Pick up the correct statement from the following: (A) The tangent screw enables to give small movement under conditions of smooth and positive control (B) Standing on the tripod is the levelling head or trib arch (C) The levelling screws are used to tilt the instrument so that its rotation axis is truly vertical (D) All the above

Pick up the correct statement from the following:
(A) The tangent screw enables to give small movement under conditions of smooth and positive
control
(B) Standing on the tripod is the levelling head or trib arch
(C) The levelling screws are used to tilt the instrument so that its rotation axis is truly vertical
(D) All the above
by

1 Answer

Answer :

(D) All the above
by

Related questions

Pick up the correct statement from the following: (A) The property of a soil that enables it to become stiff in a relatively short time on standing is called thixotropy (B) The ratio of shear strength in natural state to the remoulded shear strength under undrained conditions is called degree of sensitivity (C) The difference between the undisturbed shear strength and remoulded shear strength is known remoulding loss (D) All the above

Description : Pick up the correct statement from the following: (A) The property of a soil that enables it to become stiff in a relatively short time on standing is called thixotropy (B) The ratio ... the undisturbed shear strength and remoulded shear strength is known remoulding loss (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) It is difficult to eliminate an error completely at first trial (B) Instability of the instrument makes it almost impossible to adjust it satisfactorily (C) Adjustment screws must be left bearing firmly but should never be forced (D) All the above

Description : Pick up the correct statement from the following: (A) It is difficult to eliminate an error completely at first trial (B) Instability of the instrument makes it almost impossible to adjust it ... ) Adjustment screws must be left bearing firmly but should never be forced (D) All the above

Last Answer : (D) All the above

After fixing the plane table to the tripod, the main operations which are needed at each plane table station are (i) Levelling (ii) Orientation (iii) Centering The correct sequence of these operations is (A) (i), (ii), (iii) (B) (i), (iii), (ii) (C) (iii), (i), (ii) (D) (ii), (iii), (i)

Description : After fixing the plane table to the tripod, the main operations which are needed at each plane table station are (i) Levelling (ii) Orientation (iii) Centering The correct sequence of these operations is (A) (i), (ii), (iii) (B) (i), (iii), (ii) (C) (iii), (i), (ii) (D) (ii), (iii), (i)

Last Answer : (B) (i), (iii), (ii)

Pick up the correct statement from the following: (A) An observation or the resulting reading with the level on a levelling staff is called sight (B) A back sight is the first sight taken after setting up the instrument in any position (C) The first sight on each change point is a fore sight (D) All the above

Description : Pick up the correct statement from the following: (A) An observation or the resulting reading with the level on a levelling staff is called sight (B) A back sight is the first sight taken after setting up ... position (C) The first sight on each change point is a fore sight (D) All the above

Last Answer : (D) All the above

The operation of revolving a plane table about its vertical axis so that all lines on the sheet become parallel to corresponding lines on the ground, is known (A) Levelling (B) Centering (C) Orientation (D) Setting

Description : The operation of revolving a plane table about its vertical axis so that all lines on the sheet become parallel to corresponding lines on the ground, is known (A) Levelling (B) Centering (C) Orientation (D) Setting

Last Answer : (C) Orientation

While viewing through a level telescope and moving the eye slightly, a relative movement occurs between the image of the levelling staff and the cross hairs. The instrument is (A) Correctly focussed (B) Not correctly focussed (C) Said to have parallax (D) Free from parallax

Description : While viewing through a level telescope and moving the eye slightly, a relative movement occurs between the image of the levelling staff and the cross hairs. The instrument is (A) Correctly focussed (B) Not correctly focussed (C) Said to have parallax (D) Free from parallax

Last Answer : (C) Said to have parallax

A 7 years-old child has class I malocclusion, slight version of maxillary class III, adequate arch length. What is your management: A. Oral screen B. Head cap therapy C. Inclined plane on mandibular anterior teeth D. Hawley plate E. Expansion screw plate

Description : A 7 years-old child has class I malocclusion, slight version of maxillary class III, adequate arch length. What is your management: A. Oral screen B. Head cap therapy C. Inclined plane on mandibular anterior teeth D. Hawley plate E. Expansion screw plate

Last Answer : C. Inclined plane on mandibular anterior teeth

While rotating the theodolite in the horizontal plane, the bubble of the bubble tube takes up the same position in its tube, it indicates (A) The rotation axis is vertical (B) The trunnion axis is horizontal (C) The line of collimation is perpendicular to vertical axis (D) None of the above

Description : While rotating the theodolite in the horizontal plane, the bubble of the bubble tube takes up the  same position in its tube, it indicates  (A) The rotation axis is vertical  (B) The trunnion ... (C) The line of collimation is perpendicular to vertical axis  (D) None of the above

Last Answer : (A) The rotation axis is vertical

When a cylindrical vessel, containing some liquid, is rotated about its vertical axis, the liquid surface is depressed down at the axis of its rotation and rises up near the walls of the vessel on all sides. This type of flow is known as (A) Steady flow (B) Turbulent flow (C) Vortex flow

Description : When a cylindrical vessel, containing some liquid, is rotated about its vertical axis, the liquid surface is depressed down at the axis of its rotation and rises up near the walls of the vessel on all sides. This type of flow is known as (A) Steady flow (B) Turbulent flow (C) Vortex flow

Last Answer : Answer: Option C

Which type of screw fasteners are threaded through out its length? a. Cap screws b. Set screws c. Studs d. Tap bolt

Description : Which type of screw fasteners are threaded through out its length? a. Cap screws b. Set screws c. Studs d. Tap bolt

Last Answer : b. Set screws

Mechanism or device which enables the TV camera to move in internal and tilting motion. A. Tilting B. Scanner C. Pan/tilt device D. Panning device

Description : Mechanism or device which enables the TV camera to move in internal and tilting motion. A. Tilting B. Scanner C. Pan/tilt device D. Panning device

Last Answer : C. Pan/tilt device

Pick up correct statement from the following: (A) Fibre boards are used for thermal and acoustic control (B) Fibre boards are used for light weight standing members (C) Fibre boards are obtained by impregnating a resin product on fibres (D) All the above

Description : Pick up correct statement from the following: (A) Fibre boards are used for thermal and acoustic control (B) Fibre boards are used for light weight standing members (C) Fibre boards are obtained by impregnating a resin product on fibres (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Water enables chemical reaction to take place with cement (B) Water lubricates the mixture of gravel, sand and cement (C) Strength of concrete structure largely depends upon its workability (D) All the above

Description : Pick up the correct statement from the following: (A) Water enables chemical reaction to take place with cement (B) Water lubricates the mixture of gravel, sand and cement (C) Strength of concrete structure largely depends upon its workability (D) All the above

Last Answer : (D) All the above

A theodolite is said to be in perfect adjustment if (A) Rotation axis is vertical to the transit axis (B) Transit axis is perpendicular to line of collimation (C) Line of collimation sweeps out a vertical plane while the telescope is elevated or depressed (D) All the above

Description : A theodolite is said to be in perfect adjustment if (A) Rotation axis is vertical to the transit axis (B) Transit axis is perpendicular to line of collimation (C) Line of collimation sweeps out a vertical plane while the telescope is elevated or depressed (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) Long tangent sections exceeding 3 km in length should be avoided (B) Curve length should be at least 150 metres for a deflection angle of 5 degree (C) For every degree decrease in the deflection angle, 30 metre length of curve to be increased (D) All the above

Description : Pick up the correct statement from the following: (A) Long tangent sections exceeding 3 km in length should be avoided (B) Curve length should be at least 150 metres for a deflection angle of 5 ... decrease in the deflection angle, 30 metre length of curve to be increased (D) All the above

Last Answer : Answer: Option D

A man is standing near the edge of a uniformly rotating platform about an axis passing through its centre. The speed of rotation of the platform will decrease if he a.extends his arms outwards b.moves towards the axis of rotation c.jumps out from the platform d.accepts a heavy bag from one of his friends standing near by and holds it in his hand e.107 dynes

Description : A man is standing near the edge of a uniformly rotating platform about an axis passing through its centre. The speed of rotation of the platform will decrease if he a.extends his arms outwards b.moves ... heavy bag from one of his friends standing near by and holds it in his hand e.107 dynes

Last Answer : d. accepts a heavy bag from one of his friends standing near by and holds it in his hand

A man is standing ner the edge of a uniformly rotating platform about an axis passing through its centre. The speed of rotation of the platorm will decrease if he a.extends his arms outwards b.107 dynes c.moves towards the axis of rotation d.jumps out from that platform e.take out his coat and throws away

Description : A man is standing ner the edge of a uniformly rotating platform about an axis passing through its centre. The speed of rotation of the platorm will decrease if he a.extends his arms outwards b.107 ... towards the axis of rotation d.jumps out from that platform e.take out his coat and throws away

Last Answer : a. extends his arms outwards

The tangent at any point P of a curve C meeta the x-axis at Q whose abscissa is positive and OP = OQ where O is origin, if C is a family of parabola h

Description : The tangent at any point P of a curve C meeta the x-axis at Q whose abscissa is positive and OP = OQ where O is origin, if C is a family of parabola h

Last Answer : The tangent at any point P of a curve C meeta the x-axis at Q whose abscissa is positive and OP = OQ ... , then find value of `(4(alpha+beta))/a` ?

Pick up the correct statement from the following: (A) The structural member subjected to compression and whose dimensions are small as compared to its length, is called a stmt (B) The vertical compression members are generally known as columns or stanchions (C) Deflection in lateral direction of a long column, is generally known as buckling (D) All the above

Description : Pick up the correct statement from the following:  (A) The structural member subjected to compression and whose dimensions are small as  compared to its length, is called a stmt  (B) The ... in lateral direction of a long column, is generally known as buckling  (D) All the above

Last Answer : (D) All the above

Indicate which of the statement is incorrect with regard to coning of Wheels a)coning of wheels help the vehicle to negotiate a curve smoothly b) It helps in smooth riding c) It increases wear and Tear of wheel flanges* d)it enables the outer wheel of vehicle to take a longer distance e) it restricts the swaying of vehicles

Description : Indicate which of the statement is incorrect with regard to coning of Wheels a)coning of wheels help the vehicle to negotiate a curve smoothly b) It helps in smooth riding c) It increases ... enables the outer wheel of vehicle to take a longer distance e) it restricts the swaying of vehicles

Last Answer : c) It increases wear and Tear of wheel flanges*

Dumpy level is most suitable when (A) The instrument is to be shifted frequently (B) Fly levelling is being done over long distance (C) Many readings are to be taken from a single setting of the instrument (D) All of the above

Description : Dumpy level is most suitable when (A) The instrument is to be shifted frequently (B) Fly levelling is being done over long distance (C) Many readings are to be taken from a single setting of the instrument (D) All of the above

Last Answer : (C) Many readings are to be taken from a single setting of the instrument

Subtense bar is an instrument used for (A) Levelling (B) Measurement of horizontal distances in plane areas (C) Measurement of horizontal distances in undulated areas (D) Measurement of angles

Description : Subtense bar is an instrument used for (A) Levelling (B) Measurement of horizontal distances in plane areas (C) Measurement of horizontal distances in undulated areas (D) Measurement of angles

Last Answer : (C) Measurement of horizontal distances in undulated areas

In levelling operation (A) When the instrument is being shifted, the staff must not be moved (B) When the staff is being carried forward, the instrument must remain stationary (C) Both (a) and (b) (D) Neither (a) nor (b)

Description : In levelling operation (A) When the instrument is being shifted, the staff must not be moved (B) When the staff is being carried forward, the instrument must remain stationary (C) Both (a) and (b) (D) Neither (a) nor (b)

Last Answer : (C) Both (a) and (b)

In case of levelling, backsight is (a) A fixed point of known elevation (b) The last staff reading taken before shifting the instrument (c) The first staff reading taken after setting the instrument (d) Any staff reading taken on a point of unknown elevation

Description : In case of levelling, backsight is (a) A fixed point of known elevation (b) The last staff reading taken before shifting the instrument (c) The first staff reading taken after setting the instrument (d) Any staff reading taken on a point of unknown elevation

Last Answer : (c) The first staff reading taken after setting the instrument

Pick up the correct statement from the following: (A) Inclined borings are made for taking samples under existing structures (B) Inclined borings are occasionally used instead of vertical holes (C) The spacing of inclined borings is kept such that one bore hole is vertically above the bottom of an adjacent bore hole (D) All the above

Description : Pick up the correct statement from the following: (A) Inclined borings are made for taking samples under existing structures (B) Inclined borings are occasionally used instead of vertical holes (C) The ... bore hole is vertically above the bottom of an adjacent bore hole (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) According to the petrological characteristics, concrete aggregates are classified as heavy weight, normal weight and light weight (B) According to the shape of the particles, concrete aggregates are classified as rounded irregular, angular and flaky (C) According to the surface texture of the particles, the concrete aggregates are classified as glassy, smooth, granular, rough, crystalline, honey combed and porous (D) All the above

Description : Pick up the correct statement from the following: (A) According to the petrological characteristics, concrete aggregates are classified as heavy weight, normal weight and light weight (B) According to ... glassy, smooth, granular, rough, crystalline, honey combed and porous (D) All the above

Last Answer : Answer: Option D

Pick out the wrong statement. (A) In process heat exchangers, saturated steam is preferred over the superheated steam (B) The maximum is the emissive power of a surface at a temperature T1 occurs at a wavelength of λ1 . If the surface temperature is halved, the maximum in the emissive power would occur at a wavelength of 0.5 λ1 (C) When a vertical plate is heated in infinite air environmental under natural convection conditions, the velocity profile in air, normal to the plate, exhibits a maximum

Description : Pick out the wrong statement. (A) In process heat exchangers, saturated steam is preferred over the superheated steam (B) The maximum is the emissive power of a surface at a temperature T1 ... under natural convection conditions, the velocity profile in air, normal to the plate, exhibits a maximum

Last Answer : (B) The maximum is the emissive power of a surface at a temperature T1 occurs at a wavelength of λ1 . If the surface temperature is halved, the maximum in the emissive power would occur at a wavelength of 0.5 λ1

If a gauge is installed perpendicular to the slope, its measurement is reduced by multiplying (A) Sine of the angle of inclination with vertical (B) Cosine of the angle of inclination with vertical (C) Tangent of the angle of inclination with vertical (D) Calibration coefficient of the gauge

Description : If a gauge is installed perpendicular to the slope, its measurement is reduced by multiplying (A) Sine of the angle of inclination with vertical (B) Cosine of the angle of inclination with vertical (C) Tangent of the angle of inclination with vertical (D) Calibration coefficient of the gauge

Last Answer : Answer: Option B

Clockwise of Anti clockwise rotation about the vertical axis to the perpendicular arm is provided through (A) Shoulder swivel (B) Elbow extension (C) Arm sweep (D) Wrist bend

Description : Clockwise of Anti clockwise rotation about the vertical axis to the perpendicular arm is provided through (A) Shoulder swivel (B) Elbow extension (C) Arm sweep (D) Wrist bend

Last Answer : C

The tangent to the liquid surface in a level tube, is parallel to the axis of the level tube at (A) Every point of the bubble (B) Either end of the bubble (C) The mid-point of the bubble (D) No where

Description : The tangent to the liquid surface in a level tube, is parallel to the axis of the level tube at  (A) Every point of the bubble  (B) Either end of the bubble  (C) The mid-point of the bubble  (D) No where

Last Answer : (C) The mid-point of the bubble 

Who believes in Pre-Wrath Rapture rather than Pre-Trib rapture.

Description : Who believes in Pre-Wrath Rapture rather than Pre-Trib rapture.

Last Answer : As long as it doesn’t screw up the World Series I’m fine with either one.

The vertical reaction for the arch is (A) wa/2l (B) wl/a (C) wa/l (D) wa²/2

Description : The vertical reaction for the arch is  (A) wa/2l (B) wl/a (C) wa/l (D) wa²/2

Last Answer : (A) wa/2l

In a solid arch, shear force acts (A) Vertically upwards (B) Along the axis of the arch (C) Perpendicular to the axis of arch (D) Tangentially to the arch

Description : In a solid arch, shear force acts (A) Vertically upwards (B) Along the axis of the arch (C) Perpendicular to the axis of arch (D) Tangentially to the arch

Last Answer : (C) Perpendicular to the axis of arch

The vertical distance between the springing line and highest point of the inner curve of an arch is known as (A) Intrados (B) Rise (C) Spandril (D) Extrados

Description : The vertical distance between the springing line and highest point of the inner curve of an arch is known as (A) Intrados (B) Rise (C) Spandril (D) Extrados

Last Answer : Answer: Option B

In case of unsteady fluid flow, conditions & flow pattern change with the passage of time at a position in a flow situation. Which of the following is an example of unsteady flow? (A) Discharge of water by a centrifugal pump being run at a constant rpm (B) Water flow in the suction and discharge pipe of a reciprocating pump (C) Water discharge from a vertical vessel in which constant level is maintained (D) Low velocity flow of a highly viscous liquid through a hydraulically smooth pipe

Description : In case of unsteady fluid flow, conditions & flow pattern change with the passage of time at a position in a flow situation. Which of the following is an example of unsteady flow? (A) ... level is maintained (D) Low velocity flow of a highly viscous liquid through a hydraulically smooth pipe

Last Answer : (B) Water flow in the suction and discharge pipe of a reciprocating pump

Which is the planet its length of its day and the tilt of its axis are almost identical to those of the earth? -Do You Know?

Description : Which is the planet its length of its day and the tilt of its axis are almost identical to those of the earth? -Do You Know?

Last Answer : answer:

At what angle does the Earth tilt on its axis? -General Knowledge

Description : At what angle does the Earth tilt on its axis? -General Knowledge

Last Answer : answer:

Which is the planet its length of its day and the tilt of its axis are almost identical to those of the earth?

Description : Which is the planet its length of its day and the tilt of its axis are almost identical to those of the earth?

Last Answer : Mars

Which is the planet its length of its day and the tilt of its axis are almost identical to those of the earth?

Description : Which is the planet its length of its day and the tilt of its axis are almost identical to those of the earth?

Last Answer : Mars

The vertical dotted line connecting the small circular symbols at coordinates '05L', '09L', '13L', '21L', '25L', etc., shown in the illustration, indicate that all _______________. EL-0100 A. contacts are operated by the same relay coil B. screw connections are on terminal board 'TB2' C. wires are grounded at both ends of the line D. wires have a common shield

Description : The vertical dotted line connecting the small circular symbols at coordinates '05L', '09L', '13L', '21L', '25L', etc., shown in the illustration, indicate that all _______________. EL-0100 A. contacts are ... board 'TB2' C. wires are grounded at both ends of the line D. wires have a common shield

Last Answer : Answer: B

Which instrument are used for intensity of the earthquakea) Richter scale b) Seismometers c) Seismograph d) Tilt meter

Description : Which instrument are used for intensity of the earthquake a) Richter scale b) Seismometers c) Seismograph d) Tilt meter

Last Answer : b) Seismometers

What is io's axis tilt?

Description : What is io's axis tilt?

Last Answer : Feel Free to Answer

What is the tilt of the earts axis?

Description : What is the tilt of the earts axis?

Last Answer : what is the earths tilt axis

How does the tilt of earths axis account for differences in the area of sunlight each hemisphere receives during the summer solstice and winter solstice?

Description : How does the tilt of earths axis account for differences in the area of sunlight each hemisphere receives during the summer solstice and winter solstice?

Last Answer : What is the answer ?

What is the tilt of the earts axis?

Description : What is the tilt of the earts axis?

Last Answer : what is the earths tilt axis

How do the tilt of Earths axis and Earths movement’s around the sun cause seasons?

Description : How do the tilt of Earths axis and Earths movement’s around the sun cause seasons?

Last Answer : Earth's tilted axis causes the seasons. Throughout the year, different parts of Earth receive the Sun's most direct rays. So, when the North Pole tilts toward the Sun, it's summer in the northern hemisphere. And when the South Pole tilts toward the Sun, it's winter in the Northern Hemisphere.

Which one of the following statements is correct? (A) When the axes of rotation of the graduated circle and the verniers are not coincident, the instrument possesses eccentricity (B) The mean of the readings of the two verniers gives correct reading free from the eccentricity (C) One Vernier may be used if the readings of two verniers differ by a constant (D) All the above

Description : Which one of the following statements is correct? (A) When the axes of rotation of the graduated circle and the verniers are not coincident, the instrument possesses eccentricity (B) The mean of the ... Vernier may be used if the readings of two verniers differ by a constant (D) All the above

Last Answer : (D) All the above

Pick up the incorrect statement from the following: (A) The rate of flow of water through a unit cross-sectional area under a unit hydraulic gradient, is called coefficient of permeability (B) The rate of flow of water through a vertical strip of the aquifer of unit width and full depth under a unit hydraulic gradient, is called coefficient of transmissibility (C) The flow of water through aquifers, is governed by the Darcy's law (D) The term 'transmissibility' was introduced by Meinzer

Description : Pick up the incorrect statement from the following: (A) The rate of flow of water through a unit cross-sectional area under a unit hydraulic gradient, is called coefficient of permeability (B) ... aquifers, is governed by the Darcy's law (D) The term 'transmissibility' was introduced by Meinzer

Last Answer : Answer: Option D

Pick up the incorrect statement from the following: (A) Horizontal D.P.C. is provided at plinth level in internal walls (B) D.P.C. is provided under door and verandah openings (C) Vertical D.P.C. is not provided in internal walls (D) Cement concrete is a rigid damp-proofing material

Description : Pick up the incorrect statement from the following: (A) Horizontal D.P.C. is provided at plinth level in internal walls (B) D.P.C. is provided under door and verandah openings (C) Vertical D.P.C. is not provided in internal walls (D) Cement concrete is a rigid damp-proofing material

Last Answer : Answer: Option B