The Gauss seidel load flow method has the following disadvantages. Tick the incorrect statement.

The Gauss seidel load flow method has the following disadvantages. Tick the incorrect statement. 

A) Unreliable convergence B) Slow convergence C) Choice of slack bus affects convergence D) A good initial guess for voltages is essential for convergence
by

1 Answer

Answer :

The Gauss seidel load flow method has the following disadvantages. Tick the incorrect statement. 

A) Unreliable convergence B) Slow convergence C) Choice of slack bus affects convergence D) A good initial guess for voltages is essential for convergence

by

Related questions

In Gauss Seidel method the following factors are influenced for operation a) Acceleration factor b) Selection of slack buss c) Both d) None

Description : In Gauss Seidel method the following factors are influenced for operation a) Acceleration factor b) Selection of slack buss c) Both d) None

Last Answer : Ans: Selection of slack buss*

Advantage of Gauss-Seidel method is a) applicable for large power system network b) calculation time for each iteration is less c) number of iterations are less d) all of the above

Description : Advantage of Gauss-Seidel method is a) applicable for large power system network b) calculation time for each iteration is less c) number of iterations are less d) all of the above

Last Answer : b) calculation time for each iteration is less

Compared to Gauss-Seidel method, Newton- Raphson method takes :

Description : Compared to Gauss-Seidel method, Newton-Raphson method takes : A. less number of iterations and more time per iteration B. less number of iterations and less time per iteration C, more number of iterations and more time per iteration D. more number of iterations and less time per iteration

Last Answer : Compared to Gauss-Seidel method, Newton-Raphson method takes : A. less number of iterations and more time per iteration B. less number of iterations and less time per iteration ... of iterations and more time per iteration D. more number of iterations and less time per iteration

Gauss-Seidel iterative method can be used for solving a set of?

Description :  Gauss-Seidel iterative method can be used for solving a set of?

Last Answer :  Gauss-Seidel iterative method can be used for solving a set of linear algebraic equation only.

The load-flow solution is always assured in case of:

Description :  The load-flow solution is always assured in case of: A) Newton-Raphson method B) Gauss-Seidel method C) Fast Decoupled method D) None of these methods guarantee

Last Answer : D

Tick out the incorrect match: List I (Ore) List II (Mineral) a) Dolomite- MgCO3 b) Gibbsite3- H2O c) Gypsum2- H2O d) Geothite- Fe2O3

Description : Tick out the incorrect match: List I (Ore) List II (Mineral) a) Dolomite- MgCO3 b) Gibbsite3- H2O c) Gypsum2- H2O d) Geothite- Fe2O3

Last Answer : d) Geothite- Fe2O3

It is impossible for any process to have as its sole result the transfer of heat from a cooler to a hotter body  a. Carnot’s statement  b. Clausius statement  c. Rankine statement  d. Gauss statement

Description : It is impossible for any process to have as its sole result the transfer of heat from a cooler to a hotter body  a. Carnot’s statement  b. Clausius statement  c. Rankine statement  d. Gauss statement

Last Answer : Clausius statement

Tick the wrong statement. a) Velocity of light is independent of the motion of the observer. b) Velocity of light in free space is the same in all directions. c) Velocity of light in free space is different in different directions. d) Absolute motion or absolute rest is meaningless to talk about

Description : Tick the wrong statement. a) Velocity of light is independent of the motion of the observer. b) Velocity of light in free space is the same in all directions. c) Velocity of light in free space is different in different directions. d) Absolute motion or absolute rest is meaningless to talk about

Last Answer : c) Velocity of light in free space is different in different directions

Select the incorrect statement. (A) Bearing capacity of a soil depends upon the amount and direction of load (B) Bearing capacity of a soil depends on the type of soil (C) Bearing capacity of a soil depends upon shape and size of footing (D) Bearing capacity of a soil is independent of rate of loading

Description : Select the incorrect statement. (A) Bearing capacity of a soil depends upon the amount and direction of load (B) Bearing capacity of a soil depends on the type of soil (C) Bearing capacity of a ... upon shape and size of footing (D) Bearing capacity of a soil is independent of rate of loading

Last Answer : Answer: Option A

Pick up the incorrect statement from the following: (A) The width of the wall is constructed thicker at the base in a stepped fashion (B) A long vertical load transferring concrete structure is called a concrete pile (C) In pile which transfers the load to the soil by the friction between the pile and the surrounding soil is called friction pile (D) The pile which transfers the load to a hard rock bed at certain depth is called load bearing

Description : Pick up the incorrect statement from the following: (A) The width of the wall is constructed thicker at the base in a stepped fashion (B) A long vertical load transferring concrete structure is ... ) The pile which transfers the load to a hard rock bed at certain depth is called load bearing

Last Answer : Answer: Option D

Pick up the incorrect statement from the following: (A) The function of foundation is to distribute the load of super structure over a large bearing area (B) No timbering is required for shallow trenches (C) Shallow foundations can be constructed on made-up soil (D) Black cotton soil is very good for foundation bed

Description : Pick up the incorrect statement from the following: (A) The function of foundation is to distribute the load of super structure over a large bearing area (B) No timbering is required for shallow ... can be constructed on made-up soil (D) Black cotton soil is very good for foundation bed

Last Answer : Answer: Option D

Pick up the incorrect statement from the following: A. Septic tanks are horizontal continuous flow type of sedimentation tanks B. Septic tanks are generally provided a detention period of 12 to 36 hours C. Septic tanks are completely covered and high vent shafts are provided for the escape of foul gases D. None of these

Description : Pick up the incorrect statement from the following: A. Septic tanks are horizontal continuous flow type of sedimentation tanks B. Septic tanks are generally provided a detention period of 12 to 36 hours C ... covered and high vent shafts are provided for the escape of foul gases D. None of these

Last Answer : ANS: D

Pick up the incorrect statement from the following: (A) The flow in strainer type wells is radial (B) The flow in cavity type wells in spherical(C) In strainer type wells, area of flow depends upon the length of the strainer pipe (D) In cavity type wells, area of flow depends upon the size of the cavity

Description : Pick up the incorrect statement from the following:  (A) The flow in strainer type wells is radial  (B) The flow in cavity type wells in spherical  (C) In strainer type wells, area of flow ... pipe  (D) In cavity type wells, area of flow depends upon the size of the cavity 

Last Answer : (C) In strainer type wells, area of flow depends upon the length of the strainer pipe 

Pick up the incorrect statement from the following: (A) The net amount of water which joins the surface streams in a catchment, is known as surface run-off (B) The amount of water which joins the stream from the underground water, is called base flow (C) The yearly run off in cm depth over the catchment, is termed as the yield of the drainage basin(D) None of these

Description : Pick up the incorrect statement from the following:  (A) The net amount of water which joins the surface streams in a catchment, is known as  surface run-off  (B) The amount of water which ... over the catchment, is termed as the yield of the drainage  basin  (D) None of these

Last Answer : (D) None of these

Pick up the incorrect statement from the following: (A) The rate of flow of water through a unit cross-sectional area under a unit hydraulic gradient, is called coefficient of permeability (B) The rate of flow of water through a vertical strip of the aquifer of unit width and full depth under a unit hydraulic gradient, is called coefficient of transmissibility (C) The flow of water through aquifers, is governed by the Darcy's law (D) The term 'transmissibility' was introduced by Meinzer

Description : Pick up the incorrect statement from the following: (A) The rate of flow of water through a unit cross-sectional area under a unit hydraulic gradient, is called coefficient of permeability (B) ... aquifers, is governed by the Darcy's law (D) The term 'transmissibility' was introduced by Meinzer

Last Answer : Answer: Option D

Indicate which of the statement is incorrect (a) The detritus tank is type of a grit chamber (b) In detritus tank, velocity of flow is further reduced (c) Grit chambers are provided in the sewage treatment process to remove the heavier inorganic matter as grit, sand etc. from the sewage (d) None of them*

Description : Indicate which of the statement is incorrect (a) The detritus tank is type of a grit chamber (b) In detritus tank, velocity of flow is further reduced (c) Grit chambers are provided in the sewage ... to remove the heavier inorganic matter as grit, sand etc. from the sewage (d) None of them*

Last Answer : (d) None of them*

Select the incorrect statement. (A) The progress of work in low level method of mound construction is very slow (B) Barge method of mound construction is economical (C) In low level method of mound construction, the area of working is limited (D) In staging method of mound construction, the work is not interrupted even during stormy weather

Description : Select the incorrect statement. (A) The progress of work in low level method of mound construction is very slow (B) Barge method of mound construction is economical (C) In low level method ... (D) In staging method of mound construction, the work is not interrupted even during stormy weather

Last Answer : (B) Barge method of mound construction is economical

Select incorrect statement from the following. In the Virtual work method, it is generally assumed that [ A ] Elastic deformations in the slab are negligible [ B ] Plastic deformations in the slab are negligible [ C ] Plastic deformations takes place at the yield lines [ D ] Both (a) and (b)

Description : Select incorrect statement from the following. In the Virtual work method, it is generally assumed that [ A ] Elastic deformations in the slab are negligible [ B ] Plastic deformations in the slab are negligible [ C ] Plastic deformations takes place at the yield lines [ D ] Both (a) and (b)

Last Answer : [ B ] Plastic deformations in the slab are negligible

Would this gauss meter be any good?

Description : Would this gauss meter be any good?

Last Answer : answer:Oooo!!! Did you get the Chony? Made in Mississigua Ont? I have one of those and love it. I cannot tell about the gauss meter. TI could be anything. Sorry. The Chony on the other hand is fantastic.

When the celebrated German mathematician Karl Friedrich Gauss (1777-1855) was nine he was asked to add all the integers from 1 through 100. He quickly added 1 to 100, 2 to 99, and so on for 50 pairs of numbers each adding to 101. 50 X 101=5,050.Now find the sum of all the digits in integers from 1 through 1,000,000,000.That's all the digits in all the numbers, not all the numbers themselves. -Riddles

Description : When the celebrated German mathematician Karl Friedrich Gauss (1777-1855) was nine he was asked to add all the integers from 1 through 100. He quickly added 1 to 100, 2 to 99, and so on for 50 pairs ... 1,000,000,000.That's all the digits in all the numbers, not all the numbers themselves. -Riddles

Last Answer : The numbers can be grouped by pairs: 999,999,999 and 0; 999,999,998 and 1' 999,999,997 and 2; and so on.... There are half a billion pairs, and the sum of the digits in each pair is 81. The digits in the unpaired number, 1,000,000,000, add to 1. Then: (500,000,000 X 81) + 1= 40,500,000,001.

In what year was Carl Frederick Gauss born ?

Last Answer : Carl Frederick Gauss was born in 1777 .

The illustrated circuits are used to measure ___________. EL-0024 A. resistance B. gauss or magnetic field strength C. battery discharge rate in Amp-hours D. current

Description : The illustrated circuits are used to measure ___________. EL-0024 A. resistance B. gauss or magnetic field strength C. battery discharge rate in Amp-hours D. current

Last Answer : Answer: A

The illustrated circuit is a _____________. EL-0024 A. megohm meter B. Gauss meter C. wheatstone bridge D. germanium diode tester

Description : The illustrated circuit is a _____________. EL-0024 A. megohm meter B. Gauss meter C. wheatstone bridge D. germanium diode tester

Last Answer : Answer: C

incidentally propose the geostationary scheme or orbit of the satellite in 1940s A. Arthur Clarke B. Carl Friedrich Gauss C. Samuel Morse D. Stephen Gray

Description : incidentally propose the geostationary scheme or orbit of the satellite in 1940s A. Arthur Clarke B. Carl Friedrich Gauss C. Samuel Morse D. Stephen Gray

Last Answer : A. Arthur Clarke

Which one of the following laws will not contribute to the Maxwell’s equations? a) Gauss law b) Faraday law c) Ampere law d) Curie Weiss law

Description : Which one of the following laws will not contribute to the Maxwell’s equations? a) Gauss law b) Faraday law c) Ampere law d) Curie Weiss law

Last Answer : d) Curie Weiss law

The Gauss law for magnetic field is valid in a) Air b) Conductor c) Dielectric d) All cases

Description : The Gauss law for magnetic field is valid in a) Air b) Conductor c) Dielectric d) All cases

Last Answer : d) All cases

The Gauss law employs which theorem for the calculation of charge density? a) Green theorem b) Stokes theorem c) Gauss theorem d) Maxwell equation

Description : The Gauss law employs which theorem for the calculation of charge density? a) Green theorem b) Stokes theorem c) Gauss theorem d) Maxwell equation

Last Answer : c) Gauss theorem

In a dipole, the Gauss theorem value will be a) 1 b) 0 c) -1 d) 2

Description : In a dipole, the Gauss theorem value will be a) 1 b) 0 c) -1 d) 2

Last Answer : b) 0

In the conversion of line integral of H into surface integral, which theorem is used? a) Green theorem b) Gauss theorem c) Stokes theorem d) It cannot be converted

Description : In the conversion of line integral of H into surface integral, which theorem is used? a) Green theorem b) Gauss theorem c) Stokes theore d) It cannot be converted

Last Answer : c) Stokes theorem

The Ampere law is based on which theorem? a) Green’s theorem b) Gauss divergence theorem c) Stoke’s theorem d) Maxwell theorem

Description : The Ampere law is based on which theorem? a) Green’s theorem b) Gauss divergence theorem c) Stoke’s theorem d) Maxwell theorem

Last Answer : c) Stoke’s theorem

Biot Savart law in magnetic field is analogous to which law in electric field? a) Gauss law b) Faraday law c) Coulomb’s law d) Ampere law

Description : Biot Savart law in magnetic field is analogous to which law in electric field? a) Gauss law b) Faraday law c) Coulomb’s law d) Ampere law

Last Answer : c) Coulomb’s law

Poisson equation can be derived from which of the following equations? a) Point form of Gauss law b) Integral form of Gauss law c) Point form of Ampere law d) Integral form of Ampere law

Description : Poisson equation can be derived from which of the following equations? a) Point form of Gauss law b) Integral form of Gauss law c) Point form of Ampere law d) Integral form of Ampere law

Last Answer : a) Point form of Gauss law

The continuity equation is a combination of which of the two laws? a) Ohm’s law and Gauss law b) Ampere law and Gauss law c) Ohm’s law and Ampere law d) Maxwell law and Ampere law

Description : The continuity equation is a combination of which of the two laws? a) Ohm’s law and Gauss law b) Ampere law and Gauss law c) Ohm’s law and Ampere law d) Maxwell law and Ampere law

Last Answer : b) Ampere law and Gauss law

With Gauss law as reference which of the following law can be derived? a) Ampere law b) Faraday’s law c) Coulomb’s law d) Ohm’s law

Description : With Gauss law as reference which of the following law can be derived? a) Ampere law b) Faraday’s law c) Coulomb’s law d) Ohm’s law

Last Answer : c) Coulomb’s law

Gauss law cannot be expressed in which of the following forms? a) Differential b) Integral c) Point d) Stokes theorem

Description : Gauss law cannot be expressed in which of the following forms? a) Differential b) Integral c) Point d) Stokes theorem

Last Answer : d) Stokes theorem

Gauss law can be evaluated in which coordinate system? a) Cartesian b) Cylinder c) Spherical d) Depends on the Gaussian surface

Description : Gauss law can be evaluated in which coordinate system? a) Cartesian b) Cylinder c) Spherical d) Depends on the Gaussian surface

Last Answer : d) Depends on the Gaussian surface

Gauss law can be used to compute which of the following? a) Permittivity b) Permeability c) Radius of Gaussian surface d) Electric potential

Description : Gauss law can be used to compute which of the following? a) Permittivity b) Permeability c) Radius of Gaussian surface d) Electric potential

Last Answer : c) Radius of Gaussian surface

It cannot be determined from Gauss law, whereas the remaining options can be computed from Gauss law. 10. Gauss law for magnetic fields is given by a) Div(E) = 0 b) Div(B) = 0 c) Div(H) = 0 d) Div(D) = 0

Description : It cannot be determined from Gauss law, whereas the remaining options can be computed from Gauss law. 10. Gauss law for magnetic fields is given by a) Div(E) = 0 b) Div(B) = 0 c) Div(H) = 0 d) Div(D) = 0

Last Answer : b) Div(B) = 0

Gauss law cannot be used to find which of the following quantity? a) Electric field intensity b) Electric flux density c) Charge d) Permittivity

Description : Gauss law cannot be used to find which of the following quantity? a) Electric field intensity b) Electric flux density c) Charge d) Permittivity

Last Answer : d) Permittivity

Divergence theorem is based on a) Gauss law b) Stoke’s law c) Ampere law d) Lenz law

Description : Divergence theorem is based on a) Gauss law b) Stoke’s law c) Ampere law d) Lenz law

Last Answer : a) Gauss law

Which of the following correctly states Gauss law? a) Electric flux is equal to charge b) Electric flux per unit volume is equal to charge c) Electric field is equal to charge density d) Electric flux per unit volume is equal to volume charge density

Description : Which of the following correctly states Gauss law? a) Electric flux is equal to charge b) Electric flux per unit volume is equal to charge c) Electric field is equal to charge density d) Electric flux per unit volume is equal to volume charge density

Last Answer : d) Electric flux per unit volume is equal to volume charge density

The Coulomb law is an implication of which law? a) Ampere law b) Gauss law c) Biot Savart law d) Lenz law

Description : The Coulomb law is an implication of which law? a) Ampere law b) Gauss law c) Biot Savart law d) Lenz law

Last Answer : b) Gauss law

Find the Gauss value for a position vector in Cartesian system from the origin to one unit in three dimensions. a) 0 b) 3 c) -3 d) 1

Description : Find the Gauss value for a position vector in Cartesian system from the origin to one unit in three dimensions. a) 0 b) 3 c) -3 d) 1

Last Answer : b) 3

The Gauss divergence theorem converts a) line to surface integral b) line to volume integral c) surface to line integral d) surface to volume integral

Description : The Gauss divergence theorem converts a) line to surface integral b) line to volume integral c) surface to line integral d) surface to volume integral

Last Answer : d) surface to volume integral

Gauss theorem uses which of the following operations? a) Gradient b) Curl c) Divergence d) Laplacian

Description : Gauss theorem uses which of the following operations? a) Gradient b) Curl c) Divergence d) Laplacian

Last Answer : c) Divergence

The Green’s theorem can be related to which of the following theorems mathematically? a) Gauss divergence theorem b) Stoke’s theorem c) Euler’s theorem d) Leibnitz’s theorem

Description : The Green’s theorem can be related to which of the following theorems mathematically? a) Gauss divergence theorem b) Stoke’s theorem c) Euler’s theorem d) Leibnitz’s theorem

Last Answer : b) Stoke’s theorem

Which of the following theorem convert line integral to surface integral? a) Gauss divergence and Stoke’s theorem b) Stoke’s theorem only c) Green’ s theorem only d) Stoke’s and Green’s theorem

Description : Which of the following theorem convert line integral to surface integral? a) Gauss divergence and Stoke’s theorem b) Stoke’s theorem only c) Green’ s theorem only d) Stoke’s and Green’s theorem

Last Answer : d) Stoke’s and Green’s theorem

The point form of Gauss law is given by, Div(V) = ρv State True/False. a) True b) False

Description : The point form of Gauss law is given by, Div(V) = ρv State True/False. a) True b) False

Last Answer : a) True

Compute the Gauss law for D = 10ρ 3 /4 i, in cylindrical coordinates with ρ = 4m, z = 0 and z = 5, hence find charge using volume integral. a) 6100 π b) 6200 π c) 6300 π d) 6400 π View Answe

Description : Compute the Gauss law for D = 10ρ 3 /4 i, in cylindrical coordinates with ρ = 4m, z = 0 and z = 5, hence find charge using volume integral. a) 6100 π b) 6200 π c) 6300 π d) 6400 π View Answe

Last Answer : d) 6400 π

Evaluate Gauss law for D = 5r 2 /4 i in spherical coordinates with r = 4m and θ = π/2 as volume integral. a) 600 b) 588.9 c) 577.8 d) 599.7

Description : Evaluate Gauss law for D = 5r 2 /4 i in spherical coordinates with r = 4m and θ = π/2 as volume integral. a) 600 b) 588.9 c) 577.8 d) 599.7

Last Answer : b) 588.9