Consider the following assumption made in the analysis of a jet impinging normally on a moving plate to introduce the principle of moment of momentum: 1. Friction between jet and plate is neglected. 2. Flow is steady 3. Impinging momentum of jet is uncharged. 4. Plate moves at a constant velocity. Which of these statements are relevant? (a) 1, 2 & 4 only (b) 1, 2 & 3 only (c) 2, 3 and 4 only (d) 1, 2, 3 & 4

Consider the following assumption made in the analysis of a jet impinging normally on a moving plate to introduce the principle of moment of momentum:
1. Friction between jet and plate is neglected.
2. Flow is steady
3. Impinging momentum of jet is uncharged.
4. Plate moves at a constant velocity.
Which of these statements are relevant?
(a) 1, 2 & 4 only (b) 1, 2 & 3 only (c) 2, 3 and 4 only (d) 1, 2, 3 & 4
by

1 Answer

Answer :

(a) 1, 2 & 4 only
by

Related questions

Electrons accelerated by a p.d. of `V=5000` volts are allowed to impinge normally on a plate. If the current constituted by the impinging electrons be

Description : Electrons accelerated by a p.d. of `V=5000` volts are allowed to impinge normally on a plate. If the current constituted by the impinging electrons be

Last Answer : Electrons accelerated by a p.d. of `V=5000` volts are allowed to impinge normally on a plate. If the current ... -31) kg` and `e=1.6xx10^(-19) C`

Consider the following statements in respect of steady laminar flow through a circular pipe: 1. Shear stress is zero on the central axis of the pipe 2. Discharge varies directly with the viscosity of the fluid 3. Velocity is maximum at the centre of the pipe. 4. Hydraulic gradient varies as the square of the mean velocity of flow. Which of these statements are correct? (a) 1, 2 , 3 & 4 (b) 1 & 3 only (c) 2 & 4 only (d)3 & 4 only

Description : Consider the following statements in respect of steady laminar flow through a circular pipe: 1. Shear stress is zero on the central axis of the pipe 2. Discharge varies directly with the viscosity of the fluid 3. Velocity is maximum at the ... 2 , 3 & 4 (b) 1 & 3 only (c) 2 & 4 only (d)3 & 4 only

Last Answer : (b) 1 & 3 only

The Euler's equation for the motion of liquids is based upon the assumption that (A) The fluid is non - viscous, homogeneous and incompressible (B) The velocity of flow is uniform over the section (C) The flow is continuous, steady and along the stream line (D) All of the above

Description : The Euler's equation for the motion of liquids is based upon the assumption that (A) The fluid is non - viscous, homogeneous and incompressible (B) The velocity of flow is uniform over the section (C) The flow is continuous, steady and along the stream line (D) All of the above

Last Answer : Answer: Option D

Consider the following statements: Mitra’s hyperbolic transition design is based on the principle that : 1. Flow depth in the canal, as well as the discharge, is constant 2. width of the canal varies along with the discharge 3. Rate of change of velocity per unit length of transition is constant throughout the length of the transition. Which of these statements are correct ? a) 1, 2 and 3 b) 1 and 2 only c) 2 and 3 only d) 1 and 3 only

Description : Consider the following statements: Mitra's hyperbolic transition design is based on the principle that : 1. Flow depth in the canal, as well as the discharge, is constant 2. width of the canal varies along with the discharge 3. Rate ... a) 1, 2 and 3 b) 1 and 2 only c) 2 and 3 only d) 1 and 3 only

Last Answer : d) 1 and 3 only

Consider the following statements : 1. There is no flow across a streamline 2. Streamline spacing varies directly with velocity at the section 3. Streamlines do not cross 4. In steady flow, streamline pattern does not change with time Which of these statements in respect of stream flow pattern are correct? (a) 1, 2, 3 and 4 (b) 1 and 2 only (c) 1, 3 and 4 only (d) 2, 3 and 4 only

Description : Consider the following statements : 1. There is no flow across a streamline 2. Streamline spacing varies directly with velocity at the section 3. Streamlines do not cross 4. In steady flow, streamline pattern does not change with ... 4 (b) 1 and 2 only (c) 1, 3 and 4 only (d) 2, 3 and 4 only

Last Answer : (c) 1, 3 and 4 only

According to Bernoulli's equation for steady ideal fluid flow (A) Principle of conservation of mass holds (B) Velocity and pressure are inversely proportional (C) Total energy is constant throughout (D) The energy is constant along a streamline but may vary across streamlines

Description : According to Bernoulli's equation for steady ideal fluid flow (A) Principle of conservation of mass holds (B) Velocity and pressure are inversely proportional (C) Total energy is constant throughout (D) The energy is constant along a streamline but may vary across streamlines

Last Answer : Answer: Option D

A jet of water of cross-sectional area 20 sq. cm impinges on a plate at an angle of 60? with a velocity of 10 m/sec. Neglecting the friction between the jet and plate (density of water 1000/9.81 kgm-1 sec2 per cubic meter), the force exerted by the jet on the plate would be in the range a.15 - 20 kg b.20 - 25 kg c.5 - 10 kg d.25 - 30 kg e.10 - 15 kg

Description : A jet of water of cross-sectional area 20 sq. cm impinges on a plate at an angle of 60? with a velocity of 10 m/sec. Neglecting the friction between the jet and plate (density of water 1000/9.81 kgm-1 sec2 per cubic meter), the ... a.15 - 20 kg b.20 - 25 kg c.5 - 10 kg d.25 - 30 kg e.10 - 15 kg

Last Answer : a. 15 - 20 kg

The assumption underlying an audit of financial statements is that they will be used by a. Different groups for different purposes. b. The general public in making investment decisions. c. The board of directors as basis of declaring cash dividends. d. The regulatory agencies to verify information that is relevant to their supervisory functions.

Description : The assumption underlying an audit of financial statements is that they will be used by a. Different groups for different purposes. b. The general public in making investment decisions. c ... dividends. d. The regulatory agencies to verify information that is relevant to their supervisory functions.

Last Answer : Different groups for different purposes.

Mass velocity in case of steady flow and through a constant cross￾section conduit is independent of the (A) Temperature (B) Pressure (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Mass velocity in case of steady flow and through a constant cross￾section conduit is independent of the (A) Temperature (B) Pressure (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Consider the following statements: The time of BOD assimilation in a stream can be affected by 1. Ratio of stream depth to flow width. 2. Stream BOD value 3. BOD rate constant. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements: The time of BOD assimilation in a stream can be affected by 1. Ratio of stream depth to flow width. 2. Stream BOD value 3. BOD rate constant. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (a) 1, 2 & 3

The Bernoulli's equation is based on the assumption that (A) There is no loss of energy of the liquid flowing (B) The velocity of flow is uniform across any cross-section of the pipe (C) No force except gravity acts on the fluid (D) All of the above

Description : The Bernoulli's equation is based on the assumption that (A) There is no loss of energy of the liquid flowing (B) The velocity of flow is uniform across any cross-section of the pipe (C) No force except gravity acts on the fluid (D) All of the above

Last Answer : Answer: Option D

If a gymnast sitting on a rotating stool, with his arms outstretched suddenly lowers his arm a.the angular velocity will remain constant b.the angular momentum will increase c.the angular velocity will decrease d.his moment of inertia will decrease e.107 dynes

Description : If a gymnast sitting on a rotating stool, with his arms outstretched suddenly lowers his arm a.the angular velocity will remain constant b.the angular momentum will increase c.the angular velocity will decrease d.his moment of inertia will decrease e.107 dynes

Last Answer : d. his moment of inertia will decrease

Consider the following statements: The total head against which a pump has to work must include, besides any other items, 1. the suction lift. 2. the delivery head. 3. the head lost due to friction at entrance in the rising main. 4. the head lost due to friction at exit in the rising main. Which of these statements are correct? (a) 1, 2 & 3 only (b) 2 & 3 only (c) 1, 2, 3 & 4 (d) 3 & 4 only

Description : Consider the following statements: The total head against which a pump has to work must include, besides any other items, 1. the suction lift. 2. the delivery head. 3. the head lost due to friction at entrance in the rising main. 4. the ... 2 & 3 only (b) 2 & 3 only (c) 1, 2, 3 & 4 (d) 3 & 4 only

Last Answer : (c) 1, 2, 3 & 4

Consider the following statements: For pure clay, the shear strength parameters will be 1. Cohesion c = 0; and angle of internal friction  will be maximum. 2. Cohesion c is maximum; and angle of internal friction  is also maximum. 3. Angle of internal friction  is zero, with some value of cohesion c. Which of these statements is/are correct? (a) 1, 2 & 3 (b) 1 only (c) 3 only (d) 2 only

Description : Consider the following statements: For pure clay, the shear strength parameters will be 1. Cohesion c = 0; and angle of internal friction  will be maximum. 2. Cohesion c is maximum; and angle of internal friction  is also maximum. ... is/are correct? (a) 1, 2 & 3 (b) 1 only (c) 3 only (d) 2 only

Last Answer : (c) 3 only

Consider the following statements: 1. Friction piles are also called floating piles 2. Minimum number of piles to qualify as a pile group is three. 3. The group efficiency of a pile group may be either less than 100% or more than 100%. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements: 1. Friction piles are also called floating piles 2. Minimum number of piles to qualify as a pile group is three. 3. The group efficiency of a pile group may be either less than 100% or more than 100%. ... ) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (a) 1, 2 & 3

Consider the following statements: 1. Standard penetration test is commonly used for cohesionless soils. 2. Standard penetration test results in respect of a cohesionless soil are correlated to its density index and friction angle. 3. Use of H-value not corrected for overburden pressure leads to highly conservative design of footings at shallow depths. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements: 1. Standard penetration test is commonly used for cohesionless soils. 2. Standard penetration test results in respect of a cohesionless soil are correlated to its density index and friction angle. 3. Use of H- ... 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (a) 1, 2 & 3

A jet engine works on the principle of a.Conservation of energy b.Conservation of mass and momentum c.Conservation of linear mementum d.Conservation of energy and momentum e.Conservation of mass

Description : A jet engine works on the principle of a.Conservation of energy b.Conservation of mass and momentum c.Conservation of linear mementum d.Conservation of energy and momentum e.Conservation of mass

Last Answer : c. Conservation of linear mementum

A jet engine works, on the principle of conservation of - (1) linear momentum (2) angular momentum (3) energy (4) mass

Description : A jet engine works, on the principle of conservation of - (1) linear momentum (2) angular momentum (3) energy (4) mass

Last Answer : (1) linear momentum Explanation: Linear momentum is a vector quantity defined as the product of an object's mass, m, and its velocity, v. Linear momentum is denoted by the letter p and is called ... for short: Note that a body's momentum is always in the same direction as its velocity vector.

When the momentum of one fluid is used for moving another fluid, such a device is called a/an (A) Jet pump (B) Blower (C) Acid egg (D) None of these

Description : When the momentum of one fluid is used for moving another fluid, such a device is called a/an (A) Jet pump (B) Blower (C) Acid egg (D) None of these

Last Answer : (A) Jet pump

Consider a car driving around a circular bend in the road. Which of the following CANNOT be constant? w) velocity of car x) speed of car y) nonrelativistic mass of car z) angular momentum of the car about the center of the circle

Description : Consider a car driving around a circular bend in the road. Which of the following CANNOT be constant? w) velocity of car x) speed of car y) nonrelativistic mass of car z) angular momentum of the car about the center of the circle  

Last Answer : ANSWER: W -- VELOCITY OF CAR

It is the unbalanced force developed in a turbo jet engine that is caused by the difference in the momentum of the low-velocity air entering the engine and the high velocity exhaust gases leaving the engine.  a. Fall  b. Lift  c. Drag  d. Thrust

Description : It is the unbalanced force developed in a turbo jet engine that is caused by the difference in the momentum of the low-velocity air entering the engine and the high velocity exhaust gases leaving the engine.  a. Fall  b. Lift  c. Drag  d. Thrust

Last Answer : Thrust

The principle of conservation of energy cannot be applied in case of a.Flow of heat through a metal b.Ideal flow of water in a pipe c.Simple pendulum d.Sliding of a particle along inclined plane with friction e.A particle moving in gravitational field

Description : The principle of conservation of energy cannot be applied in case of a.Flow of heat through a metal b.Ideal flow of water in a pipe c.Simple pendulum d.Sliding of a particle along inclined plane with friction e.A particle moving in gravitational field

Last Answer : e. A particle moving in gravitational field

Consider the following statements: 1. The benefit of surcharge and depth of foundation is only marginal in case of footings on purely cohesive soils. 2. The bearing capacity of a footing in pure clay increases with increase in size of the footing. 3. Size effects in plate load tests are more important in case of cohesionless soils. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements: 1. The benefit of surcharge and depth of foundation is only marginal in case of footings on purely cohesive soils. 2. The bearing capacity of a footing in pure clay increases with increase in size of the ... , 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (d) 1 & 3 only

Steady flow occurs, when the (A) Conditions change steadily with time (B) Conditions are the same at the adjacent points at any instant (C) Conditions do not change with time at any point (D) Rate of the velocity change is constant

Description : Steady flow occurs, when the (A) Conditions change steadily with time (B) Conditions are the same at the adjacent points at any instant (C) Conditions do not change with time at any point (D) Rate of the velocity change is constant

Last Answer : (C) Conditions do not change with time at any point

The fluid velocity varies as the cube of the cylindrical pipe diameter in case of steady state laminar flow at constant pressure drop for __________ fluid. (A) Newtonian (B) Pseudo-plastic (C) Dilatent (D) Bingham plastic

Description : The fluid velocity varies as the cube of the cylindrical pipe diameter in case of steady state laminar flow at constant pressure drop for __________ fluid. (A) Newtonian (B) Pseudo-plastic (C) Dilatent (D) Bingham plastic

Last Answer : (B) Pseudo-plastic

For steady ideal fluid flow, the Bernoulli's equation states that the (A) Velocity is constant along a stream line (B) Energy is constant throughout the fluid (C) Energy is constant along a stream line, but may vary across stream lines (D) None of these

Description : For steady ideal fluid flow, the Bernoulli's equation states that the (A) Velocity is constant along a stream line (B) Energy is constant throughout the fluid (C) Energy is constant along a stream line, but may vary across stream lines (D) None of these

Last Answer : (C) Energy is constant along a stream line, but may vary across stream lines

The fluid velocity varies as the square of the cylindrical pipe diameter, in case of steady state laminar flow at constant pressure drop, for __________ fluid. (A) Newtonian (B) Dilatant (C) Pseudo-plastic (D) Non-Newtonian

Description : The fluid velocity varies as the square of the cylindrical pipe diameter, in case of steady state laminar flow at constant pressure drop, for __________ fluid. (A) Newtonian (B) Dilatant (C) Pseudo-plastic (D) Non-Newtonian

Last Answer : (A) Newtonian

The fluid velocity varies as the square root of the cylindrical pipe diameter in case of steady state laminar flow at constant pressure drop of __________ fluid. (A) Dilatent (B) Pseudo-plastic (C) Bingham plastic (D) Newtonian

Description : The fluid velocity varies as the square root of the cylindrical pipe diameter in case of steady state laminar flow at constant pressure drop of __________ fluid. (A) Dilatent (B) Pseudo-plastic (C) Bingham plastic (D) Newtonian

Last Answer : (A) Dilatent

While calculating bending stress in the following welded joints which of the welds moment of inertia can be neglected? a) 1 b) None of the listed c) Both 1 & 3 d) Both 2 & 4

Description : While calculating bending stress in the following welded joints which of the welds moment of inertia can be neglected? a) 1 b) None of the listed c) Both 1 & 3 d) Both 2 & 4

Last Answer : b) None of the listed

A moving body on Earth ordinarily comes to rest by itself because of the (a) Law of inertia (b) Forces of friction (c) Conservation of momentum (d) Gravity

Description : A moving body on Earth ordinarily comes to rest by itself because of the (a) Law of inertia (b) Forces of friction (c) Conservation of momentum (d) Gravity

Last Answer : Ans:(b)

Which of the following statements is TRUE about an ELASTIC collision between two particles? Is it true that: w) neither particle loses any of its kinetic energy x) neither particle loses any of its momentum y) the velocity gained by one particle is equal to that lost by the other z) the total kinetic energy before and after the collision remains constant

Description : Which of the following statements is TRUE about an ELASTIC collision between two particles? Is it true that: w) neither particle loses any of its kinetic energy x) neither particle loses any of ... that lost by the other z) the total kinetic energy before and after the collision remains constant

Last Answer : ANSWER: Z -- THE TOTAL KINETIC ENERGY BEFORE AND AFTER THE COLLISION RE

A vector quantity whose direction is the same as the direction of the velocity  a. Force  b. Momentum  c. Friction  d. Resultant

Description : A vector quantity whose direction is the same as the direction of the velocity  a. Force  b. Momentum  c. Friction  d. Resultant

Last Answer : Momentum

Assertion When a charged particle moves perpendicular to a uniform magnetic field then its momentum remains constant. Reason Magnetic force acts perpe

Description : Assertion When a charged particle moves perpendicular to a uniform magnetic field then its momentum remains constant. Reason Magnetic force acts perpe

Last Answer : Assertion When a charged particle moves perpendicular to a uniform magnetic field then its momentum ... Assertion is false but Reason is true.

Which one of the following is not the law of dry friction? a.If friction is neglected, the reactions are always normal to the surfaces on contact b.Friction always acts to oppose the relative motion of the free body c.If static friction is acting, the value of the friction force may vary from zero to its maximum value d.The force of friction is always normal to the surface e.All of the above

Description : Which one of the following is not the law of dry friction? a.If friction is neglected, the reactions are always normal to the surfaces on contact b.Friction always acts to oppose the relative motion of ... its maximum value d.The force of friction is always normal to the surface e.All of the above

Last Answer : d. The force of friction is always normal to the surface

The flow in which the velocity vector is identical in magnitude and direction at every point, for any given instant, is known as (A) One dimensional flow (B) Uniform flow (C) Steady flow (D) Turbulent flow

Description : The flow in which the velocity vector is identical in magnitude and direction at every point, for any given instant, is known as (A) One dimensional flow (B) Uniform flow (C) Steady flow (D) Turbulent flow

Last Answer : Answer: Option B

The equation of continuity holds good when the flow (A) Is steady (B) Is one dimensional (C) Velocity is uniform at all the cross sections (D) All of the above

Description : The equation of continuity holds good when the flow (A) Is steady (B) Is one dimensional (C) Velocity is uniform at all the cross sections (D) All of the above

Last Answer : Answer: Option D

Steady flow occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same at successive periods of time (C) The magnitude and direction of the velocity do not change from point to point in the fluid (D) The fluid particles move in plane or parallel planes and the streamline patterns are identical in each plane

Description : Steady flow occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same at successive ... fluid particles move in plane or parallel planes and the streamline patterns are identical in each plane

Last Answer : Answer: Option B

What is the momentum of a 1.35 kg baseball moving at 3.75 ms away from home plate after a hit?

Description : What is the momentum of a 1.35 kg baseball moving at 3.75 ms away from home plate after a hit?

Last Answer : What is the answer ?

Sedimentation analysis is based on the assumption: (A) Soil particles are spherical (B) Particles settle independent of other particles (C) Walls of the jar do not affect the settlement (D) All the above

Description : Sedimentation analysis is based on the assumption: (A) Soil particles are spherical (B) Particles settle independent of other particles (C) Walls of the jar do not affect the settlement (D) All the above

Last Answer : (D) All the above

A particle moves along a rough plane inclined at 30? to the horizontal. The co-efficient of friction between the particle and the plane is 0.1. Its initial velocity is 15 m/sec. The ratio of the velocity of the particle when it move down the plane to that when it move up the plane would be in the regions a.8 ? 10 b.5 ? 7 c.2 ? 3 d.4 ? 6 e.10 ? 13

Description : A particle moves along a rough plane inclined at 30? to the horizontal. The co-efficient of friction between the particle and the plane is 0.1. Its initial velocity is 15 m/sec. The ratio of the velocity of the particle when it move ... be in the regions a.8 ? 10 b.5 ? 7 c.2 ? 3 d.4 ? 6 e.10 ? 13

Last Answer : b. 5 ? 7

A metal ball and a rubber ball, both having the same mass, strike a wall normally with the same velocity. The rubber ball rebounds and the metal ball does not rebound. It can be concluded that – (1) The rubber ball suffers greater change in momentum (2) The metal ball suffers greater change in momentum (3) Both suffer the same change in momentum (4) The initial momentum of the rubber ball is greater than that of the metal ball

Description : A metal ball and a rubber ball, both having the same mass, strike a wall normally with the same velocity. The rubber ball rebounds and the metal ball does not rebound. It can be concluded that - ... change in momentum (4) The initial momentum of the rubber ball is greater than that of the metal ball

Last Answer : (1) The rubber ball suffers greater change in momentum

A metal ball and a rubber ball, both having the same mass, strike a wall normally with the same velocity. The rubber ball rebounds and the metal ball does not rebound. It can be concluded that (1) The rubber ball suffers greater change in momentum (2) The metal ball suffers greater change in momentum (3) Both suffer the same change in momentum (4) The initial momentum of the rubber ball is greater than that of the metal ball

Description : A metal ball and a rubber ball, both having the same mass, strike a wall normally with the same velocity. The rubber ball rebounds and the metal ball does not rebound. It can be concluded that ( ... change in momentum (4) The initial momentum of the rubber ball is greater than that of the metal ball

Last Answer : The rubber ball suffers greater change in momentum 

Mass velocity is independent of temperature & pressure, when the flow is (A) Unsteady through unchanged cross-section (B) Steady through changing cross-section (C) Steady and the cross-section is unchanged (D) Unsteady and the cross-section is changed

Description : Mass velocity is independent of temperature & pressure, when the flow is (A) Unsteady through unchanged cross-section (B) Steady through changing cross-section (C) Steady and the cross-section is unchanged (D) Unsteady and the cross-section is changed

Last Answer : (C) Steady and the cross-section is unchanged

What is the mean of “Quasi-steady Assumption”?

Description : What is the mean of “Quasi-steady Assumption”?

Last Answer : “Quasi-” is an Italian word meaning ‘about’. In English usage it usually has the sense of ‘almost’ or ‘sort of’. So you are saying “almost steady assumption”. I have no idea what that might mean. AFIK steadiness is not a property of assumptions.

In Designing A Clutch Plate, What Assumption Is Made?

Description : In Designing A Clutch Plate, What Assumption Is Made?

Last Answer : Uniform wear condition is assumed because it leads to safer design.

Consider two pipes of same length and diameter through which water is passed at the same velocity. The friction factor for rough pipe is f1 and that for smooth pipe is f2 . Pick out the correct statement(A) f1 = f2 (B) f1 < f2 (C) f1 > f2 (D) Data not sufficient to relate f1 & f2

Description : Consider two pipes of same length and diameter through which water is passed at the same velocity. The friction factor for rough pipe is f1 and that for smooth pipe is f2 . Pick out the correct statement. (A) f1 = f2 (B) f1 < f2 (C) f1 > f2 (D) Data not sufficient to relate f1 & f2

Last Answer : (C) f1 > f2

A flow in which the quantity of liquid flowing per second is not constant, is called (A) Streamline flow (B) Turbulent flow (C) Steady flow (D) Unsteady flow

Description : A flow in which the quantity of liquid flowing per second is not constant, is called (A) Streamline flow (B) Turbulent flow (C) Steady flow (D) Unsteady flow

Last Answer : Answer: Option D

In the case of steady flow of a fluid, the acceleration of any fluid particle is (A) Constant (B) Variable (C) Zero (D) Zero under limiting conditions

Description : In the case of steady flow of a fluid, the acceleration of any fluid particle is (A) Constant (B) Variable (C) Zero (D) Zero under limiting conditions

Last Answer : Answer: Option C