In Gauss Seidel method the following factors are influenced for operation a) Acceleration factor b) Selection of slack buss c) Both d) None

In Gauss Seidel method the following factors are influenced for
operation
a) Acceleration factor
b) Selection of slack buss
c) Both
d) None
by

1 Answer

Answer :

Ans: Selection of slack buss*
by

Related questions

Advantage of Gauss-Seidel method is a) applicable for large power system network b) calculation time for each iteration is less c) number of iterations are less d) all of the above

Description : Advantage of Gauss-Seidel method is a) applicable for large power system network b) calculation time for each iteration is less c) number of iterations are less d) all of the above

Last Answer : b) calculation time for each iteration is less

The Gauss seidel load flow method has the following disadvantages. Tick the incorrect statement.

Description : The Gauss seidel load flow method has the following disadvantages. Tick the incorrect statement.  A) Unreliable convergence B) Slow convergence C) Choice of slack bus affects convergence D) A good initial guess for voltages is essential for convergence

Last Answer : The Gauss seidel load flow method has the following disadvantages. Tick the incorrect statement.  A) Unreliable convergence B) Slow convergence C) Choice of slack bus affects convergence D) A good initial guess for voltages is essential for convergence

Compared to Gauss-Seidel method, Newton- Raphson method takes :

Description : Compared to Gauss-Seidel method, Newton-Raphson method takes : A. less number of iterations and more time per iteration B. less number of iterations and less time per iteration C, more number of iterations and more time per iteration D. more number of iterations and less time per iteration

Last Answer : Compared to Gauss-Seidel method, Newton-Raphson method takes : A. less number of iterations and more time per iteration B. less number of iterations and less time per iteration ... of iterations and more time per iteration D. more number of iterations and less time per iteration

Gauss-Seidel iterative method can be used for solving a set of?

Description :  Gauss-Seidel iterative method can be used for solving a set of?

Last Answer :  Gauss-Seidel iterative method can be used for solving a set of linear algebraic equation only.

The market for heavy industrial equipment is concentrated in the West Midlands, so an equipment manufacturer has decided to employ a direct sales force in that region. Which factor most influenced this distribution channel selection? A)Buyer behaviour B)Product attributes C)Organisational objectives D)Environmental forces E)Market characteristics

Description : The market for heavy industrial equipment is concentrated in the West Midlands, so an equipment manufacturer has decided to employ a direct sales force in that region. Which factor ... A)Buyer behaviour B)Product attributes C)Organisational objectives D)Environmental forces E)Market characteristics

Last Answer : E)Market characteristics

Which of the following theorem use the curl operation? a) Green’s theorem b) Gauss Divergence theorem c) Stoke’s theorem d) Maxwell equation

Description : Which of the following theorem use the curl operation? a) Green’s theorem b) Gauss Divergence theorem c) Stoke’s theorem d) Maxwell equation

Last Answer : b) Gauss Divergence theorem

Which one of the following laws best describes the operation of an electric generator? w) Ampere's Law x) Gauss' Law y) Ohm's Law for Conductors z) Faraday's Law of Induction

Description : Which one of the following laws best describes the operation of an electric generator? w) Ampere's Law x) Gauss' Law y) Ohm's Law for Conductors z) Faraday's Law of Induction

Last Answer : ANSWER: Z -- FARADAY'S LAW OF INDUCTION 

The progressive operation of the contactors marked 'A' provide the winch shown in the illustration with __________. EL-0102 A. accumulation B. dynamic braking C. acceleration D. regenerative braking

Description : The progressive operation of the contactors marked 'A' provide the winch shown in the illustration with __________. EL-0102 A. accumulation B. dynamic braking C. acceleration D. regenerative braking

Last Answer : Answer: C

‘The law of limiting factors’ was proposed by (a) Leibig (b) Hatch and Slack (c) Blackman (d) Arnon.

Description : ‘The law of limiting factors’ was proposed by (a) Leibig (b) Hatch and Slack (c) Blackman (d) Arnon.

Last Answer : (c) Blackman

The illustrated circuits are used to measure ___________. EL-0024 A. resistance B. gauss or magnetic field strength C. battery discharge rate in Amp-hours D. current

Description : The illustrated circuits are used to measure ___________. EL-0024 A. resistance B. gauss or magnetic field strength C. battery discharge rate in Amp-hours D. current

Last Answer : Answer: A

The illustrated circuit is a _____________. EL-0024 A. megohm meter B. Gauss meter C. wheatstone bridge D. germanium diode tester

Description : The illustrated circuit is a _____________. EL-0024 A. megohm meter B. Gauss meter C. wheatstone bridge D. germanium diode tester

Last Answer : Answer: C

What is the need for slack bus

Description : What is the need for slack bus

Last Answer : The slack bus is needed to account for transmission line losses. In a power system the total power generated will be equal to sum of power consumed by loads and losses. In a power system only ... for losses. Since the losses are unknown the real and reactive power are not specified for slack bus.

What is the need for slack bus?

Description : What is the need for slack bus?

Last Answer : The slack bus is needed to account for transmission line losses. In a power system, the total power generated will be equal to sum of power consumed by loads and losses. In a power system, ... power are not specified for slack bus. They are estimated through the solution of line flow equations.

What is swing bus(slack bus/reference bus)?

Description : What is swing bus(slack bus/reference bus)?

Last Answer : A bus is called swing bus when the magnitude and phase of bus voltage are specified for it. The swing bus is the reference bus for load flow solution and it is required for accounting for the line losses. Usually one of the generator bus is selected as the swing bus.

What are the different factors for the selection of electrical drives?

Description : What are the different factors for the selection of electrical drives?

Last Answer : Steady state operation requirements Transient operation requirements Requirements related to the source Capital and running cost, maintenance needs, life Space and weight restrictions Environment and location Reliability

What are the factors affecting the selection of Maximum flux density?

Description : What are the factors affecting the selection of Maximum flux density?

Last Answer : 1. Net core weight: Higher the flux density lesser net weight of core. 2.Saving in copper:Higher the flux density lesser mean turn of windings. 3.Overall economy: Higher the flux ... High Flux density results in high losses and hence efficiency decreases 8.Hence high temperature rise and noise

In simplex method, if there is tie between a decision variable and a slack (or surplus) variable, ______ should be selected a. Slack variable b. Surplus variable c. Decision variable d. None of the above

Description : In simplex method, if there is tie between a decision variable and a slack (or surplus) variable, ______ should be selected a. Slack variable b. Surplus variable c. Decision variable d. None of the above

Last Answer : c. Decision variable

In simplex method, we add _______ variables in the case of “=” a. Slack variable b. Surplus variable c. Artificial variable d. None of the above

Description : In simplex method, we add _______ variables in the case of “=” a. Slack variable b. Surplus variable c. Artificial variable d. None of the above

Last Answer : c. Artificial variable

. In simplex algorithm, which method is used to deal with the situation where an infeasible starting basic solution is given? a. Slack variable b. Simplex method c. Big M Method d. None of the above

Description : . In simplex algorithm, which method is used to deal with the situation where an infeasible starting basic solution is given? a. Slack variable b. Simplex method c. Big M Method d. None of the above

Last Answer : b. Simplex method

66. Which method is an iterative procedure for solving LPP in a finite number of steps? a. Simplex algorithm b. Slack variablec. Big M method d. Simplex method

Description : 66. Which method is an iterative procedure for solving LPP in a finite number of steps? a. Simplex algorithm b. Slack variable c. Big M method d. Simplex method

Last Answer : d. Simplex method

In a load flow problem solved by newton-Raphson method with polar coordinates, the size of the Jactobian is 100 × 100. If there are 20 PV buses in addition to PQ buses and a slack bus, the total number of buses in the system is_____

Description : In a load flow problem solved by newton-Raphson method with polar coordinates, the size of the Jactobian is 100 × 100. If there are 20 PV buses in addition to PQ buses and a slack bus, the total number of buses in the system is_____

Last Answer : 61

In simplex method, ........................ should be selected when there is tie between slack/surplus variable and decision variable. a. Slack variable b. Decision variable c. Surplus variable d. None of these

Description : In simplex method, ........................ should be selected when there is tie between slack/surplus variable and decision variable. a. Slack variable b. Decision variable c. Surplus variable d. None of these

Last Answer : b. Decision variable

In simplex method, we add .......................... in the case of constraints with sign “=” a. Surplus variable b. Artificial variable c. Slack variable d. None of these

Description : In simplex method, we add .......................... in the case of constraints with sign “=” a. Surplus variable b. Artificial variable c. Slack variable d. None of these

Last Answer : b. Artificial variable

Discuss the effect of acceleration factor in load flow study.

Description : Discuss the effect of acceleration factor in load flow study.

Last Answer : The acceleration factor is a real quantity and it modify the magnitude of voltage alone.

What factors do you think have influenced who you find physically attractive?

Description : What factors do you think have influenced who you find physically attractive?

Last Answer : answer:My dna and my area’s examples. I don’t even know my half-sibs well and we all married men with somewhat similar appearances and traits. Pretty wild.

Mention any two factors which have influenced the development of the Electronic City of Bengaluru. -Geography

Description : Mention any two factors which have influenced the development of the Electronic City of Bengaluru. -Geography

Last Answer : Factors that influenced the development of the Electronic city of Bengaluru are : 1. The incentives by the state and central government. 2. The strategic location of the city in the ... number of Indian, foreign and multinational companies have invested large sums of money to nourish industries.

Discuss any two factors which have influenced Ahmedabad to develop as the largest centre of cotton textile industry in Gujarat. -Geography

Description : Discuss any two factors which have influenced Ahmedabad to develop as the largest centre of cotton textile industry in Gujarat. -Geography

Last Answer : Ahmedabad is the largest centre of cotton textile in Gujarat and the second-largest centre after Mumbai. 1. Ahmedabad lies near the main cotton-growing region of India and there is no problem of ... Even the mills produce cheap cloth. This cloth finds ready market amongst the poor masses of India.

Mention three factors which have influenced the development of the Electronic City of Bengaluru. -Geography

Description : Mention three factors which have influenced the development of the Electronic City of Bengaluru. -Geography

Last Answer : Three factors which have influenced the development of electronic city of Bengaluru are : 1. The incentives by the state and central governments. 2. The strategic location of the city in ... multinational companies have invested a huge sum of money to nourish electronic industries in this city.

Mention the factors which have influenced the change in the methods of cultivation. -Geography

Description : Mention the factors which have influenced the change in the methods of cultivation. -Geography

Last Answer : The farming activity is very much different from the old traditional way to the modern way of farming. There are very much changes in the methods of cultivation. The factors which have been ... difference will be according to the climatic features of the areas and crops which they are cultivating.

The distribution pattern of the railway network in India has been mainly influenced by physiographic and economic factors.' Support the statement with suitable examples. -SST 10th

Description : The distribution pattern of the railway network in India has been mainly influenced by physiographic and economic factors.' Support the statement with suitable examples. -SST 10th

Last Answer : The physiographic, economic and administrative factors have played an important role in the distribution of railway networks 1. The Northern Plains with vast level land, high population density and rich ... the same time has faced problems such as sinking of track in some stretches and landslides.

Analyse the physiographic and economic factors that have influenced the distribution pattern of the railway network in our country. -SST 10th

Description : Analyse the physiographic and economic factors that have influenced the distribution pattern of the railway network in our country. -SST 10th

Last Answer : The physiographic and economic factors that influenced the distribution pattern of Indian Railways: 1. Northern Plains were the most favourable because of its level land, agricultural prowess, and ... the most important economic region of Indian although some problems like sinking of track exist.

The distribution pattern of Indian Railway network is influenced by the physiographic factors Examine the statement. -SST 10th

Description : The distribution pattern of Indian Railway network is influenced by the physiographic factors Examine the statement. -SST 10th

Last Answer : The physiographic factors that influenced the distribution pattern of Indian Railways: 1. Northern Plains were the most favourable because of its level land, agricultural prowess, and high ... Rajasthan, Gujarat swamps and forested tracks of Madhya Pradesh, Chhattisgarh, Odisha, and Jharkhand.

“The distribution pattern of the Railways network in the country has been largely influenced by physiographic factors” - Support the statement with four examples. -SST 10th

Description : “The distribution pattern of the Railways network in the country has been largely influenced by physiographic factors” - Support the statement with four examples. -SST 10th

Last Answer : Physiographic factors regulate the distribution pattern of railways network. High mountains, broad rivers, dense forest, swampy land caused hindrance in the distribution pattern of railway networks in India.

Analyse the physiographic and economic factors that have influenced the distribution pattern of the railway network in our country. -SST 10th

Description : Analyse the physiographic and economic factors that have influenced the distribution pattern of the railway network in our country. -SST 10th

Last Answer : The distribution pattern of the railway network in the country has been largely influenced by physiographic and economic factors: (i) The northern plains with their vast level land, high ... has facilitated the movement of passengers and goods in this most important economic region of India.

The distribution pattern of the Railway network in the country has been largely influenced by physiographic, economic and administrative factors.' -SST 10th

Description : The distribution pattern of the Railway network in the country has been largely influenced by physiographic, economic and administrative factors.' -SST 10th

Last Answer : Examples of the distribution pattern of the railway network in the country being influenced by physiographic and economic factors are: Physiographic Factors (i) The Northern Plains with their vast ... to each other, e.g., recently railway network is enhancing along the industrial corridors

Analyse the physiographic and economic factors that have influenced the distribution pattern of the railway network in our country. -SST 10th

Description : Analyse the physiographic and economic factors that have influenced the distribution pattern of the railway network in our country. -SST 10th

Last Answer : Rail transport is the most convenient mode of transportation. Though the railway network is not evenly distributed across the country. The distribution pattern of the railway network in the ... complimentary to each other e.g. recently railways network is enhancing along the industrial corridors.

What of the following factors least influenced the founding of the confederate states of America?

Description : What of the following factors least influenced the founding of the confederate states of America?

Last Answer : We don’t have your list so therefore can not provide aanswer.

What two factors influenced us sympathies in ww1?

Description : What two factors influenced us sympathies in ww1?

Last Answer : What is the answer ?

Feedback inhibition of enzyme is influenced by (A) Enzyme (B) External factors (C) End product (D) Substrate

Description : Feedback inhibition of enzyme is influenced by (A) Enzyme (B) External factors (C) End product (D) Substrate

Last Answer : Answer : C

The type and degree of flooding is influenced by many factors, such as (a) Climatological (b) Hydrological and environmental conditions (c) Local geomorphology of the flood plain (d) All of the above

Description : The type and degree of flooding is influenced by many factors, such as (a) Climatological (b) Hydrological and environmental conditions (c) Local geomorphology of the flood plain (d) All of the above

Last Answer : (d) All of the above

The moments developed in the slab are influenced by the following factors i.Short span ii.Long span iii.Type of supporting edge. iv.Magnitude and type of load on slab [ A ] i, iii and iv [ B ] ii ,iii and iv [ C ] i and iii [ D ] i, ii , iii and iv

Description : The moments developed in the slab are influenced by the following factors i.Short span ii.Long span iii.Type of supporting edge. iv.Magnitude and type of load on slab [ A ] i, iii and iv [ B ] ii ,iii and iv [ C ] i and iii [ D ] i, ii , iii and iv

Last Answer : [ D ] i, ii , iii and iv

Robert is a marketer for a global consumer products company. He is working on the promotional campaign designed to reach a target audience in a new international market. Robert is working hard to make sure that the promotional campaign is clearly understood by the nation's consumers and doesn't offend anyone. Which of the factors in the external environment is he being influenced by? A. Socio-cultural environment B. Competitive environment C. Economic environment D. Legal environment

Description : Robert is a marketer for a global consumer products company. He is working on the promotional campaign designed to reach a target audience in a new international market. Robert is working ... A. Socio-cultural environment B. Competitive environment C. Economic environment D. Legal environment

Last Answer : A. Socio-cultural environment

The choice of communication partners is influenced by factors of (A) Proximity, utility, loneliness (B) Utility, secrecy, dissonance (C) Secrecy, dissonance, deception (D) Dissimilarity, dissonance, deviance

Description : The choice of communication partners is influenced by factors of (A) Proximity, utility, loneliness (B) Utility, secrecy, dissonance (C) Secrecy, dissonance, deception (D) Dissimilarity, dissonance, deviance

Last Answer : (A) Proximity, utility, loneliness

Slack time refers to (A) An activity (B) An event (C) Both event and activity (D) None of the above

Description : Slack time refers to (A) An activity (B) An event (C) Both event and activity (D) None of the above

Last Answer : (B) An event

Slack time is associated with (a) A real activity (b) An event (c) Both event and real activity (d) Dummy activity

Description : Slack time is associated with (a) A real activity (b) An event (c) Both event and real activity (d) Dummy activity

Last Answer : (b) An event

.......................... is the duration by which an activity can be delayed without delaying the project. a. Slack b. Total float c. Both a and b d. None of these

Description : .......................... is the duration by which an activity can be delayed without delaying the project. a. Slack b. Total float c. Both a and b d. None of these

Last Answer : b. Total float

In an alternating current electrical system, a low system power factor is a direct sign of _____________. A. wasted energy B. efficient operation C. a short in the exciter field windings D. an excessive number of minor system grounds

Description : In an alternating current electrical system, a low system power factor is a direct sign of _____________. A. wasted energy B. efficient operation C. a short in the exciter field windings D. an excessive number of minor system grounds

Last Answer : Answer: A

What human-influenced environmental factor has the greatest impact on global warming?

Description : What human-influenced environmental factor has the greatest impact on global warming?

Last Answer : Environmentally, the answer is probably deforestation. The great forests of the world, which used to remove thousands of tons of carbon dioxide from the atmosphere, have been cut down.

Which of the following operation is used if we are interested in only certain columns of a table? (A) PROJECTION (B) SELECTION (C) UNION (D) JOIN

Description : Which of the following operation is used if we are interested in only certain columns of a table? (A) PROJECTION (B) SELECTION (C) UNION (D) JOIN

Last Answer : (A) PROJECTION