What two components make up a simple synchro transmission system?

What two components make up a simple synchro  transmission system?
by

1 Answer

Answer :

A synchro transmitter and a synchro receiver.
by

Related questions

What leads in a simple synchro system are connected to the ac power line?

Description : What leads in a simple synchro system are connected to the ac power line?

Last Answer : The rotor leads.

What are the two major components of a synchro?

Description : What are the two major components of a synchro?

Last Answer : The rotor and the stator.

In a dual-speed synchro system what determines the two specific speeds at which the data will be transmitted?

Description : In a dual-speed synchro system what determines the two specific speeds at which the data will be transmitted?

Last Answer : The gear ratio between the two transmitters.

Name two types of trouble you would expect to find in a newly installed synchro system.

Description : Name two types of trouble you would expect to find in a newly installed synchro system.

Last Answer : Improper wiring and misalignment.

What is the name given to the synchro system that transmits data at two different speeds?

Description : What is the name given to the synchro system that transmits data at two different speeds?

Last Answer : . A dual or double-speed synchro system.

. What type of synchro system is used to transmit very large quantities?

Description : . What type of synchro system is used to transmit very large quantities?

Last Answer : A tri-speed synchro system.

What is the most probable cause of trouble in a synchro system that has all of its receivers reading incorrectly?

Description : What is the most probable cause of trouble in a synchro system that has all of its receivers reading incorrectly?

Last Answer : The transmitter or main bus.

What type of indicator is usually placed in the stator circuit of a torque synchro system?

Description : What type of indicator is usually placed in the stator circuit of a torque synchro system?

Last Answer : An overload indicator.

When you zero a multispeed synchro system which synchro should you zero first?

Description : When you zero a multispeed synchro system which synchro should you zero first?

Last Answer : The coarse synchro.

What is the main reason for using a multispeed synchro system instead of a single-speed synchro system?

Description : What is the main reason for using a multispeed synchro system instead of a single-speed synchro system?

Last Answer : Greater accuracy without the loss of self-synchronous operation.

In a control synchro system, when is the output of the CT reduced to zero?

Description : In a control synchro system, when is the output of the CT reduced to zero?

Last Answer : When the CX and CT rotors are in correspondence.

In a TDX system with standard synchro connections, the TX rotor is at 120º and the TDX rotor is at 40º. What position will the TR indicate?

Description : In a TDX system with standard synchro connections, the TX rotor is at 120º and the TDX rotor is at 40º. What position will the TR indicate?

Last Answer : . 80º.

What is the primary purpose of a synchro system?

Description : What is the primary purpose of a synchro system?

Last Answer : Precise and rapid transmission of data between equipment and stations.

Which of the two synchro designation codes is indicated by 5DG on a synchro nameplate?

Description : Which of the two synchro designation codes is indicated by 5DG on a synchro nameplate?

Last Answer : The Navy prestandard designation code.

Name the two general classifications of synchro systems

Description : Name the two general classifications of synchro systems

Last Answer : Torque and control.

What is the reference point for alignment of all synchro units?

Description : What is the reference point for alignment of all synchro units?

Last Answer : The voltmeter method.

What precaution should you take when substituting a synchro tester in a circuit for a transmitter?

Description : What precaution should you take when substituting a synchro tester in a circuit for a transmitter?

Last Answer : Use only one receiver so as not to overload the tester.

What should you do with a synchro that has a bad set of bearings?

Description : What should you do with a synchro that has a bad set of bearings?

Last Answer : Replace it.

When you zero a synchro with a synchro tester, what is indicated by a jump in the synchro tester's dial when the S1 and S3 leads are momentarily shorted?

Description : When you zero a synchro with a synchro tester, what is indicated by a jump in the synchro tester's dial when the S1 and S3 leads are momentarily shorted?

Last Answer : The synchro under test is not on electrical zero.

What method of zeroing a synchro is perhaps the fastest but NOT necessarily the most accurate?

Description : What method of zeroing a synchro is perhaps the fastest but NOT necessarily the most accurate?

Last Answer : . The electrical lock method.

Why should a synchro be rechecked for zero after it is clamped down?

Description : Why should a synchro be rechecked for zero after it is clamped down?

Last Answer : To ensure that it did not move off zero while it was being clamped.

When is a synchro receiver (TR) properly zeroed?

Description : When is a synchro receiver (TR) properly zeroed?

Last Answer : A TR is zeroed when electrical zero voltages exist across its stator windings at the same time its rotor is on zero or on its mechanical reference position.

What is the purpose of the coarse setting of a synchro?

Description : What is the purpose of the coarse setting of a synchro?

Last Answer : .It ensures the synchro is on 0º, not 180º.

Why are synchro capacitors placed physically close to differentials transmitters and CTs?

Description : Why are synchro capacitors placed physically close to differentials transmitters and CTs?

Last Answer : To keep the connections as short as possible in order to maintain system.

How are synchro capacitors connected in a circuit?

Description : How are synchro capacitors connected in a circuit?

Last Answer : They are delta-connected across the stator windings.

What type of current is eliminated by synchro capacitors?

Description : What type of current is eliminated by synchro capacitors?

Last Answer : Magnetizing current.

What type of synchros usually require the use of synchro capacitors?

Description : What type of synchros usually require the use of synchro capacitors?

Last Answer : TDXs, CDXs, and Cts.

What is the purpose of the synchro capacitor?

Description : What is the purpose of the synchro capacitor?

Last Answer : To improve overall synchro system accuracy by reducing stator currents.

What type of synchro is used in systems requiring large amounts of power and a high degree of accuracy?

Description : What type of synchro is used in systems requiring large amounts of power and a high degree of accuracy?

Last Answer : A control synchro.

What determines whether a differential synchro adds or subtracts?

Description : What determines whether a differential synchro adds or subtracts?

Last Answer : The way the differential synchro is connected in a system is the deciding factor on whether the unit adds or subtracts its inputs.

What method is used to prevent oscillations in large synchro units?

Description : What method is used to prevent oscillations in large synchro units?

Last Answer : Mechanical damping.

What is the physical difference between a synchro transmitter and a synchro receiver?

Description : What is the physical difference between a synchro transmitter and a synchro receiver?

Last Answer : A synchro receiver uses some form of damping to retard excessive oscillations or spinning.

Describe the zero-position of a synchro transmitter.

Description : Describe the zero-position of a synchro transmitter.

Last Answer : The transmitter is in its zero-position when the rotor is aligned with the S2 stator winding.

When will a synchro generate more heat than it is designed to handle?

Description : When will a synchro generate more heat than it is designed to handle?

Last Answer : Synchros have one primary winding that can be turned through 360º and three secondary windings spaced 120º apart.

What unit of measurement refers to the torque of a synchro transmitter

Description : What unit of measurement refers to the torque of a synchro transmitter

Last Answer : Ounce-inches.

On the synchro schematic symbol, what indicates the angular displacement of the rotor?

Description : On the synchro schematic symbol, what indicates the angular displacement of the rotor?

Last Answer : . The position of the arrow.

What does the code 26V-11TX4D mean on a synchro nameplate?

Description : What does the code 26V-11TX4D mean on a synchro nameplate?

Last Answer : It is the third modification of a 26-volt 400-hertz (torque) synchro transmitter whose body diameter is between 1.01 and 1.10 inches

What is the difference between a torque synchro and a control synchro?

Description : What is the difference between a torque synchro and a control synchro?

Last Answer : A torque synchro is used for light loads and a control synchro is used in systems desired to move heavy loads.

Figure 'A' of the diagram shown in the illustration represents a ______________. EL-0092 A. differential transformer B. saturable reactor C. synchro system D. magnetic amplifier

Description : Figure 'A' of the diagram shown in the illustration represents a ______________. EL-0092 A. differential transformer B. saturable reactor C. synchro system D. magnetic amplifier

Last Answer : Answer: C

What type of electrical diagram is used to identify the components of a system?

Description : What type of electrical diagram is used to identify the components of a system?

Last Answer : A pictorial diagram.

List five system design parameters considered when system designers choose the system operational wavelength and link components.

Description : List five system design parameters considered when system designers choose the system operational wavelength and link components.

Last Answer : Launch power, connection losses, bandwidth, cost, and reliability

What are the essential components of a cw receiver system?

Description : What are the essential components of a cw receiver system?

Last Answer : An antenna, tank circuit for tuning, rectifier for detection, filter to give constant output, and an indicator device

What the three basic components make up the typical magnetic amplifier?

Description : What the three basic components make up the typical magnetic amplifier?

Last Answer : Two saturable reactors and a transformer.

A synchro has (A) a 3-phase winding on rotor and a single-phase winding on stator. (B) a 3-phase winding on stator and a commutator winding on rotor. (C) a 3-phase winding on stator and a single-phase winding on rotor. (D) a single-phase winding on stator and a commutator winding on rotor.

Description : A synchro has (A) a 3-phase winding on rotor and a single-phase winding on stator. (B) a 3-phase winding on stator and a commutator winding on rotor. (C) a 3-phase winding on stator and a single-phase winding on rotor. (D) a single-phase winding on stator and a commutator winding on rotor.

Last Answer : Ans: C Synchros : The basic synchro unit called a synchro transmitter. It’s construction similar to that of a Three phase alternator.

The rotor of a synchro transmitter: -

Description : The rotor of a synchro transmitter: -  a) uses a salient pole type of construction b) uses a cylindrical pole type of construction c) may use either salient pole or cylindrical type of construction d) none of the above

Last Answer : The rotor of a synchro transmitter: - uses a salient pole type of construction

A synchro has a: ....

Description : A synchro has a:  (A) 3-phase winding on the rotor and a single-phase winding on the stator  (B) 3-phase winding on the stator and a commutator winding on the rotor  (C) 3-phase ... single-phase winding on the rotor  (D) single-phase winding on the stator and a commutator winding on the rotor

Last Answer : A synchro has a: 3 -phase winding on the stator and a single-phase winding on the rotor 

Components made up exclusively of discrete elements are classified as what type of electronics?

Description : Components made up exclusively of discrete elements are classified as what type of electronics?

Last Answer : Miniature.

The transmission of still images over an electrical communications system is known as what?

Description : The transmission of still images over an electrical communications system is known as what?

Last Answer : Facsimile.

. What is the primary advantage of an fsk transmission system?

Description : . What is the primary advantage of an fsk transmission system?

Last Answer : Resistance to noise interference.

Choose two appropriate auxiliary components of a HVDC transmission system from the following P. D.C line

Description : Choose two appropriate auxiliary components of a HVDC transmission system from the following P. D.C line inductor Q. A.C line inductor R. Reactive power sources S. Distance relays on D.C line T. Series capacitance on A.C. line  (A) P and Q (B) P and R (C) Q and S (D) S and T

Last Answer : Choose two appropriate auxiliary components of a HVDC transmission system from the following P. D.C line inductor Q. A.C line inductor R. Reactive power sources S. Distance relays on D.C line T. Series capacitance on A.C. line  (A) P and Q (B) P and R (C) Q and S (D) S and T