For a battery with constant voltage, the reflection coefficient is

For a battery with constant voltage, the reflection coefficient is (a) ∞ (b) – 1 (c) 1 (d) 0 
by

1 Answer

Answer :

0
by

Related questions

The best indication about the state of charge on a lead acid battery is given by_______.

Description : The best indication about the state of charge on a lead acid battery is given by_______.

Last Answer : The best indication about the state of charge on a lead acid battery is given by specific gravity of electrolyte

The capacity of a battery is measured in

Description : The capacity of a battery is measured in (a) Watts (b) Watt-hours (c) Amperes (d) Ampere-hours 

Last Answer : Amper-hours

A battery of 40 V and three capacitors of 1000 μF, 500 μF and 100 μF are all connected in

Description : A battery of 40 V and three capacitors of 1000 μF, 500 μF and 100 μF are all connected in (I) parallel and (II) series. The ratio of total charge stored in case I to that in case II is approximately  (a) 3 : 64 (b) 64 : 3 (c) 160 : 3 (d) 104 : 5

Last Answer : A battery of 40 V and three capacitors of 1000 μF, 500 μF and 100 μF are all connected in (I) parallel and (II) series. The ratio of total charge stored in case I to that in case II is approximately 104 : 5

Unit to measure capacity of battery is

Description : Unit to measure capacity of battery is

Last Answer : Unit to measure capacity of battery is Ampere-hour

The condition of electrolyte in a battery is measured in terms of

Description : The condition of electrolyte in a battery is measured in terms of

Last Answer : The condition of electrolyte in a battery is measured in terms of specific gravity

A 120 Ah capacity battery can deliver a current of 8A for a period of

Description : A 120 Ah capacity battery can deliver a current of 8A for a period of

Last Answer : A 120 Ah capacity battery can deliver a current of 8A for a period of 15

Which gas is produced during charging of a lead-acid battery

Description : Which gas is produced during charging of a lead-acid battery

Last Answer : Hydrogen gas is produced during charging of a lead-acid battery

For a given base voltage and base volt-amperes, the per unit impedance value is x. For the doubled base

Description : For a given base voltage and base volt-amperes, the per unit impedance value is x. For the doubled base values of both voltage and volt-amperes, the per unit impedance will be (a) 2x (b) 0.25x (c) 0.5x (d) no change 

Last Answer : Answer is 2x Base impedance =(base voltage) ²/base current 

The current reflection coefficient of a line with voltage reflection coefficient of 0.65 is given by a) 0 b) 0.65 c) -0.65 d) 0.35

Description : The current reflection coefficient of a line with voltage reflection coefficient of 0.65 is given by a) 0 b) 0.65 c) -0.65 d) 0.35

Last Answer : c) -0.65

a) For a transmission line, Find SWR and reflection coefficient R if, i. There is no reflected voltage. ii. Reflected voltage and incident voltage is equal. iii. If reflected voltage=20V and incident voltage=10V. iv. If reflected voltage=10V and incident voltage =20V.

Description : a) For a transmission line, Find SWR and reflection coefficient R if, i. There is no reflected voltage. ii. Reflected voltage and incident voltage is equal. iii. If reflected voltage=20V and incident voltage=10V. iv. If reflected voltage=10V and incident voltage =20V.

Last Answer : reflection coefficient R=Vr/Vi i. There is no reflected voltage. i.e,Vr=0 R=0 SWR= 1+R/1-R=1 ii. Reflected voltage and incident voltage is equal. Vr=Vi; R=1 SWR= 1+R/1-R=1+1/1-1=infinity iii. If reflected ... and incident voltage =20V. Vr=10 and Vi=20 R=10/20=0.5 SWR= 1+R/1-R=1+.5/1-.5=3 

For transmission line, the incident voltage Ei = 6V, and Er = 3V. Calculate: (1) Reflection coefficient (2) Standing wave ratio

Description : For transmission line, the incident voltage Ei = 6V, and Er = 3V. Calculate: (1) Reflection coefficient (2) Standing wave ratio

Last Answer : (1)Reflection coefficient  (2) Standing wave ratio (1)Reflection coefficient Reflection coefficient R=Er/Ei  =3/6  R=0.5 (2) Standing wave ratio SWR=Ei+Er/Ei-Er  =6+3/6-3  SWR =3

For a transmission line, the incident voltage. Ei = 6V and Er =2V ,Calculate: (i) Reflection Coefficient (ii) SWR

Description : For a transmission line, the incident voltage. Ei = 6V and Er =2V ,Calculate: (i) Reflection Coefficient (ii) SWR

Last Answer : Reflection Coefficient(K) = Er / Ei  = 2V / 6V  K = 0.333 SWR = 1+K / 1- K  = 1+0.333 / 1-0.333  = 1.333 / 0.667 SWR= 1.998

The reflection coefficient of a short-circuited line for voltage is:

Description : The reflection coefficient of a short-circuited line for voltage is: A) -1 B) +1 C) 0.5 D) zero

Last Answer : The reflection coefficient of a short-circuited line for voltage is: -1

If Voltage Standing Wave Ratio, (VSWR) of a wave is 2, its reflection coefficient will be _____.

Description : If Voltage Standing Wave Ratio, (VSWR) of a wave is 2, its reflection coefficient will be _____.

Last Answer : If Voltage Standing Wave Ratio, (VSWR) of a wave is 2, its reflection coefficient will be 1/3.

When cells are arranged in parallel:

Description : When cells are arranged in parallel:

Last Answer : When cells are arranged in parallel: current capacity increases

Find the reflection coefficient of the wave with SWR of 3.5. a) 0.55 b) 0.23 c) 0.48 d) 0.68

Description : Find the reflection coefficient of the wave with SWR of 3.5. a) 0.55 b) 0.23 c) 0.48 d) 0.68

Last Answer : a) 0.55

Given that the reflection coefficient is 0.6. Find the SWR. a) 2 b) 4 c) 6 d) 8

Description : Given that the reflection coefficient is 0.6. Find the SWR. a) 2 b) 4 c) 6 d) 8

Last Answer : b) 4

Calculate the transmission coefficient of a wave with a reflection coefficient of 0.6 a) 0.6 b) 1 c) 0 d) 0.4

Description : Calculate the transmission coefficient of a wave with a reflection coefficient of 0.6 a) 0.6 b) 1 c) 0 d) 0.4

Last Answer : d) 0.4

Find the reflection coefficient of a wave with an incident electric field of 5 units and reflected electric field of 2 units. a) 2.5 b) 0.4 c) 0.8 d) 1.2

Description : Find the reflection coefficient of a wave with an incident electric field of 5 units and reflected electric field of 2 units. a) 2.5 b) 0.4 c) 0.8 d) 1.2

Last Answer : b) 0.4

The reflection coefficient in the wave propagation when it is transmitted with the Brewster angle is a) 0 b) 1 c) -1 d) Infinity

Description : The reflection coefficient in the wave propagation when it is transmitted with the Brewster angle is a) 0 b) 1 c) -1 d) Infinity

Last Answer : a) 0

What will be the reflection coefficient of the wave of load connected to transmission line if surge impedance of the line is equal to load ? (a) Zero (b) Unity (c) Infinity (d) None of the above

Description : What will be the reflection coefficient of the wave of load connected to transmission line if surge impedance of the line is equal to load ? (a) Zero (b) Unity (c) Infinity (d) None of the above

Last Answer : (a) Zero

transmission line has reflection coefficient as one. (a) Open circuit (b) Short-circuit (e) Long (d) None of the above

Description : transmission line has reflection coefficient as one. (a) Open circuit (b) Short-circuit (e) Long (d) None of the above

Last Answer : (a) Open circuit

A 50Ω transmission line is terminated in an impedance of 20-j50. What will be the reflection coefficient?

Description : A 50Ω transmission line is terminated in an impedance of 20-j50. What will be the reflection coefficient? A) 0.69 B) 1.69 C) 6.9 D) 16.9 

Last Answer : A 50Ω transmission line is terminated in an impedance of 20-j50. What will be the reflection coefficient? A) 0.69 B) 1.69 C) 6.9 D) 16.9 

A transmission line is terminated at its characteristic impedance. The reflection coefficient is

Description : A transmission line is terminated at its characteristic impedance. The reflection coefficient is  (a) 1 (b) –1 (c) 0 (d) ∞

Last Answer : A transmission line is terminated at its characteristic impedance. The reflection coefficient is  0

The coefficient of reflection for current wave is

Description : The coefficient of reflection for current wave is

Last Answer : The coefficient of reflection for current wave is 1 or -1

Whenever a wave is incident on a perfect conductor then the reflection coefficient is

Last Answer : Whenever a wave is incident on a perfect conductor then the reflection coefficient is 0.

n electrochemical cell which is used as a source of direct electrical current at constant voltage under standard conditions is called a – (1) Power transmittor (2) Battery (3) Uninterrupted power supply (UPS) (4) Generator

Description : n electrochemical cell which is used as a source of direct electrical current at constant voltage under standard conditions is called a – (1) Power transmittor (2) Battery (3) Uninterrupted power supply (UPS) (4) Generator

Last Answer : (3) Uninterrupted power supply (UPS) Explanation: A Galvanic cell, also known as battery, is an electro-chemical cell that derives electrical energy from spontaneous redox reactions taking place within ... produce direct current. A battery is a set of galvanic cells that are connected in parallel.

A lead-acid battery is considered fully charged when the ______________. A. electrolyte gasses freely B. battery charger ammeter indicates a positive reading C. terminal voltage reaches a constant value at a given temperature D. specific gravity of all cells reaches the correct value and no longer increases over a period of 1 to 4 hours

Description : A lead-acid battery is considered fully charged when the ______________. A. electrolyte gasses freely B. battery charger ammeter indicates a positive reading C. terminal voltage reaches a constant value at a ... cells reaches the correct value and no longer increases over a period of 1 to 4 hours

Last Answer : Answer: D

An electrochemical cell which is used as a source of direct electrical current at constant voltage under standard conditions is called a : (1) Power transmittor (2) Battery (3) Uninterrupted power supply (UPS) (4) Generator

Description : An electrochemical cell which is used as a source of direct electrical current at constant voltage under standard conditions is called a : (1) Power transmittor (2) Battery (3) Uninterrupted power supply (UPS) (4) Generator

Last Answer : Battery

The ratio of speed of light in air to the speed of light in another substance is called the a. Speed factor b. Index of reflection c. Index of refraction d. Dielectric constant

Description : The ratio of speed of light in air to the speed of light in another substance is called the a. Speed factor b. Index of reflection c. Index of refraction d. Dielectric constant

Last Answer : c. Index of refraction

Pick out the wrong statement: (A) With change in temperature, the radiant energy emitted by a black body remains unchanged (B) Absorptivity of a body approaches unity in case of diffuse reflection (C) Absorptivity of a perfectly black body is unity (D) Value of Stefan-Boltzmann constant is 4.876 × 10 -8 KCal/m2 .hr.°K4

Description : Pick out the wrong statement: (A) With change in temperature, the radiant energy emitted by a black body remains unchanged (B) Absorptivity of a body approaches unity in case of diffuse reflection (C) Absorptivity of ... unity (D) Value of Stefan-Boltzmann constant is 4.876 10 -8 KCal/m2 .hr.°K4

Last Answer : (A) With change in temperature, the radiant energy emitted by a black body remains unchanged

The ratio of speed of light in air to the speed of light in another substance is called the ∙ a. Speed factor ∙ b. Index of reflection ∙ c. Index of refraction ∙ d. Dielectric constant

Description : The ratio of speed of light in air to the speed of light in another substance is called the ∙ a. Speed factor ∙ b. Index of reflection ∙ c. Index of refraction ∙ d. Dielectric constant

Last Answer : b. Index of reflection

The fractional change in resistance per kelvin is known as, a. temperature coefficient of resistance b. coefficient of Voltage of charge c. thermal expansion d. all of above

Description : The fractional change in resistance per kelvin is known as, a. temperature coefficient of resistance b. coefficient of Voltage of charge c. thermal expansion d. all of above

Last Answer : a. temperature coefficient of resistance

For what value of p is the coefficient of x^2 in the product (2x – 1) (x – k) (px + 1) equal to 0 and the constant term equal to 2 ? -Maths 9th

Description : For what value of p is the coefficient of x^2 in the product (2x – 1) (x – k) (px + 1) equal to 0 and the constant term equal to 2 ? -Maths 9th

Last Answer : answer:

What is the term coefficient and constant of 7h plus 3?

Description : What is the term coefficient and constant of 7h plus 3?

Last Answer : 7h+3

Where p is a factor of the leading coefficient of the polynomial and q is a factor of the constant term.?

Description : Where p is a factor of the leading coefficient of the polynomial and q is a factor of the constant term.?

Last Answer : Anywhere. Provided it is not zero, and number p can be theleading coefficient of a polynomial. And any number q can be theconstant term.

A trinomial with a leading coefficient of 3 and a constant term of -5?

Description : A trinomial with a leading coefficient of 3 and a constant term of -5?

Last Answer : 8

The pH of an amino acid depends (A) Optical rotation (B) Dissociation constant (C) Diffusion coefficient(D) Chain length

Description : The pH of an amino acid depends (A) Optical rotation (B) Dissociation constant (C) Diffusion coefficient(D) Chain length

Last Answer : Answer : B

In an oil-lubricated journal bearing, coefficient of friction between the journal and the bearing. [IES-1995] (a) Remains constant at all speeds. (b) is minimum at zero speed and increases monotonically with increase in speed. (c) is maximum at zero speed and decreases monotonically with increase in speed. (d) becomes minimum at an optimum speed and then increases with further increase in speed.

Description : In an oil-lubricated journal bearing, coefficient of friction between the journal and the bearing. [IES-1995] (a) Remains constant at all speeds. (b) is minimum at zero speed and increases ... speed. (d) becomes minimum at an optimum speed and then increases with further increase in speed.

Last Answer : (d) becomes minimum at an optimum speed and then increases with further increase in speed.

Incorrect statement for co-efficient of friction could be that A. The coefficient of friction is denoted by the Greek letter µ. B. The coefficient of friction is directly proportional to the force of friction C. The coefficient of friction is constant even in the conditions of fast slipping and high contact pressure D. The coefficient of friction is inversely proportional to the force pressing the surfaces together

Description : Incorrect statement for co-efficient of friction could be that A. The coefficient of friction is denoted by the Greek letter µ. B. The coefficient of friction is directly proportional to ... D. The coefficient of friction is inversely proportional to the force pressing the surfaces together

Last Answer : The coefficient of friction is constant even in the conditions of fast slipping and high contact pressure

Determine the viscous damping coefficient if damper offers resistance 0.05N at constant velocity 0.04m/sec A 0.8N-sec/m B 1.5N-sec/m C 2.5N-sec/m D 1.25N-sec/m

Description : Determine the viscous damping coefficient if damper offers resistance 0.05N at constant velocity 0.04m/sec A 0.8N-sec/m B 1.5N-sec/m C 2.5N-sec/m D 1.25N-sec/m

Last Answer : D 1.25N-sec/m

Due to a rise in temperature, the viscosity and the unit weight of the percolating fluid are reduced to 60% and 90% respectively. If other things remain constant, the coefficient of permeability (A) Increases by 25 % (B) Increases by 50 % (C) Increases by 33.3 % (D) Decreases by 33.3 %

Description : Due to a rise in temperature, the viscosity and the unit weight of the percolating fluid are reduced to 60% and 90% respectively. If other things remain constant, the coefficient of permeability (A) Increases by 25 % (B) Increases by 50 % (C) Increases by 33.3 % (D) Decreases by 33.3 %

Last Answer : (B) Increases by 50 %

Coefficient of consolidation for clays normally (A) Decreases with increase in liquid limit (B) Increases with increase in liquid limit (C) First increases and then decreases with increase in liquid limit (D) Remains constant at all liquid limits

Description : Coefficient of consolidation for clays normally (A) Decreases with increase in liquid limit (B) Increases with increase in liquid limit (C) First increases and then decreases with increase in liquid limit (D) Remains constant at all liquid limits

Last Answer : (A) Decreases with increase in liquid limit

Select the correct statement. (A) Coefficient of compressibility of an over-consolidated clay is less than that of a normally consolidated clay (B) Coefficient of compressibility of an over-consolidated clay is greater than that of a normally consolidated clay (C) Coefficient of compressibility is constant for any clay (D) None of the above

Description : Select the correct statement. (A) Coefficient of compressibility of an over-consolidated clay is less than that of a normally consolidated clay (B) Coefficient of compressibility of an over-consolidated clay ... (C) Coefficient of compressibility is constant for any clay (D) None of the above

Last Answer : Answer: Option A

Coefficient of compressibility is (A) Constant for any type of soil (B) Different for different types of soils and also different for a soil under different states of consolidation (C) Different for different types of soils but same for a soil under different states of consolidation (D) Independent of type of soil but depends on the stress history of soil

Description : Coefficient of compressibility is (A) Constant for any type of soil (B) Different for different types of soils and also different for a soil under different states of consolidation (C) Different for ... of consolidation (D) Independent of type of soil but depends on the stress history of soil

Last Answer : Answer: Option B

Terzaghi's theory of one dimensional consolidation assumes (A) Load is applied in one direction (B) Coefficient of permeability is constant (C) Excess pore water drains out only in the vertical direction (D) All the above

Description : Terzaghi's theory of one dimensional consolidation assumes (A) Load is applied in one direction (B) Coefficient of permeability is constant (C) Excess pore water drains out only in the vertical direction (D) All the above

Last Answer : Answer: Option D

Coefficient of discharge of an ogee spillway (A) Depends on depth of approach and upstream slope (B) Depends on downstream apron interference and downstream submergence (C) Remains constant (D) Both (A) and (B

Description : Coefficient of discharge of an ogee spillway (A) Depends on depth of approach and upstream slope (B) Depends on downstream apron interference and downstream submergence (C) Remains constant (D) Both (A) and (B

Last Answer : Answer: Option D

At a constant mass and altitude, a lower airspeed requires: a. More thrust and a lower coefficient of lift b. Less thrust and a lower coefficient of lift c. More thrust and a lower coefficient of drag d. A higher coefficient of lift

Description : At a constant mass and altitude, a lower airspeed requires: a. More thrust and a lower coefficient of lift b. Less thrust and a lower coefficient of lift c. More thrust and a lower coefficient of drag d. A higher coefficient of lift

Last Answer : d. A higher coefficient of lift

At a constant mass and altitude, a lower airspeed requires: a. More thrust and a lower coefficient of lift b. Less thrust and a lower coefficient of lift c. More thrust and a lower coefficient of drag d. A higher coefficient of lift

Description : At a constant mass and altitude, a lower airspeed requires: a. More thrust and a lower coefficient of lift b. Less thrust and a lower coefficient of lift c. More thrust and a lower coefficient of drag d. A higher coefficient of lift

Last Answer : d. A higher coefficient of lift