Description : The temperature at which the vapor pressure exactly equals one atm is called _________. a. boiling temperature b. normal boiling point c. triple point d. point of infliction
Last Answer : normal boiling point
Description : Extensive property of a system is one whose value (a) depends on the mass of the system like volume (b) does not depend on the mass of the system, like temperature, pressure, etc. (c) is not ... the state (d) is dependent on the path followed and not on the state (e) is always constant.
Last Answer : Answer : a
Description : Intensive property of a system is one whose value (a) depends on the mass of the system, like volume (b) does not depend on the mass of the system, like temperature, pressure, etc. (c) is not ... on the state (d) is dependent on the path followed and not on the state (e) remains constant.
Last Answer : Answer : b
Description : Adiabatic heating and Adiabatic cooling really means _________ and _________ respectively. a. raising the temp and lowering the temp b. maintaining the pressure and changing the temperature c. decreasing the volume and increasing the pressure d. lowering the temp and raising the temp
Last Answer : raising the temp and lowering the temp
Description : The gas in a constant gas thermometer cooled to absolute zero would have _________. a. no volume b. no pressure c. zero temperature at all scales d. none of the above
Last Answer : no pressure
Description : Vapor pressure depends only on _________. a. pressure b. force c. volume d. temperature
Last Answer : temperature
Description : Addition of heat at constant pressure to a gas results in (a) raising its temperature (b) raising its pressure (c) raising its volume (d) raising its temperature and doing external work (e) doing external work.
Last Answer : Answer : d
Description : The boiling of water into steam in an open container is an example of a/an _________ process. a. adiabatic b. isochoric c. isobaric d. zero work
Last Answer : isobaric
Description : The volume of a confined gas is held constant, the pressure is directly proportional to the absolute temperature. a. Charle’s Law b. Boyle’s Law c. Joule’s Law d. Specific Heat
Last Answer : Boyle’s Law
Description : The heat supplied to the gaS at constant volume is (where m = Mass of gas, cv = Specific heat at constant volume, cp = Specific heat at constant pressure, T2 – T1 = Rise in temperature, and R = Gas constant) A. mR(T2 – T1) B. mcv(T2 – T1) C. mcp(T2 – T1) D. mcp(T2 + T1)
Last Answer : Answer: B
Description : The specific heat at constant volume is A. the amount of heat required to raise the temperature of unit mass of gas through one degree, at constant pressure B. the amount of heat required to raise ... to raise the temperature of 1 kg of water through one degree D. any one of the above
Description : The amount of heat required to raise the temperature of the unit mass of gas through one degree at constant volume, is called A.specific heat at constant volume B.specific heat at constant pressure C.kilo Joule D.none of these
Last Answer : Answer: A
Description : In a Carnot cycle, heat is transferred at (a) constant pressure (b) constant volume (c) constant temperature (d) constant enthaply (e) any one of the above.
Last Answer : Answer : c
Description : Change in internal energy in a closed system is equal to heat transferred if the reversible process takes place at constant (a) pressure (b) temperature (c) volume (d) internal energy (e) entropy.
Description : Change in enthalpy in a closed system is equal to heat transferred if the reversible process takes place at constant (a) pressure (b) temperature (c) volume (d) internal energy (e) entropy.
Description : Entropy change depends on (a) heat transfer (b) mass transfer (c) change of temperature (d) thermodynamic state (e) change of pressure and volume.
Description : Change in enthalpy of a system is the heat supplied at (a) constant pressure (b) constant temperature (c) constant volume (d) constant entropy (e) N.T.P. condition.
Description : Which of the following is not the intensive property (a) pressure (b) temperature (c) density (d) heat (e) specific volume.
Description : Which of the following quantities is not the property of the system (a) pressure (b) temperature (c) specific volume (d) heat (e) density.
Description : According to Avogadro's Hypothesis (a) the molecular weights of all the perfect gases occupy the same volume under same conditions of pressure and temperature (b) the sum of partial pressure of ... gases have two values of specific heat (e) all systems can be regarded as closed systems.
Description : According to kinetic theory of gases, the absolute zero temperature is attained when (a) volume of the gas is zero (b) pressure of the gas is zero (c) kinetic energy of the molecules is zero (d) specific heat of gas is zero (e) mass is zero.
Description : The volume of a given amount of water _________ as the temperature decreases from 4˚C to 0˚C. a. decreases b. increases c. remains constant d. none of the above
Last Answer : increases
Description : __________________ represents the highest pressure and highest temperature at which liquid and vapor can coexist in equilibrium. a) Critical Point b) Boiling Point c) Quality Point d) None of the above
Last Answer : Critical Point
Description : __________________ is a liquid at the saturations which has temperature equal to the boiling point corresponding to the existing pressure. a. Saturation Temperature b. Sub cooled Liquid c. Compressed Liquid d. Saturated Liquid
Last Answer : Saturated Liquid
Description : _________ is the quantity of heat required to raise the temperature of one pound of water 1 F˚ from 63 ˚F to 64 ˚F. a. one Joule b. one calorie c. one watt d. one BTU
Last Answer : one BTU
Description : _________ is a measure of the average kinetic energy per molecule in a substance. a. movement b. temperature c. heat d. mass
Description : What is the amount of heat needed to turn 1kg of the substance at its boiling point from the liquid to the gaseous state? A. Heat of fusion B. Heat of vaporation C. Heat of condensation D. Heat of fission
Last Answer : Heat of vaporation
Description : _________ is the temperature to which the air must be cooled, at constant pressure, to produce saturation. a. relative humidity b. triple point temperature c. dew point d. critical point
Last Answer : dew point
Description : As we heat a gas at constant pressure, its volume a. increases b. decreases c. stays the same d. none of the above
Description : Is the force of gravity on unit volume? a. Specific Weight b. Specific Heat c. Specific Pressure d. Specific Volume
Last Answer : Specific Weight
Description : Is a steady flow process at total constant pressure through a control volume for which there is no heat? a. Adiabatic Saturation Process b. Dew point c. Adiabatic Ratio d. None of the above
Last Answer : Adiabatic Saturation Process
Description : Sum of the internal energy of a substance and the product of pressure and volume. a. Specific Heat b. Specific Gravity c. Isolated System d. Enthalpy
Last Answer : Enthalpy
Description : The value of specific heat at constant pressure (cp) is __________ that of at constant volume (cv). A. less than B. equal to C. more than
Last Answer : Answer: C
Description : The ratio of specific heat at constant pressure (Cp) and specific heat at constant volume (cv) is A. equal to one B. less than one C. greater than one D. none of these
Description : Universal gas constant is defined as equal to product of the molecular weight of the gas and (a) specific heat at constant pressure (b) specific heat at constant volume (c) ratio of two specific heats (d) gas constant (e) unity.
Description : A heat exchange process in which the product of pressure and volume remains constant is known as (a) heat exchange process (b) throttling process (c) isentropic process (d) adiabatic process (e) hyperbolic process.
Last Answer : Answer : e
Description : Open system is also known as _________. a. isolated system b. closed container c. control mass d. control volume
Last Answer : control volume
Description : A closed system is also known as _________. a. isolated system b. closed container c. control mass d. control volume
Last Answer : control mass
Description : For most solids, the coefficient of volume expansion is _________ the coefficient of linear expansion. a. unrelated to b. proportional to c. twice d. three times
Last Answer : three times
Description : What is the area under the curve on a temperature –entropy diagram? a. Heat b. work c. entropy d. volume
Last Answer : Heat
Description : Otto cycle efficiency is higher than Diesel cycle efficiency for the same compression ratio and heat input because in Otto cycle A. combustion is at constant volume B. expansion and compression are isentropic C. maximum temperature is higher D. heat rejection is lower
Last Answer : Answer: D
Description : During adiabatic, internally reversible process, what is true about the change in entropy? A. It is temperature-dependent B. It is always greater than zero C. It is always zero D. It is always less than zero
Last Answer : It is always zero
Description : The heat absorbed by a unit mass of a material at its holding point in order to convert the material into a gas at the same temperature. a. Latent Heat of Sublimation b. Latent Heat of Vaporization c. Latent Heat of Fusion d. Latent Heat Of Condensation
Last Answer : Latent Heat of Vaporization
Description : Thermodynamics is the study of heat and its transformation which stems from Greek words meaning _________. a. transformation of heat b. transformation of energy c. movement of heat d. movement of matter
Last Answer : movement of heat
Description : If the initial volume of an ideal gas is compressed to one-half its original volume and to twice its original temperature, the pressure: a. doubles b. halves c. quadruples d. triples
Last Answer : quadruples
Description : What Law states that the pressure of gas is inversely proportional to its volume at constant temperature? a. Charles’ law b. Gay-Lussac’s Law c. Boyle’s Law d. Dalton’s Law
Description : The volume of an ideal gas is directly proportional to its a. pressure b. Celsius temperature c. Kelvin temperature d. Fahrenheit temperature
Last Answer : Kelvin temperature
Description : What gas thermometer is based on the principle that at low pressure, the temperature of a gas is proportional to its pressure at constant volume? A. Constant-pressure gas thermometer B. Isobaric gas thermometer C. Isometric gas thermometer D. Constant-volume gas thermometer
Last Answer : Constant-volume gas thermometer
Description : The absolute pressure of a given mass of a perfect gas varies inversely as its volume, when the temperature remains constant. This statement is known as Charles’ law. A. Yes B. No
Description : According to Gay-Lussac law, the absolute pressure of a given mass of a perfect gas varies __________ as its absolute temperature, when the volume remains constant. A. directly B. indirectly