What is the latent heat of fusion of water at 1 atm?  A. 331.1 kJ/kg  B. 332.6 kJ/kg  C. 333.7 kJ/kg  D. 330.7 kJ/kg

What is the latent heat of fusion of water at 1 atm?
 A. 331.1 kJ/kg
 B. 332.6 kJ/kg
 C. 333.7 kJ/kg
 D. 330.7 kJ/kg
by

1 Answer

Answer :

333.7 kJ/kg
by

Related questions

What is the latent heat of vaporization of water at 1 atm?  A. 2314.8 kJ/kg  B. 2257.1 kJ/kg  C. 2511.7 kJ/kg  D. 2429.8 kJ/kg

Description : What is the latent heat of vaporization of water at 1 atm?  A. 2314.8 kJ/kg  B. 2257.1 kJ/kg  C. 2511.7 kJ/kg  D. 2429.8 kJ/kg

Last Answer : 2257.1 kJ/kg

In which Article of the Constitution of India was the provision for reservation of scheduled castes in the Lok Sabha made? (1) Article 330 (2) Article 331 (3) Article 332 (4) Article 333

Description : In which Article of the Constitution of India was the provision for reservation of scheduled castes in the Lok Sabha made? (1) Article 330 (2) Article 331 (3) Article 332 (4) Article 333

Last Answer : (1) Article 330 Explanation: In the Indian Constitution, seats have been reserved in the Lok Sabha for Scheduled Castes and Scheduled Tribes in Article -330.

A 1-kg steam-water mixture at 1.0 MPa is contained in an inflexible tank. Heat is added until the pressure rises to 3.5 MPa and the temperature to 400°. Determine the heat added.  a) 1378.7 kJ  b) 1348.5 kJ  c) 1278,7 kJ  d) 1246,5 kJ Formula: Q = (h2 – p2v2) –(h1 –p1v1)

Description : A 1-kg steam-water mixture at 1.0 MPa is contained in an inflexible tank. Heat is added until the pressure rises to 3.5 MPa and the temperature to 400°. Determine the heat added.  a) 1378.7 kJ  b) 1348.5 kJ  c) 1278,7 kJ  d) 1246,5 kJ Formula: Q = (h2 – p2v2) –(h1 –p1v1)

Last Answer : 1378.7 kJ

From the steam table, determine the average constant pressure specific heat (c) of steam at 10 kPa and45.8 ˚C  A.1.79 kJ/ kg-˚C  B.10.28 kJ/ kg-˚C  C.30.57 kJ/ kg-˚C  D. 100.1 kJ/ kg-˚C Formula: h = c T ∆ ∆ From the steam table At 47.7 ˚C h= 2588.1 kJ/ kg At 43.8 ˚C h= 2581.1 kJ/ kg

Description : From the steam table, determine the average constant pressure specific heat (c) of steam at 10 kPa and45.8 ˚C  A.1.79 kJ/ kg-˚C  B.10.28 kJ/ kg-˚C  C.30.57 kJ/ kg-˚C  D. 100.1 kJ/ kg-˚C Formula: h = c T ∆ ∆ From the steam table At 47.7 ˚C h= 2588.1 kJ/ kg At 43.8 ˚C h= 2581.1 kJ/ kg

Last Answer : 1.79 kJ/ kg-˚C

The heat absorbed by a unit mass of a material at its holding point in order to convert the material into a gas at the same temperature.  a. Latent Heat of Sublimation  b. Latent Heat of Vaporization  c. Latent Heat of Fusion  d. Latent Heat Of Condensation

Description : The heat absorbed by a unit mass of a material at its holding point in order to convert the material into a gas at the same temperature.  a. Latent Heat of Sublimation  b. Latent Heat of Vaporization  c. Latent Heat of Fusion  d. Latent Heat Of Condensation

Last Answer : Latent Heat of Vaporization

Which of the following cannot be measured by a thermometer?  a. Latent Heat  b. Sensible Heat  c. Specific Heat  d. Heat of Fusion

Description : Which of the following cannot be measured by a thermometer?  a. Latent Heat  b. Sensible Heat  c. Specific Heat  d. Heat of Fusion

Last Answer : Latent Heat

Heat which causes a change in temperature of a substance.  a. Latent heat  b. Sensible heat  c. Specific heat  d. Heat of Fusion

Description : Heat which causes a change in temperature of a substance.  a. Latent heat  b. Sensible heat  c. Specific heat  d. Heat of Fusion

Last Answer : Sensible heat

The ______ of a substance is the amount of heat that must be added or removed from a unit mass of the substance to change its temperature by one degree.  A. Latent heat of fusion  B. Molar heat  C. Specific heat capacity  D. Specific heat

Description : The ______ of a substance is the amount of heat that must be added or removed from a unit mass of the substance to change its temperature by one degree.  A. Latent heat of fusion  B. Molar heat  C. Specific heat capacity  D. Specific heat

Last Answer : Specific heat capacity

What is defined as the energy required to raise the temperature of a unit mass of a substance by one degree?  A. Latent heat of fusion  B. Molar heat  C. Specific heat capacity  D. Specific heat

Description : What is defined as the energy required to raise the temperature of a unit mass of a substance by one degree?  A. Latent heat of fusion  B. Molar heat  C. Specific heat capacity  D. Specific heat

Last Answer : Specific heat

There are 1.36 kg of gas, for which R = 377 J/kg.k and k = 1.25, that undergo a nonflow constant volume process from p1 = 551.6 kPa and t1 = 60°C to p2 = 1655 kPa. During the process the gas is internally stirred and there are also added 105.5 kJ of heat. Determine t2. (Formula: T2= T1p2/ p1)  a. 999 K  b. 888 K  c. 456 K  d. One of the above

Description : There are 1.36 kg of gas, for which R = 377 J/kg.k and k = 1.25, that undergo a nonflow constant volume process from p1 = 551.6 kPa and t1 = 60°C to p2 = 1655 kPa. During the process the gas is internally stirred and ... (Formula: T2= T1p2/ p1)  a. 999 K  b. 888 K  c. 456 K  d. One of the above

Last Answer : 999 K

Water (specific heat cv= 4.2 kJ/ kg ∙ K ) is being heated by a 1500 W h eater. What is the rate of change in temperature of 1kg of the water?  A. 0.043 K/s  B. 0.179 K/s  C. 0.357 K/s  D. 1.50 K/s Formula: Q = mcv ( T)

Description : Water (specific heat cv= 4.2 kJ/ kg ∙ K ) is being heated by a 1500 W h eater. What is the rate of change in temperature of 1kg of the water?  A. 0.043 K/s  B. 0.179 K/s  C. 0.357 K/s  D. 1.50 K/s Formula: Q = mcv ( T)

Last Answer : 0.179 K/s

Specific heat capacity in SI unit.  a. kJ / kg.k  b. kJ / kg  c. kN / kg  d. None of the above

Description : Specific heat capacity in SI unit.  a. kJ / kg.k  b. kJ / kg  c. kN / kg  d. None of the above

Last Answer : kJ / kg.k

A 10m^3 vessel initially contains 5 m^3 of liquid water and 5 m^3 of saturated water vapor at 100 kPa. Calculate the internal energy of the system using the steam table.  A. 5 x10^5 kJ  B. 8x10^5 kJ  C. 1 x10^6 kJ  D. 2 x10^6 kJ Formula: fromthe steamtable vƒ = 0.001043 m^3 / kg vg = 1.6940 m^3 / kg u ƒ= 417.3 kJ/kg ug= 2506kJ/kg formula: Mvap = V vap/vg M liq = Vliq/ vƒ u =uƒM liq + ug M vap

Description : A 10m^3 vessel initially contains 5 m^3 of liquid water and 5 m^3 of saturated water vapor at 100 kPa. Calculate the internal energy of the system using the steam table.  A. 5 x10^5 kJ  B. 8x10^5 kJ  C. 1 ... 3 kJ/kg ug= 2506kJ/kg formula: Mvap = V vap/vg M liq = Vliq/ vƒ u =uƒM liq + ug M vap

Last Answer : 2 x10^6 kJ

What is the amount of heat needed to turn 1 kg of the substance at its melting point from the solid to liquid state?  A. Heat of fusion  B. Heat of vaporation  C. Heat of condensation  D. Heat of fission

Description : What is the amount of heat needed to turn 1 kg of the substance at its melting point from the solid to liquid state?  A. Heat of fusion  B. Heat of vaporation  C. Heat of condensation  D. Heat of fission

Last Answer : Heat of fusion

2000 kJ of heat is supplied to 500 kg of ice at 0oC. If the latent heat of fusion of ice is 335 kJ/kg then the amount of ice in kg melted will be a) 1.49 b) 83.75 c) 5.97 d) None of the above

Description : 2000 kJ of heat is supplied to 500 kg of ice at 0oC. If the latent heat of fusion of ice is 335 kJ/kg then the amount of ice in kg melted will be a) 1.49 b) 83.75 c) 5.97 d) None of the above

Last Answer : c) 5.97

Steam is throttled to 0.1 MPa with 20 degrees of superheat. (a) What is the quality of throttled steam if its pressure is 0.75 MPa (b) What is the enthalpy of the process?  a) 97.6%,2713 kJ/kg  b) -97.6%, 2713 kJ/kg  c) 87.6%,3713 kJ/kg  d) -87.6%, 3713 kJ/kg

Description : Steam is throttled to 0.1 MPa with 20 degrees of superheat. (a) What is the quality of throttled steam if its pressure is 0.75 MPa (b) What is the enthalpy of the process?  a) 97.6%,2713 kJ/kg  b) -97.6%, 2713 kJ/kg  c) 87.6%,3713 kJ/kg  d) -87.6%, 3713 kJ/kg

Last Answer : 97.6%,2713 kJ/kg

The combined mass of car and passengers travelling at 72 km/hr is 1500 kg. Find the kinetic energy of this combined mass. (Formula: K =mv2 / 2k )  a. 300 kJ  b. 200 kJ  c. 500 kJ  d. None of the above

Description : The combined mass of car and passengers travelling at 72 km/hr is 1500 kg. Find the kinetic energy of this combined mass. (Formula: K =mv2 / 2k )  a. 300 kJ  b. 200 kJ  c. 500 kJ  d. None of the above

Last Answer : 300 kJ

What is the unit of the total energy of the system?  A. Kj  B. Kj/Kg  C. Kg  D. g

Description : What is the unit of the total energy of the system?  A. Kj  B. Kj/Kg  C. Kg  D. g

Last Answer : Kj

A gas is compressed in a cylinder by a movable piston to a volume onehalf its original volume. During the process 300 kJ heat left the gas and internal energy remained same. The work done on gas in Nm will be  (a) 300 Nm  (b) 300,000 Nm  (c) 30 Nm  (d) 3000 Nm  (e) 30,000 Nm.

Description : A gas is compressed in a cylinder by a movable piston to a volume onehalf its original volume. During the process 300 kJ heat left the gas and internal energy remained same. The work done on gas in Nm will be  (a) 300 Nm  (b) 300,000 Nm  (c) 30 Nm  (d) 3000 Nm  (e) 30,000 Nm.

Last Answer : Answer : b

Water vapor at 100 KPa and 150°C is compressed isothermally until half the vapor has condensed. How much work must be performed on the steam in this compression process per kilogram?  a) -1384.7 kJ  b) 1384.7 kJ  c) -2384.7 kJ  d) 2384.7 kJ

Description : Water vapor at 100 KPa and 150°C is compressed isothermally until half the vapor has condensed. How much work must be performed on the steam in this compression process per kilogram?  a) -1384.7 kJ  b) 1384.7 kJ  c) -2384.7 kJ  d) 2384.7 kJ

Last Answer : -1384.7 kJ

What is defined as the quantity of heat needed to raise the temperature of one kilogram of water by one degrees Celsius?  a. Kilojoule  b. Btu  c. Kilocalorie  d. Latent heat

Description : What is defined as the quantity of heat needed to raise the temperature of one kilogram of water by one degrees Celsius?  a. Kilojoule  b. Btu  c. Kilocalorie  d. Latent heat

Last Answer : Kilocalorie

What refers to the heat needed to change the temperature of the substances without changing its phases?  a. Latent heat  b. Sensible heat  c. Specific heat  d. entropy

Description : What refers to the heat needed to change the temperature of the substances without changing its phases?  a. Latent heat  b. Sensible heat  c. Specific heat  d. entropy

Last Answer : Sensible heat

What is the measure of the energy that is no longer available to perform useful work within the current environment?  a. enthalpy  b. entropy  c. internal energy  d. latent heat

Description : What is the measure of the energy that is no longer available to perform useful work within the current environment?  a. enthalpy  b. entropy  c. internal energy  d. latent heat

Last Answer : entropy

What is known as the total heat and heat content at various times in the history?  a. enthalpy  b. entropy  c. internal energy  d. latent heat

Description : What is known as the total heat and heat content at various times in the history?  a. enthalpy  b. entropy  c. internal energy  d. latent heat

Last Answer : enthalpy

Heat that cause change in phase without a change in temperature.  a) Sensible Heat  b) Latent Heat  c) Thermo Heat  d) None of the above

Description : Heat that cause change in phase without a change in temperature.  a) Sensible Heat  b) Latent Heat  c) Thermo Heat  d) None of the above

Last Answer : Latent Heat

Heat that cause change in temperature at without a change in phase.  a) Sensible Heat  b) Latent Heat  c) Thermo Heat  d) None of the above

Description : Heat that cause change in temperature at without a change in phase.  a) Sensible Heat  b) Latent Heat  c) Thermo Heat  d) None of the above

Last Answer : Sensible Heat

Who coined the term latent heat?  a. John Thompson  b. Studey Baker  c. Joe di Maggio  d. Joseph Black

Description : Who coined the term latent heat?  a. John Thompson  b. Studey Baker  c. Joe di Maggio  d. Joseph Black

Last Answer : Joseph Black

The heat Q per unit mass per degree change in temperature that must be supplied or removed to change the temperature of a substance.  a. Specific Heat Capacity  b. Latent Heat  c. Heat of Transformation  d. Internal Heat

Description : The heat Q per unit mass per degree change in temperature that must be supplied or removed to change the temperature of a substance.  a. Specific Heat Capacity  b. Latent Heat  c. Heat of Transformation  d. Internal Heat

Last Answer : Specific Heat Capacity

The amount of heat energy per kilogram that must be added or removed when a substance changes from one phase to another.  a. specific heat  b. heat of expansion  c. latent heat  d. useful heat

Description : The amount of heat energy per kilogram that must be added or removed when a substance changes from one phase to another.  a. specific heat  b. heat of expansion  c. latent heat  d. useful heat

Last Answer : latent heat

What refers to the amount of energy absorbed or released during a phase-change process?  A. Molar heat  B. Latent heat  C. Vaporization heat  D. Condensation heat

Description : What refers to the amount of energy absorbed or released during a phase-change process?  A. Molar heat  B. Latent heat  C. Vaporization heat  D. Condensation heat

Last Answer : Latent heat

What is the heat capacity of one gram of a substance?  A. Molecular heat  B. Specific heat  C. Latent heat  D. Molar heat

Description : What is the heat capacity of one gram of a substance?  A. Molecular heat  B. Specific heat  C. Latent heat  D. Molar heat

Last Answer : Specific heat

What is the heat capacity of one mole of substance?  A. Molecular heat  B. Specific heat  C. Latent heat  D. Molar heat

Description : What is the heat capacity of one mole of substance?  A. Molecular heat  B. Specific heat  C. Latent heat  D. Molar heat

Last Answer : Molar heat

What refers to the amount of heat needed to raise the temperature of an object by one degree Celsius or 1K?  A. Heat capacity  B. Specific heat  C. Latent heat  D. Molar heat

Description : What refers to the amount of heat needed to raise the temperature of an object by one degree Celsius or 1K?  A. Heat capacity  B. Specific heat  C. Latent heat  D. Molar heat

Last Answer : Heat capacity

What are the only two forms of energy interactions associated with a closed system?  A. Kinetic energy and heat  B. Heat transfer and work  C. Thermal energy and chemical energy  D. Latent energy and thermal energy

Description : What are the only two forms of energy interactions associated with a closed system?  A. Kinetic energy and heat  B. Heat transfer and work  C. Thermal energy and chemical energy  D. Latent energy and thermal energy

Last Answer : Heat transfer and work

The flow energy of 5 ft3 of a fluid passing a boundary to a system is 80,000 ft-lb. Determine the pressure at this point.  a. 222 psi  b. 333 psi  c. 444 psi  d. 111 psi formula: Ef= pV

Description : The flow energy of 5 ft3 of a fluid passing a boundary to a system is 80,000 ft-lb. Determine the pressure at this point.  a. 222 psi  b. 333 psi  c. 444 psi  d. 111 psi formula: Ef= pV

Last Answer : 111 psi

An automobile tire has a gauge pressure of 200 kpa at 0°C assuming no air leaks and no change of volume of the tire, what is the gauge pressure at 35ºC.  a. 298.645  b. 398.109  c. 291.167  d. 281.333 Pg = Pabs - Patm

Description : An automobile tire has a gauge pressure of 200 kpa at 0°C assuming no air leaks and no change of volume of the tire, what is the gauge pressure at 35ºC.  a. 298.645  b. 398.109  c. 291.167  d. 281.333 Pg = Pabs - Patm

Last Answer : 298.645

The value of 1 mm of Hg is equal to  A. 1.333 N/m2  B. 13.33 N/m2  C. 133.3 N/m2  D. 1333 N/m2

Description : The value of 1 mm of Hg is equal to  A. 1.333 N/m2  B. 13.33 N/m2  C. 133.3 N/m2  D. 1333 N/m2

Last Answer : Answer: C

Which is NOT a correct statement?  A. A superheated vapor will not condense when small amount of heat re removed  B. An ideal gas is a gas that is not a superheated vapor  C. A saturated liquid can absorb as much heat as it can without vaporizing  D. Water at 1 atm and room temperature is subcooled

Description : Which is NOT a correct statement?  A. A superheated vapor will not condense when small amount of heat re removed  B. An ideal gas is a gas that is not a superheated vapor  C. A saturated ... absorb as much heat as it can without vaporizing  D. Water at 1 atm and room temperature is subcooled

Last Answer : An ideal gas is a gas that is not a superheated vapor

It is desired to concentrate a 20% salt solution (20 kg of salt in 100 kg of solution) to a 30% salt solution in an evaporator. Consider a feed of 300 kg/min at 30°C. The boiling point of the solution is 110°C, the latent heat of vaporisation is 2100 kJ/kg and the specific heat of the solution is 4 kJ/kg.K. The rate at which the heat has to be supplied in (kJ/min) to the evaporator is (A) 3.06 × 10 5 (B) 6.12 × 10 5 (C) 7.24 × 10 5 (D) 9.08 × 10

Description : It is desired to concentrate a 20% salt solution (20 kg of salt in 100 kg of solution) to a 30% salt solution in an evaporator. Consider a feed of 300 kg/min at 30°C. The boiling point of the solution is 110°C, the latent heat of ... 3.06 10 5 (B) 6.12 10 5 (C) 7.24 10 5 (D) 9.08 10

Last Answer : (A) 3.06 × 10

What is the amount of heat needed to turn 1kg of the substance at its boiling point from the liquid to the gaseous state?  A. Heat of fusion  B. Heat of vaporation  C. Heat of condensation  D. Heat of fission

Description : What is the amount of heat needed to turn 1kg of the substance at its boiling point from the liquid to the gaseous state?  A. Heat of fusion  B. Heat of vaporation  C. Heat of condensation  D. Heat of fission

Last Answer : Heat of vaporation

Utilizing the answer to the previous problem, estimate the overall or average increase in temperature ( ΔT) of the concrete roof from the energy absorbed from the sun during a12hour day. Assume that all of the radiation absorbed goes into heating the roof. The specific heat of concrete is about 900 J/kg, and the density is about 2,300 kg/m3 .  a. 7.9 °C  b. 8.9°C  c. 9.9°C  d. 10.9°C formula: ΔQ = m c ΔT

Description : Utilizing the answer to the previous problem, estimate the overall or average increase in temperature ( ΔT) of the concrete roof from the energy absorbed from the sun during a12hour day. Assume that all of the radiation absorbed goes into ... °C  b. 8.9°C  c. 9.9°C  d. 10.9°C formula: ΔQ = m c ΔT

Last Answer : 7.9 °C

A perfect gas has a value of R= 319.2 J/ kf.K and k= 1.26. If 120 kJ are added to 2.27 kf\g of this gas at constant pressure when the initial temp is 32.2°C? Find T2.  a. 339.4 K  b. 449.4 K  c. 559.4K  d. 669.4K formula: cp = kR/ k-1 Q= mcp(T2-T1)

Description : A perfect gas has a value of R= 319.2 J/ kf.K and k= 1.26. If 120 kJ are added to 2.27 kf\g of this gas at constant pressure when the initial temp is 32.2°C? Find T2.  a. 339.4 K  b. 449.4 K  c. 559.4K  d. 669.4K formula: cp = kR/ k-1 Q= mcp(T2-T1)

Last Answer : 339.4 K

Gas is enclosed in a cylinder with a weighted piston as the stop boundary. The gas is heated and expands from a volume of 0.04 m^3 to 0.10 m^3 at a constant pressure of 200kPa.Calculate the work done by the system.  A. 8 kJ  B. 10 kJ  C.12 kJ  D.14 kJ Formula: W = p(V2-V1)

Description : Gas is enclosed in a cylinder with a weighted piston as the stop boundary. The gas is heated and expands from a volume of 0.04 m^3 to 0.10 m^3 at a constant pressure of 200kPa.Calculate the work done by the system.  A. 8 kJ  B. 10 kJ  C.12 kJ  D.14 kJ Formula: W = p(V2-V1)

Last Answer : 12 kJ

The flow energy of 150 L of a fluid passing a boundary to a system is 110 kJ. Determine the pressure at this point  a. 733.33 kPa  b. 833.33 kPa  c. 933.33 kPa  d. 633.33 kPa

Description : The flow energy of 150 L of a fluid passing a boundary to a system is 110 kJ. Determine the pressure at this point  a. 733.33 kPa  b. 833.33 kPa  c. 933.33 kPa  d. 633.33 kPa

Last Answer : 733.33 kPa

A gas is enclosed in a cylinder with a weighted piston as the top boundary. The gas is heated and expands from a volume of 0.04 m3 to 0.10 m3 at a constant pressure of 200 kPa. Find the work done on the system.  a. 5 kJ  b. 15 kJ  c. 10 kJ  d. 12 kJ

Description : A gas is enclosed in a cylinder with a weighted piston as the top boundary. The gas is heated and expands from a volume of 0.04 m3 to 0.10 m3 at a constant pressure of 200 kPa. Find the work done on the system.  a. 5 kJ  b. 15 kJ  c. 10 kJ  d. 12 kJ

Last Answer : 12 kJ

What is the value of the universal gas constant in kJ/kmol K? ∙  A. 10.73  B. 1.986  C. 8.314  D. 1545

Description : What is the value of the universal gas constant in kJ/kmol K? ∙  A. 10.73  B. 1.986  C. 8.314  D. 1545

Last Answer : 8.314

What is the extremely large amount of energy associated with the strong bonds within the nucleus of the atom itself called?  A. Chemical energy  B. Latent energy  C. Phase energy  D. Nuclear energy

Description : What is the extremely large amount of energy associated with the strong bonds within the nucleus of the atom itself called?  A. Chemical energy  B. Latent energy  C. Phase energy  D. Nuclear energy

Last Answer : Nuclear energy

What is the internal energy associated with the atomic bonds in a molecule called?  A. Chemical energy  B. Latent energy  C. Phase energy  D. State energy

Description : What is the internal energy associated with the atomic bonds in a molecule called?  A. Chemical energy  B. Latent energy  C. Phase energy  D. State energy

Last Answer : Chemical energy

What is the internal energy associated with the phase of a system called?  A. Chemical energy  B. Latent energy  C. Phase energy  D. Thermal energy

Description : What is the internal energy associated with the phase of a system called?  A. Chemical energy  B. Latent energy  C. Phase energy  D. Thermal energy

Last Answer : Latent energy

A cylinder contains oxygen at a pressure of 10 atm and a temperature of 300 K. The volume of the cylinder is 10 liters. What is the mass of the oxygen in grams? Molecular weight (MW) of oxygen is 32 g/mole?  a. 125.02  b. 130.08  c. 135.05  d. 120.04

Description : A cylinder contains oxygen at a pressure of 10 atm and a temperature of 300 K. The volume of the cylinder is 10 liters. What is the mass of the oxygen in grams? Molecular weight (MW) of oxygen is 32 g/mole?  a. 125.02  b. 130.08  c. 135.05  d. 120.04

Last Answer : 130.08 {(10atm)(10)(32)/(0.0821) (300K)}