What is the purpose of the coarse setting of a synchro?

What is the purpose of the coarse setting of a synchro?
by

1 Answer

Answer :

.It ensures the synchro is on 0º, not 180º.
by

Related questions

What is the purpose of the synchro capacitor?

Description : What is the purpose of the synchro capacitor?

Last Answer : To improve overall synchro system accuracy by reducing stator currents.

What is the primary purpose of a synchro system?

Description : What is the primary purpose of a synchro system?

Last Answer : Precise and rapid transmission of data between equipment and stations.

What is the reference point for alignment of all synchro units?

Description : What is the reference point for alignment of all synchro units?

Last Answer : The voltmeter method.

. What type of synchro system is used to transmit very large quantities?

Description : . What type of synchro system is used to transmit very large quantities?

Last Answer : A tri-speed synchro system.

In a dual-speed synchro system what determines the two specific speeds at which the data will be transmitted?

Description : In a dual-speed synchro system what determines the two specific speeds at which the data will be transmitted?

Last Answer : The gear ratio between the two transmitters.

What precaution should you take when substituting a synchro tester in a circuit for a transmitter?

Description : What precaution should you take when substituting a synchro tester in a circuit for a transmitter?

Last Answer : Use only one receiver so as not to overload the tester.

What is the most probable cause of trouble in a synchro system that has all of its receivers reading incorrectly?

Description : What is the most probable cause of trouble in a synchro system that has all of its receivers reading incorrectly?

Last Answer : The transmitter or main bus.

What type of indicator is usually placed in the stator circuit of a torque synchro system?

Description : What type of indicator is usually placed in the stator circuit of a torque synchro system?

Last Answer : An overload indicator.

Name two types of trouble you would expect to find in a newly installed synchro system.

Description : Name two types of trouble you would expect to find in a newly installed synchro system.

Last Answer : Improper wiring and misalignment.

What should you do with a synchro that has a bad set of bearings?

Description : What should you do with a synchro that has a bad set of bearings?

Last Answer : Replace it.

When you zero a synchro with a synchro tester, what is indicated by a jump in the synchro tester's dial when the S1 and S3 leads are momentarily shorted?

Description : When you zero a synchro with a synchro tester, what is indicated by a jump in the synchro tester's dial when the S1 and S3 leads are momentarily shorted?

Last Answer : The synchro under test is not on electrical zero.

What method of zeroing a synchro is perhaps the fastest but NOT necessarily the most accurate?

Description : What method of zeroing a synchro is perhaps the fastest but NOT necessarily the most accurate?

Last Answer : . The electrical lock method.

When you zero a multispeed synchro system which synchro should you zero first?

Description : When you zero a multispeed synchro system which synchro should you zero first?

Last Answer : The coarse synchro.

Why should a synchro be rechecked for zero after it is clamped down?

Description : Why should a synchro be rechecked for zero after it is clamped down?

Last Answer : To ensure that it did not move off zero while it was being clamped.

When is a synchro receiver (TR) properly zeroed?

Description : When is a synchro receiver (TR) properly zeroed?

Last Answer : A TR is zeroed when electrical zero voltages exist across its stator windings at the same time its rotor is on zero or on its mechanical reference position.

What is the main reason for using a multispeed synchro system instead of a single-speed synchro system?

Description : What is the main reason for using a multispeed synchro system instead of a single-speed synchro system?

Last Answer : Greater accuracy without the loss of self-synchronous operation.

What is the name given to the synchro system that transmits data at two different speeds?

Description : What is the name given to the synchro system that transmits data at two different speeds?

Last Answer : . A dual or double-speed synchro system.

Why are synchro capacitors placed physically close to differentials transmitters and CTs?

Description : Why are synchro capacitors placed physically close to differentials transmitters and CTs?

Last Answer : To keep the connections as short as possible in order to maintain system.

How are synchro capacitors connected in a circuit?

Description : How are synchro capacitors connected in a circuit?

Last Answer : They are delta-connected across the stator windings.

What type of current is eliminated by synchro capacitors?

Description : What type of current is eliminated by synchro capacitors?

Last Answer : Magnetizing current.

What type of synchros usually require the use of synchro capacitors?

Description : What type of synchros usually require the use of synchro capacitors?

Last Answer : TDXs, CDXs, and Cts.

In a control synchro system, when is the output of the CT reduced to zero?

Description : In a control synchro system, when is the output of the CT reduced to zero?

Last Answer : When the CX and CT rotors are in correspondence.

What type of synchro is used in systems requiring large amounts of power and a high degree of accuracy?

Description : What type of synchro is used in systems requiring large amounts of power and a high degree of accuracy?

Last Answer : A control synchro.

What determines whether a differential synchro adds or subtracts?

Description : What determines whether a differential synchro adds or subtracts?

Last Answer : The way the differential synchro is connected in a system is the deciding factor on whether the unit adds or subtracts its inputs.

What leads in a simple synchro system are connected to the ac power line?

Description : What leads in a simple synchro system are connected to the ac power line?

Last Answer : The rotor leads.

What two components make up a simple synchro transmission system?

Description : What two components make up a simple synchro transmission system?

Last Answer : A synchro transmitter and a synchro receiver.

What method is used to prevent oscillations in large synchro units?

Description : What method is used to prevent oscillations in large synchro units?

Last Answer : Mechanical damping.

What is the physical difference between a synchro transmitter and a synchro receiver?

Description : What is the physical difference between a synchro transmitter and a synchro receiver?

Last Answer : A synchro receiver uses some form of damping to retard excessive oscillations or spinning.

Describe the zero-position of a synchro transmitter.

Description : Describe the zero-position of a synchro transmitter.

Last Answer : The transmitter is in its zero-position when the rotor is aligned with the S2 stator winding.

When will a synchro generate more heat than it is designed to handle?

Description : When will a synchro generate more heat than it is designed to handle?

Last Answer : Synchros have one primary winding that can be turned through 360º and three secondary windings spaced 120º apart.

What unit of measurement refers to the torque of a synchro transmitter

Description : What unit of measurement refers to the torque of a synchro transmitter

Last Answer : Ounce-inches.

In a TDX system with standard synchro connections, the TX rotor is at 120º and the TDX rotor is at 40º. What position will the TR indicate?

Description : In a TDX system with standard synchro connections, the TX rotor is at 120º and the TDX rotor is at 40º. What position will the TR indicate?

Last Answer : . 80º.

What are the two major components of a synchro?

Description : What are the two major components of a synchro?

Last Answer : The rotor and the stator.

On the synchro schematic symbol, what indicates the angular displacement of the rotor?

Description : On the synchro schematic symbol, what indicates the angular displacement of the rotor?

Last Answer : . The position of the arrow.

Which of the two synchro designation codes is indicated by 5DG on a synchro nameplate?

Description : Which of the two synchro designation codes is indicated by 5DG on a synchro nameplate?

Last Answer : The Navy prestandard designation code.

What does the code 26V-11TX4D mean on a synchro nameplate?

Description : What does the code 26V-11TX4D mean on a synchro nameplate?

Last Answer : It is the third modification of a 26-volt 400-hertz (torque) synchro transmitter whose body diameter is between 1.01 and 1.10 inches

What is the difference between a torque synchro and a control synchro?

Description : What is the difference between a torque synchro and a control synchro?

Last Answer : A torque synchro is used for light loads and a control synchro is used in systems desired to move heavy loads.

Name the two general classifications of synchro systems

Description : Name the two general classifications of synchro systems

Last Answer : Torque and control.

What should a voltmeter read when a TX is set on coarse zero?

Description : What should a voltmeter read when a TX is set on coarse zero?

Last Answer : Approximately 37 volts.

Besides setting up the meter for expected voltage ranges, what must be strictly observed when taking dc voltage readings?

Description : Besides setting up the meter for expected voltage ranges, what must be strictly observed when taking dc voltage readings?

Last Answer : Polarit

Figure 'A' of the diagram shown in the illustration represents a ______________. EL-0092 A. differential transformer B. saturable reactor C. synchro system D. magnetic amplifier

Description : Figure 'A' of the diagram shown in the illustration represents a ______________. EL-0092 A. differential transformer B. saturable reactor C. synchro system D. magnetic amplifier

Last Answer : Answer: C

A synchro has (A) a 3-phase winding on rotor and a single-phase winding on stator. (B) a 3-phase winding on stator and a commutator winding on rotor. (C) a 3-phase winding on stator and a single-phase winding on rotor. (D) a single-phase winding on stator and a commutator winding on rotor.

Description : A synchro has (A) a 3-phase winding on rotor and a single-phase winding on stator. (B) a 3-phase winding on stator and a commutator winding on rotor. (C) a 3-phase winding on stator and a single-phase winding on rotor. (D) a single-phase winding on stator and a commutator winding on rotor.

Last Answer : Ans: C Synchros : The basic synchro unit called a synchro transmitter. It’s construction similar to that of a Three phase alternator.

The rotor of a synchro transmitter: -

Description : The rotor of a synchro transmitter: -  a) uses a salient pole type of construction b) uses a cylindrical pole type of construction c) may use either salient pole or cylindrical type of construction d) none of the above

Last Answer : The rotor of a synchro transmitter: - uses a salient pole type of construction

A synchro has a: ....

Description : A synchro has a:  (A) 3-phase winding on the rotor and a single-phase winding on the stator  (B) 3-phase winding on the stator and a commutator winding on the rotor  (C) 3-phase ... single-phase winding on the rotor  (D) single-phase winding on the stator and a commutator winding on the rotor

Last Answer : A synchro has a: 3 -phase winding on the stator and a single-phase winding on the rotor 

Briefly point out the purpose of setting up the United Nations Organisation. -SST 10th

Description : Briefly point out the purpose of setting up the United Nations Organisation. -SST 10th

Last Answer : United Nations Organisation was formed with its purpose to maintain peace and security, develop friendly relations and achieve international cooperation. It was to be center for harmonizing the actions of nations for achievement of common ends.

What is the purpose of setting short term goals ?

Description : What is the purpose of setting short term goals ?

Last Answer : The purpose of setting short term goals is to achieve long term goals.

The freezer in a refrigerator is fitted near the top (a) to keep it away from the hot compressor which is near the bottom (b) because of convenience (c) so that it can cool the whole interior by setting up convection currents (d) without any specific purpose

Description : The freezer in a refrigerator is fitted near the top (a) to keep it away from the hot compressor which is near the bottom (b) because of convenience (c) so that it can cool the whole interior by setting up convection currents (d) without any specific purpose

Last Answer : Ans:(c)

When using a multimeter for resistance measurements, it should be calibrated by clipping the loose ends of the leads together and _____________. A. setting the instrument pointer at 'zero' ohms B. adjusting the line voltage to calibrate the instrument C. plugging each end of one test lead into the plus and minus terminals D. using a special purpose resistance measuring instrument (a bridge)

Description : When using a multimeter for resistance measurements, it should be calibrated by clipping the loose ends of the leads together and _____________. A. setting the instrument pointer at 'zero' ohms B. ... the plus and minus terminals D. using a special purpose resistance measuring instrument (a bridge)

Last Answer : Answer: A

The purpose of the bias winding in figure 'B' shown in the illustration is for ____________. EL-0091 A. changing the direction of current in the control winding B. setting the operating point of the device C. allowing the use of either AC or DC in the load circuit D. changing the direction of current through the load

Description : The purpose of the bias winding in figure 'B' shown in the illustration is for ____________. EL-0091 A. changing the direction of current in the control winding B. setting the operating point of the ... use of either AC or DC in the load circuit D. changing the direction of current through the load

Last Answer : Answer: B

What is the purpose of static starter? How current setting adopted?

Description : What is the purpose of static starter? How current setting adopted?

Last Answer : The static starter limits the starting current of the motor to 2.5 times the motor rated current instead of 6 times the rated current. If the motor is directly on UPS, the UPS fuse will blow, ... set to limit the starting current. This is achieved by firing angle control of back to back thyristor.