24. Find out the ‗odd‘ among the following choices for fuel substitution for industrial sector of India. a) LDO with LSHS b) Coal with rice husk c) Natural gas for fertilizer plant d) LPG for soft coke

Find out the ‗odd‘ among the following choices for fuel substitution for industrial sector of India. a) LDO with LSHS b) Coal with rice husk c) Natural gas for fertilizer plant d) LPG for soft coke
by

1 Answer

Answer :

 LPG for soft coke

by

Related questions

In a boiler, fuel substitution of coal with rice husk results in a) energy conservation b) energy efficiency c) both energy conservation and energy efficiency d) carbon neutrality

Description : In a boiler, fuel substitution of coal with rice husk results in a) energy conservation b) energy efficiency c) both energy conservation and energy efficiency d) carbon neutrality

Last Answer : d) carbon neutrality

Coal used in power plant is also known as (A) Steam coal (B) Charcoal (C) Coke (D) Soft coal.

Description : Coal used in power plant is also known as (A) Steam coal (B) Charcoal (C) Coke (D) Soft coal.

Last Answer : Steam coal

Pick out the wrong statement. (A) High concentration of oxygen in flue gas means high stack loss (B) Gaseous fuels require the least % excess air for complete combustion (C) The ratio of fixed carbon to volatile matter percentage in coal is called its 'fuel ratio' (D) Calorific value of natural gas is more than that of LPG

Description : Pick out the wrong statement. (A) High concentration of oxygen in flue gas means high stack loss (B) Gaseous fuels require the least % excess air for complete combustion (C) The ratio of fixed carbon to ... coal is called its 'fuel ratio' (D) Calorific value of natural gas is more than that of LPG

Last Answer : (D) Calorific value of natural gas is more than that of LPG

Which of the following fuel gases has the highest calorific value? (A) Natural gas (B) Coal bed methane (CBM) (C) Liquefied petroleum gas (LPG) (D) Sewage gas

Description : Which of the following fuel gases has the highest calorific value? (A) Natural gas (B) Coal bed methane (CBM) (C) Liquefied petroleum gas (LPG) (D) Sewage gas

Last Answer : (C) Liquefied petroleum gas (LPG)

__________ is the most popular kitchen fuel in India a. LPG b. Kerosene c. Coal d. Firewood

Description : __________ is the most popular kitchen fuel in India a. LPG b. Kerosene c. Coal d. Firewood

Last Answer : LPG

Soft coke is not (A) Produced by low temperature carbonisation of coal (B) A domestic fuel (C) Used in blast furnaces (D) None of these

Description : Soft coke is not (A) Produced by low temperature carbonisation of coal (B) A domestic fuel (C) Used in blast furnaces (D) None of these

Last Answer : (C) Used in blast furnaces

For which pair of the fuel gases, calorific value (C.V.) of one fuel is almost double that of the other on volume basis (i.e., kcal/Nm3 ), while the C.V. is same on weight basis (i.e., kcal/kg)? (A) Propane and acetylene (B) Propane and LPG (C) Sewage gas and gobar gas (D) B.F. gas and coke oven gas

Description : For which pair of the fuel gases, calorific value (C.V.) of one fuel is almost double that of the other on volume basis (i.e., kcal/Nm3 ), while the C.V. is same on weight basis (i.e., kcal/kg)? (A) Propane and acetylene (B) Propane and LPG (C) Sewage gas and gobar gas (D) B.F. gas and coke oven gas

Last Answer : (A) Propane and acetylene

For which pair of the fuel gases, calorific value (C.V.) of one fuel is almost double that of the other on volume basis (i.e., kcal/Nm3) while the C.V. is same on weight basis (i.e., kcal/kg)? (A) Propane and acetylene (B) Propane and LPG (C) Sewage gas and gobar gas (D) B.F gas and coke oven gas

Description : For which pair of the fuel gases, calorific value (C.V.) of one fuel is almost double that of the other on volume basis (i.e., kcal/Nm3) while the C.V. is same on weight basis (i.e., kcal/kg)? (A ... and acetylene (B) Propane and LPG (C) Sewage gas and gobar gas (D) B.F gas and coke oven gas

Last Answer : D) B.F gas and coke oven gas

Which among them is cleaner fuel –coal , LPG, Diesel , kerosene ? a) coal b)LPG c)diesel d)kerosene

Description : Which among them is cleaner fuel –coal , LPG, Diesel , kerosene ? a) coal b)LPG c)diesel d)kerosene

Last Answer : b)LPG

Among the fuels given below, the one with highest calorific value is – (1) Coke (2) Coal (3) Wood (4) Natural gas

Description : Among the fuels given below, the one with highest calorific value is – (1) Coke (2) Coal (3) Wood (4) Natural gas

Last Answer : (4) Natural gas Explanation: The calorific values of different fuels (in Kcal/kg) in dry state are: Wood: 3500; Coal: 4000-7000; Coke: 6500; and Natural Gas: 8600 Kcal/kg.

Among the fuels given below, the one with highest calorific value is (1) Coke (2) Coal (3) Wood (4) Natural gas

Description : Among the fuels given below, the one with highest calorific value is (1) Coke (2) Coal (3) Wood (4) Natural gas

Last Answer : Natural gas

______energy source is the largest source used in India. a. CNG b. LPG c. Coal d. Bio Gas

Description : . ______energy source is the largest source used in India. a. CNG b. LPG c. Coal d. Bio Gas

Last Answer : Coal

Low temperature carbonisation of coal produces (A) Metallurgical coke (B) Soft coke (C) Very low calorific value coke oven gas (D) No by-products

Description : Low temperature carbonisation of coal produces (A) Metallurgical coke (B) Soft coke (C) Very low calorific value coke oven gas (D) No by-products

Last Answer : (B) Soft coke

Coal used in power plant is also known as (A) steam coal (B) charcoal (C) coke (D) soft coal.

Description : Coal used in power plant is also known as (A) steam coal (B) charcoal (C) coke (D) soft coal.

Last Answer : Ans: A

LSHS is a type of furnace oil, which (A) Is more viscous than high viscosity furnace oil (HVFO) (B) Stands for low sulphur heavy stock (C) Is an ideal fuel for metallurgical furnaces due to its lower sulphur content (< 1%(D) All (A), (B) and (C))

Description : LSHS is a type of furnace oil, which (A) Is more viscous than high viscosity furnace oil (HVFO) (B) Stands for low sulphur heavy stock (C) Is an ideal fuel for metallurgical furnaces due to its lower sulphur content (< 1%) (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

A waste heat recovery system in industrial process has been key to reduce ....... Consumption. a) Coal b) Fuel c) Biogas d) Oil

Description : A waste heat recovery system in industrial process has been key to reduce ....... Consumption. a) Coal b) Fuel c) Biogas d) Oil

Last Answer : Fuel

A fertiliser plant is classified as a gas based fertiliser plant, when it uses__________ gas as a source of hydrogen for the manufacture of ammonia.(A) Coke oven(B) Producer(C) Natural(D) Coal

Description : A fertiliser plant is classified as a gas based fertiliser plant, when it uses__________ gas as a source of hydrogen for the manufacture of ammonia. (A) Coke oven (B) Producer (C) Natural (D) Coal

Last Answer : (C) Natural

Which among the following has the highest flue gas loss on combustion due to Hydrogen in the fuel? a) natural gas b) furnace oil c) coal d) light diesel oil

Description : Which among the following has the highest flue gas loss on combustion due to Hydrogen in the fuel? a) natural gas b) furnace oil c) coal d) light diesel oil

Last Answer : a) natural gas

The reason for excessive clinker formation in gas producers is the (A) Use of coal/coke containing a high % of fines and ash (B) Use of fuel having too low an ash fusion temperature (C) Development of hot spots in the fuel bed and an abnormally high rate of gasification (D) All (A), (B) and (C)

Description : The reason for excessive clinker formation in gas producers is the (A) Use of coal/coke containing a high % of fines and ash (B) Use of fuel having too low an ash fusion temperature (C) Development of hot spots in the fuel bed and an abnormally high rate of gasification (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Fuel used in B.F. stove is (A) Pulverised coal (B) Furnace oil (C) Blast furnace gas/mixed gas (D) Coke oven gas

Description : Fuel used in B.F. stove is (A) Pulverised coal (B) Furnace oil (C) Blast furnace gas/mixed gas (D) Coke oven gas

Last Answer : (C) Blast furnace gas/mixed gas

Which of the following is unsuitable fuel for producer gas manufacture? (A) Coke (B) Anthracite (C) Coal having low fusion point of its ash (D) Coal having high fusion point of its ash

Description : Which of the following is unsuitable fuel for producer gas manufacture? (A) Coke (B) Anthracite (C) Coal having low fusion point of its ash (D) Coal having high fusion point of its ash

Last Answer : (C) Coal having low fusion point of its ash

Preheating of coal charge for the coke ovens reduces the (A) Time of carbonisation (B) Yield of gas and tar(C) Fuel consumption in coking(D) All (A), (B) and (C)

Description : Preheating of coal charge for the coke ovens reduces the (A) Time of carbonisation (B) Yield of gas and tar (C) Fuel consumption in coking (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Producer gas is obtained by  A. partial combustion of coal, coke, anthracite coal or charcoal in a mixed air steam blast  B. carbonisation of bituminous coal  C. passing steam over incandescent coke  D. passing air and a large amount of steam over waste coal at about 650°C

Description : Producer gas is obtained by  A. partial combustion of coal, coke, anthracite coal or charcoal in a mixed air steam blast  B. carbonisation of bituminous coal  C. passing steam over incandescent coke  D. passing air and a large amount of steam over waste coal at about 650°C

Last Answer : Answer: A

Producer gas is obtained by  A. partial combustion of coal, coke, anthracite coal or charcoal in a mixed air steam blast  B. carbonisation of bituminous coal  C. passing steam over incandescent coke  D. passing air and a large amount of steam over waste coal at about 650°C

Description : Producer gas is obtained by  A. partial combustion of coal, coke, anthracite coal or charcoal in a mixed air steam blast  B. carbonisation of bituminous coal  C. passing steam over incandescent coke  D. passing air and a large amount of steam over waste coal at about 650°C

Last Answer : Answer: A

Which of the following gas is mostly used in town for street and domestic lighting and heating?  A. Producer gas  B. Coal gas  C. Mond gas  D. Coke oven gas

Description : Which of the following gas is mostly used in town for street and domestic lighting and heating?  A. Producer gas  B. Coal gas  C. Mond gas  D. Coke oven gas

Last Answer : Answer: B

Fertilizer plant getting its hydrogen requirement partly from coke oven gas is (in India) situated at (A) Rourkela (under SAIL) (B) Barauni (under HFC) (C) Nangal (under NFL) (D) Talcher (under FCI)

Description : Fertilizer plant getting its hydrogen requirement partly from coke oven gas is (in India) situated at (A) Rourkela (under SAIL) (B) Barauni (under HFC) (C) Nangal (under NFL) (D) Talcher (under FCI)

Last Answer : (A) Rourkela (under SAIL)

Which of the following is not a 'manufactured' fuel? (A) LPG (B) Coal briquettes (C) Tar (D) Colloidal fuels

Description : Which of the following is not a 'manufactured' fuel? (A) LPG (B) Coal briquettes (C) Tar (D) Colloidal fuels

Last Answer : (C) Tar

Coke is made by heating coal in the absence of air at: A. 700 °C B. 1300 °C C. 900 °C D. 1700 °C ANSWER: Why are soft drinks made with chilled water rather than water at room temperature? A. Ingredients dissolve better in chilled water B. Chilled water enhances the taste C. Chilled water attracts more carbon dioxide D. Chilled water is more hygienic

Description : Coke is made by heating coal in the absence of air at: A. 700 °C B. 1300 °C C. 900 °C D. 1700 °C ANSWER: Why are soft drinks made with chilled water rather than water at room ... B. Chilled water enhances the taste C. Chilled water attracts more carbon dioxide D. Chilled water is more hygienic

Last Answer : ANSWER: C

The tool used for performance assessment and logical evaluation of avenues for improvement in Energy management and audit is a) Fuel substitution c) Energy pricing b) Monitoring and verification d) Bench marking

Description : The tool used for performance assessment and logical evaluation of avenues for improvement in Energy management and audit is a) Fuel substitution c) Energy pricing b) Monitoring and verification d) Bench marking

Last Answer : Bench marking

22. The tool used for performance assessment and logical evaluation of avenues for improvement in Energy management and audit is a) Fuel substitution b) Monitoring and verification c) Energy pricing d) Bench marking 23. Infrared thermometer is used

Description : The tool used for performance assessment and logical evaluation of avenues for improvement in Energy management and audit is a) Fuel substitution b) Monitoring and verification c) Energy pricing d) Bench marking 23. Infrared thermometer is used

Last Answer : Bench marking

Air/gas ratio for complete combustion will be the highest for (A) LPG (B) Gobar gas (C) Coke oven gas

Description : Air/gas ratio for complete combustion will be the highest for (A) LPG (B) Gobar gas (C) Coke oven gas

Last Answer : (A) LPG

Which of the following is not a manufactured fuel? (A) Coke breeze (B) Soft coke (C) Colloidal fuels (D) Charcoal

Description : Which of the following is not a manufactured fuel? (A) Coke breeze (B) Soft coke (C) Colloidal fuels (D) Charcoal

Last Answer : (A) Coke breeze

Main use of soft coke is as __________ fuel. (A) Domestic (B) Blast furnace (C) Foundry (D) None of these

Description : Main use of soft coke is as __________ fuel. (A) Domestic (B) Blast furnace (C) Foundry (D) None of these

Last Answer : (A) Domestic

What is the full form of 'LDO' ? -How To ?

Description : What is the full form of 'LDO' ? -How To ?

Last Answer : The full form of 'LDO' is Light Diesel Oil

Which of the following fuel gases is heavier than air? (A) Blast furnace gas (B) Coke oven gas (C) Natural gas (D) Water gas

Description : Which of the following fuel gases is heavier than air? (A) Blast furnace gas (B) Coke oven gas (C) Natural gas (D) Water gas

Last Answer : (A) Blast furnace gas

Which of the following is a poisonous fuel gas? (A) Coke oven gas (B) Blast furnace gas (C) Natural gas (D) None of these

Description : Which of the following is a poisonous fuel gas? (A) Coke oven gas (B) Blast furnace gas (C) Natural gas (D) None of these

Last Answer : (B) Blast furnace gas

Which of the following is a primary fuel? (A) Blast furnace coke (B) Gasoline (C) Natural gas (D) Wood charcoal

Description : Which of the following is a primary fuel? (A) Blast furnace coke (B) Gasoline (C) Natural gas (D) Wood charcoal

Last Answer : (C) Natural gas

What is applied to the rice husk before seeding ?

Description : What is applied to the rice husk before seeding ?

Last Answer : Before placing the seeds, dung and water are applied on the paddy field.

Which naturally occurring element in the rice husk makes it termite resistant?

Description : Which naturally occurring element in the rice husk makes it termite resistant?

Last Answer : Silicon

Which of the following is not used as filter aid? (A) Asbestos (B) Diatomaceous earth (C) Purified wood cellulose (D) Rice husk

Description : Which of the following is not used as filter aid? (A) Asbestos (B) Diatomaceous earth (C) Purified wood cellulose (D) Rice husk

Last Answer : (D) Rice husk

Aspergillosis (Brooder pneumonia) in young chicks is predisposed by the type of litter B A. rice husk B. Saw dust C. sand D. None of the these

Description : Aspergillosis (Brooder pneumonia) in young chicks is predisposed by the type of litter B A. rice husk B. Saw dust C. sand D. None of the these

Last Answer : Saw dust

Rice husk is used for making cement because it contains a. Silica b. Calcium c. Iron d. None of these

Description : Rice husk is used for making cement because it contains a. Silica b. Calcium c. Iron d. None of these

Last Answer : a. Silica

Write any two uses of rice husk and coir fibre.

Description : Write any two uses of rice husk and coir fibre. 

Last Answer : Uses of rice husk : 1. To make sound insulating material. 2. To make thermal insulation. 3. Used in manufacturing of clay bricks. 4. To make high grade concrete & mortar. 5. Used as ... delicate articles. 6. Used for geotextile. 7. Used in plaster work to make crack resistant plaster. 

Define rice husk. State the uses of rice husk.

Description : Define rice husk. State the uses of rice husk.

Last Answer : Rice Husk: - The outer most layer of paddy grain is called as rice husk. It is separated from Brown rice in rice mill. It has high silica content. Rice Husk is highly resistant to moisture ... for concrete and board. 4) Used in generation of heat energy, stream energy and electricity generation.

Write any four uses of rice husk

Description : Write any four uses of rice husk

Last Answer : Uses - 1) In the manufacturing of bricks. 2) In thermal insulation of building, rice husk can be used. 3) The ash produced after the husks have been burned is high in silica, which ... fillers for concrete and board. 4) Used in generation of heat energy, stream energy and electricity generation.

Beehive coke oven (A) Facilitates by-products recovery (B) Takes 2-3 days for coking of coal but requires no external fuel for heating (C) Gives larger yield of coke (around 85%) as compared to by-product ovens (D) Produces coke with very poor strength

Description : Beehive coke oven (A) Facilitates by-products recovery (B) Takes 2-3 days for coking of coal but requires no external fuel for heating (C) Gives larger yield of coke (around 85%) as compared to by-product ovens (D) Produces coke with very poor strength

Last Answer : (B) Takes 2-3 days for coking of coal but requires no external fuel for heating

Fuel consumption in coke making can be reduced by (A) Preheating, blending and de-ashing the coal (B) Stamped charging of coal (C) Dry quenching of coke (D) All (A), (B) and (C)

Description : Fuel consumption in coke making can be reduced by (A) Preheating, blending and de-ashing the coal (B) Stamped charging of coal (C) Dry quenching of coke (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following is considered as superior quality of coal? (A) Bituminous coal (B) Peat (C) Lignite (D) Coke.

Description : Which of the following is considered as superior quality of coal? (A) Bituminous coal (B) Peat (C) Lignite (D) Coke.

Last Answer : Bituminous coal

Ash content in the coke produced from a coking coal having 20% ash may be around __________ percent. (A) 6 (B) 12 (C) 18 (D) 24

Description : Ash content in the coke produced from a coking coal having 20% ash may be around __________ percent. (A) 6 (B) 12 (C) 18 (D) 24

Last Answer : (D) 24

Which of the following fuels is generally not used in thermal power plant boiler firing? (A) Furnace oil, light diesel oil and tar/PCM (B) Pulverised coking coal (C) Coal middling from washeries (D) B.F. gas, coke oven gas and L.D. converter gas

Description : Which of the following fuels is generally not used in thermal power plant boiler firing? (A) Furnace oil, light diesel oil and tar/PCM (B) Pulverised coking coal (C) Coal middling from washeries (D) B.F. gas, coke oven gas and L.D. converter gas

Last Answer : (B) Pulverised coking coal