A cycle consisting of two adiabatics and two constant pressure processes is known as  (a) Otto cycle  (b) Ericsson cycle  (c) Joule cycle  (d) Stirling cycle  (e) Atkinson cycle.

A cycle consisting of two adiabatics and two constant pressure processes is known as
 (a) Otto cycle
 (b) Ericsson cycle
 (c) Joule cycle
 (d) Stirling cycle
 (e) Atkinson cycle.
by

1 Answer

Answer :

Answer : c
by

Related questions

A cycle consisting of one constant pressure, one constant volume and two isentropic processes is known as  A.Carnot cycle  B.Stirling cycle  C.Otto cycle  D.Diesel cycle

Description : A cycle consisting of one constant pressure, one constant volume and two isentropic processes is known as  A.Carnot cycle  B.Stirling cycle  C.Otto cycle  D.Diesel cycle

Last Answer : Answer: D

Which of the following cycles is not a reversible cycle  (a) Carnot  (b) Ericsson  (c) Stirling  (d) Joule  (e) none of the above.

Description : Which of the following cycles is not a reversible cycle  (a) Carnot  (b) Ericsson  (c) Stirling  (d) Joule  (e) none of the above.

Last Answer : Answer : e

A Bell-Coleman cycle is a reversed of which the following cycles?  a. Stirling cycle  b. Joule cycle  c. Carnot cycle  d. Otto cycle

Description : A Bell-Coleman cycle is a reversed of which the following cycles?  a. Stirling cycle  b. Joule cycle  c. Carnot cycle  d. Otto cycle

Last Answer : Joule cycle

Which of the following is an irreversible cycle  (a) carnot  (b) Stirling  (c) ericsson  (d) all of the above  (e) none of the above.

Description : Which of the following is an irreversible cycle  (a) carnot  (b) Stirling  (c) ericsson  (d) all of the above  (e) none of the above.

Last Answer : Answer : e

Ericsson cycle consists of two constant pressure and two isothermal processes.  A. Agree  B. Disagree

Description : Ericsson cycle consists of two constant pressure and two isothermal processes.  A. Agree  B. Disagree

Last Answer : Answer: A

Otto cycle consists of following four processes  (a) two isothermals and two isentropics  (b) two isentropics and two constant volumes  (c) two isentropics, one constant volume and one constant pressure  (d) two isentropics and two constant pres-sures  (e) none of the above.

Description : Otto cycle consists of following four processes  (a) two isothermals and two isentropics  (b) two isentropics and two constant volumes  (c) two isentropics, one constant volume and one constant pressure  (d) two isentropics and two constant pres-sures  (e) none of the above.

Last Answer : Answer : b

Stirling and Ericsson cycles are  (a) reversible cycles  (b) irreversible cycles  (c) quasi-static cycles  (d) semi-reversible cycles  (e) adiabatic irreversible cycles.

Description : Stirling and Ericsson cycles are  (a) reversible cycles  (b) irreversible cycles  (c) quasi-static cycles  (d) semi-reversible cycles  (e) adiabatic irreversible cycles.

Last Answer : Answer : a

Thermal power plant works on  (a) Carnot cycle  (b) Joule cycle  (d) Rankine cycle  (d) Otto cycle  (e) Brayton cycle.

Description : Thermal power plant works on  (a) Carnot cycle  (b) Joule cycle  (d) Rankine cycle  (d) Otto cycle  (e) Brayton cycle.

Last Answer : Answer : c

Stirling and Ericsson cycles are  A. reversible cycles  B. irreversible cycles  C. semi-reversible cycles  D. quasi-static cycles

Description : Stirling and Ericsson cycles are  A. reversible cycles  B. irreversible cycles  C. semi-reversible cycles  D. quasi-static cycles

Last Answer : Answer: A

What states that thermal efficiencies of all reversible heat engines operating between the same two reservoirs are the same and that no heat engine is more efficient than a reversible one operating between the same two reservoirs?  A. Ericson principle  B. Carnot principle  C. Otto principle  D. Stirling principle

Description : What states that thermal efficiencies of all reversible heat engines operating between the same two reservoirs are the same and that no heat engine is more efficient than a reversible one operating between the ... A. Ericson principle  B. Carnot principle  C. Otto principle  D. Stirling principle

Last Answer : Carnot principle

What is the highest efficiency of heat engine operating between the two thermal energy reservoirs at temperature limits?  A. Ericson efficiency  B. Otto efficiency  C. Carnot efficiency  D. Stirling efficiency

Description : What is the highest efficiency of heat engine operating between the two thermal energy reservoirs at temperature limits?  A. Ericson efficiency  B. Otto efficiency  C. Carnot efficiency  D. Stirling efficiency

Last Answer : Carnot efficiency

Which of the following cycles has maximum efficiency  (a) Rankine  (b) Stirling  (c) Carnot  (d) Brayton  (e) Joule.

Description : Which of the following cycles has maximum efficiency  (a) Rankine  (b) Stirling  (c) Carnot  (d) Brayton  (e) Joule.

Last Answer : Answer : c

Otto cycle is also known as  A. constant pressure cycle  B. constant volume cycle  C. constant temperature cycle  D. constant temperature and pressure cycle

Description : Otto cycle is also known as  A. constant pressure cycle  B. constant volume cycle  C. constant temperature cycle  D. constant temperature and pressure cycle

Last Answer : Answer: B

It is used for gas turbines which operates on an open cycle where both the compression and expansion processes take place in rotating machinery.  a. Dual Cycle  b. Otto Cycle  c. Carnot Cycle  d. Brayton Cycle

Description : It is used for gas turbines which operates on an open cycle where both the compression and expansion processes take place in rotating machinery.  a. Dual Cycle  b. Otto Cycle  c. Carnot Cycle  d. Brayton Cycle

Last Answer : Brayton Cycle

The most efficient cycle that can operate between two constant temperature reservoir is the _________.  a. Otto Cycle  b. Lazare Cycle  c. Isothermal Cycle  d. Carnot Cycle

Description : The most efficient cycle that can operate between two constant temperature reservoir is the _________.  a. Otto Cycle  b. Lazare Cycle  c. Isothermal Cycle  d. Carnot Cycle

Last Answer : Carnot Cycle

Otto cycle efficiency is higher than Diesel cycle efficiency for the same compression ratio and heat input because in Otto cycle  A. combustion is at constant volume  B. expansion and compression are isentropic  C. maximum temperature is higher  D. heat rejection is lower

Description : Otto cycle efficiency is higher than Diesel cycle efficiency for the same compression ratio and heat input because in Otto cycle  A. combustion is at constant volume  B. expansion and compression are isentropic  C. maximum temperature is higher  D. heat rejection is lower

Last Answer : Answer: D

The efficiency of Diesel cycle approaches to Otto cycle efficiency when  A. cut-off is increased  B. cut-off is decreased  C. cut-off is zero  D. cut-off is constant

Description : The efficiency of Diesel cycle approaches to Otto cycle efficiency when  A. cut-off is increased  B. cut-off is decreased  C. cut-off is zero  D. cut-off is constant

Last Answer : Answer: C

If both Stirling and Carnot cycles operate within the same temperature limits, then efficiency of Stirling cycle as compared to Carnot cycle  (a) more  (b) less  (c) equal  (d) depends on other factors  (e) none of the above.

Description : If both Stirling and Carnot cycles operate within the same temperature limits, then efficiency of Stirling cycle as compared to Carnot cycle  (a) more  (b) less  (c) equal  (d) depends on other factors  (e) none of the above.

Last Answer : Answer : c

Brayton cycle consists’ of following four processes  (a) two isothermals and two isentropics  (b) two isentropics and two constant volumes  (c) two isentropics, one constant volume and one constant pressure  (d) two isentropics and two constant pres-sures  (e) none of the above.

Description : Brayton cycle consists’ of following four processes  (a) two isothermals and two isentropics  (b) two isentropics and two constant volumes  (c) two isentropics, one constant volume and one constant pressure  (d) two isentropics and two constant pres-sures  (e) none of the above.

Last Answer : Answer : d

Diesel cycle consists of following four processes  (a) two isothermals and two isentropics  (b) two isentropics, and two constant volumes.  (c) two isentropics, one constant volume and one constant pressure  (d) two isentropics and two constant pressures  (e) none of the above.

Description : Diesel cycle consists of following four processes  (a) two isothermals and two isentropics  (b) two isentropics, and two constant volumes.  (c) two isentropics, one constant volume and one constant pressure  (d) two isentropics and two constant pressures  (e) none of the above.

Last Answer : Answer : c

Which of the following best describes both Stirling and Ericson engines?  a. Internal combustion engine  b. External combustion engine  c. Diesel cycle  d. Rankine cycle

Description : Which of the following best describes both Stirling and Ericson engines?  a. Internal combustion engine  b. External combustion engine  c. Diesel cycle  d. Rankine cycle

Last Answer : External combustion engine

The efficiency of Stirling cycle is __________ Carnot cycle.  A. greater than  B. less than  C. equal to

Description : The efficiency of Stirling cycle is __________ Carnot cycle.  A. greater than  B. less than  C. equal to

Last Answer : Answer: C

The dual combustion cycle consists of one constant pressure, two constant volume and two isentropic processes.  A. Agree  B. Disagree

Description : The dual combustion cycle consists of one constant pressure, two constant volume and two isentropic processes.  A. Agree  B. Disagree

Last Answer : Answer: A

In thermodynamics, a throttling process, also called a _________, is a type of isenthalpic process where a liquid or gas is cooled as it passes from a higher pressure state to a lower pressure state.  a. Rankine Process  b. Carnot Cycle  c. Joule-Thomson process  d. Refrigeration process

Description : In thermodynamics, a throttling process, also called a _________, is a type of isenthalpic process where a liquid or gas is cooled as it passes from a higher pressure state to a lower pressure state.  a. Rankine Process  b. Carnot Cycle  c. Joule-Thomson process  d. Refrigeration process

Last Answer : Joule-Thomson process

The amount of heat required to raise the temperature of the unit mass of gas through one degree at constant volume, is called  A.specific heat at constant volume  B.specific heat at constant pressure  C.kilo Joule  D.none of these

Description : The amount of heat required to raise the temperature of the unit mass of gas through one degree at constant volume, is called  A.specific heat at constant volume  B.specific heat at constant pressure  C.kilo Joule  D.none of these

Last Answer : Answer: A

For same compression ratio and for same heat added  (a) Otto cycle is more efficient than Diesel cycle  (b) Diesel cycle is more efficient than Otto cycle  (c) efficiency depends on other factors  (d) both Otto and Diesel cycles are equally efficient  (e) none of the above.

Description : For same compression ratio and for same heat added  (a) Otto cycle is more efficient than Diesel cycle  (b) Diesel cycle is more efficient than Otto cycle  (c) efficiency depends on other factors  (d) both Otto and Diesel cycles are equally efficient  (e) none of the above.

Last Answer : Answer : a

Which of the following is used in thermal power plant?  a. Brayton cycle  b. Reversed carnot cycle  c. Rankine cycle  d. Otto cycle

Description : Which of the following is used in thermal power plant?  a. Brayton cycle  b. Reversed carnot cycle  c. Rankine cycle  d. Otto cycle

Last Answer : Rankine cycle

Gasoline and Diesel Engines are best described by the _________.  a. Otto Cycle  b. Burnign Cycle  c. Shikki Cycle  d. Shapa R’ Elli Cycle

Description : Gasoline and Diesel Engines are best described by the _________.  a. Otto Cycle  b. Burnign Cycle  c. Shikki Cycle  d. Shapa R’ Elli Cycle

Last Answer : Otto Cycle

When cut-off ratio is __________ the efficiency of Diesel cycle approaches to Otto cycle efficiency.  A. zero  B. 1/5  C. 4/5  D. 1

Description : When cut-off ratio is __________ the efficiency of Diesel cycle approaches to Otto cycle efficiency.  A. zero  B. 1/5  C. 4/5  D. 1

Last Answer : Answer: A

The following cycle is used for air craft refrigeration  (a) Brayton cycle  (b) Joule cycle  (c) Carnot cycle  (d) Bell-Coleman cycle  (e) Reversed-Brayton cycle.

Description : The following cycle is used for air craft refrigeration  (a) Brayton cycle  (b) Joule cycle  (c) Carnot cycle  (d) Bell-Coleman cycle  (e) Reversed-Brayton cycle.

Last Answer : Answer : e

Reversed joule cycle is called  (a) Carnot cycle  (b) Rankine cycle  (c) Brayton cycle  (d) Bell Coleman cycle  (e) Dual cycle.

Description : Reversed joule cycle is called  (a) Carnot cycle  (b) Rankine cycle  (c) Brayton cycle  (d) Bell Coleman cycle  (e) Dual cycle.

Last Answer : Answer : c

The efficiency of Joule cycle is  A. greater than Carnot cycle  B. less than Carnot cycle  C. equal to Carnot cycle  D. none of these

Description : The efficiency of Joule cycle is  A. greater than Carnot cycle  B. less than Carnot cycle  C. equal to Carnot cycle  D. none of these

Last Answer : Answer: B

Which of the following processes are thermodynamically reversible  (a) throttling  (b) free expansion  (c) constant volume and constant pressure  (d) hyperbolic and pV = C  (e) isothermal and adiabatic.

Description : Which of the following processes are thermodynamically reversible  (a) throttling  (b) free expansion  (c) constant volume and constant pressure  (d) hyperbolic and pV = C  (e) isothermal and adiabatic.

Last Answer : Answer : e

The constant pressure, constant volume and constant pvn processes are regarded as irreversible process.  A. True  B. False

Description : The constant pressure, constant volume and constant pvn processes are regarded as irreversible process.  A. True  B. False

Last Answer : Answer: A

_________ is the unit of pressure and stress.  a) Newton  b) Pascal  c) Hertz  d) Joule

Description : _________ is the unit of pressure and stress.  a) Newton  b) Pascal  c) Hertz  d) Joule

Last Answer : Pascal

What is defined as the ratio of the change in temperature to the change in pressure when a real gas is throttled?  A. Rankine coefficient  B. Kelvin coefficient  C. Maxwell-Boltzmann coefficient  D. Joule-Thomson coefficient

Description : What is defined as the ratio of the change in temperature to the change in pressure when a real gas is throttled?  A. Rankine coefficient  B. Kelvin coefficient  C. Maxwell-Boltzmann coefficient  D. Joule-Thomson coefficient

Last Answer : Joule-Thomson coefficient

If a system after undergoing a series of processes, returns to the initial state then  (a) process is thermodynamically in equilibrium  (b) process is executed in closed system cycle  (c) its entropy will change due to irreversibility  (d) sum of heat and work transfer will be zero  (e) no work will be done by the system.

Description : If a system after undergoing a series of processes, returns to the initial state then  (a) process is thermodynamically in equilibrium  (b) process is executed in closed system cycle  (c) its entropy will ... sum of heat and work transfer will be zero  (e) no work will be done by the system.

Last Answer : Answer : d

Gas turbine cycle consists of  (a) two isothermals and two isentropics  (b) two isentropics and two constant volumes  (c) two isentropics, one constant volume and one constant pressure  (d) two isentropics and two constant pressures  (e) none of the above.

Description : Gas turbine cycle consists of  (a) two isothermals and two isentropics  (b) two isentropics and two constant volumes  (c) two isentropics, one constant volume and one constant pressure  (d) two isentropics and two constant pressures  (e) none of the above.

Last Answer : Answer : d

In a Carnot cycle, heat is transferred at  (a) constant pressure  (b) constant volume  (c) constant temperature  (d) constant enthaply  (e) any one of the above.

Description : In a Carnot cycle, heat is transferred at  (a) constant pressure  (b) constant volume  (c) constant temperature  (d) constant enthaply  (e) any one of the above.

Last Answer : Answer : c

The Carnot cycle is composed of ______ processes.  A. One isothermal and one adiabatic  B. One isothermal and two adiabatic  C. Two isothermal and one adiabatic  D. Two isothermal and two adiabatic

Description : The Carnot cycle is composed of ______ processes.  A. One isothermal and one adiabatic  B. One isothermal and two adiabatic  C. Two isothermal and one adiabatic  D. Two isothermal and two adiabatic

Last Answer : Two isothermal and two adiabatic

The Carnot cycle is composed of how many reversible processes?  A. 2  B. 3  C. 4  D. 5

Description : The Carnot cycle is composed of how many reversible processes?  A. 2  B. 3  C. 4  D. 5

Last Answer : 4

Which of the following engines was introduced by a German engineer, Nickolas Otto?  a. Gasoline engine  b. Diesel engine  c. Gas turbine  d. Thermal engine

Description : Which of the following engines was introduced by a German engineer, Nickolas Otto?  a. Gasoline engine  b. Diesel engine  c. Gas turbine  d. Thermal engine

Last Answer : Gasoline engine

The unit of power in S.I. units is  (a) newton  (b) pascal  (c) erg  (d) watt  (e) joule.

Description : The unit of power in S.I. units is  (a) newton  (b) pascal  (c) erg  (d) watt  (e) joule.

Last Answer : Answer : d

The unit of energy in S.I. units is  (a) watt  (b) joule  (c) joule/s  (d) joule/m  (e) joule m.

Description : The unit of energy in S.I. units is  (a) watt  (b) joule  (c) joule/s  (d) joule/m  (e) joule m.

Last Answer : Answer : b

Who coined the word energy?  a. James Joule  b. Thomas Young  c. Rudolf Diesel  d. Kelvin

Description : Who coined the word energy?  a. James Joule  b. Thomas Young  c. Rudolf Diesel  d. Kelvin

Last Answer : Thomas Young

The mechanical equivalent of heat is  a. joule  b. calorie  c. Btu  d. Specific heat

Description : The mechanical equivalent of heat is  a. joule  b. calorie  c. Btu  d. Specific heat

Last Answer : joule

__________ is the unit of force.  a) Newton  b) Pascal  c) Hertz  d) Joule

Description : __________ is the unit of force.  a) Newton  b) Pascal  c) Hertz  d) Joule

Last Answer : Newton

_________ is the quantity of heat required to raise the temperature of one pound of water 1 F˚ from 63 ˚F to 64 ˚F.  a. one Joule  b. one calorie  c. one watt  d. one BTU

Description : _________ is the quantity of heat required to raise the temperature of one pound of water 1 F˚ from 63 ˚F to 64 ˚F.  a. one Joule  b. one calorie  c. one watt  d. one BTU

Last Answer : one BTU

The amount of heat required to raise the temperature of 1 pound of water by 1°F is called ______.  A. Calorie  B. Joule  C. BTU  D. Kilocalorie

Description : The amount of heat required to raise the temperature of 1 pound of water by 1°F is called ______.  A. Calorie  B. Joule  C. BTU  D. Kilocalorie

Last Answer : BTU

The amount of heat required to raise the temperature of 1kg of water through 1 °C is called ______.  A. Calorie  B. Joule  C. BTU  D. Kilocalorie

Description : The amount of heat required to raise the temperature of 1kg of water through 1 °C is called ______.  A. Calorie  B. Joule  C. BTU  D. Kilocalorie

Last Answer : Kilocalorie