What type of feedback is usually caused by interelectrode capacitance?

What type of feedback is usually caused by interelectrode  capacitance?
by

1 Answer

Answer :

Negative (degenerative) feedback
by

Related questions

What type of feedback is usually caused by the base-to collector interelectrode capacitance?

Description : What type of feedback is usually caused by the base-to collector interelectrode capacitance?

Last Answer : Degenerative or negative

Moving tube electrodes apart to decrease interelectrode capacitance causes an increase in the effect of what property?

Description : Moving tube electrodes apart to decrease interelectrode capacitance causes an increase in the effect of what property?

Last Answer : Transit time

What happens to the impedance of interelectrode capacitance as frequency increases?

Description : What happens to the impedance of interelectrode capacitance as frequency increases?

Last Answer : Impedance decreases.

How does the addition of a screen grid in a tetrode reduce interelectrode capacitance?

Description : How does the addition of a screen grid in a tetrode reduce interelectrode capacitance?

Last Answer : The interelectrode capacitance (cpg) is divided between two series capacitances; thus, cpg is greatly reduced.

What type of feedback aids an input signal?

Description : What type of feedback aids an input signal?

Last Answer : Regenerative or positive

A two-cavity klystron without a feedback path will operate as what type of circuit?

Description : A two-cavity klystron without a feedback path will operate as what type of circuit?

Last Answer : Amplifier.

When an unknown capacitance is tested with a bridge, what is the value of Cx if R1 equals 70 ohms, R2 equals 150 ohms, and Cs equals 550 microfarads?

Description : When an unknown capacitance is tested with a bridge, what is the value of Cx if R1 equals 70 ohms, R2 equals 150 ohms, and Cs equals 550 microfarads?

Last Answer : 256 microfarads.

What effect does an increase in capacitance have on a capacitor’s opposition to current flow?

Description : What effect does an increase in capacitance have on a capacitor’s opposition to current flow?

Last Answer : Opposition to current flow decreases.

When the reverse bias on a varactor is increased, what happens to the effective capacitance?

Description : When the reverse bias on a varactor is increased, what happens to the effective capacitance?

Last Answer : Capacitance decreases.

A transmission line is said to have distributed constants of inductance, capacitance, and resistance along the line. What units of measurement are used to express these constants?

Description : A transmission line is said to have distributed constants of inductance, capacitance, and resistance along the line. What units of measurement are used to express these constants?

Last Answer : Inductance is expressed in micro henrys per unit length, capacitance is expressed in picofarads per unit length, and resistance is expressed in ohms per unit length.

. What are two of the three physical factors that determine the values of capacitance and inductance of a transmission line?

Description : . What are two of the three physical factors that determine the values of capacitance and inductance of a transmission line?

Last Answer : (1) Type of line used, (2) dielectric in the line, and (3) length of line.

Trade-offs between competing effects are necessary for high speed response. Which competing effect (fast transit time, low capacitance, or high quantum efficiency) requires a thin active area?

Description : Trade-offs between competing effects are necessary for high speed response. Which competing effect (fast transit time, low capacitance, or high quantum efficiency) requires a thin active area?

Last Answer : Fast transit time.

Should the capacitance of the photodetector be kept small or large to prevent the RC time constant from limiting the response time?

Description : Should the capacitance of the photodetector be kept small or large to prevent the RC time constant from limiting the response time?

Last Answer : Small

What happens to the value of XC as capacitance increases

Description : What happens to the value of XC as capacitance increases

Last Answer : XC decreases.

Examine the three capacitors shown below. What is the capacitance of each?

Description : Examine the three capacitors shown below. What is the capacitance of each?

Last Answer : a. 26µF or 260,00pF b. 630pF c. 9600pF

State three factors that affect the capacitance of a capacitor.

Description : State three factors that affect the capacitance of a capacitor.

Last Answer : a. The area of the plates. b. The distance between the plates. c. The dielectric constant of the material between the plates.

State three factors that affect the capacitance of a capacitor.

Description : State three factors that affect the capacitance of a capacitor.

Last Answer : a. The area of the plates. b. The distance between the plates. c. The dielectric constant of the material between the plates.

In the inverting configuration, the input signal is applied to the (a) (inverting, noninverting) input and the feedback signal is applied to the (b) (inverting, noninverting) input.

Description : In the inverting configuration, the input signal is applied to the (a) (inverting, noninverting) input and the feedback signal is applied to the (b) (inverting, noninverting) input.

Last Answer : a. Inverting. b. Inverting.

select the correct response from the choices given in the parentheses. Q-20. In a closed-loop configuration the output signal is determined by (the input signal, the feedback signal, both).

Description : select the correct response from the choices given in the parentheses. Q-20. In a closed-loop configuration the output signal is determined by (the input signal, the feedback signal, both).

Last Answer : Both the input signal and the feedback signal.

In a typical velocity servo block diagram what device is placed in the feedback loop that is not present in the position servo?

Description : In a typical velocity servo block diagram what device is placed in the feedback loop that is not present in the position servo?

Last Answer : Tachometer.

Which components provide the regenerative feedback signal in the phase-shift oscillator?

Description : Which components provide the regenerative feedback signal in the phase-shift oscillator?

Last Answer : Resistor-capacitor networks.

Which oscillator uses tapped capacitors for feedback?

Description : Which oscillator uses tapped capacitors for feedback?

Last Answer : Colpitts.

Which oscillator uses a tapped inductor for feedback?

Description : Which oscillator uses a tapped inductor for feedback?

Last Answer : Hartley.

Which oscillator uses a tickler coil for feedback?

Description : Which oscillator uses a tickler coil for feedback?

Last Answer : Armstrong.

What are the two methods used for feedback coupling?

Description : What are the two methods used for feedback coupling?

Last Answer : Inductive and capacitive.

When a megohmmeter is used to test the insulation of a large motor, the initial dip of the pointer toward 'zero' is caused by ____________. A. good insulation B. the capacitance of the windings C. the leakage of the current along the surface of dirty insulation D. the dielectric-absorption effect of the insulation

Description : When a megohmmeter is used to test the insulation of a large motor, the initial dip of the pointer toward 'zero' is caused by ____________. A. good insulation B. the capacitance of the ... of the current along the surface of dirty insulation D. the dielectric-absorption effect of the insulation

Last Answer : Answer: B

When a megohmmeter is used to test the dielectric strength of wire insulation, the initial dip of the pointer toward 'zero' is caused by _____________. A. good insulation B. the leakage of current along the surface of dirty insulation C. the capacitance of the circuit D. the dielectric absorption effect of the insulation

Description : When a megohmmeter is used to test the dielectric strength of wire insulation, the initial dip of the pointer toward 'zero' is caused by _____________. A. good insulation B. the leakage of ... of dirty insulation C. the capacitance of the circuit D. the dielectric absorption effect of the insulation

Last Answer : Answer: C

$ Coenzymes are usually proteins ! The term feedback refers to the effect of enzyme concentration on its rate of reaction.

Description : $ Coenzymes are usually proteins ! The term feedback refers to the effect of enzyme concentration on its rate of reaction.

Last Answer : $ Coenzymes are usually proteins ! The term feedback refers to the effect of enzyme concentration on its rate ... wrong D. If both As and R are wrong.

The retailer is usually in an excellent position to 1. make the most profits in the channel 2. be the channel leader 3. gain feedback from consumers 4. co-ordinate the production strategy 5. none of these

Description : The retailer is usually in an excellent position to 1. make the most profits in the channel 2. be the channel leader 3. gain feedback from consumers 4. co-ordinate the production strategy 5. none of these

Last Answer : gain feedback from consumers

The retailer is usually in an excellent position to A)make the most profits in the channel. B)be the channel leader. C)gain feedback from consumers. D)co -ordinate the production strategy.

Description : The retailer is usually in an excellent position to A)make the most profits in the channel. B)be the channel leader. C)gain feedback from consumers. D)co-ordinate the production strategy.

Last Answer : C)gain feedback from consumers.

Enzyme inhibition caused by a substance resembling substrate molecule is (A) Competitive inhibition (B) Non-competitive inhibition (C) Feedback inhibition (D) Allosteric inhibition

Description : Enzyme inhibition caused by a substance resembling substrate molecule is (A) Competitive inhibition (B) Non-competitive inhibition (C) Feedback inhibition (D) Allosteric inhibition

Last Answer : Answer : A

What type of indicator is usually placed in the stator circuit of a torque synchro system?

Description : What type of indicator is usually placed in the stator circuit of a torque synchro system?

Last Answer : An overload indicator.

What type of synchros usually require the use of synchro capacitors?

Description : What type of synchros usually require the use of synchro capacitors?

Last Answer : TDXs, CDXs, and Cts.

Which type of optical source usually lacks reflective facets and in some cases are designed to suppress reflections back into the active region?

Description : Which type of optical source usually lacks reflective facets and in some cases are designed to suppress reflections back into the active region?

Last Answer : LED.

A computer that is designed to perform a specific operation and usually satisfies the needs of a particular type of problem, is said to be what type of computer?

Description : A computer that is designed to perform a specific operation and usually satisfies the needs of a particular type of problem, is said to be what type of computer?

Last Answer : Special-purpose.

What type coupling is usually used to couple the output from a power amplifier?

Description : What type coupling is usually used to couple the output from a power amplifier?

Last Answer : Transformer coupling.

Losses caused by skin effect and the I2R (power) loss are classified as what type of loss?

Description : Losses caused by skin effect and the I2R (power) loss are classified as what type of loss?

Last Answer : Copper losses.

The leads to the primary and the high-voltage secondary windings of a power transformer usually are of what color?

Description : The leads to the primary and the high-voltage secondary windings of a power transformer usually are of what color?

Last Answer : Primary leads-black; secondary leads red.

What is the range of values usually chosen for a choke?

Description : What is the range of values usually chosen for a choke?

Last Answer : To determine that all data can be processed correctly and that the output is correct.

Why is the range capability of 3D radar usually less than the range of 2D radar?

Description : Why is the range capability of 3D radar usually less than the range of 2D radar?

Last Answer : Higher operating frequency

What is the value usually chosen for a filter choke?

Description : What is the value usually chosen for a filter choke?

Last Answer : 1 to 20 henries.

Multimode optical fibers can have a step-index or graded index refractive index profile. Which fiber, multimode step-index or multimode graded-index fiber, usually performs better?

Description : Multimode optical fibers can have a step-index or graded index refractive index profile. Which fiber, multimode step-index or multimode graded-index fiber, usually performs better?

Last Answer : Multimode graded-index fiber

How are PIN photodiodes usually biased?

Description : How are PIN photodiodes usually biased?

Last Answer : Reverse-biased.

How many degrees-of-freedom does a rate gyro usually have?

Description : How many degrees-of-freedom does a rate gyro usually have?

Last Answer : One.

Primary storage capacities are usually specified in what unit of measure?

Description : Primary storage capacities are usually specified in what unit of measure?

Last Answer : Number of bytes.

How are alternators usually rated?

Description : How are alternators usually rated?

Last Answer : Kilovolt-amperes (volt amperes).

The basic control action of a magnetic amplifier depends upon _____________. A. variations in the load capacitance B. changes in inductance C. type of core material D. construction of the core

Description : The basic control action of a magnetic amplifier depends upon _____________. A. variations in the load capacitance B. changes in inductance C. type of core material D. construction of the core

Last Answer : Answer: B

Explain the capacitance type level measurement method with neat diagram.

Description : Explain the capacitance type level measurement method with neat diagram.

Last Answer : Capacitance level indicator  Explanation: It consists of two conductors separated from each other by dielectric material between them. There is an insulated capacitance probe fixed near and parallel to ... , the dielectric constant changes due to which capacitance changes. Thus any change.

State the effects of errors in dynamometer type wattmeter due to i) pc- inductance ii) pc- capacitance iii) mutual inductance iv) Connection.

Description : State the effects of errors in dynamometer type wattmeter due to i) pc- inductance ii) pc- capacitance iii) mutual inductance iv) Connection.

Last Answer : Errors in wattmeter:  i) pc - inductance: Pressure coil inductance causes wattmeter to read more power than actual .  ii) pc-capacitance: The wattmeter reads less power.  iii) ... iv) Connection: In uncompensated wattmeter , the reading of wattmeter includes the powerloss in coils. 

A suspension type insulator has three units with self-capacitance C and ground capacitance of

Description : A suspension type insulator has three units with self-capacitance C and ground capacitance of 0.2 C having a string efficiency of   (a) 80% (b) 82% (c)78% (d) 76% 

Last Answer : A suspension type insulator has three units with self-capacitance C and ground capacitance of 0.2 C having a string efficiency of 78%