When gas changes to liquid through the process of condensation, the temperature
A] Increases.
B] Decreases
C] Remains constant.
D] None of the mentioned

1 Answer

Answer :

C] Remains constant.

Related questions

Description : In a condensation process, _______ to _________ A] Gas, Solid B] Gas, Liquid C] Liquid, Gas D] Liquid, Solid

Last Answer : B] Gas, Liquid

Description : When vapour is cooled at constant total system volume, the _______ changes. A] Volume. B] Pressure C] Temperature. D] None of the mentioned

Last Answer : B] Pressure

Description : The efficiency of the plant _____ with the mechanical draught a) Increases b) Decreases c) Remain constant d) None of the above

Last Answer : a) Increases

Description : Condensation starts ________ point. A] Dew point B] Bubble point C] Triple point D] None of the mentioned

Last Answer : A] Dew point

Description : When vapour is compressed isothermally the ____________ changes. A] Volume. B] Pressure C] Temperature D] None of the mentioned

Last Answer : A] Volume.

Description : The relative heat absorption for successively added equal areas of boiler convection heating surfaces__________ (A) Increases (B) Decreases (C) Remain unaffected (D) First increases and then decreases

Last Answer : (B) Decreases

Description : An economiser in a boiler........ A]Increases steam pressure. B]Increases steam flow C]Decreases fuel consumption D]Decreases steam pressure

Last Answer : C]Decreases fuel consumption

Description : Adiabatic process is (A) Essentially an isentropic process is___________ (B) Non-heat transfer process (C) Reversible process (D) Constant temperature process

Last Answer : (B) Non-heat transfer process

Description : If helium is introduced in a reactor containing O2 , SO2 and SO3 at equilibrium, so that total pressure increases while volume and temperature remains constant. In this case the dissociation of SO3 ( ... 's principle). (A) Decreases (B) Increases (C) Remains unaltered (D) Changes unpredictably

Last Answer : (A) Decreases

Description : When the bubbles of steam are produced? • Once the water reaches saturation temperature • Once the water starts evaporating • Once the temperature decreases • None of the above

Last Answer : • Once the water reaches saturation temperature

Description : The product of efficiency & heat transferred to the working fluid is? a. Net temperature change b. Net work done c. Net enthalpy change d. None of the mentioned

Last Answer : b. Net work done

Description : The velocity of the liquid flowing through the divergent portion of a Venturimeter (A) Remains constant (B) Increases (C) Decreases (D) Depends upon mass of liquid

Last Answer : Answer: Option C

Description : The pressure of the liquid flowing through the divergent portion of a Venturimeter (A) Remains constant (B) Increases (C) Decreases (D) Depends upon mass of liquid

Last Answer : Answer: Option C

Description : What happens when air dissolves in condensate? a) non corrosive b) temperature of air increases c) corrosive d) none of above

Last Answer : c) corrosive

Description : Choose the correct statement. (a) Electronegativity increases down a group (b) Electronegativity decreases down a group (c) Electronegativity decreases from left to right along a period (d) Electronegativity changes along a group, but remains constant along a period

Last Answer : Ans:(b)

Description : When humidity ratio of air ____ air is said to be dehumidified. A. increases B. decreases C. remains constant D. none of the mentioned

Last Answer : ANSWER : B

Description : Free energy, fugacity and activity co-efficient are all affected by change in the temperature. The fugacity co-efficient of a gas at constant pressure ____with the increase of reduced temperature. (A) Decreases (B) Increases (C) Remains constant

Last Answer : (B) Increases

Description : An ideal gas is compressed in a cylinder so well insulated that there is essentially no heat transfer. The temperature of gas  a. Remains constant  b. increases  c. decreases  d. is basically zero

Last Answer : increases

Description : In an isothermal process, the internal energy of gas molecules  (a) increases  (b) decreases  (c) remains constant  (d) may increase/decrease depending on the properties of gas  (e) shows unpredictable behaviour.

Last Answer : Answer : c

Description : Find false statement about effect of sulphur in fuel? (A) It has heating value (B) It helps in electrostatic precipitation of ash in flue gases (C) It leads to corrosion of air heaters, ducting, etc. if flue gas exit temperature is low (D) It erodes furnace walls

Last Answer : (D) It erodes furnace walls

Description : The economiser is used in boilers to........ A]Increase thermal efficiency of boiler B]Economise on fuel C]Extract heat from the exhaust the gases D]Increase flue gas temperature

Last Answer : A]Increase thermal efficiency of boiler

Description : Coefficient of consolidation for clays normally (A) Decreases with increase in liquid limit (B) Increases with increase in liquid limit (C) First increases and then decreases with increase in liquid limit (D) Remains constant at all liquid limits

Last Answer : (A) Decreases with increase in liquid limit

Description : Use of ______ is prohibited in process boilers. a. Use of a common gas b. combustion air control linkage c. jack shaft d. All of the above

Last Answer : d. All of the above

Description : Direct relation between…….. &………of saturated steam, the amount of energy input to process easy to control. a) volume, pressure b) volume, temperature c) temperature, pressure d) None of above

Last Answer : c) temperature, pressure

Description : Condensate is the liquid formed when steam passes from the ________ to the ______ state. a. Vapor, solid b. Solid, liquid c. Vapor, liquid d. None

Last Answer : c. Vapor, liquid

Description : The _______ system includes anywhere that the steam condenses to form liquid water. a. Loop b. Power c. Liquid d. Condensate

Last Answer : d. Condensate

Description : What is the function of boiler? • To burn the fuel in a confined closed system With the supply of air • To generate steam in varying pressure • To generate steam at constant pressure • To produce flue gases by burning fuel at a given pressure

Last Answer : • To generate steam at constant pressure

Description : With increase in the liquid flow rate at a fixed gas velocity in a randomly packed counter current gas-liquid absorption column, the gas pressure drop (A) Decreases (B) Remains unchanged (C) Increases (D) Decreases exponentially

Last Answer : (C) Increases

Description : Thermal conductivities of most of the liquids __________ with rise in temperature. (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the liquid

Last Answer : (B) Decreases

Description : The film thickness for laminar film condensation on vertical surface __________ from top to bottom. (A) Cumulatively increases (B) Cumulatively decreases (C) Remain constant (D) And the surface conductance increase

Last Answer : (A) Cumulatively increases

Description : Assuming all other parameters remain constant, what happens to the pressure of a gas when the volume of the gas is increased? w) increases x) decreases y) fluctuates sinusoidally z) remains the same

Last Answer : ANSWER: X -- DECREASES

Description : As the temperature of ice rises, the ice melts and its density _____. A. Decreases B. Remains constant C. Increases D. Increases upto 10 °C

Last Answer : ANSWER: C

Description : As the temperature of ice rises, the ice melts and its density _____. A. Decreases B. Remains constant C. Increases D. Increases upto 10 °C

Last Answer : ANSWER: C

Description : As the temperature of ice rises, the ice melts and its density _____. A. Decreases B. Remains constant C. Increases D. Increases upto 10 °C

Last Answer : ANSWER: C

Description : At boiling point of liquids, its – (1) Temperature increases (2) Atmospheric pressure increases (3) Temperature remains constant (4) Vapour pressure decreases

Last Answer : (3) Temperature remains constant Explanation: An interesting property of matter is that its temperature remains constant during a phase change, assuming its surrounding pressure is constant. A liquid changes into gaseous state at a constant temperature called its boiling point.

Description : If the temperature of a piece increases suddenly, the relative humidity– (1) increases (2) decreases (3) remains constant (4) fluctuates

Last Answer : (2) decreases Explanation: Relative humidity is the ratio of the partial pressure of water vapour in a airwater mixture to the saturated vapour pressure of water at a specific temperature.

Description : If the temperature of a place increases suddenly, the relative humidity – (1) Increases (2) Decreases (3) Remains constant (4) Fluctuates

Last Answer : (2) Decreases Explanation: Relative humidity is the ratio of the partial pressure of water vapor in an airwater mixture to the saturated vapor pressure of water at a prescribed ... of the system decreases because the saturated vapor pressure of water increases with increasing temperature.

Description : With increase in absolute humidity, the dew point of an unsaturated mixture of air and water vapor (at constant pressure and temperature). (A) Increases (B) Remains unchanged (C) Decreases (D) Decreases linearly

Last Answer : (A) Increases

Description : During sensible cooling of air, its wet bulb temperature (A) Decreases but dew point remains constant (B) Increases but dew point remains constant (C) Increases & the dew point decreases (D) Decreases & the dew point increases

Last Answer : (B) Increases but dew point remains constant

Description : On a day when the partial pressure of water vapor remains constant, what happens as the temperature rises?  a. the relative humidity increases  b. the relative humidity decreases  c. the relative humidity remains constant  d. the air would eventually become saturated

Last Answer : the relative humidity decreases

Description : The volume of a given amount of water _________ as the temperature decreases from 4˚C to 0˚C.  a. decreases  b. increases  c. remains constant  d. none of the above

Last Answer : increases

Description : The conductivity of an extrinsic semiconductor (A) decreases with temperature. (B) increases with temperature. (C) remains constant with temperature. (D) decreases and then increases with temperature.

Last Answer : (B) increases with temperature.

Description : At boiling point of liquids, its (1) Temperature increases (2) Atmospheric pressure increases (3) Temperature remains constant (4) Vapour pressure decreases 

Last Answer : Temperature remains constant

Description : If the temperature of a place increases suddenly, the relative humidity (1) Increases (2) Decreases (3) Remains constant (4) Fluctuates

Last Answer : Decreases

Description : In sensible cooling process the relative humidity: A. decreases B. increases C. remains constant D. none of the above

Last Answer : ANSWER : B

Description : The entropy __________ in an irreversible cyclic process.  A. remains constant  B. decreases  C. increases

Last Answer : Answer: C

Description : In an isothermal process, the internal energy  (a) increases  (b) decreases  (c) remains constant  (d) first increases and then decreases  (e) first decreases and then increases.

Last Answer : Answer : c

Description : In a heat exchanger with steam outside the tubes, a liquid gets heated to 45°C, when its flow velocity in the tubes is 2 m/s. If the flow velocity is reduced to 1 m/s, other things remaining ... than 45°C (B) More than 45°C (C) Equal to 45°C (D) Initially decreases and remains constant thereafter

Last Answer : (B) More than 45°C

Description : Based on the exhaust gas analysis, a controller maintains stoichiometric combustion __ a. by commanding a servo motor to adjust the combustion air damper b. By commanding servo motor to adjust the fuel supply valve. c. Both a. & b. d. None of the above.

Last Answer : c. Both a. & b.

Description : Oxygen trim control strategy __ a. continuously measures the oxygen content in the flue gas b. adjusts the combustion air flow c. Continually tuning the air-fuel mixture. d. All of above

Last Answer : d. All of above