The reflection coefficient of a short-circuited line for voltage is:

The reflection coefficient of a short-circuited line for voltage is: A) -1 B) +1 C) 0.5 D) zero
by

1 Answer

Answer :

The reflection coefficient of a short-circuited line for voltage is: -1

by

Related questions

The reflection co-efficient at the open circuited end of a transmission line. (a) zero (b) infinity (c) unity (d) none of the above

Description : The reflection co-efficient at the open circuited end of a transmission line. (a) zero (b) infinity (c) unity (d) none of the above

Last Answer : (c) unity

transmission line has reflection coefficient as one. (a) Open circuit (b) Short-circuit (e) Long (d) None of the above

Description : transmission line has reflection coefficient as one. (a) Open circuit (b) Short-circuit (e) Long (d) None of the above

Last Answer : (a) Open circuit

The current reflection coefficient of a line with voltage reflection coefficient of 0.65 is given by a) 0 b) 0.65 c) -0.65 d) 0.35

Description : The current reflection coefficient of a line with voltage reflection coefficient of 0.65 is given by a) 0 b) 0.65 c) -0.65 d) 0.35

Last Answer : c) -0.65

a) For a transmission line, Find SWR and reflection coefficient R if, i. There is no reflected voltage. ii. Reflected voltage and incident voltage is equal. iii. If reflected voltage=20V and incident voltage=10V. iv. If reflected voltage=10V and incident voltage =20V.

Description : a) For a transmission line, Find SWR and reflection coefficient R if, i. There is no reflected voltage. ii. Reflected voltage and incident voltage is equal. iii. If reflected voltage=20V and incident voltage=10V. iv. If reflected voltage=10V and incident voltage =20V.

Last Answer : reflection coefficient R=Vr/Vi i. There is no reflected voltage. i.e,Vr=0 R=0 SWR= 1+R/1-R=1 ii. Reflected voltage and incident voltage is equal. Vr=Vi; R=1 SWR= 1+R/1-R=1+1/1-1=infinity iii. If reflected ... and incident voltage =20V. Vr=10 and Vi=20 R=10/20=0.5 SWR= 1+R/1-R=1+.5/1-.5=3 

For transmission line, the incident voltage Ei = 6V, and Er = 3V. Calculate: (1) Reflection coefficient (2) Standing wave ratio

Description : For transmission line, the incident voltage Ei = 6V, and Er = 3V. Calculate: (1) Reflection coefficient (2) Standing wave ratio

Last Answer : (1)Reflection coefficient  (2) Standing wave ratio (1)Reflection coefficient Reflection coefficient R=Er/Ei  =3/6  R=0.5 (2) Standing wave ratio SWR=Ei+Er/Ei-Er  =6+3/6-3  SWR =3

For a transmission line, the incident voltage. Ei = 6V and Er =2V ,Calculate: (i) Reflection Coefficient (ii) SWR

Description : For a transmission line, the incident voltage. Ei = 6V and Er =2V ,Calculate: (i) Reflection Coefficient (ii) SWR

Last Answer : Reflection Coefficient(K) = Er / Ei  = 2V / 6V  K = 0.333 SWR = 1+K / 1- K  = 1+0.333 / 1-0.333  = 1.333 / 0.667 SWR= 1.998

If Voltage Standing Wave Ratio, (VSWR) of a wave is 2, its reflection coefficient will be _____.

Description : If Voltage Standing Wave Ratio, (VSWR) of a wave is 2, its reflection coefficient will be _____.

Last Answer : If Voltage Standing Wave Ratio, (VSWR) of a wave is 2, its reflection coefficient will be 1/3.

66 While conducting short-circuit test on a transformer the following side is short circuited A. High voltage side B. low voltage side C. primary side D. secondary side

Description : 66 While conducting short-circuit test on a transformer the following side is short circuited A. High voltage side B. low voltage side C. primary side D. secondary side

Last Answer : B. Low voltage side

30 In performing the short circuit test of a transformer A. high voltage is usually short circuited B. low voltage side is usually short circuited C. any side is short circuited with preference D. none of the above

Description : 30 In performing the short circuit test of a transformer A. high voltage is usually short circuited B. low voltage side is usually short circuited C. any side is short circuited with preference D. none of the above

Last Answer : B. Low voltage side is usually short circuited

A 50Ω transmission line is terminated in an impedance of 20-j50. What will be the reflection coefficient?

Description : A 50Ω transmission line is terminated in an impedance of 20-j50. What will be the reflection coefficient? A) 0.69 B) 1.69 C) 6.9 D) 16.9 

Last Answer : A 50Ω transmission line is terminated in an impedance of 20-j50. What will be the reflection coefficient? A) 0.69 B) 1.69 C) 6.9 D) 16.9 

Short-circuited stubs are preferred to open-circuited stubs because thelatter are a. more difficult to make an connect b. made of a transmission line with a different characteristic impedance c. liable to radiate

Description : Short-circuited stubs are preferred to open-circuited stubs because thelatter are a. more difficult to make an connect b. made of a transmission line with a different characteristic impedance c. liable to radiate

Last Answer : c. liable to radiate

Impedance inversionmaybe obtainedwith a. a short-circuited stub b. an open-circuited stub c. a quarter-wave line d. a half-wave line

Description : Impedance inversionmaybe obtainedwith a. a short-circuited stub b. an open-circuited stub c. a quarter-wave line d. a half-wave line

Last Answer : c. a quarter-wave line

The input impedance of a short circuited loss less transmission line of characteristic impedance 50 Ohm is

Description : The input impedance of a short circuited loss less transmission line of characteristic impedance 50 Ohm is

Last Answer : Capacitive

The phenomenon qf rise in voltage at the receiving end of the open-circuited or lightly loaded line is called the (a) Seeback effect (b) Ferranti effect (c) Raman effect (d) none of the above

Description : The phenomenon qf rise in voltage at the receiving end of the open-circuited or lightly loaded line is called the (a) Seeback effect (b) Ferranti effect (c) Raman effect (d) none of the above

Last Answer : (b) Ferranti effect

At what point on an open-circuited rf line do voltage peaks occur?

Description : At what point on an open-circuited rf line do voltage peaks occur?

Last Answer : At 1/2 wavelength from the end and at every 1/2 wavelength along the line

The phenomenon qf rise in voltage at the receiving end of the open-circuited or lightly loaded line is called the (a) Seeback effect (b) Ferranti effect (c) Raman effect (d) none of the above

Description : The phenomenon qf rise in voltage at the receiving end of the open-circuited or lightly loaded line is called the (a) Seeback effect (b) Ferranti effect (c) Raman effect (d) none of the above

Last Answer : (b) Ferranti effect

For a battery with constant voltage, the reflection coefficient is

Description : For a battery with constant voltage, the reflection coefficient is (a) ∞ (b) – 1 (c) 1 (d) 0 

Last Answer : 0

A cumulative dc compound motor runs at 1500 rpm. on full load. If its series field is short-circuited, its speed

Description : A cumulative dc compound motor runs at 1500 rpm. on full load. If its series field is short-circuited, its speed  (1) becomes zero (2) remains unchanged (3) increases (4) decreases

Last Answer : Increases. As it's cumulative compound motor, both series and shunt field both assist each other. If series field is short circuited, the overall field strength will decrease and atop of that ... speed is inversely proportional to field strength.  So, the speed will increase overall.

What will be the reflection coefficient of the wave of load connected to transmission line if surge impedance of the line is equal to load ? (a) Zero (b) Unity (c) Infinity (d) None of the above

Description : What will be the reflection coefficient of the wave of load connected to transmission line if surge impedance of the line is equal to load ? (a) Zero (b) Unity (c) Infinity (d) None of the above

Last Answer : (a) Zero

A transmission line is terminated at its characteristic impedance. The reflection coefficient is

Description : A transmission line is terminated at its characteristic impedance. The reflection coefficient is  (a) 1 (b) –1 (c) 0 (d) ∞

Last Answer : A transmission line is terminated at its characteristic impedance. The reflection coefficient is  0

If your multimeter gives a reading in ohms when testing each end of each conductor of a three-conductor cable, this indicates ______________. A. continuity of the conductor B. an infinite resistance C. the presence of a partial ground D. that the conductor is not short circuited

Description : If your multimeter gives a reading in ohms when testing each end of each conductor of a three-conductor cable, this indicates ______________. A. continuity of the conductor B. an infinite resistance C. the presence of a partial ground D. that the conductor is not short circuited

Last Answer : Answer: A

If the illustrated device is fully discharged, what will be the result? EL-0061 A. The battery will be short circuited because the mud space will be filled with lead sulfate B. The electrolyte will be maximum sulfuric acid minimum water C. The electrolyte will be maximum water minimum sulfuric acid. D. The plates will be maximum lead oxide and sponge lead minimum lead sulfate.

Description : If the illustrated device is fully discharged, what will be the result? EL-0061 A. The battery will be short circuited because the mud space will be filled with lead sulfate B. The electrolyte ... minimum sulfuric acid. D. The plates will be maximum lead oxide and sponge lead minimum lead sulfate.

Last Answer : Answer: C

In the illustration, the chemical reaction depicted indicates that the _________. EL-0061 A. battery is being charged at a high rate B. cell is short circuited C. cell is discharging D. battery is attached to a trickle charger

Description : In the illustration, the chemical reaction depicted indicates that the _________. EL-0061 A. battery is being charged at a high rate B. cell is short circuited C. cell is discharging D. battery is attached to a trickle charger

Last Answer : Answer: C

If many turns of an alternating current coil for a contactor become short circuited, the coil _____________. A. will continue to operate B. will probably burn out immediately C. will operate on reduced current D. temperature will drop

Description : If many turns of an alternating current coil for a contactor become short circuited, the coil _____________. A. will continue to operate B. will probably burn out immediately C. will operate on reduced current D. temperature will drop

Last Answer : Answer: B

Before servicing the device indicated as 'A' in panels #1 and #3 of the illustration, the device labeled 'CT' must __________. EL-0003 A. have the disconnected leads taped to prevent short circuiting. B. only be connected to multimeter on the ammeter setting C. be short circuited D. have one lead grounded to discharge static electricity for the prevention of damage to electronic components

Description : Before servicing the device indicated as 'A' in panels #1 and #3 of the illustration, the device labeled 'CT' must __________. EL-0003 A. have the disconnected leads taped to prevent ... D. have one lead grounded to discharge static electricity for the prevention of damage to electronic components

Last Answer : Answer: C

If many turns of an alternating current coil for a contactor become short circuited, the coil _____________. A. temperature will drop B. will probably burn out immediately C. will continue to operate D. will operate on reduced current

Description : If many turns of an alternating current coil for a contactor become short circuited, the coil _____________. A. temperature will drop B. will probably burn out immediately C. will continue to operate D. will operate on reduced current

Last Answer : Answer: B

Which of the following conditions indicates a short circuited capacitor when checking its condition with an ohmmeter? A. The capacitor shows charging, but the final resistance reading is appreciably less than normal. B. The reading is practically zero and remains there. C. The capacitor shows no charging action, but indicates a very high resistance. D. The pointer moves quickly to the low resistance side of the scale, then slowly recedes toward infinity.

Description : Which of the following conditions indicates a short circuited capacitor when checking its condition with an ohmmeter? A. The capacitor shows charging, but the final resistance reading is appreciably less ... moves quickly to the low resistance side of the scale, then slowly recedes toward infinity.

Last Answer : Answer: B

If you disconnect and arrange both ends of a three conductor cable, without any contact between the individual conductors, an indicated ohmic value between the ends of a single conductor would indicate ______________. A. continuity of the conductor B. an infinite resistance C. the presence of a partial ground D. that the conductor is not short circuited

Description : If you disconnect and arrange both ends of a three conductor cable, without any contact between the individual conductors, an indicated ohmic value between the ends of a single conductor would indicate ... resistance C. the presence of a partial ground D. that the conductor is not short circuited

Last Answer : Answer: A

A CT has 2 – secondary windings. If we use only one secondary winding can we keep the unused secondary winding short circuited?

Description : A CT has 2 – secondary windings. If we use only one secondary winding can we keep the unused secondary winding short circuited?

Last Answer : No. If it is short-circuited then the ratio will not get correctly. The turns of primary winding will be shared between 2 secondary windings. So the unused secondary winding should kept open. 

Which parameter indicates the rotor short-circuited turns (Not involving earthfault)?

Description : Which parameter indicates the rotor short-circuited turns (Not involving earthfault)? 

Last Answer : Vibration increases.  

The standing wave ratio of short circuited and open circuited lines will be a) 0 b) 1 c) -1 d) ∞

Description : The standing wave ratio of short circuited and open circuited lines will be a) 0 b) 1 c) -1 d) ∞

Last Answer : d) ∞

A dc cumulatively compounded motor delivers rated load torque at rated speed. If series field is short circuited, then the armature current and speed will a) Both increases b) Both decreases c) Increases and decreases d) Decreases and increases

Description : A dc cumulatively compounded motor delivers rated load torque at rated speed. If series field is short circuited, then the armature current and speed will a) Both increases b) Both decreases c) Increases and decreases d) Decreases and increases

Last Answer : Ans: Both increases

.A(75-j50)-is connectedtoa coaxialtransmission lineofZO=75 ,at 10GHz.The bestmethod ofmatching consistsin connecting a. a short-circuited stub at the load b. an inductance at the load c. a capacitance at some specific distance d. a short-circuited stub at some specific distance from the load

Description : .A(75-j50)-is connectedtoa coaxialtransmission lineofZO=75 ,at 10GHz.The bestmethod ofmatching consistsin connecting a. a short-circuited stub at the load b. an inductance at the load c. a capacitance at some specific distance d. a short-circuited stub at some specific distance from the load

Last Answer : d. a short-circuited stub at some specific distance from the load

Explain standing waves with load terminal open circuited and short circuited.

Description : Explain standing waves with load terminal open circuited and short circuited. 

Last Answer : Standing waves with load terminal open circuited   Standing waves: The forward and reflected waves on the incorrectly terminated transmission line produce an interference pattern known as Standing ... , the load impedance will not be equal to the transmission line (characteristic)impedence.

If a d.c. motor is disconnected from the source and armature circuit is short circuited through a suitable

Description : If a d.c. motor is disconnected from the source and armature circuit is short circuited through a suitable resistance, the process is called (a) regenerative breaking (b) rheostatic breaking (c) dynamic breaking (d) no breaking is possible

Last Answer : b) rheostatic breaking Because rheostat is connected to chang the power dissipated into heat.

A three phase slip ring induction motor is fed from the rotor side with stator winding short circuited stator is:

Description : A three phase slip ring induction motor is fed from the rotor side with stator winding short circuited stator is: (1) Slip frequency (2) Supply frequency (3) Frequency corresponding to rotor speed (4) Zero

Last Answer : A three phase slip ring induction motor is fed from the rotor side with stator winding short circuited stator is: Slip frequency

Armature coil is short circuited by brushes when it lies?

Last Answer : Armature coil is short circuited by brushes when it lies along neutral axis.

If the capacitor of a single-phase motor is short-circuited?

Last Answer : If the capacitor of a single-phase motor is short-circuited the motor will not start.

In case one phase of a three-phase synchronous motor is short-circuited the motor will?

Last Answer : In case one phase of a three-phase synchronous motor is short-circuited the motor will not start.

The secondary of a current transformer is always short-circuited under operating conditions because it?

Description : The secondary of a current transformer is always short-circuited under operating conditions because it?

Last Answer : The secondary of a current transformer is always short-circuited under operating conditions because it avoids core saturation and high voltage induction.

A quarter wave line open circuited at far end behaves as:

Description : A quarter wave line open circuited at far end behaves as:  (1) Inductance (2) L and C in parallel (3) Capacitance (4) L and C in series

Last Answer : A quarter wave line open circuited at far end behaves as: L and C in series.

Find the reflection coefficient of the wave with SWR of 3.5. a) 0.55 b) 0.23 c) 0.48 d) 0.68

Description : Find the reflection coefficient of the wave with SWR of 3.5. a) 0.55 b) 0.23 c) 0.48 d) 0.68

Last Answer : a) 0.55

Given that the reflection coefficient is 0.6. Find the SWR. a) 2 b) 4 c) 6 d) 8

Description : Given that the reflection coefficient is 0.6. Find the SWR. a) 2 b) 4 c) 6 d) 8

Last Answer : b) 4

Calculate the transmission coefficient of a wave with a reflection coefficient of 0.6 a) 0.6 b) 1 c) 0 d) 0.4

Description : Calculate the transmission coefficient of a wave with a reflection coefficient of 0.6 a) 0.6 b) 1 c) 0 d) 0.4

Last Answer : d) 0.4

Find the reflection coefficient of a wave with an incident electric field of 5 units and reflected electric field of 2 units. a) 2.5 b) 0.4 c) 0.8 d) 1.2

Description : Find the reflection coefficient of a wave with an incident electric field of 5 units and reflected electric field of 2 units. a) 2.5 b) 0.4 c) 0.8 d) 1.2

Last Answer : b) 0.4

The reflection coefficient in the wave propagation when it is transmitted with the Brewster angle is a) 0 b) 1 c) -1 d) Infinity

Description : The reflection coefficient in the wave propagation when it is transmitted with the Brewster angle is a) 0 b) 1 c) -1 d) Infinity

Last Answer : a) 0

The coefficient of reflection for current wave is

Description : The coefficient of reflection for current wave is

Last Answer : The coefficient of reflection for current wave is 1 or -1

Whenever a wave is incident on a perfect conductor then the reflection coefficient is

Last Answer : Whenever a wave is incident on a perfect conductor then the reflection coefficient is 0.