductor, with appearance most similar to elemental silicon. Like silicon, germanium naturally reacts and forms complexes with oxygen in nature. Unlike silicon, it is too reactive to be found naturally on Earth in the free (native) state.

Name two elements that find wide application in transistor industry – (1) Silicon and Germanium (2) Carbon and Platinum (3) Iridium and Germanium (4) Tungsten and Platinum

Description : Name two elements that find wide application in transistor industry – (1) Silicon and Germanium (2) Carbon and Platinum (3) Iridium and Germanium (4) Tungsten and Platinum

Last Answer : (1) Silicon and Germanium Explanation: A transistor is a semiconductor device used to amplify and switch electronic signals and electrical power. Semiconductor material (date first used): the metalloids ... -germanium (1989), the allotrope of carbon graphene (research ongoing since 2004), etc.

Which of the following elements replaced eka-Aluminium in Mendeleev's Periodic Table? (1) Scandium (2) Gallium (3) Titanium (4) Germanium

Description : Which of the following elements replaced eka-Aluminium in Mendeleev's Periodic Table? (1) Scandium (2) Gallium (3) Titanium (4) Germanium

Last Answer : (2) Gallium

Which one of the following is an ohmic conductor? (1) Germanium (2) Silicon (3) Carbon (4) Silver

Description : Which one of the following is an ohmic conductor? (1) Germanium (2) Silicon (3) Carbon (4) Silver

Last Answer : (4) Silver Explanation: Ohmic conductors are conductors that obey Ohm's law, that is Voltage/Current ratio is constant; in other words, the equation Resistance = Voltage/Current is obeyed. ... s resistance does not change with varying current. Metallic conductors such as silver are Ohmic conductors.

Which of the following is an insulator? (1) Mercury (2) Carbon (3) Germanium (4) Glass

Description : Which of the following is an insulator? (1) Mercury (2) Carbon (3) Germanium (4) Glass

Last Answer : (4) Glass Explanation: Insulators are materials that do not allow the transfer or that slow the transfer of heat or electricity. Some of the examples of insulators are: glass, plastic, rubber, porcelain, wood, ceramic, dry air, etc.

The illustrated circuit is a _____________. EL-0024 A. megohm meter B. Gauss meter C. wheatstone bridge D. germanium diode tester

Description : The illustrated circuit is a _____________. EL-0024 A. megohm meter B. Gauss meter C. wheatstone bridge D. germanium diode tester

Last Answer : Answer: C

High vacuum diodes, gas-filled diodes, and germanium semiconductor diodes may all be used as _____________. A. potentiometers B. rectifiers C. power sources D. photocells

Description : High vacuum diodes, gas-filled diodes, and germanium semiconductor diodes may all be used as _____________. A. potentiometers B. rectifiers C. power sources D. photocells

Last Answer : Answer: B

What kind of battery panels are used in some advance satellites? A. Gallium Arsenide solar panel B. Germanium based panels C. Silicon based panels D. Gallium Phosphate solar panel

Description : What kind of battery panels are used in some advance satellites? A. Gallium Arsenide solar panel B. Germanium based panels C. Silicon based panels D. Gallium Phosphate solar panel

Last Answer : A. Gallium Arsenide solar panel

why silicon type transistor are more often used than germanium?

Description : why silicon type transistor are more often used than germanium?

Last Answer : because silicon has smaller cutoff current Icbo, small variations in Icbo due to variation in temperature as compared to those in case of germanium.

Why cannot thousands of compounds of Boron or silicon or germanium not possible?

Description : Why cannot thousands of compounds of Boron or silicon or germanium not possible?

Last Answer : Even though B-B, Si-Si, Ge-Ge bonds exits, these compounds are unstable and very reactive and do not last long.

Give reason: Silicon is used widely even through Germanium is a better semiconductor material.

Description : Give reason: Silicon is used widely even through Germanium is a better semiconductor material.

Last Answer : Silicon is the second most abundantly available material and it can be used at higher temperature. Hence it widely used than Germanium.

Which of the following is not an example of elemental solid dielectric? a) Diamond b) Sulphur c) Silicon d) Germanium

Description : Which of the following is not an example of elemental solid dielectric? a) Diamond b) Sulphur c) Silicon d) Germanium

Last Answer : c) Silicon

Metalloids (A) Are good conductor of heat & electricity (B) Act as electron donors with metals & as electron acceptor with non metals (C) Are not necessarily solids at room temperature (D) Are compounds that exhibit both metallic & non-metallic properties to some extent and are exemplified by elements like germanium, silicon & boron

Description : Metalloids (A) Are good conductor of heat & electricity (B) Act as electron donors with metals & as electron acceptor with non metals (C) Are not necessarily solids at room temperature ... & non-metallic properties to some extent and are exemplified by elements like germanium, silicon & boron

Last Answer : D) Are compounds that exhibit both metallic & non-metallic properties to some extent and are exemplified by elements like germanium, silicon & boron