The formula to find I when the values of V and R are known is?

A.I = VR

B.I = R/V

C.V = IR

D.I = V/R

1 Answer

Answer :

The formula to find I when the values of V and R are known is?

A.I = VR

B.I = R/V

C.V = IR

D.I = V/R

Related questions

Description : When the turns ratio of a transformer is 20 and the primary ac voltage is 12 V, the secondary voltage is? A.12 V B.120 V C.240 V D.2,400 V

Last Answer : When the turns ratio of a transformer is 20 and the primary ac voltage is 12 V, the secondary voltage is? A.12 V B.120 V C.240 V D.2,400 V

Description : The primary coil of a transformer is connected to a 60 V ac source. The secondary coil is connected to a 330 ohms load. The turns ratio is 3:1. What is the secondary voltage? A.2 V B.20 V C.180 V D.18 V

Last Answer : The primary coil of a transformer is connected to a 60 V ac source. The secondary coil is connected to a 330 ohms load. The turns ratio is 3:1. What is the secondary voltage? A.2 V B.20 V C.180 V D.18 V

Description : A resistance of 3.3 M ohms is connected across a 500 V source. The resulting current is approximately? A.15.1 μA B.151 μA C.66 mA D.660 mA

Last Answer : A

Description : The average value of a 12 V peak sine wave over one complete cycle is? A.0 V B.1.27 V C.7.64 V D.6.37 V

Last Answer : The average value of a 12 V peak sine wave over one complete cycle is? A.0 V B.1.27 V C.7.64 V D.6.37 V

Description : Two series resistors are connected to an ac source. If there are 7.5 V rms across one resistor and 4.2 V rms across the other, the peak source voltage is? A.16.54 V B.1.65 V C.10.60 V D.5.93 V

Last Answer : Two series resistors are connected to an ac source. If there are 7.5 V rms across one resistor and 4.2 V rms across the other, the peak source voltage is? A.16.54 V B.1.65 V C.10.60 V D.5.93 V

Description : You are measuring the current in a circuit that is operated on an 18 V battery. The ammeter reads 40 mA. Later you notice the current has dropped to 20 mA. How much has the voltage changed? A.9 V B.900 mV C.0 V D.18 V

Last Answer : You are measuring the current in a circuit that is operated on an 18 V battery. The ammeter reads 40 mA. Later you notice the current has dropped to 20 mA. How much has the voltage changed? A.9 V B.900 mV C.0 V D.18 V

Description : How much resistance is required to limit the current from a 12 V battery to 3.6 mA? A.3.3 k ohms B.33 k ohms C.2.2 k ohms D.22 k ohms

Last Answer : How much resistance is required to limit the current from a 12 V battery to 3.6 mA? A.3.3 k ohms B.33 k ohms C.2.2 k ohms D.22 k ohms

Description : Approximately how many milliamperes of current flow through a circuit with a 40 V source and 6.8 k ohms of resistance? A.27.2 mA B.59 mA C.5.9 mA D.590 mA

Last Answer : Approximately how many milliamperes of current flow through a circuit with a 40 V source and 6.8 k ohms of resistance? A.27.2 mA B.59 mA C.5.9 mA D.590 mA

Description : If the peak value of a sine wave is 30 V, the rms value is? A.19.08 V B.7.07 V C.0.707 V D.23.10 V

Last Answer : If the peak value of a sine wave is 30 V, the rms value is? A.19.08 V B.7.07 V C.0.707 V D.23.10 V

Description : The current through a flashlight bulb is 40 mA and the total battery voltage is 4.5 V. The resistance of the bulb is approximately? A.112 ohms B.11.2 ohms C.1.2 ohms D.18 ohms

Last Answer : 112ohm

Description : An electric heater draws 3.5 A from a 110 V source. The resistance of the heating element is approximately? A.385 ohms B.38.5ohms C.3.1 ohms D.31 ohms

Last Answer : 31ohns

Description : Two bulbs of 500 W and 200 W rated at 250 V will have resistance ratio as?

Last Answer : Two bulbs of 500 W and 200 W rated at 250 V will have resistance ratio as 2 : 5.

Description : Three 60 W bulbs are in parallel across the 60 V power line. If one bulb burns open?

Last Answer : Three 60 W bulbs are in parallel across the 60 V power line. If one bulb burns open the other two bulbs will light.

Description : Frame the formula for the volume (v) of a hemisphere given by two-thirds o the product of `pi` and cube of radius (r).

Last Answer : Frame the formula for the volume (v) of a hemisphere given by two-thirds o the product of `pi` and cube of radius (r).

Description : Frame the formula for the volume (v) of a cylinder given by the product of `pi`, square of radius (r) and height (h).

Last Answer : Frame the formula for the volume (v) of a cylinder given by the product of `pi`, square of radius (r) and height (h).

Description : If air is at pressure, p, of 3200 lbf/ft2 , and at a temperature, T, of 800 ˚R, what is the specific volume, v? (R=5303 ft-lbf/lbm-˚R, and air can be modeled as an ideal gas.)  A.9.8 ft^3/lbm  B.11.2 ft^3/lbm  C.13.33 ft^3/lbm  D.14.2 ft^3/lbm Formula: pv = RT v = RT / p

Last Answer : 13.33 ft^3/lbm

Description : What is the formula for determining total reactance in a series circuit where the values of XC and XL are known?

Last Answer : X = XL – XC or X = XC - XL

Description : A two-terminal variable resistor is known as a? A.potentiometer B.thermistor C.rheostat D.wiper

Last Answer : A two-terminal variable resistor is known as a? A.potentiometer B.thermistor C.rheostat D.wiper

Description : An instrument which detects electric current is known as?

Last Answer : An instrument which detects electric current is known as galvanometer.

Description : With the usual meanings of letters, the equation V = 400 I (D10²/4) is used for determining the velocity of ground water flow in metres per day. It is known as (A) Meinzer's formula (B) Slichter's formula (C) Darcy's formula (D) Hazen's formula

Last Answer : Answer: Option B

Description : The equation V = (1000 ID10²/60) × (1.8T + 42) which is used for determining the velocity of ground water flow in metres per day is known as (A) Meinzer's formula (B) Slichter's formula (C) Darcy's formula (D) Hazen formula

Last Answer : Answer: Option D

Description : The formula HL  = n²V²L/R 4/3 for the head loss in conduits is generally known as  (A) Hazen-William's formula  (B) Manning's formula  (C) Darcy-Weisbach formula  (D) Nikuradse formula

Last Answer : (B) Manning's formula 

Description : For calculating the allowable stress of long columns. The empirical formula 0 y/n) (1 - a l/r), is  known as  (A) Straight line formula  (B) Parabolic formula  (C) Perry's formula  (D) Rankine's formula 

Last Answer : (A) Straight line formula 

Description : For calculating the permissible stress 0 y /[(1 + a(l/r)²]is the empirical formula, known as  (A) Straight line formula  (B) Parabolic formula  (C) Perry's formula  (D) Rankine's formula 

Last Answer : (D) Rankine's formula 

Description : For calculating the allowable stress of long columns 0 y/n [1 - a (1/r)²]is the empirical formula,  known as  (A) Straight line formula  (B) Parabolic formula  (C) Perry's formula  (D) Rankine's formula 

Last Answer : (B) Parabolic formula 

Description : Write down the formula for adding values of cells A1 to A5. -Technology

Last Answer : Formula for adding values of cells A1 to A5 would be =SUM(A1 : A5).

Description : The number of function points of a proposed system is calculated as 500. Suppose that the system is planned to be developed in Java and the LOC/FP ratio of Java is 50. Estimate the effort (E) required to ... ) 25 person months (B) 75 person months (C) 62.5 person months (D) 72.5 person months

Last Answer : (C) 62.5 person months 

Description : Determine the values of equilibrium constant (Kc) and ΔG° for the following reaction : Ni(s) + 2Ag+ (aq) → Ni2+ (aq) + 2Ag(s), E° = 1.05 V (1F = 96500 C mol-1 -Chemistry

Last Answer : According to the formula ΔG° = -nFE° = – 2 × 96500 ×1.05 or ΔG° = -202650 J mol-1 = -202.65 KJ mol-1 Now ΔG° ⇒ -202650 J Mol-1 R = 8.314 J/Mol/K, T = 298 K

Description : What is the charge on each capacitor when a 150 V is applied across two capacitors with values 5 μF and 10 μF, connected in series? A) 500 μC B) 0.5 μC C) 0.5 C D) None of these

Last Answer : What is the charge on each capacitor when a 150 V is applied across two capacitors with values 5 μF and 10 μF, connected in series? A) 500 μC B) 0.5 μC C) 0.5 C D) None of these

Description : If nCr : nCr+1 = 1 : 2 and nCr+1 : nCr+2 = 2 : 3 determine the values of n and r. -Maths 9th

Last Answer : answer:

Description : The equivalent resistance of two resistor connected in series is `6 Omega` and their equivalent resistance is `(4)/(3)Omega`. What are the values of r

Last Answer : The equivalent resistance of two resistor connected in series is `6 Omega` and their equivalent resistance is `(4 ... , 2 Omega` D. `6 Omega, 2 Omega`

Description : If two values in algebra are beside each other Do you have to multiply them For example m and r are beside each other.?

Last Answer : Usually if two variables in the same script are next to oneanother and there is not a variable which is defined as theircombination (concatenation), then they are to be multipliedtogether. Thus mr is m times r - unless mr is defined to be thelower case, abbreviated title for a man.

Description : If the values of 'C' and 'R' shown in the illustration were 1 microfarad and 100 kOhms respectively, at what listed time would 'C' be considered fully charged? EL-0086 A. 0.1 second B. 0.2 second C. 0.5 second D. 5 seconds

Last Answer : Answer: C

Description : If the values of 'C' and 'R' shown in the illustration were 1 microfarad and 100 kOhms, which of the listed time intervals would equal one 'time constant'? EL-0086 A. 0.1 second B. 0.2 second C. 0.5 second D. 5.0 seconds

Last Answer : Answer: A

Description : If the values of 'C' and 'R' shown in the illustration were 1 microfarad and 3 Megohms respectively, at what listed time would 'C' be considered fully charged? EL-0086 A. 0.33 second B. 3 seconds C. 6 seconds D. 15 seconds

Last Answer : Answer: D

Description : If the values of C and R shown in the illustration were 1-microfarad and 3- Megohms respectively, which of the listed intervals would equal one 'time constant'? EL-0086 A. 0.33 second B. 3 seconds C. 6 seconds D. 15 seconds

Last Answer : Answer: B

Description : The values of the remainder r, when a positive integer a is divided by 3 are (a) 0, 1, 2(b) Only 1 (c) Only 0 or 1 (d) 1, 2

Last Answer : (a) 0, 1, 2

Description : In a queue, the initial values of front pointer f rare pointer r should be ….. and …….. respectively. A) 0 and 1 B) 0 and -1 C) -1 and 0 D) 1 and 0

Last Answer : B) 0 and -1

Description : The difference in the osmotic pressures of one molar solutions of different compounds in a given solvent at a given temperature results from? w) Different values for R x) Different values for Avogadro's number y) Ionization or dissociation z) None of the above

Last Answer : ANSWER: Y -- IONIZATION OR DISSOCIATION 

Description : For a database relation R(a, b, c, d) where the domains of a, b, c, d include only the atomic values. The functional dependency a → c, b → d holds in the following relation (A) In 1NF not in 2NF (B) In 2NF not in 3NF (C) In 3NF (D) In 1NF

Last Answer : (A) In 1NF not in 2NF 

Description : Consider the following Entity-Relationship (E-R) diagram and three possible relationship sets (I, II and III) for this E-R diagram: If different symbols stand for different values (e.g., t1 is definitely not equal to t2 ... diagram ? (A) I only (B) I and II only (C) II only (D) I, II and III

Last Answer : (A) I only

Description : For a database relation R(A,B,C,D) where the domains of A,B,C and D include only atomic values, only the following functional dependencies and those that can be inferred from them are: A→C B→D The ... form but not in third normal form (4) Both in second normal form as well as in third normal form

Last Answer : First normal form but not in second normal form

Description : A series R-L-C Circuit has a resonant frequency of 1000 Hz. If the values of R, L and C are doubled, the new resonant frequency is

Last Answer : A series R-L-C Circuit has a resonant frequency of 1000 Hz. If the values of R, L and C are doubled, the new resonant frequency is 500 Hz

Description : Inductance

Last Answer : Inductance

Description : Resistance

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Description : please answer

Last Answer : 360 degree . 180 Degree Positive and 180 degree negative

Description : An ideal power supply consist of   (A) Very small output resistance (B) Zero Internal resistance (C) Very large input resistance (D) Very large output resistance

Last Answer : An ideal power supply consist of Zero Internal resistance 

Description : When a sine wave has a frequency of 100 Hz in 12 s it goes through? A.1/100 cycle B.12 cycles C.120 cycles D.1,200 cycles

Last Answer : When a sine wave has a frequency of 100 Hz in 12 s it goes through? A.1/100 cycle B.12 cycles C.120 cycles D.1,200 cycles