When the momentum of one fluid is used for moving another fluid, such a device is called a/an (A) Jet pump (B) Blower (C) Acid egg (D) None of these

When the momentum of one fluid is used for moving another fluid,
such a device is called a/an
(A) Jet pump
(B) Blower
(C) Acid egg
(D) None of these
by

1 Answer

Answer :

(A) Jet pump
by

Related questions

When the head pumped against is less than the head of the fluid used for pumping, the usual device is a/an (A) Ejector (B) Blower (C) Injector (D) Airlift

Description : When the head pumped against is less than the head of the fluid used for pumping, the usual device is a/an (A) Ejector (B) Blower (C) Injector (D) Airlift

Last Answer : (D) Airlift

Consider the following assumption made in the analysis of a jet impinging normally on a moving plate to introduce the principle of moment of momentum: 1. Friction between jet and plate is neglected. 2. Flow is steady 3. Impinging momentum of jet is uncharged. 4. Plate moves at a constant velocity. Which of these statements are relevant? (a) 1, 2 & 4 only (b) 1, 2 & 3 only (c) 2, 3 and 4 only (d) 1, 2, 3 & 4

Description : Consider the following assumption made in the analysis of a jet impinging normally on a moving plate to introduce the principle of moment of momentum: 1. Friction between jet and plate is neglected. 2. Flow is steady 3. Impinging momentum of ... b) 1, 2 & 3 only (c) 2, 3 and 4 only (d) 1, 2, 3 & 4

Last Answer : (a) 1, 2 & 4 only

In case of a __________ the energy of flow is considerably decreased downstream of the machine. (A) Blower (B) Turbine (C) Centrifugal pump (D) Centrifugal fan

Description : In case of a __________ the energy of flow is considerably decreased downstream of the machine. (A) Blower (B) Turbine (C) Centrifugal pump (D) Centrifugal fan

Last Answer : (B) Turbine

Which of the following has the maximum compression ratio? (A) Blower (B) Compressor (C) Vacuum pump (D) Fan

Description : Which of the following has the maximum compression ratio? (A) Blower (B) Compressor (C) Vacuum pump (D) Fan

Last Answer : (C) Vacuum pump

The force exerted by a moving fluid on an immersed body is directly proportional to the rate of change of momentum due to the presence of the body. This statement is called (A) Newton's law of motion (B) Newton's law of cooling (C) Newton's law of viscosity (D) Newton's law of resistance

Description : The force exerted by a moving fluid on an immersed body is directly proportional to the rate of change of momentum due to the presence of the body. This statement is called (A) Newton's law of motion (B) Newton's law of cooling (C) Newton's law of viscosity (D) Newton's law of resistance

Last Answer : Answer: Option D

What is called as the heart of the Lamont boiler? a. Water drum b. Centrifugal pump c. Furnace d. Blower

Description : What is called as the heart of the Lamont boiler? a. Water drum b. Centrifugal pump c. Furnace d. Blower

Last Answer : b. Centrifugal pump

Coast Guard Regulations (46 CFR), require that an indicating light at the propulsion control station will operate if overloading or overheating occurs in a _______________. A. forced draft blower motor B. steering gear motor C. fuel pump motor D. condensate pump motor

Description : Coast Guard Regulations (46 CFR), require that an indicating light at the propulsion control station will operate if overloading or overheating occurs in a _______________. A. forced draft blower motor B. steering gear motor C. fuel pump motor D. condensate pump motor

Last Answer : Answer: B

An overload in which of the listed motors will result in the illumination of an indicating light at the propulsion control station alarm panel? A. Fuel pump motor B. Steering motor C. Condensate pump motor D. Forced draft blower motor

Description : An overload in which of the listed motors will result in the illumination of an indicating light at the propulsion control station alarm panel? A. Fuel pump motor B. Steering motor C. Condensate pump motor D. Forced draft blower motor

Last Answer : Answer: B

A jet engine works on the principle of a.Conservation of energy b.Conservation of mass and momentum c.Conservation of linear mementum d.Conservation of energy and momentum e.Conservation of mass

Description : A jet engine works on the principle of a.Conservation of energy b.Conservation of mass and momentum c.Conservation of linear mementum d.Conservation of energy and momentum e.Conservation of mass

Last Answer : c. Conservation of linear mementum

A jet engine works, on the principle of conservation of - (1) linear momentum (2) angular momentum (3) energy (4) mass

Description : A jet engine works, on the principle of conservation of - (1) linear momentum (2) angular momentum (3) energy (4) mass

Last Answer : (1) linear momentum Explanation: Linear momentum is a vector quantity defined as the product of an object's mass, m, and its velocity, v. Linear momentum is denoted by the letter p and is called ... for short: Note that a body's momentum is always in the same direction as its velocity vector.

It is the unbalanced force developed in a turbo jet engine that is caused by the difference in the momentum of the low-velocity air entering the engine and the high velocity exhaust gases leaving the engine.  a. Fall  b. Lift  c. Drag  d. Thrust

Description : It is the unbalanced force developed in a turbo jet engine that is caused by the difference in the momentum of the low-velocity air entering the engine and the high velocity exhaust gases leaving the engine.  a. Fall  b. Lift  c. Drag  d. Thrust

Last Answer : Thrust

Volute of a centrifugal pump should be designed in a fashion, such that the (A) Kinetic head gets converted into static head (B) Moving stream gradually reduces velocity (C) Mean velocity remains constant (D) None of these

Description : Volute of a centrifugal pump should be designed in a fashion, such that the (A) Kinetic head gets converted into static head (B) Moving stream gradually reduces velocity (C) Mean velocity remains constant (D) None of these

Last Answer : (A) Kinetic head gets converted into static head

In most of the vacuum crystalliser, vacuum is generally produced by means of a (A) Suction pump (B) Compressed air jet (C) Steam jet ejector with a barometric condenser (D) None of these

Description : In most of the vacuum crystalliser, vacuum is generally produced by means of a (A) Suction pump (B) Compressed air jet (C) Steam jet ejector with a barometric condenser (D) None of these

Last Answer : (C) Steam jet ejector with a barometric condenser

For the production of very high vacuum, a __________ pump is normally used. (A) Diffusion (B) Centrifugal (C) Jet ejector (D) Piston

Description : For the production of very high vacuum, a __________ pump is normally used. (A) Diffusion (B) Centrifugal (C) Jet ejector (D) Piston

Last Answer : (A) Diffusion

Hydraulic intensifier is used for increasing the (A) Rate of velocity of liquid supply (B) Rate of flow through delivery pipeline of a pump (C) Intensity of pressure of the liquid (D) Momentum rate through delivery pipe

Description : Hydraulic intensifier is used for increasing the (A) Rate of velocity of liquid supply (B) Rate of flow through delivery pipeline of a pump (C) Intensity of pressure of the liquid (D) Momentum rate through delivery pipe

Last Answer : (C) Intensity of pressure of the liquid

Which of the following size reduction equipments employs mainly attrition for ultrafine grinding? (A) Jet mills (B) Fluid energy mill (C) Micronizer (D) All (A), (B) and (C)

Description : Which of the following size reduction equipments employs mainly attrition for ultrafine grinding? (A) Jet mills (B) Fluid energy mill (C) Micronizer (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

What is the co-efficient of contraction, if a fluid jet discharging from a 50 mm diameter orifice has a 40 mm diameter at its vena-contracta? (A) 0.64 (B) 1.65 (C) 0.32 (D) 0.94

Description : What is the co-efficient of contraction, if a fluid jet discharging from a 50 mm diameter orifice has a 40 mm diameter at its vena-contracta? (A) 0.64 (B) 1.65 (C) 0.32 (D) 0.94

Last Answer : (A) 0.64

In jet refrigerators, the refrigerating fluid is practically always (A) Water (B) Ammonia (C) Freon (D) Brine

Description : In jet refrigerators, the refrigerating fluid is practically always (A) Water (B) Ammonia (C) Freon (D) Brine

Last Answer : (A) Water

The rate of change of moment of momentum represents the __________ by the fluid. (A) Torque applied (B) Force exerted (C) Work done (D) Power developed

Description : The rate of change of moment of momentum represents the __________ by the fluid. (A) Torque applied (B) Force exerted (C) Work done (D) Power developed

Last Answer : (A) Torque applied

Euler's equation of motion states, that at every point, the (A) Fluid momentum is constant (B) Force per unit mass equals acceleration (C) Rate of mass outflow is equal to the rate of mass inflow (D) None of these

Description : Euler's equation of motion states, that at every point, the (A) Fluid momentum is constant (B) Force per unit mass equals acceleration (C) Rate of mass outflow is equal to the rate of mass inflow (D) None of these

Last Answer : (B) Force per unit mass equals acceleration

Pick out the wrong statement. (A) Momentum transfer in laminar flow results from velocity gradient (B) A fluid in equilibrium is not free from shear stress (C) The viscosity of a non-Newtonian fluid is a function of temperature only (D) Both (B) and (C)

Description : Pick out the wrong statement. (A) Momentum transfer in laminar flow results from velocity gradient (B) A fluid in equilibrium is not free from shear stress (C) The viscosity of a non-Newtonian fluid is a function of temperature only (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Momentum correction factor used in fluid flow problems accounts for the (A) Change in direction of flow (B) Change in total energy (C) Change in pressure (D) Non uniform direction of velocities at inlet & outlet sections

Description : Momentum correction factor used in fluid flow problems accounts for the (A) Change in direction of flow (B) Change in total energy (C) Change in pressure (D) Non uniform direction of velocities at inlet & outlet sections

Last Answer : (D) Non uniform direction of velocities at inlet & outlet sections

In turbulent flow, the (A) Fluid particles move in an orderly manner (B) Momentum transfer is on molecular scale only (C) Shear stress is caused more effectively by cohesion than momentum transfer (D) Shear stresses are generally larger than in a similar laminar flow

Description : In turbulent flow, the (A) Fluid particles move in an orderly manner (B) Momentum transfer is on molecular scale only (C) Shear stress is caused more effectively by cohesion than momentum transfer (D) Shear stresses are generally larger than in a similar laminar flow

Last Answer : (D) Shear stresses are generally larger than in a similar laminar flow

The continuity equation of fluid mechanics utilises the principle of conservation of (A) Momentum (B) Mass (C) Energy (D) Both (B) & (C)

Description : The continuity equation of fluid mechanics utilises the principle of conservation of (A) Momentum (B) Mass (C) Energy (D) Both (B) & (C)

Last Answer : (B) Mass

Fluid resistance to shear depends upon its (A) Rate of transfer of molecular momentum (B) Cohesion (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Fluid resistance to shear depends upon its (A) Rate of transfer of molecular momentum (B) Cohesion (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Atomization of spray fluid can achieved by : A. discharging the liquid through an orifice under pressure B. by breaking up the jet of liquid by a blast of _____ C. both A & B D. none

Description : Atomization of spray fluid can achieved by : A. discharging the liquid through an orifice under pressure B. by breaking up the jet of liquid by a blast of _____ C. both A & B D. none

Last Answer : C. both A & B

Water jet coming out of a stationary horizontal tube at speed v strikes horizontally a massive wall moving in opposite with same speed. Water come to

Description : Water jet coming out of a stationary horizontal tube at speed v strikes horizontally a massive wall moving in opposite with same speed. Water come to

Last Answer : Water jet coming out of a stationary horizontal tube at speed v strikes horizontally a massive wall ... energy of water jet striking the wall is zero

A convection process in which an external device, such as a fan, is used to produce the fluid flow.  a. Forced Convection  b. External Convection  c. Placid Convection  d. Thermionic Convection

Description : A convection process in which an external device, such as a fan, is used to produce the fluid flow.  a. Forced Convection  b. External Convection  c. Placid Convection  d. Thermionic Convection

Last Answer : Forced Convection

What type of motion the fluid element undergoes, when it changes from one position to another position, such that the angle between the two sides changes? (A) Rotation (B) Translation (C) Linear deformation (D) Angular deformation

Description : What type of motion the fluid element undergoes, when it changes from one position to another position, such that the angle between the two sides changes? (A) Rotation (B) Translation (C) Linear deformation (D) Angular deformation

Last Answer : (D) Angular deformation

While starting a centrifugal pump, its delivery valve should be kept (A) Opened (B) Closed (C) Either opened or closed; it does not make any difference (D) Either opened or closed; depending on the fluid viscosity

Description : While starting a centrifugal pump, its delivery valve should be kept (A) Opened (B) Closed (C) Either opened or closed; it does not make any difference (D) Either opened or closed; depending on the fluid viscosity

Last Answer : (B) Closed

Priming of a centrifugal pump is done to (A) Increase the mass flow rate of fluid (B) Develop effective pressure rise by the pump (C) Avoid chances of separation inside the impeller (D) None of these

Description : Priming of a centrifugal pump is done to (A) Increase the mass flow rate of fluid (B) Develop effective pressure rise by the pump (C) Avoid chances of separation inside the impeller (D) None of these

Last Answer : (C) Avoid chances of separation inside the impeller

Theoretical head developed by a centrifugal pump does not depend upon the __________ the impeller. (A) Radius of (B) Speed of (C) Fluid velocity leaving (D) None of these

Description : Theoretical head developed by a centrifugal pump does not depend upon the __________ the impeller. (A) Radius of (B) Speed of (C) Fluid velocity leaving (D) None of these

Last Answer : (D) None of these

Check valve provided in the discharge line of a centrifugal pump serves the purpose of controlling the (A) Back flow of fluid in the event of stoppage of pump (B) Discharge pressure (C) Flow of liquid during operation of the pump (D) All (A), (B) and (C)

Description : Check valve provided in the discharge line of a centrifugal pump serves the purpose of controlling the (A) Back flow of fluid in the event of stoppage of pump (B) Discharge pressure (C) Flow of liquid during operation of the pump (D) All (A), (B) and (C)

Last Answer : (A) Back flow of fluid in the event of stoppage of pump

In case of a centrifugal pump, the theoretical head developed is dependent on the __________ the impeller. (A) Speed of (B) Diameter of (C) Fluid velocity leaving (D) All (A), (B) and (C)

Description : In case of a centrifugal pump, the theoretical head developed is dependent on the __________ the impeller. (A) Speed of (B) Diameter of (C) Fluid velocity leaving (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Hydraulic __________ works on the principle of Pascal's law of transmission of fluid pressure. (A) Press (B) Turbine (C) Pump (D) Coupling

Description : Hydraulic __________ works on the principle of Pascal's law of transmission of fluid pressure. (A) Press (B) Turbine (C) Pump (D) Coupling

Last Answer : (A) Press

To handle smaller quantity of fluid at higher discharge pressure, use a __________ pump. (A) Reciprocating (B) Centrifugal (C) Volute (D) Rotary vacuum

Description : To handle smaller quantity of fluid at higher discharge pressure, use a __________ pump. (A) Reciprocating (B) Centrifugal (C) Volute (D) Rotary vacuum

Last Answer : (A) Reciprocating

In case of unsteady fluid flow, conditions & flow pattern change with the passage of time at a position in a flow situation. Which of the following is an example of unsteady flow? (A) Discharge of water by a centrifugal pump being run at a constant rpm (B) Water flow in the suction and discharge pipe of a reciprocating pump (C) Water discharge from a vertical vessel in which constant level is maintained (D) Low velocity flow of a highly viscous liquid through a hydraulically smooth pipe

Description : In case of unsteady fluid flow, conditions & flow pattern change with the passage of time at a position in a flow situation. Which of the following is an example of unsteady flow? (A) ... level is maintained (D) Low velocity flow of a highly viscous liquid through a hydraulically smooth pipe

Last Answer : (B) Water flow in the suction and discharge pipe of a reciprocating pump

In case of a, centrifugal pump, the ratio h1/h2is termed as the __________ efficiency (where, h1 = actual measured head & h2 = head imparted to the fluid by impeller). (A) Mechanical (B) Overall (C) Volumetric (D) Impeller

Description : In case of a, centrifugal pump, the ratio h1/h2is termed as the __________ efficiency (where, h1 = actual measured head & h2 = head imparted to the fluid by impeller). (A) Mechanical (B) Overall (C) Volumetric (D) Impeller

Last Answer : A) Mechanical

Would you gain momentum falling towards a large asteroid if the large asteroid was moving away?

Description : Would you gain momentum falling towards a large asteroid if the large asteroid was moving away?

Last Answer : answer:Were the boosters already active before you jumped out, or did the asteroid only start moving when you jumped? Does this atmosphere have an atmosphere that would push you downwards? If ... fall anyway, until you reach terminal velocity; I assume the question is whether you accelerate faster.

The periodic time of a body moving in Simple Harmonic Motion is a.Directly proportional to its angular velocity b.Directly proportional to the weight of the body c.Inversely proportional to the square of angular velocity d.Directly proportional to the momentum of swinging body e.Inversely proportional to the angular velocity

Description : The periodic time of a body moving in Simple Harmonic Motion is a.Directly proportional to its angular velocity b.Directly proportional to the weight of the body c.Inversely proportional to ... d.Directly proportional to the momentum of swinging body e.Inversely proportional to the angular velocity

Last Answer : e. Inversely proportional to the angular velocity

Two objects A and B are moving with same momentum. Mass of object 'B' is greater then mass of object 'A'. Which of the two object will have higher kinetic energy? -Physics

Description : Two objects A and B are moving with same momentum. Mass of object 'B' is greater then mass of object 'A'. Which of the two object will have higher kinetic energy? -Physics

Last Answer : Let m1​ and m2​ be the masses of the body Let m1​>m2​Given that m1​v1​=m2​v2​v2​v1​​=m1​m2​​∴ Ratio between their kinetic energies , =K2​K1​​=21​m2​v22​21​m1​v12​​⟹K2​K1​​=m2​m1​​×m12​

A body is moving with velocity 4 m/s , possesses 56 Joules of Kinetic Energy. The momentum of body will be equal to -Physics

Description : A body is moving with velocity 4 m/s , possesses 56 Joules of Kinetic Energy. The momentum of body will be equal to -Physics

Last Answer : (d) 28 kgms-1

If a compact car and an SUV were both moving at 50 mphwhich would have the greater momentum?

Description : If a compact car and an SUV were both moving at 50 mphwhich would have the greater momentum?

Last Answer : Whichever has the greater mass.

In an isolated system two cars each with a mass of 1000 kg collide car 1 is initially at rest while car 2was moving at10ms what is the magnitude of their combined momentum after the collision?

Description : In an isolated system two cars each with a mass of 1000 kg collide car 1 is initially at rest while car 2was moving at10ms what is the magnitude of their combined momentum after the collision?

Last Answer : What is the answer ?

What is the momentum of 4 kg ball that is moving at the velocity of 2 ms?

Description : What is the momentum of 4 kg ball that is moving at the velocity of 2 ms?

Last Answer : (4 kg)*(2 m/s) = 8 kg•m/s

What is the momentum of a 1.35 kg baseball moving at 3.75 ms away from home plate after a hit?

Description : What is the momentum of a 1.35 kg baseball moving at 3.75 ms away from home plate after a hit?

Last Answer : What is the answer ?

In an isolated system two cars each with a mass of 1500 kg collide car 1 is initially at rest while car 2 was moving at 5ms. What is their combined momentum after collision?

Description : In an isolated system two cars each with a mass of 1500 kg collide car 1 is initially at rest while car 2 was moving at 5ms. What is their combined momentum after collision?

Last Answer : Need answer

A particle of mass m is moving along a straight path through the origin of coordinates with a velocity v. The angular momentum of the particle about the origin (a) mv (b) Depends on its distance from origin (c) Is zero (d) Changes from positive to negative as it passes through the origin

Description : A particle of mass m is moving along a straight path through the origin of coordinates with a velocity v. The angular momentum of the particle about the origin (a) mv (b) Depends on its distance from origin (c) Is zero (d) Changes from positive to negative as it passes through the origin

Last Answer : Ans:(c)