The mechanical equivalent of heat is  a. joule  b. calorie  c. Btu  d. Specific heat

The mechanical equivalent of heat
is
 a. joule
 b. calorie
 c. Btu
 d. Specific heat
by

1 Answer

Answer :

joule
by

Related questions

_________ is the quantity of heat required to raise the temperature of one pound of water 1 F˚ from 63 ˚F to 64 ˚F.  a. one Joule  b. one calorie  c. one watt  d. one BTU

Description : _________ is the quantity of heat required to raise the temperature of one pound of water 1 F˚ from 63 ˚F to 64 ˚F.  a. one Joule  b. one calorie  c. one watt  d. one BTU

Last Answer : one BTU

The amount of heat required to raise the temperature of 1 pound of water by 1°F is called ______.  A. Calorie  B. Joule  C. BTU  D. Kilocalorie

Description : The amount of heat required to raise the temperature of 1 pound of water by 1°F is called ______.  A. Calorie  B. Joule  C. BTU  D. Kilocalorie

Last Answer : BTU

The amount of heat required to raise the temperature of 1kg of water through 1 °C is called ______.  A. Calorie  B. Joule  C. BTU  D. Kilocalorie

Description : The amount of heat required to raise the temperature of 1kg of water through 1 °C is called ______.  A. Calorie  B. Joule  C. BTU  D. Kilocalorie

Last Answer : Kilocalorie

What is the SI unit of energy?  A. Newton  B. Btu  C. Calorie  D. Joule

Description : What is the SI unit of energy?  A. Newton  B. Btu  C. Calorie  D. Joule

Last Answer : Joule

Two thick slices of bread, when completely oxidized by the body, can supply 200,000 cal of heat. How much work is this equivalent to?  a) 4,190,000 joules  b) 8,390,000 joules  c) 839,000 joules  d) 419 000 joules Formula: J =Work/Heat J = mechanical equivalent of heat whose value is 4.19 joules/calorie

Description : Two thick slices of bread, when completely oxidized by the body, can supply 200,000 cal of heat. How much work is this equivalent to?  a) 4,190,000 joules  b) 8,390,000 joules  c) 839, ... d) 419 000 joules Formula: J =Work/Heat J = mechanical equivalent of heat whose value is 4.19 joules/calorie

Last Answer : 419 000 joules

How many joules of work is the equivalent of 15000 cal of heat?  a) 62850 joules  b) 3579.95 joules  c) 14995.81 joules  d) 15004.19 joules Formula: J =Work/Heat J = mechanical equivalent of heat whose value is 4.19 joules/calorie

Description : How many joules of work is the equivalent of 15000 cal of heat?  a) 62850 joules  b) 3579.95 joules  c) 14995.81 joules  d) 15004.19 joules Formula: J =Work/Heat J = mechanical equivalent of heat whose value is 4.19 joules/calorie

Last Answer : 62850 joules

The amount of heat required to raise the temperature of the unit mass of gas through one degree at constant volume, is called  A.specific heat at constant volume  B.specific heat at constant pressure  C.kilo Joule  D.none of these

Description : The amount of heat required to raise the temperature of the unit mass of gas through one degree at constant volume, is called  A.specific heat at constant volume  B.specific heat at constant pressure  C.kilo Joule  D.none of these

Last Answer : Answer: A

Calorie is a measure of  (a) specific heat  (b) quantity of heat  (c) thermal capacity  (d)entropy  (e) work.

Description : Calorie is a measure of  (a) specific heat  (b) quantity of heat  (c) thermal capacity  (d)entropy  (e) work.

Last Answer : Answer : b

1 British thermal unit (BTU) is equivalent to how many joules?  A. 1016  B. 1043  C. 1023  D. 1054

Description : 1 British thermal unit (BTU) is equivalent to how many joules?  A. 1016  B. 1043  C. 1023  D. 1054

Last Answer : 1054

One joule is equivalent to one _____.  A. Kg m/ s^2 ∙  B. Kg m^2/s^2 ∙  C. Kg m^2/s ∙  D. Kg m/s

Description : One joule is equivalent to one _____.  A. Kg m/ s^2 ∙  B. Kg m^2/s^2 ∙  C. Kg m^2/s ∙  D. Kg m/s

Last Answer : Kg m^2/s^2

One calorie is equivalent to how many joules?  A. 4.448  B. 4.184  C. 4.418  D. 4.814

Description : One calorie is equivalent to how many joules?  A. 4.448  B. 4.184  C. 4.418  D. 4.814

Last Answer : 4.184

What is defined as the quantity of heat needed to raise the temperature of one kilogram of water by one degrees Celsius?  a. Kilojoule  b. Btu  c. Kilocalorie  d. Latent heat

Description : What is defined as the quantity of heat needed to raise the temperature of one kilogram of water by one degrees Celsius?  a. Kilojoule  b. Btu  c. Kilocalorie  d. Latent heat

Last Answer : Kilocalorie

Find ∫ for steam at 100 psia and 600°F.If h = 1329.6 and v = 6.216  a. 1214 Btu / lb  b. 1234 Btu /lb  c. 1342 Btu / lb  d. 1324 Btu /lb formula: ∫ = h– pv/ J

Description : Find ∫ for steam at 100 psia and 600°F.If h = 1329.6 and v = 6.216  a. 1214 Btu / lb  b. 1234 Btu /lb  c. 1342 Btu / lb  d. 1324 Btu /lb formula: ∫ = h– pv/ J

Last Answer : 1214Btu / lb

A certain gas with cp = 0.529Btu/lb°R and R = 96.2ft/lbºR expands from 5 ft and 80ºF to 15 ft while the pressure remains constant at 15.5 psia.  a. T2=1.620ºR, ∫H = 122.83 Btu  b. T2 = 2°R, ∫H = 122.83 Btu  c. T2 = 2.620ºR, ∫H = 122.83 Btu  d. T2 = 1°R, ∫H = 122.83 Btu T2= V2(t2)/V1 and ∫H = mcp (T2-T1)

Description : A certain gas with cp = 0.529Btu/lb°R and R = 96.2ft/lbºR expands from 5 ft and 80ºF to 15 ft while the pressure remains constant at 15.5 psia.  a. T2=1.620ºR, ∫H = 122.83 Btu  b. T2 = 2°R, ∫H = 122.83 Btu  c. ... , ∫H = 122.83 Btu  d. T2 = 1°R, ∫H = 122.83 Btu T2= V2(t2)/V1 and ∫H = mcp (T2-T1)

Last Answer : T2=1.620ºR, ∫H = 122.83 Btu

Helium ( R= 0.4698 BTU/lbm-˚R ) is compressed isothermally from 14.7 psia and 68 ˚F. The compression ratio is 1:4. Calculate the work done by the gas.  A. –1454 BTU/lbm  B. -364 BTU/lbm  C.-187BTU/lbm  D.46.7 BTU/lbm Formula: W = RT ln (V2/V1)

Description : Helium ( R= 0.4698 BTU/lbm-˚R ) is compressed isothermally from 14.7 psia and 68 ˚F. The compression ratio is 1:4. Calculate the work done by the gas.  A. –1454 BTU/lbm  B. -364 BTU/lbm  C.-187BTU/lbm  D.46.7 BTU/lbm Formula: W = RT ln (V2/V1)

Last Answer : -364 BTU/lbm

Find the change in internal energy of 5 lb. of oxygen gas when the temperature changes from 100 ˚F to 120 ˚F. CV = 0.157 BTU/lbm-˚R  A.14.7 BTU  B.15.7 BTU  C. 16.8 BTU  D. 15.9 BTU Formula: U= mcv T

Description : Find the change in internal energy of 5 lb. of oxygen gas when the temperature changes from 100 ˚F to 120 ˚F. CV = 0.157 BTU/lbm-˚R  A.14.7 BTU  B.15.7 BTU  C. 16.8 BTU  D. 15.9 BTU Formula: U= mcv T

Last Answer : 15.7 BTU

Calculate the entropy of steam at 60psiawith a quality of 0.8  A. 0.4274 BTU/lbm-˚R  B. 0.7303 BTU/lbm-˚R  C. 1.1577 BTU/lbm-˚R  D. 1.2172 BTU/lbm-˚R Formula: fromthe steamtable at 60 psia: sƒ = 0.4274 BTU/lbm-˚R sƒg = 1.2172 BTU/lbm-˚R) s = sƒ + x sƒg where x = is the quality

Description : Calculate the entropy of steam at 60psiawith a quality of 0.8  A. 0.4274 BTU/lbm-˚R  B. 0.7303 BTU/lbm-˚R  C. 1.1577 BTU/lbm-˚R  D. 1.2172 BTU/lbm-˚R Formula: fromthe steamtable at 60 psia: sƒ = 0.4274 BTU/lbm-˚R sƒg = 1.2172 BTU/lbm-˚R) s = sƒ + x sƒg where x = is the quality

Last Answer : 1.1577 BTU/lbm-˚R

Who coined the word energy?  a. James Joule  b. Thomas Young  c. Rudolf Diesel  d. Kelvin

Description : Who coined the word energy?  a. James Joule  b. Thomas Young  c. Rudolf Diesel  d. Kelvin

Last Answer : Thomas Young

A Bell-Coleman cycle is a reversed of which the following cycles?  a. Stirling cycle  b. Joule cycle  c. Carnot cycle  d. Otto cycle

Description : A Bell-Coleman cycle is a reversed of which the following cycles?  a. Stirling cycle  b. Joule cycle  c. Carnot cycle  d. Otto cycle

Last Answer : Joule cycle

_________ is the unit of pressure and stress.  a) Newton  b) Pascal  c) Hertz  d) Joule

Description : _________ is the unit of pressure and stress.  a) Newton  b) Pascal  c) Hertz  d) Joule

Last Answer : Pascal

__________ is the unit of force.  a) Newton  b) Pascal  c) Hertz  d) Joule

Description : __________ is the unit of force.  a) Newton  b) Pascal  c) Hertz  d) Joule

Last Answer : Newton

In thermodynamics, a throttling process, also called a _________, is a type of isenthalpic process where a liquid or gas is cooled as it passes from a higher pressure state to a lower pressure state.  a. Rankine Process  b. Carnot Cycle  c. Joule-Thomson process  d. Refrigeration process

Description : In thermodynamics, a throttling process, also called a _________, is a type of isenthalpic process where a liquid or gas is cooled as it passes from a higher pressure state to a lower pressure state.  a. Rankine Process  b. Carnot Cycle  c. Joule-Thomson process  d. Refrigeration process

Last Answer : Joule-Thomson process

What is defined as the ratio of the change in temperature to the change in pressure when a real gas is throttled?  A. Rankine coefficient  B. Kelvin coefficient  C. Maxwell-Boltzmann coefficient  D. Joule-Thomson coefficient

Description : What is defined as the ratio of the change in temperature to the change in pressure when a real gas is throttled?  A. Rankine coefficient  B. Kelvin coefficient  C. Maxwell-Boltzmann coefficient  D. Joule-Thomson coefficient

Last Answer : Joule-Thomson coefficient

Entropy is measured in ______.  A. Joule/Kelvin  B. Joule-Meter/Kelvin  C. Meter/Kelvin  D. Newton/Kelvin

Description : Entropy is measured in ______.  A. Joule/Kelvin  B. Joule-Meter/Kelvin  C. Meter/Kelvin  D. Newton/Kelvin

Last Answer : Joule/Kelvin

The efficiency of Joule cycle is  A. greater than Carnot cycle  B. less than Carnot cycle  C. equal to Carnot cycle  D. none of these

Description : The efficiency of Joule cycle is  A. greater than Carnot cycle  B. less than Carnot cycle  C. equal to Carnot cycle  D. none of these

Last Answer : Answer: B

The following cycle is used for air craft refrigeration  (a) Brayton cycle  (b) Joule cycle  (c) Carnot cycle  (d) Bell-Coleman cycle  (e) Reversed-Brayton cycle.

Description : The following cycle is used for air craft refrigeration  (a) Brayton cycle  (b) Joule cycle  (c) Carnot cycle  (d) Bell-Coleman cycle  (e) Reversed-Brayton cycle.

Last Answer : Answer : e

Which of the following cycles has maximum efficiency  (a) Rankine  (b) Stirling  (c) Carnot  (d) Brayton  (e) Joule.

Description : Which of the following cycles has maximum efficiency  (a) Rankine  (b) Stirling  (c) Carnot  (d) Brayton  (e) Joule.

Last Answer : Answer : c

Which of the following cycles is not a reversible cycle  (a) Carnot  (b) Ericsson  (c) Stirling  (d) Joule  (e) none of the above.

Description : Which of the following cycles is not a reversible cycle  (a) Carnot  (b) Ericsson  (c) Stirling  (d) Joule  (e) none of the above.

Last Answer : Answer : e

Reversed joule cycle is called  (a) Carnot cycle  (b) Rankine cycle  (c) Brayton cycle  (d) Bell Coleman cycle  (e) Dual cycle.

Description : Reversed joule cycle is called  (a) Carnot cycle  (b) Rankine cycle  (c) Brayton cycle  (d) Bell Coleman cycle  (e) Dual cycle.

Last Answer : Answer : c

A cycle consisting of two adiabatics and two constant pressure processes is known as  (a) Otto cycle  (b) Ericsson cycle  (c) Joule cycle  (d) Stirling cycle  (e) Atkinson cycle.

Description : A cycle consisting of two adiabatics and two constant pressure processes is known as  (a) Otto cycle  (b) Ericsson cycle  (c) Joule cycle  (d) Stirling cycle  (e) Atkinson cycle.

Last Answer : Answer : c

Thermal power plant works on  (a) Carnot cycle  (b) Joule cycle  (d) Rankine cycle  (d) Otto cycle  (e) Brayton cycle.

Description : Thermal power plant works on  (a) Carnot cycle  (b) Joule cycle  (d) Rankine cycle  (d) Otto cycle  (e) Brayton cycle.

Last Answer : Answer : c

The unit of power in S.I. units is  (a) newton  (b) pascal  (c) erg  (d) watt  (e) joule.

Description : The unit of power in S.I. units is  (a) newton  (b) pascal  (c) erg  (d) watt  (e) joule.

Last Answer : Answer : d

The unit of energy in S.I. units is  (a) watt  (b) joule  (c) joule/s  (d) joule/m  (e) joule m.

Description : The unit of energy in S.I. units is  (a) watt  (b) joule  (c) joule/s  (d) joule/m  (e) joule m.

Last Answer : Answer : b

One calorie is equal to _________.  a. 1/180 W.h  b. 1/860 W.h  c. 1/360 W.h  d. 1/250 W.h

Description : One calorie is equal to _________.  a. 1/180 W.h  b. 1/860 W.h  c. 1/360 W.h  d. 1/250 W.h

Last Answer : 1/860 W.h

Study of transformation of heat energy to mechanical energy to other forms of energy.  a. Thermodynamics  b. Physics  c. Mechanics  d. None of the above

Description : Study of transformation of heat energy to mechanical energy to other forms of energy.  a. Thermodynamics  b. Physics  c. Mechanics  d. None of the above

Last Answer : Thermodynamics

An adiabatic process is one in which  A.no heat enters or leaves the gas  B.the temperature of the gas changes  C.the change in internal energy is equal to the mechanical workdone  D.all of the above

Description : An adiabatic process is one in which  A.no heat enters or leaves the gas  B.the temperature of the gas changes  C.the change in internal energy is equal to the mechanical workdone  D.all of the above

Last Answer : Answer: D

The first law of thermodynamics may be expressed in the following equivalent  a. the net heat transfer id equal to the network  b. the sum of the total energy forms leaving the system boundary is always equal to the energy input  c. energy can neither be created nor destroyed but only converted from one form to another  d. all of the above

Description : The first law of thermodynamics may be expressed in the following equivalent  a. the net heat transfer id equal to the network  b. the sum of the total energy forms leaving the system boundary is ... neither be created nor destroyed but only converted from one form to another  d. all of the above

Last Answer : all of the above

What refers to the heat needed to change the temperature of the substances without changing its phases?  a. Latent heat  b. Sensible heat  c. Specific heat  d. entropy

Description : What refers to the heat needed to change the temperature of the substances without changing its phases?  a. Latent heat  b. Sensible heat  c. Specific heat  d. entropy

Last Answer : Sensible heat

Is the force of gravity on unit volume?  a. Specific Weight  b. Specific Heat  c. Specific Pressure  d. Specific Volume

Description : Is the force of gravity on unit volume?  a. Specific Weight  b. Specific Heat  c. Specific Pressure  d. Specific Volume

Last Answer : Specific Weight

The volume of a confined gas is held constant, the pressure is directly proportional to the absolute temperature.  a. Charle’s Law  b. Boyle’s Law  c. Joule’s Law  d. Specific Heat

Description : The volume of a confined gas is held constant, the pressure is directly proportional to the absolute temperature.  a. Charle’s Law  b. Boyle’s Law  c. Joule’s Law  d. Specific Heat

Last Answer : Boyle’s Law

Specific heat capacity in SI unit.  a. kJ / kg.k  b. kJ / kg  c. kN / kg  d. None of the above

Description : Specific heat capacity in SI unit.  a. kJ / kg.k  b. kJ / kg  c. kN / kg  d. None of the above

Last Answer : kJ / kg.k

The ratio of the weight of a substance to the weight of some standard substance is called?  a. Specific Heat  b. Specific Gravity  c. Isothermal  d. Specific Weight

Description : The ratio of the weight of a substance to the weight of some standard substance is called?  a. Specific Heat  b. Specific Gravity  c. Isothermal  d. Specific Weight

Last Answer : Specific Gravity

Sum of the internal energy of a substance and the product of pressure and volume.  a. Specific Heat  b. Specific Gravity  c. Isolated System  d. Enthalpy

Description : Sum of the internal energy of a substance and the product of pressure and volume.  a. Specific Heat  b. Specific Gravity  c. Isolated System  d. Enthalpy

Last Answer : Enthalpy

A system having a rigid boundary that energy, work and mass does not cross its boundaries  a. Specific Heat  b. Specific Gravity  c. Isolated System  d. Enthalpy

Description : A system having a rigid boundary that energy, work and mass does not cross its boundaries  a. Specific Heat  b. Specific Gravity  c. Isolated System  d. Enthalpy

Last Answer : Isolated System

A unit of pressure used in high vacuum technology, which is equal to 1mmhg.  a. specific heat  b. isometric  c. isobaric  d. torr

Description : A unit of pressure used in high vacuum technology, which is equal to 1mmhg.  a. specific heat  b. isometric  c. isobaric  d. torr

Last Answer : torr

The heat per unit mass per degree change in temperature  a. specific heat  b. isometric  c. conservation of energy  d. none of the above

Description : The heat per unit mass per degree change in temperature  a. specific heat  b. isometric  c. conservation of energy  d. none of the above

Last Answer : specific heat

Gas being heated at constant volume is undergoing the process of.  a. isometric  b. specific heat  c. enthalpy  d. isothermal

Description : Gas being heated at constant volume is undergoing the process of.  a. isometric  b. specific heat  c. enthalpy  d. isothermal

Last Answer : isometric

Composite property applicable to all fluids  a. Entropy  b. Enthalpy  c. Specific Heat  d. None of the above

Description : Composite property applicable to all fluids  a. Entropy  b. Enthalpy  c. Specific Heat  d. None of the above

Last Answer : Enthalpy

_____ is that property of a substance which remains constant if no heat enters or leaves the substance, while it does work or alters its volume, but which increases or diminishes should a small amount of heat enter or leave.  a. Entrophy  b. Enthalpy  c. Specific Heat  d. None of the above

Description : _____ is that property of a substance which remains constant if no heat enters or leaves the substance, while it does work or alters its volume, but which increases or diminishes should a small amount of heat enter or leave.  a. Entrophy  b. Enthalpy  c. Specific Heat  d. None of the above

Last Answer : Entrophy