The Muskingum method of flood routing is a (a) Form of hydraulic routing of a flood (b) Form of reservoir routing (c) Complete numerical solution of St. Venant equations (d) Hydrological channel routing method

The Muskingum method of flood routing is a
(a) Form of hydraulic routing of a flood
(b) Form of reservoir routing
(c) Complete numerical solution of St. Venant equations
(d) Hydrological channel routing method
by

1 Answer

Answer :

(d) Hydrological channel routing method
by

Related questions

Shear strain energy theory for the failure of a material at elastic limit, is due to (A) Rankine (B) Guest or Trecas (C) St. Venant (D) Von Mises

Description : Shear strain energy theory for the failure of a material at elastic limit, is due to  (A) Rankine  (B) Guest or Trecas  (C) St. Venant  (D) Von Mises

Last Answer : (D) Von Mises

The type and degree of flooding is influenced by many factors, such as (a) Climatological (b) Hydrological and environmental conditions (c) Local geomorphology of the flood plain (d) All of the above

Description : The type and degree of flooding is influenced by many factors, such as (a) Climatological (b) Hydrological and environmental conditions (c) Local geomorphology of the flood plain (d) All of the above

Last Answer : (d) All of the above

Finite element analysis deals with . a.approximate numerical solution b.non-boundary value problems c.Laplace equations d.All of the above

Description : Finite element analysis deals with . a.approximate numerical solution b.non-boundary value problems c.Laplace equations d.All of the above

Last Answer : a.approximate numerical solution

What causes black fluid in reservoir for hydraulic clutch on 99 Honda crv?

Description : What causes black fluid in reservoir for hydraulic clutch on 99 Honda crv?

Last Answer : Contaminated fluid. Should be flushed more often.

The primary purpose of a hydraulic reservoir

Description : The primary purpose of a hydraulic reservoir

Last Answer : A. to compensate for leaks, displacement and expansion

What is function of Oil reservoir,Pressure relief valve, Direction control valve and filters in Hydraulic system.

Description : What is function of Oil reservoir,Pressure relief valve,  Direction control valve and filters in Hydraulic system.

Last Answer : (i) Oil Reservoir - To store the Hydraulic oil for the circuit (ii) Pressure Relief Valve- To release the extra pressure whenever not required by system (iii) Direction Control Valve- To ... (iv) Filters- To filter the foreign particle from the oil and to separates submicron level contamination

Main purpose of mean water training for rivers is (A) Flood control (B) To provide sufficient depth of water in navigable channels, during low water periods (C) To preserve the channel in good shape by efficient disposal of suspended and bed load (D) All of the above

Description : Main purpose of mean water training for rivers is (A) Flood control (B) To provide sufficient depth of water in navigable channels, during low water periods (C) To preserve the channel in good shape by efficient disposal of suspended and bed load (D) All of the above

Last Answer : Answer: Option C

Which of the following is used to estimate which areas will be inundated during a flood, based on river height information? (a) satellite and radar images (b) flood maps / floodplain hydraulic models (c) river gauging stations (d) all of the above.

Description : Which of the following is used to estimate which areas will be inundated during a flood, based on river height information? (a) satellite and radar images (b) flood maps / floodplain hydraulic models (c) river gauging stations (d) all of the above.

Last Answer : (b) flood maps / floodplain hydraulic models

Find a complete solution of each of the following equations: b.) y" + 2y'+ 10y = e-* sec x?

Description : Find a complete solution of each of the following equations: b.) y" + 2y'+ 10y = e-* sec x?

Last Answer : text[Limit - i + 1]:=tdigit[digit[i]]; % Reversing the order. next i; % Arabic numerals put the low order last. Print text," = ",n,"!" ... of arithmetic, here ten. There are many considerations. The scratchpad variable d must be able to hold the result of a single-digit

Water gets evaporated from water surfaces and land surfaces, get converted into water drops at lower temperatures, flows over ground surface and finally meets its source, i.e. lake, sea, etc. This entire process is generally known as (A) Hydrological cycle (B) Water cycle (C) Evaporation and precipitation cycle (D) All the above

Description : Water gets evaporated from water surfaces and land surfaces, get converted into water drops at lower temperatures, flows over ground surface and finally meets its source, i.e. lake, sea, etc. This ... Hydrological cycle (B) Water cycle (C) Evaporation and precipitation cycle (D) All the above

Last Answer : (D) All the above

First operation during the detailed survey of a hill road, is (A) Hydrological and soil surveys (B) Adjustment of alignment along with curves (C) Derivation of longitudinal and cross-sections (D) Fixation of Bench Marks

Description : First operation during the detailed survey of a hill road, is (A) Hydrological and soil surveys (B) Adjustment of alignment along with curves (C) Derivation of longitudinal and cross-sections (D) Fixation of Bench Marks

Last Answer : Answer: Option D

Which of the following are pertinent to the realization of hydrological cycle? 1. Latitudinal difference in solar heating of the Earth’s surface 2. Inclination of the Earth’s axis 3. Uneven distribution of land and water 4. Coriolis effect (a) 1, 2 & 3 only (b) 1, 2 & 4 only (c) 2, 3 & 4 only (d) 1, 2, 3 & 4

Description : Which of the following are pertinent to the realization of hydrological cycle? 1. Latitudinal difference in solar heating of the Earth's surface 2. Inclination of the Earth's axis 3. Uneven distribution of land and water 4. Coriolis effect (a) ... (b) 1, 2 & 4 only (c) 2, 3 & 4 only (d) 1, 2, 3 & 4

Last Answer : (b) 1, 2 & 4 only

According to Chezy's formula, the discharge through an open channel is (where A = Area of flow, C = Chezy's constant, m = Hydraulic mean depth, and i = Uniform slope in bed) (A) A × m × i) (B) C × m × i) (C) AC × m × i) (D) mi × A × C)

Description : According to Chezy's formula, the discharge through an open channel is (where A = Area of flow, C = Chezy's constant, m = Hydraulic mean depth, and i = Uniform slope in bed) (A) A × m × i) (B) C × m × i) (C) AC × m × i) (D) mi × A × C)

Last Answer : Answer: Option C

According to Chezy's formula, the discharge through an open channel is (where A = Area of flow, C = Chezy's constant, m = Hydraulic mean depth, and i = Uniform slope in bed) (A) A × m × i) (B) C × m × i) (C) AC × m × i) (D) mi × A × C)

Description : According to Chezy's formula, the discharge through an open channel is (where A = Area of flow, C = Chezy's constant, m = Hydraulic mean depth, and i = Uniform slope in bed) (A) A × m × i) (B) C × m × i) (C) AC × m × i) (D) mi × A × C)

Last Answer : Answer: Option C

The critical depth meter is used to measure (A) Velocity of flow in an open channel (B) Depth of flow in an open channel (C) Hydraulic jump (D) Depth of channel

Description : The critical depth meter is used to measure (A) Velocity of flow in an open channel (B) Depth of flow in an open channel (C) Hydraulic jump (D) Depth of channel

Last Answer : Answer: Option C

The most economical section of a trapezoidal channel is one which has hydraulic mean depth equal to (A) 1/2 × depth (B) 1/2 × breadth (C) 1/2 × sloping side (D) 1/4 × (depth + breadth)

Description : The most economical section of a trapezoidal channel is one which has hydraulic mean depth equal to (A) 1/2 × depth (B) 1/2 × breadth (C) 1/2 × sloping side (D) 1/4 × (depth + breadth)

Last Answer : Answer: Option A

The most economical section of a rectangular channel is one which has hydraulic mean depth or hydraulic radius equal to (A) Half the depth (B) Half the breadth (C) Twice the depth (D) Twice the breadth

Description : The most economical section of a rectangular channel is one which has hydraulic mean depth or hydraulic radius equal to (A) Half the depth (B) Half the breadth (C) Twice the depth (D) Twice the breadth

Last Answer : Answer: Option A

If Nf , Nd and H are total number flow channels, total number of potential drops and total hydraulic head differences respectively, the discharge q through the complete flow is given by (where K is a constant) (A) q = (Nf/Nd) (B) q = KH (Nd/(Nf ) (C) q = KH (Nf/Nd) (D) q = KH Nf/Nd)

Description : If Nf , Nd and H are total number flow channels, total number of potential drops and total hydraulic head differences respectively, the discharge q through the complete flow is given by (where K is a constant) (A) q = (Nf/Nd) (B) q = KH (Nd/(Nf ) (C) q = KH (Nf/Nd) (D) q = KH Nf/Nd)

Last Answer : Answer: Option C

method requires the following data pertaining annual flood series (i) Mean value (ii) Standard deviation (iii) Length of record (iv) Coefficient of skew The correct answer is (A) (i) and (ii) (B) (i),(i) and (iii) (C) (i), (ii) and (iv) (D) (i), (ii), (iii) and (iv)

Description : method requires the following data pertaining annual flood series (i) Mean value (ii) Standard deviation (iii) Length of record (iv) Coefficient of skew The correct answer is (A) (i) and (ii) (B) (i),(i) and (iii) (C) (i), (ii) and (iv) (D) (i), (ii), (iii) and (iv)

Last Answer : Answer: Option B

Which of the following methods is used to estimate flood discharge based on high water marks left over in the past? (A) Slope-area method (B) Area-velocity method (C) Moving boat method (D) Ultrasonic method

Description : Which of the following methods is used to estimate flood discharge based on high water marks left over in the past? (A) Slope-area method (B) Area-velocity method (C) Moving boat method (D) Ultrasonic method

Last Answer : Answer: Option A

In _______forwarding, the routing tableholds the address of just thenext hop instead of complete routeinformation. A) next-hopB)network-specificC)host-specificD)default

Description : In _______forwarding, the routing tableholds the address of just thenext hop instead of complete routeinformation. A) next-hop B) network-specific C) host-specific D) default

Last Answer : next-hop

A broad, low embankment built up along the banks of a river channel during floods is called (1) Delta (2) Levee (3) Flood Plain (4) Dune

Description : A broad, low embankment built up along the banks of a river channel during floods is called (1) Delta (2) Levee (3) Flood Plain (4) Dune

Last Answer : (2) Levee Explanation: A levee, dike, dyke or flood bank is a broad, low embankment built up along the banks of a river channel during floods. Levees are usually parallel to the way the ... so levees can help direct the flow of the river. Levees can also be artificially created or reinforced.

A broad, low embankment built up along the banks of a river channel during floods is called (1) Delta (2) Levee (3) Flood Plain (4) Dune

Description : A broad, low embankment built up along the banks of a river channel during floods is called (1) Delta (2) Levee (3) Flood Plain (4) Dune

Last Answer : Levee

What do you understand by hydrological cycle? -Geography

Description : What do you understand by hydrological cycle? -Geography

Last Answer : The fresh water obtained from the surface runoff and groundwater is continually renewed through the hydrological cycle for usage. Hydrological cycle ensures that water is a renewable source.

What is hydrological cycle? What is its importance ? -SST 10th

Description : What is hydrological cycle? What is its importance ? -SST 10th

Last Answer : The continuous movement of water on, above and below the surface of earth is known as hydrological cycle. The freshwater is mainly obtained from surface run off and ground water that is ... being renewed and recharged through the hydrological cycle. All water moves within the hydrological cycle .

Give a brief description of ‘Hydrological Cycle’? -SST 10th

Description : Give a brief description of ‘Hydrological Cycle’? -SST 10th

Last Answer : . Three-fourth of the earth's surface is covered with water, but only a small proportion of it accounts for freshwater that can be put to use. . The process of hydrological cycle began ... rivers, ponds and lakes. This water again gets drained into sea or ocean and forms a hydrological process.

Hydrological cycle is controlled by

Description : Hydrological cycle is controlled by

Last Answer : Hydrological cycle is controlled by A. Grasslands B. Forests C. Planktons D. Epiphytes

What are the basic hydrological requirements for river basin development?

Description : What are the basic hydrological requirements for river basin development?

Last Answer : Need answer

Earthquake is a: a) Geophysical disaster b) Hydrological disaster c) Meterological disaster d) Compound disaster

Description : Earthquake is a: a) Geophysical disaster b) Hydrological disaster c) Meterological disaster d) Compound disaster

Last Answer : a) Geophysical disaster

Earthquake is a: a) Geophysical disaster (b) Hydrological disaster (c) Meteorological disaster (d) Compound disaster

Description : Earthquake is a: a) Geophysical disaster (b) Hydrological disaster (c) Meteorological disaster (d) Compound disaster

Last Answer : a) Geophysical disaster

Tropical cyclone, drought, wildfire is: (a) Industrial hazard (b) Man induced hazard (c) Meteorological hazard (d) Hydrological hazard

Description : Tropical cyclone, drought, wildfire is: (a) Industrial hazard (b) Man induced hazard (c) Meteorological hazard (d) Hydrological hazard

Last Answer : (c) Meteorological hazard

Hydrological drought:

Description : Hydrological drought:

Last Answer : It occurs when the total amount of rainfall is less than the average rainfall. It is generally associated with reduction of (below the average) statistical average of water reserves available in source such as aquifers, lakes and reservoirs

Which type of natural hazards cause maximum damage to property and lives? (A) Hydrological (B) Hydro-meteorological (C) Geological (D) Geo-chemical

Description : Which type of natural hazards cause maximum damage to property and lives? (A) Hydrological (B) Hydro-meteorological (C) Geological (D) Geo-chemical 

Last Answer : (A) Hydrological

In open channel flow in a rectangular channel, the ratio between the critical depth and the initial depth, when a hydraulic jump occurs is (A) 0.5 (B) 0.84 (C) 1.84 (D) 1.25

Description : In open channel flow in a rectangular channel, the ratio between the critical depth and the initial depth, when a hydraulic jump occurs is (A) 0.5 (B) 0.84 (C) 1.84 (D) 1.25

Last Answer : (C) 1.84

The ratio of the hydraulic radius to the diameter of the channel, for maximum mean velocity of flow in a circular channel, in open channel flow is (A) 0.3 (B) 0.9 (C) 0.03 (D) 0.66

Description : The ratio of the hydraulic radius to the diameter of the channel, for maximum mean velocity of flow in a circular channel, in open channel flow is (A) 0.3 (B) 0.9 (C) 0.03 (D) 0.66

Last Answer : (A) 0.3

If 'x' is the depth of flow in an open channel of large width, then the hydraulic radius is equal to (A) x (B) x/2 (C) x/3 (D) 2x/3

Description : If 'x' is the depth of flow in an open channel of large width, then the hydraulic radius is equal to (A) x (B) x/2 (C) x/3 (D) 2x/3

Last Answer : (A) x

The ratio of the depth of flow to the hydraulic radius for the most economical trapezoidal section, in open channel flow is (A) 0.5 (B) 1 (C) 1.5 (D) 2

Description : The ratio of the depth of flow to the hydraulic radius for the most economical trapezoidal section, in open channel flow is (A) 0.5 (B) 1 (C) 1.5 (D) 2

Last Answer : (D) 2

Hydraulic mean depth (Dm) for a circular pipe of diameter 'D' flowing full is 0.25 D. For a circular channel, at Dm = 0.3 D, gives the condition for the maximum (A) Flow rate (B) Mean velocity (C) Both 'a' & 'b' (D) Neither 'a' nor 'b

Description : Hydraulic mean depth (Dm) for a circular pipe of diameter 'D' flowing full is 0.25 D. For a circular channel, at Dm = 0.3 D, gives the condition for the maximum (A) Flow rate (B) Mean velocity (C) Both 'a' & 'b' (D) Neither 'a' nor 'b

Last Answer : (B) Mean velocity

The losses in open channel flow generally vary as the (A) Inverse of the roughness (B) First power of the roughness (C) Square of the velocity (D) Inverse square of hydraulic radius

Description : The losses in open channel flow generally vary as the (A) Inverse of the roughness (B) First power of the roughness (C) Square of the velocity (D) Inverse square of hydraulic radius

Last Answer : (B) First power of the roughness

Define hydraulic radius for trapezoidal channel.

Description : Define hydraulic radius for trapezoidal channel.

Last Answer : Hydraulic Radius: It is the ratio of the wetted area to wetted perimeter. It is also called as Hydraulic mean depth. R= Wetted area / Wetted perimeter = A/P

Numerical control a.applies only to milling machines b.is a method for producing exact number of parts per hour c.is a method for controlling by means of set of instructions d.None of the mentioned

Description : Numerical control a.applies only to milling machines b.is a method for producing exact number of parts per hour c.is a method for controlling by means of set of instructions d.None of the mentioned

Last Answer : c.is a method for controlling by means of set of instructions

Robot that perform the successive stages of a task according to predetermined, unchanging method is called as A : Fixed Sequence Robot B : Variable sequence robot C : Playback Robot D : Numerical Control robot

Description : Robot that perform the successive stages of a task according to predetermined, unchanging method is called as A : Fixed Sequence Robot B : Variable sequence robot C : Playback Robot D : Numerical Control robot

Last Answer : A : Fixed Sequence Robot

Robot that perform the successive stages of a task according to predetermined, unchanging method is called as A : Fixed Sequence Robot B : Variable sequence robot C : Playback Robot D : Numerical Control robot

Description : Robot that perform the successive stages of a task according to predetermined, unchanging method is called as A : Fixed Sequence Robot B : Variable sequence robot C : Playback Robot D : Numerical Control robot

Last Answer : A : Fixed Sequence Robot

Robot that perform the successive stages of a task according to predetermined, unchanging method is called as A : Fixed Sequence Robot B : Variable sequence robot C : Playback Robot D : Numerical Control robot

Description : Robot that perform the successive stages of a task according to predetermined, unchanging method is called as A : Fixed Sequence Robot B : Variable sequence robot C : Playback Robot D : Numerical Control robot

Last Answer : A : Fixed Sequence Robot

Robot that perform the successive stages of a task according to predetermined, unchanging method is called as A : Fixed Sequence Robot B : Variable sequence robot C : Playback Robot D : Numerical Control robot

Description : Robot that perform the successive stages of a task according to predetermined, unchanging method is called as A : Fixed Sequence Robot B : Variable sequence robot C : Playback Robot D : Numerical Control robot

Last Answer : A : Fixed Sequence Robot

Robot that perform the successive stages of a task according to predetermined, unchanging method is called as A : Fixed Sequence Robot B : Variable sequence robot C : Playback Robot D : Numerical Control robot

Description : Robot that perform the successive stages of a task according to predetermined, unchanging method is called as A : Fixed Sequence Robot B : Variable sequence robot C : Playback Robot D : Numerical Control robot

Last Answer : A : Fixed Sequence Robot

Qualitative research is often exploratory and has all of the following characteristics except: a. It is typically used when a great deal is already known about the topic of interest b. It relies on the collection of non-numerical data such as words and pictures c. It is used to generate hypotheses and develop theory about phenomena in the world d. It uses the inductive scientific method

Description : Qualitative research is often exploratory and has all of the following characteristics except: a. It is typically used when a great deal is already known about the topic of interest b. It ... hypotheses and develop theory about phenomena in the world d. It uses the inductive scientific method

Last Answer : a. It is typically used when a great deal is already known about the topic of interest

All of the following are common characteristics of experimental research except: a. It relies primarily on the collection of numerical data b. It can produce important knowledge about cause and effect c. It uses the deductive scientific method d. It rarely is conducted in a controlled setting or environment

Description : All of the following are common characteristics of experimental research except: a. It relies primarily on the collection of numerical data b. It can produce important knowledge about cause and ... uses the deductive scientific method d. It rarely is conducted in a controlled setting or environment

Last Answer : d. It rarely is conducted in a controlled setting or environment

(a) Write the essential condition for the following reaction to take place: 2AgBr—-> 2Ag + Br2 Write one application of this reaction. (b) Complete the following chemical equation of a chemical reaction 2FeS04 — chemical-reactions-and-equations-chapter-wise-important-questions-class-10-science-5 (c) What happens when water is added to quick line. Write chemical equation. -Chemistry

Description : (a) Write the essential condition for the following reaction to take place: 2AgBr--> 2Ag + Br2 Write one application of this reaction. (b) Complete the following chemical equation of a chemical ... science-5 (c) What happens when water is added to quick line. Write chemical equation. -Chemistry

Last Answer : Answer. This reaction is used in photography. (c) Slaked lime is formed with hissing sound and lot of heat is envolved.