What is defined as the force per unit area?  A. Pressure  B. Energy  C. Work  D. Power

What is defined as the force per unit area?
 A. Pressure
 B. Energy
 C. Work
 D. Power
by

1 Answer

Answer :

Pressure
by

Related questions

The force per unit length across such a line in the surface is called _________.  a. force per length  b. surface tension  c. Pressure  d. Density

Description : The force per unit length across such a line in the surface is called _________.  a. force per length  b. surface tension  c. Pressure  d. Density

Last Answer : surface tension

What is defined as the energy required to raise the temperature of a unit mass of a substance by one degree?  A. Latent heat of fusion  B. Molar heat  C. Specific heat capacity  D. Specific heat

Description : What is defined as the energy required to raise the temperature of a unit mass of a substance by one degree?  A. Latent heat of fusion  B. Molar heat  C. Specific heat capacity  D. Specific heat

Last Answer : Specific heat

It is an energy flux, equal to the rate of energy flow per unit area per unit time across some surface.  a. Irradiance  b. Radiant Intensity  c. Luminosity  d. Brightness

Description : It is an energy flux, equal to the rate of energy flow per unit area per unit time across some surface.  a. Irradiance  b. Radiant Intensity  c. Luminosity  d. Brightness

Last Answer : Luminosity

What refers to the rate of thermal radiation emitter per unit area of a body?  A. Thermal conductivity  B. Absorptivity  C. Emissivity  D. Emissive power

Description : What refers to the rate of thermal radiation emitter per unit area of a body?  A. Thermal conductivity  B. Absorptivity  C. Emissivity  D. Emissive power

Last Answer : Emissive power

Is the force of gravity on unit volume?  a. Specific Weight  b. Specific Heat  c. Specific Pressure  d. Specific Volume

Description : Is the force of gravity on unit volume?  a. Specific Weight  b. Specific Heat  c. Specific Pressure  d. Specific Volume

Last Answer : Specific Weight

What is defined as the ratio of the net electrical power output to the rate of fuel energy input?  A. Combustion efficiency  B. Thermal efficiency  C. Overall efficiency  D. Furnace efficiency

Description : What is defined as the ratio of the net electrical power output to the rate of fuel energy input?  A. Combustion efficiency  B. Thermal efficiency  C. Overall efficiency  D. Furnace efficiency

Last Answer : Overall efficiency

The unit of pressure in S.I. units is  (a) kg/cm2  (b) mm of water column  (c) pascal  (d) dynes per square cm  (e) bars

Description : The unit of pressure in S.I. units is  (a) kg/cm2  (b) mm of water column  (c) pascal  (d) dynes per square cm  (e) bars

Last Answer : Answer : c

The heat per unit mass per degree change in temperature  a. specific heat  b. isometric  c. conservation of energy  d. none of the above

Description : The heat per unit mass per degree change in temperature  a. specific heat  b. isometric  c. conservation of energy  d. none of the above

Last Answer : specific heat

The pressure’of a gas in terms of its mean kinetic energy per unit volume E is equal to  (a) E/3  (b) E/2  (c) 3E/4  (d)2E/3  (e) 5E/4.

Description : The pressure’of a gas in terms of its mean kinetic energy per unit volume E is equal to  (a) E/3  (b) E/2  (c) 3E/4  (d)2E/3  (e) 5E/4.

Last Answer : Answer : d

The state of a thermodynamic system is always defined by its:  a. Absolute temperature  b. process  c. properties  d. temperature and pressure

Description : The state of a thermodynamic system is always defined by its:  a. Absolute temperature  b. process  c. properties  d. temperature and pressure

Last Answer : properties

_________ is defined as that equivalent to the pressure due to a column of mercury 76cm long.  a. surface pressure  b. gage pressure  c. standard atmospheric pressure  d. isobaric pressure

Description : _________ is defined as that equivalent to the pressure due to a column of mercury 76cm long.  a. surface pressure  b. gage pressure  c. standard atmospheric pressure  d. isobaric pressure

Last Answer : standard atmospheric pressure

What is defined as the ratio of the change in temperature to the change in pressure when a real gas is throttled?  A. Rankine coefficient  B. Kelvin coefficient  C. Maxwell-Boltzmann coefficient  D. Joule-Thomson coefficient

Description : What is defined as the ratio of the change in temperature to the change in pressure when a real gas is throttled?  A. Rankine coefficient  B. Kelvin coefficient  C. Maxwell-Boltzmann coefficient  D. Joule-Thomson coefficient

Last Answer : Joule-Thomson coefficient

Universal gas constant is defined as equal to product of the molecular weight of the gas and  (a) specific heat at constant pressure  (b) specific heat at constant volume  (c) ratio of two specific heats  (d) gas constant  (e) unity.

Description : Universal gas constant is defined as equal to product of the molecular weight of the gas and  (a) specific heat at constant pressure  (b) specific heat at constant volume  (c) ratio of two specific heats  (d) gas constant  (e) unity.

Last Answer : Answer : d

The pressure exerted by an ideal gas is __________ of the kinetic energy of all the molecules contained in a unit volume of gas.  A.one-half  B.one-third  C.two-third  D.three-fourth

Description : The pressure exerted by an ideal gas is __________ of the kinetic energy of all the molecules contained in a unit volume of gas.  A.one-half  B.one-third  C.two-third  D.three-fourth

Last Answer : Answer: C

What happens to the internal energy of water at reference temperature where enthalpy is zero?  a. Becomes negative  b. Becomes positive  c. Remains constant  d. Cannot be defined

Description : What happens to the internal energy of water at reference temperature where enthalpy is zero?  a. Becomes negative  b. Becomes positive  c. Remains constant  d. Cannot be defined

Last Answer : Becomes negative

Steam at 1000 lbf/ft^2 pressure and 300˚R has specific volume of 6.5 ft^3/lbm and a specific enthalpy of 9800 lbf-ft/lbm. Find the internal energy per pound mass of steam.  A.2500 lbf-ft/lbm  B.3300 lbf-ft/lbm  C.5400 lbf-ft/lbm  D.6900 lbf-ft/lbm Formula: h= u+ pV u= h– pV

Description : Steam at 1000 lbf/ft^2 pressure and 300˚R has specific volume of 6.5 ft^3/lbm and a specific enthalpy of 9800 lbf-ft/lbm. Find the internal energy per pound mass of steam.  A.2500 lbf-ft/lbm  B.3300 lbf-ft/lbm  C.5400 lbf-ft/lbm  D.6900 lbf-ft/lbm Formula: h= u+ pV u= h– pV

Last Answer : 3300 lbf-ft/lbm

__________ is the unit of force.  a) Newton  b) Pascal  c) Hertz  d) Joule

Description : __________ is the unit of force.  a) Newton  b) Pascal  c) Hertz  d) Joule

Last Answer : Newton

The rate at which this is quantity passes through a fixed boundary per unit time  a. Flux  b. Existence  c. Irradiance  d. All of these

Description : The rate at which this is quantity passes through a fixed boundary per unit time  a. Flux  b. Existence  c. Irradiance  d. All of these

Last Answer : All of these

Mass (not weight) per unit volume  a. Specific Weight  b. Specific Volume  c. Density  d. None of the above

Description : Mass (not weight) per unit volume  a. Specific Weight  b. Specific Volume  c. Density  d. None of the above

Last Answer : Density

The heat Q per unit mass per degree change in temperature that must be supplied or removed to change the temperature of a substance.  a. Specific Heat Capacity  b. Latent Heat  c. Heat of Transformation  d. Internal Heat

Description : The heat Q per unit mass per degree change in temperature that must be supplied or removed to change the temperature of a substance.  a. Specific Heat Capacity  b. Latent Heat  c. Heat of Transformation  d. Internal Heat

Last Answer : Specific Heat Capacity

Extensive properties per unit mass are called _____.  A. Specific properties  B. Relative properties  C. Unit properties  D. Phase properties

Description : Extensive properties per unit mass are called _____.  A. Specific properties  B. Relative properties  C. Unit properties  D. Phase properties

Last Answer : Specific properties

The coefficient of performance (COP) is the ratio between the:  A. Power consumption in watts and heat absorbed per hour  B. Heat absorbed per hour and the power consumption in watts  C. Work required and the absorbed heat  D. Absorbed heat and work required

Description : The coefficient of performance (COP) is the ratio between the:  A. Power consumption in watts and heat absorbed per hour  B. Heat absorbed per hour and the power consumption in watts  C. Work required and the absorbed heat  D. Absorbed heat and work required

Last Answer : Absorbed heat and work required

Vapor pressure depends only on _________.  a. pressure  b. force  c. volume  d. temperature

Description : Vapor pressure depends only on _________.  a. pressure  b. force  c. volume  d. temperature

Last Answer : temperature

_________ is the unit of pressure and stress.  a) Newton  b) Pascal  c) Hertz  d) Joule

Description : _________ is the unit of pressure and stress.  a) Newton  b) Pascal  c) Hertz  d) Joule

Last Answer : Pascal

The SI unit of pressure  a. Pa  b. N  c. J  d. None of the above

Description : The SI unit of pressure  a. Pa  b. N  c. J  d. None of the above

Last Answer : Pa

A unit of pressure used in high vacuum technology, which is equal to 1mmhg.  a. specific heat  b. isometric  c. isobaric  d. torr

Description : A unit of pressure used in high vacuum technology, which is equal to 1mmhg.  a. specific heat  b. isometric  c. isobaric  d. torr

Last Answer : torr

What is the SI unit of pressure?  A. Atm  B. Bar  C. Pa  D. Psi

Description : What is the SI unit of pressure?  A. Atm  B. Bar  C. Pa  D. Psi

Last Answer : Pa

The specific heat at constant volume is  A. the amount of heat required to raise the temperature of unit mass of gas through one degree, at constant pressure  B. the amount of heat required to raise the temperature of unit mass of gas through one degree, at constant volume  C. the amount of heat required to raise the temperature of 1 kg of water through one degree  D. any one of the above

Description : The specific heat at constant volume is  A. the amount of heat required to raise the temperature of unit mass of gas through one degree, at constant pressure  B. the amount of heat required to raise ... to raise the temperature of 1 kg of water through one degree  D. any one of the above

Last Answer : Answer: B

The amount of heat required to raise the temperature of the unit mass of gas through one degree at constant volume, is called  A.specific heat at constant volume  B.specific heat at constant pressure  C.kilo Joule  D.none of these

Description : The amount of heat required to raise the temperature of the unit mass of gas through one degree at constant volume, is called  A.specific heat at constant volume  B.specific heat at constant pressure  C.kilo Joule  D.none of these

Last Answer : Answer: A

What is defined as the quantity of heat needed to raise the temperature of one kilogram of water by one degrees Celsius?  a. Kilojoule  b. Btu  c. Kilocalorie  d. Latent heat

Description : What is defined as the quantity of heat needed to raise the temperature of one kilogram of water by one degrees Celsius?  a. Kilojoule  b. Btu  c. Kilocalorie  d. Latent heat

Last Answer : Kilocalorie

The compressibility factor, x, is used for predicting the behavior of nonideal gases. How is the compressibility ty factor defined relative to an ideal gas? (subscript “c”refers to critical value)  A. z = P / Pc  B. z = pV/ RT  C. z = T /Tc  D. z = RT / pV Hint: for an real gases the compressibility factor, x, is an dimensionless constant given by pV=zRT. Therefore z = pV / RT

Description : The compressibility factor, x, is used for predicting the behavior of nonideal gases. How is the compressibility ty factor defined relative to an ideal gas? (subscript c refers to critical value)  A. ... compressibility factor, x, is an dimensionless constant given by pV=zRT. Therefore z = pV / RT

Last Answer : z = pV/ RT

Defined as the ratio of weight of dry steam to the weight of stuff.  a. dryness fraction  b. Vaporization  c. fusion  d. super heated steam

Description : Defined as the ratio of weight of dry steam to the weight of stuff.  a. dryness fraction  b. Vaporization  c. fusion  d. super heated steam

Last Answer : dryness fraction

What is defined as the direct conversion of a substance from the solid to the vapor state or vice versa without passing the liquid state?  A. Condensation  B. Vaporization  C. Sublimation  D. Cryogenation

Description : What is defined as the direct conversion of a substance from the solid to the vapor state or vice versa without passing the liquid state?  A. Condensation  B. Vaporization  C. Sublimation  D. Cryogenation

Last Answer : Sublimation

What is defined as a process during which a fluid flows through a control volume steadily?  A. Transient-flow process  B. Steady and uniform process  C. Uniform-flow process  D. Steady-flow process

Description : What is defined as a process during which a fluid flows through a control volume steadily?  A. Transient-flow process  B. Steady and uniform process  C. Uniform-flow process  D. Steady-flow process

Last Answer : Steady-flow process

What is defined a region in space chosen for study?  A. Surroundings  B. System  C. Boundary  D. Volume

Description : What is defined a region in space chosen for study?  A. Surroundings  B. System  C. Boundary  D. Volume

Last Answer : System

Water boils when:  A. Its saturated vapor pressure equals to the atmospheric pressure  B. Its vapor pressure equals 76cm of mercury  C. Its temperature reaches 212 degree Celsius  D. Its vapor pressure is 1 gram per sq. cm

Description : Water boils when:  A. Its saturated vapor pressure equals to the atmospheric pressure  B. Its vapor pressure equals 76cm of mercury  C. Its temperature reaches 212 degree Celsius  D. Its vapor pressure is 1 gram per sq. cm

Last Answer : Its saturated vapor pressure equals to the atmospheric pressure

What is the SI unit of energy?  A. Newton  B. Btu  C. Calorie  D. Joule

Description : What is the SI unit of energy?  A. Newton  B. Btu  C. Calorie  D. Joule

Last Answer : Joule

What is the unit of the total energy of the system?  A. Kj  B. Kj/Kg  C. Kg  D. g

Description : What is the unit of the total energy of the system?  A. Kj  B. Kj/Kg  C. Kg  D. g

Last Answer : Kj

The unit of energy in S.I. units is  (a) watt  (b) joule  (c) joule/s  (d) joule/m  (e) joule m.

Description : The unit of energy in S.I. units is  (a) watt  (b) joule  (c) joule/s  (d) joule/m  (e) joule m.

Last Answer : Answer : b

The unit of power in S.I. units is  (a) newton  (b) pascal  (c) erg  (d) watt  (e) joule.

Description : The unit of power in S.I. units is  (a) newton  (b) pascal  (c) erg  (d) watt  (e) joule.

Last Answer : Answer : d

_________ is a measure of the average kinetic energy per molecule in a substance.  a. movement  b. temperature  c. heat  d. mass

Description : _________ is a measure of the average kinetic energy per molecule in a substance.  a. movement  b. temperature  c. heat  d. mass

Last Answer : temperature

The amount of heat energy per kilogram that must be added or removed when a substance changes from one phase to another.  a. specific heat  b. heat of expansion  c. latent heat  d. useful heat

Description : The amount of heat energy per kilogram that must be added or removed when a substance changes from one phase to another.  a. specific heat  b. heat of expansion  c. latent heat  d. useful heat

Last Answer : latent heat

The Product of the displacement of the body and the component if the force in the direction of the displacement.  a. Nonflow Work  b. Flow Work  c. Work  d. None of the above

Description : The Product of the displacement of the body and the component if the force in the direction of the displacement.  a. Nonflow Work  b. Flow Work  c. Work  d. None of the above

Last Answer : Work

It involves a force deforming a solid body  a. non-elastic work  b. non-flow work  c. flow work  d. elastic work

Description : It involves a force deforming a solid body  a. non-elastic work  b. non-flow work  c. flow work  d. elastic work

Last Answer : elastic work

What horse power is required to isothermally compress 800 ft^3 of Air per minute from 14.7 psia to 120 psia?  A. 28 hp  B.108 hp  C.256 hp  D.13900 hp Formula: W= p1V1 ln (p1/p2) Power = dW / dt

Description : What horse power is required to isothermally compress 800 ft^3 of Air per minute from 14.7 psia to 120 psia?  A. 28 hp  B.108 hp  C.256 hp  D.13900 hp Formula: W= p1V1 ln (p1/p2) Power = dW / dt

Last Answer : 108 hp

Ability to do work  a. Power  b. Energy  c. Work  d. None of the above

Description : Ability to do work  a. Power  b. Energy  c. Work  d. None of the above

Last Answer : Energy

What is an energy that can be transferred from one object to another causing a change in temperature of each object?  A. Power  B. Heat transfer  C. Heat  D. Work

Description : What is an energy that can be transferred from one object to another causing a change in temperature of each object?  A. Power  B. Heat transfer  C. Heat  D. Work

Last Answer : Heat

Water vapor at 100 KPa and 150°C is compressed isothermally until half the vapor has condensed. How much work must be performed on the steam in this compression process per kilogram?  a) -1384.7 kJ  b) 1384.7 kJ  c) -2384.7 kJ  d) 2384.7 kJ

Description : Water vapor at 100 KPa and 150°C is compressed isothermally until half the vapor has condensed. How much work must be performed on the steam in this compression process per kilogram?  a) -1384.7 kJ  b) 1384.7 kJ  c) -2384.7 kJ  d) 2384.7 kJ

Last Answer : -1384.7 kJ

Sum of the internal energy of a substance and the product of pressure and volume.  a. Specific Heat  b. Specific Gravity  c. Isolated System  d. Enthalpy

Description : Sum of the internal energy of a substance and the product of pressure and volume.  a. Specific Heat  b. Specific Gravity  c. Isolated System  d. Enthalpy

Last Answer : Enthalpy

The flow energy of 5 ft3 of a fluid passing a boundary to a system is 80,000 ft-lb. Determine the pressure at this point.  a. 222 psi  b. 333 psi  c. 444 psi  d. 111 psi formula: Ef= pV

Description : The flow energy of 5 ft3 of a fluid passing a boundary to a system is 80,000 ft-lb. Determine the pressure at this point.  a. 222 psi  b. 333 psi  c. 444 psi  d. 111 psi formula: Ef= pV

Last Answer : 111 psi