Name the two general classifications of synchro systems

Name the two general classifications of synchro systems
by

1 Answer

Answer :

Torque and control.
by

Related questions

What are the three relatively common classifications of servo systems by function?

Description : What are the three relatively common classifications of servo systems by function?

Last Answer : Classifications in accordance with position, velocity, and acceleration functions.

What type of synchro is used in systems requiring large amounts of power and a high degree of accuracy?

Description : What type of synchro is used in systems requiring large amounts of power and a high degree of accuracy?

Last Answer : A control synchro.

What are the two classifications of wave generators according to their output waveshapes?

Description : What are the two classifications of wave generators according to their output waveshapes?

Last Answer : Sinusoidal and nonsinusoidal.

What are the two basic classifications of antennas?

Description : What are the two basic classifications of antennas?

Last Answer : Half-wave (Hertz) and quarter-wave (Marconi).

What are the three classifications of dc generators?

Description : What are the three classifications of dc generators?

Last Answer : Series-wound, shunt-wound, and compound-wound

In a dual-speed synchro system what determines the two specific speeds at which the data will be transmitted?

Description : In a dual-speed synchro system what determines the two specific speeds at which the data will be transmitted?

Last Answer : The gear ratio between the two transmitters.

Name two types of trouble you would expect to find in a newly installed synchro system.

Description : Name two types of trouble you would expect to find in a newly installed synchro system.

Last Answer : Improper wiring and misalignment.

What is the name given to the synchro system that transmits data at two different speeds?

Description : What is the name given to the synchro system that transmits data at two different speeds?

Last Answer : . A dual or double-speed synchro system.

What two components make up a simple synchro transmission system?

Description : What two components make up a simple synchro transmission system?

Last Answer : A synchro transmitter and a synchro receiver.

What are the two major components of a synchro?

Description : What are the two major components of a synchro?

Last Answer : The rotor and the stator.

Which of the two synchro designation codes is indicated by 5DG on a synchro nameplate?

Description : Which of the two synchro designation codes is indicated by 5DG on a synchro nameplate?

Last Answer : The Navy prestandard designation code.

What is the reference point for alignment of all synchro units?

Description : What is the reference point for alignment of all synchro units?

Last Answer : The voltmeter method.

. What type of synchro system is used to transmit very large quantities?

Description : . What type of synchro system is used to transmit very large quantities?

Last Answer : A tri-speed synchro system.

What precaution should you take when substituting a synchro tester in a circuit for a transmitter?

Description : What precaution should you take when substituting a synchro tester in a circuit for a transmitter?

Last Answer : Use only one receiver so as not to overload the tester.

What is the most probable cause of trouble in a synchro system that has all of its receivers reading incorrectly?

Description : What is the most probable cause of trouble in a synchro system that has all of its receivers reading incorrectly?

Last Answer : The transmitter or main bus.

What type of indicator is usually placed in the stator circuit of a torque synchro system?

Description : What type of indicator is usually placed in the stator circuit of a torque synchro system?

Last Answer : An overload indicator.

What should you do with a synchro that has a bad set of bearings?

Description : What should you do with a synchro that has a bad set of bearings?

Last Answer : Replace it.

When you zero a synchro with a synchro tester, what is indicated by a jump in the synchro tester's dial when the S1 and S3 leads are momentarily shorted?

Description : When you zero a synchro with a synchro tester, what is indicated by a jump in the synchro tester's dial when the S1 and S3 leads are momentarily shorted?

Last Answer : The synchro under test is not on electrical zero.

What method of zeroing a synchro is perhaps the fastest but NOT necessarily the most accurate?

Description : What method of zeroing a synchro is perhaps the fastest but NOT necessarily the most accurate?

Last Answer : . The electrical lock method.

When you zero a multispeed synchro system which synchro should you zero first?

Description : When you zero a multispeed synchro system which synchro should you zero first?

Last Answer : The coarse synchro.

Why should a synchro be rechecked for zero after it is clamped down?

Description : Why should a synchro be rechecked for zero after it is clamped down?

Last Answer : To ensure that it did not move off zero while it was being clamped.

When is a synchro receiver (TR) properly zeroed?

Description : When is a synchro receiver (TR) properly zeroed?

Last Answer : A TR is zeroed when electrical zero voltages exist across its stator windings at the same time its rotor is on zero or on its mechanical reference position.

What is the purpose of the coarse setting of a synchro?

Description : What is the purpose of the coarse setting of a synchro?

Last Answer : .It ensures the synchro is on 0º, not 180º.

What is the main reason for using a multispeed synchro system instead of a single-speed synchro system?

Description : What is the main reason for using a multispeed synchro system instead of a single-speed synchro system?

Last Answer : Greater accuracy without the loss of self-synchronous operation.

Why are synchro capacitors placed physically close to differentials transmitters and CTs?

Description : Why are synchro capacitors placed physically close to differentials transmitters and CTs?

Last Answer : To keep the connections as short as possible in order to maintain system.

How are synchro capacitors connected in a circuit?

Description : How are synchro capacitors connected in a circuit?

Last Answer : They are delta-connected across the stator windings.

What type of current is eliminated by synchro capacitors?

Description : What type of current is eliminated by synchro capacitors?

Last Answer : Magnetizing current.

What type of synchros usually require the use of synchro capacitors?

Description : What type of synchros usually require the use of synchro capacitors?

Last Answer : TDXs, CDXs, and Cts.

What is the purpose of the synchro capacitor?

Description : What is the purpose of the synchro capacitor?

Last Answer : To improve overall synchro system accuracy by reducing stator currents.

In a control synchro system, when is the output of the CT reduced to zero?

Description : In a control synchro system, when is the output of the CT reduced to zero?

Last Answer : When the CX and CT rotors are in correspondence.

What determines whether a differential synchro adds or subtracts?

Description : What determines whether a differential synchro adds or subtracts?

Last Answer : The way the differential synchro is connected in a system is the deciding factor on whether the unit adds or subtracts its inputs.

What leads in a simple synchro system are connected to the ac power line?

Description : What leads in a simple synchro system are connected to the ac power line?

Last Answer : The rotor leads.

What method is used to prevent oscillations in large synchro units?

Description : What method is used to prevent oscillations in large synchro units?

Last Answer : Mechanical damping.

What is the physical difference between a synchro transmitter and a synchro receiver?

Description : What is the physical difference between a synchro transmitter and a synchro receiver?

Last Answer : A synchro receiver uses some form of damping to retard excessive oscillations or spinning.

Describe the zero-position of a synchro transmitter.

Description : Describe the zero-position of a synchro transmitter.

Last Answer : The transmitter is in its zero-position when the rotor is aligned with the S2 stator winding.

When will a synchro generate more heat than it is designed to handle?

Description : When will a synchro generate more heat than it is designed to handle?

Last Answer : Synchros have one primary winding that can be turned through 360º and three secondary windings spaced 120º apart.

What unit of measurement refers to the torque of a synchro transmitter

Description : What unit of measurement refers to the torque of a synchro transmitter

Last Answer : Ounce-inches.

In a TDX system with standard synchro connections, the TX rotor is at 120º and the TDX rotor is at 40º. What position will the TR indicate?

Description : In a TDX system with standard synchro connections, the TX rotor is at 120º and the TDX rotor is at 40º. What position will the TR indicate?

Last Answer : . 80º.

On the synchro schematic symbol, what indicates the angular displacement of the rotor?

Description : On the synchro schematic symbol, what indicates the angular displacement of the rotor?

Last Answer : . The position of the arrow.

What does the code 26V-11TX4D mean on a synchro nameplate?

Description : What does the code 26V-11TX4D mean on a synchro nameplate?

Last Answer : It is the third modification of a 26-volt 400-hertz (torque) synchro transmitter whose body diameter is between 1.01 and 1.10 inches

What is the difference between a torque synchro and a control synchro?

Description : What is the difference between a torque synchro and a control synchro?

Last Answer : A torque synchro is used for light loads and a control synchro is used in systems desired to move heavy loads.

What is the primary purpose of a synchro system?

Description : What is the primary purpose of a synchro system?

Last Answer : Precise and rapid transmission of data between equipment and stations.

Why are there so many conceptual classifications of information systems Why are they typically integrated in the information systems found in the real world?

Description : Why are there so many conceptual classifications of information systems Why are they typically integrated in the information systems found in the real world?

Last Answer : There is no any sure and certain way of information system whichis perfect to each and every kind of organizations. Differentnature of organizations has different ways of doing things ... to have reliable and smooth informationmanagement system which is more favorable to their kind oforganization.

Why are there so many conceptual classifications of information systems Why are they typically integrated in the information systems found in the real world?

Description : Why are there so many conceptual classifications of information systems Why are they typically integrated in the information systems found in the real world?

Last Answer : There is no any sure and certain way of information system whichis perfect to each and every kind of organizations. Differentnature of organizations has different ways of doing things ... to have reliable and smooth informationmanagement system which is more favorable to their kind oforganization.

What are the two main classifications of analog instruments?

Description : What are the two main classifications of analog instruments? 

Last Answer : The two main classifications of instruments are, a. Absolute instruments. Example tangent galvanometer. b. Secondary instruments. Example ammeter, voltmeter. Analog instruments are classified according ... Example frequency meter, voltmeter, etc. Principles they work are moving coil, induction. 

What are the indirect cost classifications ?

Description : What are the indirect cost classifications ?

Last Answer : Answer : The classification of indirect expenditure is: - 1. Functional class division 2. Expenditure code of conduct class division 3. Expenditure production based class division 4. Control based class division.

What is the three scale classifications for Maps?

Description : What is the three scale classifications for Maps?

Last Answer : Feel Free to Answer

What are the classifications of being diabetic?

Description : What are the classifications of being diabetic?

Last Answer : The principal two idiopathic forms of Diabetes mellitus are known as types 1 and 2. The term "typeï ½1 diabetes" has universally replaced several former terms, including childhood-onset diabetes, ... disorders with strong family histories that present as typeï ½2 diabetes before 30 years of age.

Wounds are classified according to the likelihood of bacterial contamination. Which of the following statement(s) is/are true concerning wound classifications? a. A clean-contaminated wound would be that associated with an elective colon resection with adequate mechanical and antibiotic bowel preparation b. A contaminated wound would include a resection of obstructed bowel with gross spillage of intestinal contents c. In a clean wound, no viscus is entered d. Antibiotic prophylaxis should be administered for all clean-contaminated and contaminated wounds and selectively in patients involving a clean wound

Description : Wounds are classified according to the likelihood of bacterial contamination. Which of the following statement(s) is/are true concerning wound classifications? a. A clean-contaminated wound would ... all clean-contaminated and contaminated wounds and selectively in patients involving a clean wound

Last Answer : Answer: a, b, c, d Wounds are classified under three classes according to the likelihood of bacterial contamination: 1) clean (no viscus is entered; e.g., herniorrhaphy); 2) clean- ... tenet involves cases in which a prosthetic material may be used (artificial joint, heart valve, tissue patch)

Write the classifications of test conducted on circuit breakers.

Description : Write the classifications of test conducted on circuit breakers.

Last Answer : Type test Routine test Reliability test Commissioning test