Deaeration of high pressure boiler feed water is done to reduce (A) Foaming from boilers (B) Its dissolved oxygen content (C) Its silica content (D) Caustic embrittlement

Deaeration of high pressure boiler feed water is done to reduce
(A) Foaming from boilers
(B) Its dissolved oxygen content
(C) Its silica content
(D) Caustic embrittlement
by

1 Answer

Answer :

(B) Its dissolved oxygen content
by

Related questions

Pick out the wrong statement. (A) Caustic embrittlement of boiler's metallic parts is caused by highconcentration of caustic soda in boiler feed water(B) Cooling and freezing of water kills the bacteria present in it(C) With increasing boiler operating pressure of steam, the maximumallowable concentration of silica in feed water goes on decreasing(D) Dissolved oxygen content in high pressure boiler feed water should benil

Description : Pick out the wrong statement. (A) Caustic embrittlement of boiler's metallic parts is caused by highconcentration of caustic soda in boiler feed water (B) Cooling and freezing of water kills the ... goes on decreasing (D) Dissolved oxygen content in high pressure boiler feed water should be nil

Last Answer : (B) Cooling and freezing of water kills the bacteria present in it

Tri-sodium phosphate is used in boiler water treatment to reduce (A) Turbidity (B) Caustic embrittlement (C) Suspended silica (D) Dissolved oxygen

Description : Tri-sodium phosphate is used in boiler water treatment to reduce (A) Turbidity (B) Caustic embrittlement (C) Suspended silica (D) Dissolved oxygen

Last Answer : (B) Caustic embrittlement

Which of the following is not a result of the excess of impurity in boiler-feed. a) Scale and sludge formation b) Decomposition c) Corrosion, priming and foaming d) Caustic embrittlement

Description : Which of the following is not a result of the excess of impurity in boiler-feed. a) Scale and sludge formation b) Decomposition c) Corrosion, priming and foaming d) Caustic embrittlement

Last Answer : b) Decomposition

The phenomenon during which the boiler material becomes brittle due to accumulation of caustic substances is known as ___________ a) Foaming b) Priming c) Corrosion d) Caustic embrittlement

Description : The phenomenon during which the boiler material becomes brittle due to accumulation of caustic substances is known as ___________ a) Foaming b) Priming c) Corrosion d) Caustic embrittlement

Last Answer : d) Caustic embrittlement

Which of the following impurities in feed water for high pressure boiler is the most detrimental? (A) Silica (B) Dissolved oxygen (C) Suspended salt (D) Dissolved salt

Description : Which of the following impurities in feed water for high pressure boiler is the most detrimental? (A) Silica (B) Dissolved oxygen (C) Suspended salt (D) Dissolved salt

Last Answer : (A) Silica

The propulsion of water into steam drum by extremely rapid, almost explosive boiling of water at the heating surface is called ___________ a) Foaming b) Priming c) Corrosion d) Caustic embrittlement

Description : The propulsion of water into steam drum by extremely rapid, almost explosive boiling of water at the heating surface is called ___________ a) Foaming b) Priming c) Corrosion d) Caustic embrittlement

Last Answer : b) Priming

Corrosion in boilers can be prevented by (A) Deaeration of feed water (B) Enhancing pH of feed water by adding alkali (C) Feeding sodium sulphite or hydrazine phosphate to the boilers, which combines with oxygen and prevents corrosion (D) All (A), (B) and (C)

Description : Corrosion in boilers can be prevented by (A) Deaeration of feed water (B) Enhancing pH of feed water by adding alkali (C) Feeding sodium sulphite or hydrazine phosphate to the boilers, which combines with oxygen and prevents corrosion (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The most detrimental impurity in high pressure boiler feed water is (A) Suspended salt (B) Dissolved salt (C) Silica (D) Turbidity

Description : The most detrimental impurity in high pressure boiler feed water is (A) Suspended salt (B) Dissolved salt (C) Silica (D) Turbidity

Last Answer : Option C

Which of the following is the most detrimental for water used in high pressure boiler? (A) Silica (B) Turbidity (C) Phenol(D) Dissolved oxygen

Description : Which of the following is the most detrimental for water used in high pressure boiler? (A) Silica (B) Turbidity (C) Phenol (D) Dissolved oxygen

Last Answer : (A) Silica

Foaming and priming in boiler operation can be reduced by reduction in __________ in feed water. (A) Turbidity (B) Color (Hazen) (C) Total solids (D) All (A), (B) & (C)

Description : Foaming and priming in boiler operation can be reduced by reduction in __________ in feed water. (A) Turbidity (B) Color (Hazen) (C) Total solids (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Steam condensate is recovered by steam traps and recycled for use as boiler feed water, because of its low (A) Hardness (B) Dissolved solids content (C) Suspended solids content (D) All (A), (B) and (C)

Description : Steam condensate is recovered by steam traps and recycled for use as boiler feed water, because of its low (A) Hardness (B) Dissolved solids content (C) Suspended solids content (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following is an example of stress corrosion? (A) Season cracking of brass (B) Caustic embrittlement of steel (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Which of the following is an example of stress corrosion? (A) Season cracking of brass (B) Caustic embrittlement of steel (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : Option C

What is caustic embrittlement ?

Description : What is caustic embrittlement ?

Last Answer : It is the actual physical change in metal that makes it extremely brittle and filled with minute cracks. It occurs particularly in the seams of rivetted joints and around the rivet holes.

Use of water having dissolved oxygen in boilers promotes (A) Corrosion (B) Sequestration (C) Scale formation(D) None of these

Description : Use of water having dissolved oxygen in boilers promotes (A) Corrosion (B) Sequestration (C) Scale formation (D) None of these

Last Answer : (A) Corrosion

Scale formation in boiler is controlled by (A) Preheating of feed water (B) Reduction in hardness, silica & alumina in feed water (C) Keeping the pH value of feed water just below 7 (D) Eliminating H2S in feed water

Description : Scale formation in boiler is controlled by (A) Preheating of feed water (B) Reduction in hardness, silica & alumina in feed water (C) Keeping the pH value of feed water just below 7 (D) Eliminating H2S in feed water

Last Answer : (B) Reduction in hardness, silica & alumina in feed water

Soluble silica present in boiler feed water can be removed by (A) Coagulation (B) Filtration (C) Anion exchanger (D) Preheating it

Description : Soluble silica present in boiler feed water can be removed by (A) Coagulation (B) Filtration (C) Anion exchanger (D) Preheating it

Last Answer : (C) Anion exchanger

Limestone powder is injected during pulverised coal burning in boilers to __________ the flue gases. (A) Reduce SO2 content in (B) Catalytically convert SO2 to SO3 in (C) Increase the dew point of (D) None of these

Description : Limestone powder is injected during pulverised coal burning in boilers to __________ the flue gases. (A) Reduce SO2 content in (B) Catalytically convert SO2 to SO3 in (C) Increase the dew point of (D) None of these

Last Answer : (A) Reduce SO2 content in

Deaeration (removal of O2 ) of water is done by (A) Rectification (B) Absorption (C) Ion-exchange (D) Adsorption

Description : Deaeration (removal of O2 ) of water is done by (A) Rectification (B) Absorption (C) Ion-exchange (D) Adsorption

Last Answer : (C) Ion-exchange

The detrimental effect on organism and water quality with temperature rise of aquatic system is the reduction of __________ of water. (A) Dissolved oxygen content (B) Biological oxygen demand (C) Vapor pressure (D) All (A), (B) and (C)

Description : The detrimental effect on organism and water quality with temperature rise of aquatic system is the reduction of __________ of water. (A) Dissolved oxygen content (B) Biological oxygen demand (C) Vapor pressure (D) All (A), (B) and (C)

Last Answer : (A) Dissolved oxygen content

To reduce the stack loss, heat recovery from flue gas can be done by (A) Preheating of cold stock (B) Preheating of combustion air (C) Steam generation in waste heat boilers (D) All (A), (B) and (C)

Description : To reduce the stack loss, heat recovery from flue gas can be done by (A) Preheating of cold stock (B) Preheating of combustion air (C) Steam generation in waste heat boilers (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The temperature of boiling water in a steam engine may be high because - (1) there are dissolved substances in water (2) there is low pressure inside the boiler (3) there is high pressure inside the boiler (4) the lire is at very high temperature

Description : The temperature of boiling water in a steam engine may be high because - (1) there are dissolved substances in water (2) there is low pressure inside the boiler (3) there is high pressure inside the boiler (4) the lire is at very high temperature

Last Answer : (3) there is high pressure inside the boiler Explanation: In the boiler of a steam engine, there is a firebox where coal is shoveled into. The coal is kept burning at a very high temperature, and ... reservoir; the steam is then controlled by a slide valve to move into a cylinder to push the piston.

The temperature of boiling water in a steam engine may be high because : (1) there are dissolved substances in water (2) there is low pressure inside the boiler (3) there is high pressure inside the boiler (4) the fire is at very high temperature

Description : The temperature of boiling water in a steam engine may be high because : (1) there are dissolved substances in water (2) there is low pressure inside the boiler (3) there is high pressure inside the boiler (4) the fire is at very high temperature

Last Answer :  there is high pressure inside the boiler

Find false statement a. Tube of supercritical boilers are self-supporting b. Corners are easy to form c. Uniform heating of water takes place in supercritical boiler occurs d. All

Description : Find false statement a. Tube of supercritical boilers are self-supporting b. Corners are easy to form c. Uniform heating of water takes place in supercritical boiler occurs d. All

Last Answer : c. Uniform heating of water takes place in supercritical boiler occurs

Differentiate water tube boiler and fire tube boilers

Description : Differentiate water tube boiler and fire tube boilers

Last Answer : Sr. No. Parameter Water tube boiler Fire tube boiler 1 Medium in tube  Water is circulated in tube and hot gases passed over the tube Hot gases are circulated through the ... 8 Example Babcock & Wilcox boiler, Loeffler Boiler Cochran Boiler, Lancashire boiler

20 gram of caustic soda are dissolved in water to prepare 500 ml of solution. Find the normality and molarity of solution.

Description : 20 gram of caustic soda are dissolved in water to prepare 500 ml of solution. Find the normality and molarity of solution.

Last Answer : Basis: 500 ml solution. Weight of solute = 20 gm Molecular weight of NaOH = 40 Gram moles of solute = 20/40 = 0.5 Molarity = Gram moles/ Volume of solution in lit  0.5/0.5 = 1 M Normality = gram equivalent of solute/ volume of solution in lit  = 0.5/0.5 = 1N 

What is the major disadvantage of the Benson boilers? a) Boiler is big in size b) Has large storage capacity c) Deposition of salts d) Bubble formation

Description : What is the major disadvantage of the Benson boilers? a) Boiler is big in size b) Has large storage capacity c) Deposition of salts d) Bubble formation

Last Answer : c) Deposition of salts

The economiser is used in boilers to........ A]Increase thermal efficiency of boiler B]Economise on fuel C]Extract heat from the exhaust the gases D]Increase flue gas temperature

Description : The economiser is used in boilers to........ A]Increase thermal efficiency of boiler B]Economise on fuel C]Extract heat from the exhaust the gases D]Increase flue gas temperature

Last Answer : A]Increase thermal efficiency of boiler

State regulations for boilers which fall under IBR boiler

Description : State regulations for boilers which fall under IBR boiler

Last Answer : Boiler Regulations : 1. A boiler cannot be put to use unless it has been registered with the Chief Inspector of Boilers. 2. The maximum working pressure of the boiler has to be ... Accident inspection, Casual inspection 8. Violation of law is liable to prosecution and punishment with fine.

. Presence of iron and manganese in water causes (A) Reduction in its dissolved oxygen content (B) Discoloration of bathroom fixtures (C) Temporary hardness (D) None of these

Description : . Presence of iron and manganese in water causes (A) Reduction in its dissolved oxygen content (B) Discoloration of bathroom fixtures (C) Temporary hardness (D) None of these

Last Answer : (B) Discoloration of bathroom fixtures

The best guide to judge the general quality of water is the measurement of its (A) pH value (B) Electrical conductivity (C) Turbidity (D) Dissolved oxygen content

Description : The best guide to judge the general quality of water is the measurement of its (A) pH value (B) Electrical conductivity (C) Turbidity (D) Dissolved oxygen content

Last Answer : (B) Electrical conductivity

How dissolved oxygen control is achieved in feed water system?

Description : How dissolved oxygen control is achieved in feed water system?

Last Answer : Hydrazine is added to feed water system to control dissolved oxygen.  

Dilution method of disposing of sewage, is not preferred to A. When sewage is fresh B. When diluting water has high dissolved oxygen content C. When diluting water is used for water supply near the point of sewage disposed D. When the diluting water is having flow currents

Description : Dilution method of disposing of sewage, is not preferred to A. When sewage is fresh B. When diluting water has high dissolved oxygen content C. When diluting water is used for water supply near the point of sewage disposed D. When the diluting water is having flow currents

Last Answer : ANS: C

Dissolved oxygen content in river water is around __________ ppm. (A) 5 (B) 100 (C) 250 (D) 500

Description : Dissolved oxygen content in river water is around __________ ppm. (A) 5 (B) 100 (C) 250 (D) 500

Last Answer : (A) 5

For existence of aquatic life in water, the dissolved oxygen content in it, should not be less than __________ ppm. (A) 10000 (B) 5 (C) 500 (D) 1000

Description : For existence of aquatic life in water, the dissolved oxygen content in it, should not be less than __________ ppm. (A) 10000 (B) 5 (C) 500 (D) 1000

Last Answer : (B) 5

Presence of carbonaceous matter in the sewage (A) Causes reduction in its dissolved oxygen content thereby endangering the life of aquatic creatures (B) Reduces sulphate ions to sulphides causing obnoxious smell (C) Increases the quantity of chlorine used for its purification (D) All (A), (B) and (C)

Description : Presence of carbonaceous matter in the sewage (A) Causes reduction in its dissolved oxygen content thereby endangering the life of aquatic creatures (B) Reduces sulphate ions to sulphides causing obnoxious ... quantity of chlorine used for its purification (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The delivery pressure of boiler feed water pump compared to the boiler steam pressure is (A) Same (B) Slightly less (C) Slightly more (D) Much more

Description : The delivery pressure of boiler feed water pump compared to the boiler steam pressure is (A) Same (B) Slightly less (C) Slightly more (D) Much more

Last Answer : (C) Slightly more

Deaeration of water in its treatment is necessary, as it (A) Minimises its turbidity (B) Helps in controlling its taste and odour (C) Minimises its corrosiveness (D) None of these

Description : Deaeration of water in its treatment is necessary, as it (A) Minimises its turbidity (B) Helps in controlling its taste and odour (C) Minimises its corrosiveness (D) None of these

Last Answer : (C) Minimises its corrosiveness

Sodium bisulphite is used for __________ water. (A) Deaeration (B) Dechlorination (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Sodium bisulphite is used for __________ water. (A) Deaeration (B) Dechlorination (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Chlorination of water does not remove (A) Ammonia content (B) B.O.D. (C) Organic matter content (D) Dissolved oxygen

Description : Chlorination of water does not remove (A) Ammonia content (B) B.O.D. (C) Organic matter content (D) Dissolved oxygen

Last Answer : (D) Dissolved oxygen

Presence of SO2 in furnace gases attacks the ferrous metal by way of (A) Accelerating the rate of scaling (B) Causing metal embrittlement (C) Attacking the grain boundaries; particularly severe on low carbon and nickel bearing steels at high temperature (D) All (A), (B) and (C)

Description : Presence of SO2 in furnace gases attacks the ferrous metal by way of (A) Accelerating the rate of scaling (B) Causing metal embrittlement (C) Attacking the grain boundaries; particularly severe on low carbon and nickel bearing steels at high temperature (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Presence of high concentration of ozone and smog in atmospheric air causes the(A) Embrittlement & decrease of folding resistance of paper(B) Cracking of rubber products(C) Fading of dye on textiles(D) Damage of electrical insulator on high tension power line

Description : Presence of high concentration of ozone and smog in atmospheric air causes the (A) Embrittlement & decrease of folding resistance of paper (B) Cracking of rubber products (C) Fading of dye on textiles (D) Damage of electrical insulator on high tension power line

Last Answer : (B) Cracking of rubber products

Sunlight (A) Helps growth of bacterias (B) Impedes growth of algae (C) Increases dissolved oxygen content (D) Reduces turb

Description : Sunlight  (A) Helps growth of bacterias  (B) Impedes growth of algae  (C) Increases dissolved oxygen content  (D) Reduces turb

Last Answer : (B) Impedes growth of algae

In case of evaporators, liquid entrainment results primarily due to (A) High vacuum in the evaporator (B) High evaporation rate (C) Foaming of the solution (D) High heat transfer rate

Description : In case of evaporators, liquid entrainment results primarily due to (A) High vacuum in the evaporator (B) High evaporation rate (C) Foaming of the solution (D) High heat transfer rate

Last Answer : (C) Foaming of the solution

In steam and other vapour cycles, the process of removing noncondensable is called [GATE-1992] (a) Scavenging process (b) Deaeration process (c) Exhaust process (d) Condensation process

Description : In steam and other vapour cycles, the process of removing noncondensable is called [GATE-1992] (a) Scavenging process (b) Deaeration process (c) Exhaust process (d) Condensation process  

Last Answer : (b) Deaeration process  

Very high pressure boilers are usually __________ boilers. (A) Fire tube (B) Water tube (C) Waste heat (D) Natural circulation

Description : Very high pressure boilers are usually __________ boilers. (A) Fire tube (B) Water tube (C) Waste heat (D) Natural circulation

Last Answer : (D) Natural circulation

Presence of nitrogen and phosphorous in waste water discharged into lakes and ponds causes (A) Foaming(B) Odour nuisances(C) Undesirable plant growth(D) Turbidity

Description : Presence of nitrogen and phosphorous in waste water discharged into lakes and ponds causes (A) Foaming (B) Odour nuisances (C) Undesirable plant growth (D) Turbidity

Last Answer : (C) Undesirable plant growth

Boiler feed water pump is usually a __________ pump.(A) Reciprocating (B) Gear (C) Multistage centrifugal (D) Diaphragm

Description : Boiler feed water pump is usually a __________ pump. (A) Reciprocating (B) Gear (C) Multistage centrifugal (D) Diaphragm

Last Answer : (C) Multistage centrifugal

In the context of the chemical process industries, the term BOD is normally associated with the (A) Characterisation of solid wastes (B) Organic concentration in gaseous effluents (C) Characterisation of liquid effluents (D) Characterisation of boiler feed water

Description : In the context of the chemical process industries, the term BOD is normally associated with the (A) Characterisation of solid wastes (B) Organic concentration in gaseous effluents (C) Characterisation of liquid effluents (D) Characterisation of boiler feed water

Last Answer : (C) Characterisation of liquid effluents

Widely used method for the conditioning of boiler feed water is the (A) Cold lime process (B) Coagulation (C) Hot-lime soda process (D) Sequestration

Description : Widely used method for the conditioning of boiler feed water is the (A) Cold lime process (B) Coagulation (C) Hot-lime soda process (D) Sequestration

Last Answer : (C) Hot-lime soda process

The most prominent single cause of corrosion in boiler-tubes, drums, economisers and steam superheaters in a thermal power plant boiler is the (A) Water alkalinity & leakage (B) Hydrazine addition during feed water treatment (C) Release of non-condensable gas from water in the boiler (D) Scale formation

Description : The most prominent single cause of corrosion in boiler-tubes, drums, economisers and steam superheaters in a thermal power plant boiler is the (A) Water alkalinity & leakage (B) Hydrazine addition during ... treatment (C) Release of non-condensable gas from water in the boiler (D) Scale formation

Last Answer : (C) Release of non-condensable gas from water in the boiler