The wedge shaped bricks forming an arch ring, are called
(A) Soffits
(B) Voussoirs
(C) Haunches
(D) Spandrils

1 Answer

Answer :

Option B

Related questions

Description : The wedge shaped bricks forming an arch ring, are called (A) Soffits (B) Voussoirs (C) Haunches (D) Spandrils

Last Answer : Option B

Description : An arch may fail due to (A) Uneven settlement of abutments (B) Sliding of voussoirs (C) Crushing of the material (D) All the above

Last Answer : Answer: Option D

Description : The triangular space formed between the extrados and the horizontal line drawn through the crown of an arch is known as (A) Haunch (B) Spandril (C) Voussoirs (D) Skewbacks

Last Answer : Answer: Option B

Description : The valve fitted closely in a recess against an opening in a pipe, is generally (A) Wedge shaped circular disc (B) Spherical disc (C) Parallelepiped disc (D) Conical shaped circular disc

Last Answer : (A) Wedge shaped circular disc

Description : Under normal conditions using an ordinary cement, the period of removal of the form work, is: (A) 7 days for beam soffits (B) 14 days for bottom slabs of spans 4.6 m and more (C) 21 days for bottom beams over 6 m spans (D) All the above

Last Answer : Answer: Option D

Description : The vertical members fixed between steps and hand rail, are known (A) Balusters (B) Strings (C) Newel posts (D) Soffits

Last Answer : Answer: Option A

Description : A constant centre (in plan-view) arch dam is best suited for: a) A V- shaped gorge b) A U- shaped gorge c) Both U- and V- shaped gorges d) multi- peaked gorges

Last Answer : a) A V- shaped gorge

Description : Which one of the following is correct? [IES-2008] A hydrodynamic slider bearing develops load bearing capacity mainly because of- (a) Slider velocity (b) wedge shaped oil film (c) Oil compressibility (d) oil viscosity

Last Answer : (b) wedge shaped oil film

Description : For elasto-hydrodynamic lubrication (A) There should be relative motion between the surfaces of the journal and the bearing and wedge shaped clearance space (B) There should be external source like ... be elastic deformation of the parts in contact (D) There should be metal to metal contact

Last Answer : (C) There should be elastic deformation of the parts in contact

Description : For hydrostatic lubrication (A) There should be relative motion between the surfaces of the journal and the bearing and wedge shaped clearance space (B) There should be external source like pump to ... be elastic deformation of the parts in contact (D) There should be metal to metal contact

Last Answer : (B) There should be external source like pump to supply lubricant under pressure

Description : For hydrodynamic lubrication (A) There should be relative motion between the surfaces of the journal and the bearing and wedge shaped clearance space (B) There should be external source like pump to ... be elastic deformation of the parts in contact (D) There should be metal to metal contact

Last Answer : (A) There should be relative motion between the surfaces of the journal and the bearing and wedge shaped clearance space

Description : The ridger has—- Shaped or —— shaped share fitted to the frog A. V, Wedge. C. U, wedge B. None of the above D. Both A and C

Last Answer : Both A and C

Description : Interference pattern is observed in wedge-shaped film for monochromatic light. Now monochromatic light is replaced by white light. What will be the effect on interference pattern? (a) It will turn to dark (b) It will turn to bright (c) Bands will disappear (d) It will be a mixture of all colors

Last Answer : (d) It will be a mixture of all colors

Description : Interference pattern is observed in wedge-shaped film and bandwidth is noted. Now the angle of wedge is reduced to zero. What will be the effect on Bandwidth? (a) Bandwidth increases (b) Bandwidth decreases (c) Bands will disappear (d) There will not any effect

Last Answer : (c) Bands will disappear

Description : Interference pattern is observed in wedge-shaped film and bandwidth is noted. Now the angle of wedge is reduced. What will be the effect on bandwidth? (a) Bandwidth increases (b) Bandwidth decreases (c) Bands will disappear (d) There will not any effect

Last Answer : B) BANDWIDTH DECREASES

Description : Interference pattern is observed in wedge-shaped film and bandwidth is noted. Now the thin film is replaced by the film of higher refractive index. What will be the effect on bandwidth? (a) Bandwidth increases (b) Bandwidth decreases (c) Bands will merge (d) There will not any effect

Last Answer : (b) Bandwidth decreases

Description : What is the nature of interference pattern for thin film of wedge shaped (a) Concave outside (b) Convex outside (b) Equally spaced (d) Concave inside

Last Answer : (b) Convex outside

Description : What is the nature of interference pattern at the contact edge of wedge shaped film (a) Always bright (b) Always dark (c) Bright or dark depending upon the thickness of other end (d) Bright or dark depending upon the wavelength of the light

Last Answer : (b) Always dark

Description : In wedge shaped film the interference pattern has nature (a) Parallel to the end where thickness is non-zero (b) Perpendicular to contact edge (c) Parallel to contact edge (d) Perpendicular to the end where thickness is non-zero

Last Answer : (c) Parallel to contact edge

Description : A wedge shaped thin has (a) Non-uniform thickness (b) Zero thickness at one end and it increasing towards other end (c) Zero thickness at both ends (d) Thickness increase and decrease alternately

Last Answer : b) Zero thickness at one end and it increasing towards other end

Description : What is the nature of interference pattern for thin film of wedge shaped A. Concave outside B. Convex outside C. Equally spaced D. Concave inside

Last Answer : B. Convex outside

Description : A wedge shaped thin has A. Non-uniform thickness B. Zero thickness at one end and it increasing towards other end C. Zero thickness at both ends D. Thickness increase and decrease alternately

Last Answer : B. Zero thickness at one end and it increasing towards other end

Description : Which solar feature is shaped like an arch?

Last Answer : A solar flare arches up from the surface of the sun.

Description : The theodolites used for making tacheometric observations by optical wedge system, are (A) Provided with stadia hairs in front of eye piece (B) Not provided with stadia hairs at all (C) Fitted with a glass wedge inside the telescope (D) Fitted with a glass wedge in front of telescope

Last Answer : (D) Fitted with a glass wedge in front of telescope

Description : Pick up the correct statement from the following: (A) When water table is above the base of a footing, the dry weight m should be used for soil below water table (B) When water table is located ... water table is just at the base of the footing, no reduction factor is used (D) None of these

Last Answer : (B) When water table is located somewhat below the base of a footing, the elastic wedge is partly of moist soil and partly of submerged soil, and a suitable reduction factor is used

Description : Coulomb's wedge theory assumes that (A) Back fill is dry, cohesionless, homogeneous and isotropic (B) Slip surface is the plane which passes through the heel of the wall (C) Position and direction of the resultant earth pressure are known (D) All the above

Last Answer : (D) All the above

Description : A failure wedge develops if a retaining wall (A) Moves away from the backfill (B) Moves towards the backfill (C) Sinks downwards (D) Stresses equally by vertical and horizontal forces

Last Answer : Answer: Option A

Description : According to Coulomb's wedge theory, the active earth pressure slides the wedge (A) Down and outwards on a slip surface (B) Up and inwards on a slip surface (C) Horizontal upward and parallel to base (D) Horizontal inward and parallel to base

Last Answer : Answer: Option A

Description : Consider the following statements regarding Coulomb's theory of earth pressure: 1. It is based on wedge theory of earth pressure. 2. It assumes the wall surface to be rough. 3. It may or may not satisfy the static equilibrium condition ... 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (b) 1 & 2 only

Description : $ In prokaryotes, there is present a ring shaped chromosome. ! The ring shaped chromosome is called Eukaryotic Nucleus.

Last Answer : $ In prokaryotes, there is present a ring shaped chromosome. ! The ring shaped chromosome is called Eukaryotic ... D. If both As and R are wrong.

Description : While playing with a metal washer shaped like a ring, Dave accidently pushed it on his finger too far and couldn't get it off. Trying to remove it using soap and water didn't work. The hospital ... and suggested an easy way to remove the washer in just a few minutes. What was his solution? -Riddles

Last Answer : Bob suggested that Dave hold his finger in the air while someone wound a piece of string tightly around his finger just above the metal ring. The string forced the swelling down. As they ... the ring up. They continued winding and unwinding the string until the ring could be easily removed.

Description : Write the name and structure of a saturated compound in which the carbon atoms are shaped in a ring. Also write the number of bonds present in that compound? -SST 10th

Last Answer : It’s cyclo alkane, it can be any cyclo alkane like cyclo pentane or cyclo hexane.

Description : The C shaped ring of trachea and bronchi are made of

Last Answer : cartilage.

Description : State weather the following statement is true or false for Token Bus 1).It is a linear or tree- shaped cable onto which the stations are attached. 2). the token propagates around the logical ring, with only the token holder ... 3. false C. 1. false, 2. false, 3. false D. 1. true, 2. true, 3. false

Last Answer : D. 1. true, 2. true, 3. false

Description : The under surface of an arch, is called (A) Soffit (B) Intrados (C) Haunch (D) Back

Last Answer : Answer: Option A

Description : The lower half portion between crown and skew back of the arch, is called (A) Spandril (B) Haunch (C) Springing (D) Soffit

Last Answer : Answer: Option B

Description : The vertical reaction for the arch is  (A) wa/2l (B) wl/a (C) wa/l (D) wa²/2

Last Answer : (A) wa/2l

Description : The horizontal deflection of a parabolic curved beam of span 10 m and rise 3 m when loaded with  a uniformly distributed load l t per horizontal length is (where Ic  is the M.I. at the crown, which  varies as the slope ... arch).  (A) 50/EIc (B) 100/EIc (C) 150/EIc (D) 200/E

Last Answer : (D) 200/E

Description : A three hinged arch is generally hinged at its supports and  (A) At one quarter span  (B) At the crown  (C) Anywhere in the rib  (D) None of these 

Last Answer : (C) Anywhere in the rib 

Description : The locus of reaction of a two hinged semi-circular arch, is  (A) Straight line  (B) Parabola  (C) Circle  (D) Hyperbola 

Last Answer : (A) Straight line 

Description : For determining the support reactions at A and B of a three hinged arch, points B and Care joined  and produced to intersect the load line at D and a line parallel to the load line through A at D'.  Distances AD, DD ... reactions at A and B is  (A) 30°  (B) 45°  (C) 60°  (D) 90

Last Answer : (D) 90

Description : The equation of a parabolic arch of span and rise , is given by  (A) y = h/l² × (1 - x)  (B) y = 2h/l² × (1 - x)  (C) y = 3h/l² × (1 - x)  (D) y = 4h/l² × (1 - x) 

Last Answer : (D) y = 4h/l² × (1 - x) 

Description : An isolated load W is acting at a distance a from the left hand support, of a three hinged arch of  span 2l and rise h hinged at the crown, the horizontal reaction at the support, is  (A) Wa/h  (B) Wa/2h (C) 2W/ha (D) 2h/W

Last Answer : (B) Wa/2h

Description : If a three hinged parabolic arch, (span l, rise h) is carrying a uniformly distributed load w/unit  length over the entire span,  (A) Horizontal thrust is wl2 /8h (B) S.F. will be zero throughout  (C) B.M. will be zero throughout  (D) All the above 

Last Answer : (D) All the above 

Description : Pick up the correct statement from the following: (A) The tangent screw enables to give small movement under conditions of smooth and positive control (B) Standing on the tripod is the levelling head ... used to tilt the instrument so that its rotation axis is truly vertical (D) All the above

Last Answer : (D) All the above

Description : For a symmetrical two hinged parabolic arch, if one of the supports settles horizontally, then the horizontal thrust (A) Is increased (B) Is decreased (C) Remains unchanged (D) Becomes zero

Last Answer : (B) Is decreased

Description : For a two-hinged arch, if one of the supports settles down vertically, then the horizontal thrust (A) Is increased (B) Is decreased (C) Remains unchanged (D) Becomes zero

Last Answer : (C) Remains unchanged

Description : In a three hinged arch, the bending moment will be zero (A) At right hinge only (B) At left hinge only (C) At both right and left hinges (D) At all the three hinges

Last Answer : (D) At all the three hinges

Description : The rise of a parabolic arch at quarter points, is equal to (A) 1/3 times the rise of the crown (B) 1/4 times the rise of the crown (C) 1/2 times the rise of the crown (D) 3/4 times the rise of the crown

Last Answer : (D) 3/4 times the rise of the crown

Description : A three hinged arch is loaded with an isolated load 1000 kg at a horizontal distance of 2.5 m from the crown, 1 m above the level of hinges at the supports 10 metres apart. The horizontal thrust is (A) 1250 kg (B) 125 kg (C) 750 kg (D) 2500 kg

Last Answer : (A) 1250 kg