Description : It is an energy flux, equal to the rate of energy flow per unit area per unit time across some surface. a. Irradiance b. Radiant Intensity c. Luminosity d. Brightness
Last Answer : Luminosity
Description : A system which consists of fixed amount of mass and no mass can cross its boundary called _____. A. Equilibrium system B. Thermal equilibrium system C. Open system D. Closed system
Last Answer : Closed system
Description : “If the temperature o f a fixed quantity of a gas is held constant during a change of state, the volume varies inversely with the absolute pressure. a. Charle’s Law b. Boyle’s Law c. Dalton’s Law d. Amagat’s Law
Last Answer : Boyle’s Law
Description : What do you call a system in which there is a flow of matter through the boundary? a. Closed system b. Open system c. Isolated system d. All of these
Last Answer : Open system
Description : The entropy change of a system during a process is equal to the net entropy transfer through the system boundary and the entropy generated within the system . This statement is known as: A. Entropy ... B. Entropy change of a system C. Entropy balance relation D. Third law of thermodynamics
Last Answer : Entropy balance relation
Description : What refers to the series of states through which a system passes during the process? a. path b. quasi- static steps c. reversibility moves d. irreversibility moves
Last Answer : path
Description : What refers to the series of state through which a system passes during a process? A. Path B. Phase C. Cycle D. Direction
Last Answer : Path
Description : What refers to the rate of thermal radiation emitter per unit area of a body? A. Thermal conductivity B. Absorptivity C. Emissivity D. Emissive power
Last Answer : Emissive power
Description : Anything that is outside the system boundary is called ________. a. Surrounding b. Natural Environment c. Closed System d. Open System
Last Answer : Surrounding
Description : A system having a rigid boundary that energy, work and mass does not cross its boundaries a. Specific Heat b. Specific Gravity c. Isolated System d. Enthalpy
Last Answer : Isolated System
Description : Work done in pushing a fluid across a boundary, Usually into or out of a system a. Flow Work b. Flow Energy c. Both a & b d. None of the above
Last Answer : Both a & b
Description : A system whose boundary does not allow the exchange of either matter or energy with the surrounding a. open system b. closed system c. isolated system d. none of the above
Last Answer : isolated system
Description : The first law of thermodynamics may be expressed in the following equivalent a. the net heat transfer id equal to the network b. the sum of the total energy forms leaving the system boundary is ... neither be created nor destroyed but only converted from one form to another d. all of the above
Last Answer : all of the above
Description : The flow energy of 5 ft3 of a fluid passing a boundary to a system is 80,000 ft-lb. Determine the pressure at this point. a. 222 psi b. 333 psi c. 444 psi d. 111 psi formula: Ef= pV
Last Answer : 111 psi
Description : Gas is enclosed in a cylinder with a weighted piston as the stop boundary. The gas is heated and expands from a volume of 0.04 m^3 to 0.10 m^3 at a constant pressure of 200kPa.Calculate the work done by the system. A. 8 kJ B. 10 kJ C.12 kJ D.14 kJ Formula: W = p(V2-V1)
Last Answer : 12 kJ
Description : The flow energy of 150 L of a fluid passing a boundary to a system is 110 kJ. Determine the pressure at this point a. 733.33 kPa b. 833.33 kPa c. 933.33 kPa d. 633.33 kPa
Last Answer : 733.33 kPa
Description : A gas is enclosed in a cylinder with a weighted piston as the top boundary. The gas is heated and expands from a volume of 0.04 m3 to 0.10 m3 at a constant pressure of 200 kPa. Find the work done on the system. a. 5 kJ b. 15 kJ c. 10 kJ d. 12 kJ
Description : The contact surface shared by both the system and the surroundings is called _________. a. wall b. boundary c. interface d. intersection
Last Answer : boundary
Description : What is a form of mechanical work which is related with the expansion and compression of substances? A. Boundary work B. Thermodynamic work C. Phase work D. System work
Last Answer : Boundary work
Description : The boundaries of a control volume, which may either real or imaginary is called _____. A. Control boundary B. Control system C. Interface D. Control surface
Last Answer : Control surface
Description : A system in which even energy is not allowed to cross the boundary is called ____. A. Closed system B. Exclusive system C. Isolated system D. Special system
Last Answer : Isolated system
Description : What is the real or imaginary surface that separates the system from its surroundings? A. Division B. Wall C. Boundary D. Interface
Last Answer : Boundary
Description : What is the mass or region outside the system called? A. Surroundings B. Boundary C. Volume D. Environment
Last Answer : Surroundings
Description : What is defined a region in space chosen for study? A. Surroundings B. System C. Boundary D. Volume
Last Answer : System
Description : A closed system is one in which heat and work crosses the boundary of the system but the mass of the working substance does not crosses the boundary of the system. A. Yes B. No
Last Answer : Answer: A
Description : An isolated system is one in which (a) mass does not cross boundaries of the system, though energy may do so (b) neither mass nor energy crosses the boundaries of the system (c) both ... system (d) mass crosses the boundary but not the energy (e) thermodynamic reactions do not occur.
Last Answer : Answer : b
Description : An open system is one in which (a) mass does not cross boundaries of the system, though energy may do so (b) neither mass nor energy crosses the boundaries of the system (c) both energy ... system (d) mass crosses the boundary but not the energy (e) thermodynamic reactions do not occur.
Last Answer : Answer : c
Description : A closed system is one in which (a) mass does not cross boundaries of the system, though energy may do so (b) mass crosses the boundary but not the energy (c) neither mass nor energy ... (d) both energy and mass cross the boundaries of the system (e) thermodynamic reactions take place.
Last Answer : Answer : a
Description : In thermodynamics, a throttling process, also called a _________, is a type of isenthalpic process where a liquid or gas is cooled as it passes from a higher pressure state to a lower pressure state. a. Rankine Process b. Carnot Cycle c. Joule-Thomson process d. Refrigeration process
Last Answer : Joule-Thomson process
Description : Which one of the following statement is correct? (A) Radiant energy expressed in Joules, is the energy associated with electromagnetic radiation (B) The rate of transfer of radiant energy is called flux ... ) The radiant energy which falls upon a surface is termed as irradiance (D) All of these
Last Answer : Answer: Option D
Description : The heat per unit mass per degree change in temperature a. specific heat b. isometric c. conservation of energy d. none of the above
Last Answer : specific heat
Description : Mass (not weight) per unit volume a. Specific Weight b. Specific Volume c. Density d. None of the above
Last Answer : Density
Description : The force per unit length across such a line in the surface is called _________. a. force per length b. surface tension c. Pressure d. Density
Last Answer : surface tension
Description : The heat Q per unit mass per degree change in temperature that must be supplied or removed to change the temperature of a substance. a. Specific Heat Capacity b. Latent Heat c. Heat of Transformation d. Internal Heat
Last Answer : Specific Heat Capacity
Description : What is defined as the force per unit area? A. Pressure B. Energy C. Work D. Power
Last Answer : Pressure
Description : Extensive properties per unit mass are called _____. A. Specific properties B. Relative properties C. Unit properties D. Phase properties
Last Answer : Specific properties
Description : The pressure’of a gas in terms of its mean kinetic energy per unit volume E is equal to (a) E/3 (b) E/2 (c) 3E/4 (d)2E/3 (e) 5E/4.
Last Answer : Answer : d
Description : The unit of pressure in S.I. units is (a) kg/cm2 (b) mm of water column (c) pascal (d) dynes per square cm (e) bars
Description : What is defined as the quantity of heat needed to raise the temperature of one kilogram of water by one degrees Celsius? a. Kilojoule b. Btu c. Kilocalorie d. Latent heat
Last Answer : Kilocalorie
Description : ______ of a Body is the absolute quantity of a matter in it. a. Mass b. Weight c. Density d. Volume
Last Answer : Mass
Description : Quantities that describe both magnitude & direction a. Physical Quantity b. Scalar Quantity c. Vector Quantity d. None of the above
Last Answer : Vector Quantity
Description : Which is true: a. Energy is a scalar quantity b. Energy is a vector quantity c. Energy is vector & scalar d. None of the above
Last Answer : Energy is a scalar quantity
Description : A vector quantity whose direction is the same as the direction of the velocity a. Force b. Momentum c. Friction d. Resultant
Last Answer : Momentum
Description : _________ is the quantity of heat required to raise the temperature of one pound of water 1 F˚ from 63 ˚F to 64 ˚F. a. one Joule b. one calorie c. one watt d. one BTU
Last Answer : one BTU
Description : A _________ is a quantity whose value depends on the path followed during a particular change in state. a. path function b. point function c. process d. cycle
Last Answer : path function
Description : A _________ is a quantity whose value at any state is independent of the path or process used to reach that state. a. cycle b. path function c. point function d. process
Last Answer : point function
Description : What law asserts that energy has quality as well as quantity? A. First law of Thermodynamics B. Second law of Thermodynamics C. Third law of Thermodynamics D. Zeroth law of Thermodynamics
Last Answer : Second law of Thermodynamics
Description : Which of the following is the correct statement of the second law of thermodynamics? A. It is impossible to construct an engine working on a cyclic process, whose sole purpose is to convert heat energy ... energy, which can be obtained from a given quantity of heat energy. D. all of the above
Last Answer : Answer: D
Description : Calorie is a measure of (a) specific heat (b) quantity of heat (c) thermal capacity (d)entropy (e) work.
Description : The specific heat at constant volume is A. the amount of heat required to raise the temperature of unit mass of gas through one degree, at constant pressure B. the amount of heat required to raise ... to raise the temperature of 1 kg of water through one degree D. any one of the above
Last Answer : Answer: B