Description : What is the amount of heat needed to turn 1kg of the substance at its boiling point from the liquid to the gaseous state? A. Heat of fusion B. Heat of vaporation C. Heat of condensation D. Heat of fission
Last Answer : Heat of vaporation
Description : What is defined as the direct conversion of a substance from the solid to the vapor state or vice versa without passing the liquid state? A. Condensation B. Vaporization C. Sublimation D. Cryogenation
Last Answer : Sublimation
Description : The heat absorbed by a unit mass of a material at its holding point in order to convert the material into a gas at the same temperature. a. Latent Heat of Sublimation b. Latent Heat of Vaporization c. Latent Heat of Fusion d. Latent Heat Of Condensation
Last Answer : Latent Heat of Vaporization
Description : The ______ of a substance is the amount of heat that must be added or removed from a unit mass of the substance to change its temperature by one degree. A. Latent heat of fusion B. Molar heat C. Specific heat capacity D. Specific heat
Last Answer : Specific heat capacity
Description : The changing of solid directly to vapor without passing through liquid state is called a. Evaporation b. Vaporization c. Sublimation d. Condensation
Description : Amount of heat needed to rate the temperature of a substance by 1°C a. Heat Exchange b. Heat Engine c. Specific Heat d. None of the above
Last Answer : Specific Heat
Description : The phase transition of a liquid to a solid a. Solidification b. Freezing c. Fusion d. All of these
Last Answer : All of these
Description : Heat which causes a change in temperature of a substance. a. Latent heat b. Sensible heat c. Specific heat d. Heat of Fusion
Last Answer : Sensible heat
Description : What is defined as the energy required to raise the temperature of a unit mass of a substance by one degree? A. Latent heat of fusion B. Molar heat C. Specific heat capacity D. Specific heat
Last Answer : Specific heat
Description : What is the latent heat of fusion of water at 1 atm? A. 331.1 kJ/kg B. 332.6 kJ/kg C. 333.7 kJ/kg D. 330.7 kJ/kg
Last Answer : 333.7 kJ/kg
Description : The phenomenon of melting under pressure and freezing again when the pressure is reduced is known as a. sublimation b. condensation c. deposition d. regelation
Last Answer : regelation
Description : What refers to the amount of energy absorbed or released during a phase-change process? A. Molar heat B. Latent heat C. Vaporization heat D. Condensation heat
Last Answer : Latent heat
Description : _________ is the transition of a given substance from the solid to the gas phase with no intermediate liquid stage. a. Convection b. Conduction c. Radiation d. Sublimation
Description : The pressure of the vapor phase of a substance that is in equilibrium with the liquid or solid phase. a. Phase Pressure b. Equilibrium Vapor Pressure c. Specific Pressure d. Equilibrium Phase Pressure
Last Answer : Equilibrium Vapor Pressure
Description : When a solid melts, a. the temperature of the substance increases. b. the temperature of the substance decreases. c. heat leaves the substance. d. heat enters the substance.
Last Answer : heat enters the substance.
Description : _____ is that property of a substance which remains constant if no heat enters or leaves the substance, while it does work or alters its volume, but which increases or diminishes should a small amount of heat enter or leave. a. Entrophy b. Enthalpy c. Specific Heat d. None of the above
Last Answer : Entrophy
Description : What is the unique state at which solid, liquid and gaseous phase can go co-exist in equilibrium? a. Triple point b. Critical point c. Boiling point d. Pour point
Last Answer : Triple point
Description : What refers to the amount of heat needed to raise the temperature of an object by one degree Celsius or 1K? A. Heat capacity B. Specific heat C. Latent heat D. Molar heat
Last Answer : Heat capacity
Description : The amount of heat energy per kilogram that must be added or removed when a substance changes from one phase to another. a. specific heat b. heat of expansion c. latent heat d. useful heat
Last Answer : latent heat
Description : The specific heat at constant volume is A. the amount of heat required to raise the temperature of unit mass of gas through one degree, at constant pressure B. the amount of heat required to raise ... to raise the temperature of 1 kg of water through one degree D. any one of the above
Last Answer : Answer: B
Description : Which of the following statement is incorrect? A. The liquid fuels consist of hydrocarbons. B. The liquid fuels have higher calorific value than solid fuels. C. The solid fuels have higher calorific value than liquid fuels. D. A good fuel should have low ignition point.
Last Answer : Answer: C
Description : Which of the following cannot be measured by a thermometer? a. Latent Heat b. Sensible Heat c. Specific Heat d. Heat of Fusion
Last Answer : Latent Heat
Description : Which is NOT a correct statement? A. A superheated vapor will not condense when small amount of heat re removed B. An ideal gas is a gas that is not a superheated vapor C. A saturated ... absorb as much heat as it can without vaporizing D. Water at 1 atm and room temperature is subcooled
Last Answer : An ideal gas is a gas that is not a superheated vapor
Description : What term refers to the heat needed to change a unit mass of a substance at its melting temperature from a solid into a liquid?
Last Answer : ANSWER: HEAT OF FUSION or LATENT HEAT OF FUSION or ENTHALPY OF FUSION
Description : A vessel with a volume of cubic meter contains liquid water and water vapor ion equilibrium at 600 kPa. The liquid water has mass of1kg. Using the steam table, calculate the mass of the water vapor. A. 0.99kg B. 1.57 kg C ... / kg vg = 0.3157 m^3 / kg Vtot = mƒ vƒ + mg vg mg = (tot-mƒ vƒ) / vg
Last Answer : 3.16 kg
Description : A 10m^3 vessel initially contains 5 m^3 of liquid water and 5 m^3 of saturated water vapor at 100 kPa. Calculate the internal energy of the system using the steam table. A. 5 x10^5 kJ B. 8x10^5 kJ C. 1 ... 3 kJ/kg ug= 2506kJ/kg formula: Mvap = V vap/vg M liq = Vliq/ vƒ u =uƒM liq + ug M vap
Last Answer : 2 x10^6 kJ
Description : Mixture of liquid and steam of the same substance in which both are at saturation temperature. a. dry steam b. current steam c. wet steam d. aerosol
Last Answer : wet steam
Description : Fuels that may classified conveniently in solid, liquid and gaseous. a. Unleaded fuel b. Diesel fuel c. Fossil fuel d. All of the above
Last Answer : Fossil fuel
Description : The energy associated with individual molecules in a gas, liquid or solid. a. Specific Energy b. Molecular Energy c. Internal Energy d. Phase Energy
Last Answer : Internal Energy
Description : Liquid fuels have higher calorific value than solid fuels. A. Yes B. No
Last Answer : Answer: A
Description : Liquid fuels have lower efficiency than solid fuels. A. True B. False
Description : What refers to the thermodynamic properties which are independent on the amount of the substance present? a. Extensive property b. Intensive properties c. Reversible properties d. Irreversible properties
Last Answer : Intensive properties
Description : What refers to the thermodynamic properties which are dependent on the amount of the substance present? a. Extensive property b. Intensive properties c. Reversible properties d. Irreversible properties
Last Answer : Extensive property
Description : Is the amount of a substance that contains Avogadro’s number of atoms/molecules. a. mass b. matter c. gram-mole d. volume
Last Answer : gram-mole
Description : What refers to the heat needed to change the temperature of the substances without changing its phases? a. Latent heat b. Sensible heat c. Specific heat d. entropy
Description : What is defined as the quantity of heat needed to raise the temperature of one kilogram of water by one degrees Celsius? a. Kilojoule b. Btu c. Kilocalorie d. Latent heat
Last Answer : Kilocalorie
Description : Entropy is the measure of: a. The internal energy of a gas b. The heat capacity of a substance c. Randomness or disorder d. The change of enthalpy of a system
Last Answer : Randomness or disorder
Description : Specific heat capacity in SI unit. a. kJ / kg.k b. kJ / kg c. kN / kg d. None of the above
Last Answer : kJ / kg.k
Description : The ratio of the weight of a substance to the weight of some standard substance is called? a. Specific Heat b. Specific Gravity c. Isothermal d. Specific Weight
Last Answer : Specific Gravity
Description : Sum of the internal energy of a substance and the product of pressure and volume. a. Specific Heat b. Specific Gravity c. Isolated System d. Enthalpy
Last Answer : Enthalpy
Description : A 1-kg steam-water mixture at 1.0 MPa is contained in an inflexible tank. Heat is added until the pressure rises to 3.5 MPa and the temperature to 400°. Determine the heat added. a) 1378.7 kJ b) 1348.5 kJ c) 1278,7 kJ d) 1246,5 kJ Formula: Q = (h2 – p2v2) –(h1 –p1v1)
Last Answer : 1378.7 kJ
Description : Utilizing the answer to the previous problem, estimate the overall or average increase in temperature ( ΔT) of the concrete roof from the energy absorbed from the sun during a12hour day. Assume that all of the radiation absorbed goes into ... °C b. 8.9°C c. 9.9°C d. 10.9°C formula: ΔQ = m c ΔT
Last Answer : 7.9 °C
Description : There are 1.36 kg of gas, for which R = 377 J/kg.k and k = 1.25, that undergo a nonflow constant volume process from p1 = 551.6 kPa and t1 = 60°C to p2 = 1655 kPa. During the process the gas is internally stirred and ... (Formula: T2= T1p2/ p1) a. 999 K b. 888 K c. 456 K d. One of the above
Last Answer : 999 K
Description : Water (specific heat cv= 4.2 kJ/ kg ∙ K ) is being heated by a 1500 W h eater. What is the rate of change in temperature of 1kg of the water? A. 0.043 K/s B. 0.179 K/s C. 0.357 K/s D. 1.50 K/s Formula: Q = mcv ( T)
Last Answer : 0.179 K/s
Description : From the steam table, determine the average constant pressure specific heat (c) of steam at 10 kPa and45.8 ˚C A.1.79 kJ/ kg-˚C B.10.28 kJ/ kg-˚C C.30.57 kJ/ kg-˚C D. 100.1 kJ/ kg-˚C Formula: h = c T ∆ ∆ From the steam table At 47.7 ˚C h= 2588.1 kJ/ kg At 43.8 ˚C h= 2581.1 kJ/ kg
Last Answer : 1.79 kJ/ kg-˚C
Description : _________ is a measure of the average kinetic energy per molecule in a substance. a. movement b. temperature c. heat d. mass
Last Answer : temperature
Description : The heat Q per unit mass per degree change in temperature that must be supplied or removed to change the temperature of a substance. a. Specific Heat Capacity b. Latent Heat c. Heat of Transformation d. Internal Heat
Last Answer : Specific Heat Capacity
Description : What is the SI unit of specific heat capacity? A. J/kg B. J/kg °F ∙ C. J/kg °C ∙ D. J/°C
Last Answer : J/kg °C
Description : What is the specific heat capacity of water in J/kg °C? ∙ A. 4581 B. 4185 C. 4518 D. 4815
Last Answer : 4185
Description : What is the latent heat of vaporization of water at 1 atm? A. 2314.8 kJ/kg B. 2257.1 kJ/kg C. 2511.7 kJ/kg D. 2429.8 kJ/kg
Last Answer : 2257.1 kJ/kg