Description : Occurs when the vapor pressure equals the atmospheric pressure a. Boiling b. Melting c. Freezing d. Vaporizing
Last Answer : Boiling
Description : __________________ represents the highest pressure and highest temperature at which liquid and vapor can coexist in equilibrium. a) Critical Point b) Boiling Point c) Quality Point d) None of the above
Last Answer : Critical Point
Description : _________ is the temperature to which the air must be cooled, at constant pressure, to produce saturation. a. relative humidity b. triple point temperature c. dew point d. critical point
Last Answer : dew point
Description : Which is NOT a correct statement? A. A superheated vapor will not condense when small amount of heat re removed B. An ideal gas is a gas that is not a superheated vapor C. A saturated ... absorb as much heat as it can without vaporizing D. Water at 1 atm and room temperature is subcooled
Last Answer : An ideal gas is a gas that is not a superheated vapor
Description : Water boils when: A. Its saturated vapor pressure equals to the atmospheric pressure B. Its vapor pressure equals 76cm of mercury C. Its temperature reaches 212 degree Celsius D. Its vapor pressure is 1 gram per sq. cm
Last Answer : Its saturated vapor pressure equals to the atmospheric pressure
Description : What refers to the point at which the saturated liquid and saturated vapor states are the same or identical? A. Triple point B. Inflection point C. Maximum point D. Critical point
Last Answer : Maximum point
Description : Vapor pressure depends only on _________. a. pressure b. force c. volume d. temperature
Last Answer : temperature
Description : What refers to the state at which liquid and gaseous phases are indistinguishable? a. Triple point b. Critical point c. Boiling point d. Pour point
Last Answer : Critical point
Description : What is the unique state at which solid, liquid and gaseous phase can go co-exist in equilibrium? a. Triple point b. Critical point c. Boiling point d. Pour point
Last Answer : Triple point
Description : Boiling temperature of a material is dependent on its _________. a. volume b. power c. heat d. pressure
Last Answer : pressure
Description : What is the temperature when water and vapor are in equilibrium with the atmospheric pressure? a. Ice point b. Steam point c. Critical point d. Freezing point
Last Answer : Steam point
Description : At steam point, the temperature of water and its vapor at standard pressure are: a. Extremes or maximum b. unity c. in equilibrium d. undefined
Last Answer : in equilibrium
Description : What is the temperature when water and vapor are in the equilibrium with the atmospheric pressure? a. Ice point b. Steam point c. Critical point d. Freezing point
Description : A cylinder contains oxygen at a pressure of 10 atm and a temperature of 300 K. The volume of the cylinder is 10 liters. What is the mass of the oxygen in grams? Molecular weight (MW) of oxygen is 32 g/mole? a. 125.02 b. 130.08 c. 135.05 d. 120.04
Last Answer : 130.08 {(10atm)(10)(32)/(0.0821) (300K)}
Description : __________________ is a liquid at the saturations which has temperature equal to the boiling point corresponding to the existing pressure. a. Saturation Temperature b. Sub cooled Liquid c. Compressed Liquid d. Saturated Liquid
Last Answer : Saturated Liquid
Description : What temperature scale is identical to the Kelvin scale? A. Ideal gas temperature scale B. Ideal temperature scale C. Absolute gas temperature scale D. Triple point temperature scale
Last Answer : Ideal gas temperature scale
Description : A 0.064 kg of octane vapor (MW = 114) is mixed with0.91 kg of air (MW = 29.0) in the manifold of an Engine. The total pressure in the manifold is 86.1 kPa, and a temperature is 290 K. assume octane behaves ideally. What is ... of the air in the mixture in KPa? a. 46.8 b. 48.6 c. 84.6 d. 64.8
Last Answer : 84.6
Description : _____________ is the difference between the actual temperature of superheated vapor and the saturation temperature for the existing pressure. a) Degrees of Superheat, °SH b) Degrees of Sub cooled, °SB c) Both a and b d) None of the above
Last Answer : Degrees of Superheat, °SH
Description : __________________ is a vapor having a temperature higher than the saturation temperature corresponding to the existing pressure. a) Vapor b) Saturated Vapor c) Superheated Vapor d) Wet Vapor
Last Answer : Superheated Vapor
Description : ___________________ is a vapor at the saturation conditions (saturation temperature and saturation pressure). a) Vapor b) Saturated Vapor c) Superheated Vapor d) Wet Vapor
Last Answer : Saturated Vapor
Description : On a day when the partial pressure of water vapor remains constant, what happens as the temperature rises? a. the relative humidity increases b. the relative humidity decreases c. the relative humidity remains constant d. the air would eventually become saturated
Last Answer : the relative humidity decreases
Description : _________is the partial pressure of water vapor at the existing temperature divided by the equilibrium vapor pressure of water at the existing temperature. a. vacuum pressure b. relative humidity c. absolute pressure d. vapor pressure
Last Answer : relative humidity
Description : Is define as the ratio of the actual pressure of the vapor a. Relative Humidity b. Humidity Ratio c. Dew Point d. Adiabatic Saturation
Last Answer : Relative Humidity
Description : The boiling of water into steam in an open container is an example of a/an _________ process. a. adiabatic b. isochoric c. isobaric d. zero work
Last Answer : isobaric
Description : The standard reference atmospheric pressure a. 760 mmHg b. 1 atm c. 14.696 psia d. All of the above
Last Answer : All of the above
Description : What is the SI unit of pressure? A. Atm B. Bar C. Pa D. Psi
Last Answer : Pa
Description : Which of the following is NOT a value of the standard atmospheric pressure? A. 1 bar B. 1 atm C. 1 kgf/cm^2 D. 14.223 psi
Last Answer : 14.223 psi
Description : What is the state at which all three phases of water coexist in equilibrium? A. Tripoint of water B. Triple point of water C. Triple phase point of water D. Phase point of water
Last Answer : Triple point of water
Description : The pressure of the vapor phase of a substance that is in equilibrium with the liquid or solid phase. a. Phase Pressure b. Equilibrium Vapor Pressure c. Specific Pressure d. Equilibrium Phase Pressure
Last Answer : Equilibrium Vapor Pressure
Description : Adiabatic heating and Adiabatic cooling really means _________ and _________ respectively. a. raising the temp and lowering the temp b. maintaining the pressure and changing the temperature c. decreasing the volume and increasing the pressure d. lowering the temp and raising the temp
Last Answer : raising the temp and lowering the temp
Description : The gas in a constant gas thermometer cooled to absolute zero would have _________. a. no volume b. no pressure c. zero temperature at all scales d. none of the above
Last Answer : no pressure
Description : If any external pressure is applied to a confined fluid, the pressure will be increased at every point in the fluid by the amount of the external pressure is known as _________. a. Torricelli’s law b. Barometric law c. Newton’s Second law d. Pascal’s law
Last Answer : Pascal’s law
Description : _________ the very small KE still present in molecules at absolute zero temperature. a. internal KE b. Atomic kinetic energy c. Zero-Point Energy d. Subliminal Energy
Last Answer : Zero-Point Energy
Description : The distillation carried out in such a way that the liquid with the lowest boiling point is first evaporated and recondensed, then the liquid with the next higher boiling point is then evaporated and ... is called A. cracking B. carbonisation C. fractional distillation D. full distillation
Last Answer : Answer: C
Description : 5 atm = ____mmHg a. 8300 b. 3800 c. 3080 d. None of the above
Last Answer : 3800
Description : What is the latent heat of vaporization of water at 1 atm? A. 2314.8 kJ/kg B. 2257.1 kJ/kg C. 2511.7 kJ/kg D. 2429.8 kJ/kg
Last Answer : 2257.1 kJ/kg
Description : What is the latent heat of fusion of water at 1 atm? A. 331.1 kJ/kg B. 332.6 kJ/kg C. 333.7 kJ/kg D. 330.7 kJ/kg
Last Answer : 333.7 kJ/kg
Description : 1 atm is equivalent to how many pascals? A. 101,325 B. 101,689 C. 101,102 D. 101,812
Last Answer : 101,325
Description : What is the amount of heat needed to turn 1kg of the substance at its boiling point from the liquid to the gaseous state? A. Heat of fusion B. Heat of vaporation C. Heat of condensation D. Heat of fission
Last Answer : Heat of vaporation
Description : The changing of solid directly to vapor without passing through liquid state is called a. Evaporation b. Vaporization c. Sublimation d. Condensation
Last Answer : Sublimation
Description : The ratio of the mass of vapor to the total mass of the mixture is called ______. A. Vapor ratio B. Vapor content C. Vapor index D. Quality
Last Answer : Quality
Description : A vapor that is not about to condense is called _____ vapor. A. Saturated B. Compressed or subcooled C. Superheated D. Unsaturated
Last Answer : Superheated
Description : A vapor that is about to condense is called ______ vapor. A. Saturated B. Compressed or subcooled C. Superheated D. Unsaturated
Last Answer : Saturated
Description : Which of the following cycle is used in vapor cycle power plant? a. Brayton cycle b. Diesel cycle c. Ericson cycle d. Rankine cycle
Last Answer : Rankine cycle
Description : ___________ is the percent by weight that is saturated liquid. a) Quality, x b) Percent Moisture, y c) Vapor c) Liquid
Last Answer : Percent Moisture, y
Description : ___________ is the percent by weight that is saturated vapor. a) Quality, x b) Percent Moisture, y c) Vapor d) Liquid
Last Answer : Quality, x
Description : _________________ is a combination of saturated vapor and saturated liquid. a) Vapor b) Saturated Vapor c) Superheated Vapor d) Wet Vapor
Last Answer : Wet Vapor
Description : _________________ is the name given to a gaseous phase that is in contact with the liquid phase, or that is in the vicinity of a state where some of it might be condensed. a) Vapor b) Saturated Vapor c) Superheated Vapor d) Wet Vapor
Last Answer : Vapor
Description : Water vapor at 100 KPa and 150°C is compressed isothermally until half the vapor has condensed. How much work must be performed on the steam in this compression process per kilogram? a) -1384.7 kJ b) 1384.7 kJ c) -2384.7 kJ d) 2384.7 kJ
Last Answer : -1384.7 kJ
Description : A vessel with a volume of cubic meter contains liquid water and water vapor ion equilibrium at 600 kPa. The liquid water has mass of1kg. Using the steam table, calculate the mass of the water vapor. A. 0.99kg B. 1.57 kg C ... / kg vg = 0.3157 m^3 / kg Vtot = mƒ vƒ + mg vg mg = (tot-mƒ vƒ) / vg
Last Answer : 3.16 kg