in disc harrow, It prevents disc from clogging. a. Feeder c.Jointer d. None of the above.

1 Answer

Answer :

Ans - b. Spacer

Related questions

Description : Jointer and coulter are the parts of :- A. Disc plough C. Indigenous plough B. Harrow plough D. MB plough

Last Answer : MB plough

Description : prevents disc from clogging. i. Scraper. c) slide disc ii. Spikal tooth. d) spring tooth

Last Answer : Scraper

Description : Disc plough works in loose soil also without much clogging. a) True b) False

Last Answer : True

Description : Penetration of a trailed type disc harrow is not affected by a) Size of disc b) Angle of disc c) Weight of disc d) Tractor hydraulic system Ans. d

Last Answer : Ans. d

Description : The penetration of a tandem disc harrow can be increased by a) Increasing tilt angle b) Increasing disc angle c) Increasing disc diameter d) All of the above Ans.c

Last Answer : Ans.c

Description : The two primary tillage equipments are 1. MB and disc harrow 2. Disc plough and disc harrow 3. Disc harrow and cultivator 4. MB and subsoiler

Last Answer : ans 4

Description : Dead furrow is made by 1. One way MB plough 2. 2 way MB plough 3. ridger 4. disc harrow

Last Answer : ans 1

Description : Which of the following is not a tractor drawn primary tillage tool? 1. Disc plough 2. rotavator 3. Country plough 4. Bar harrow

Last Answer : ans 3

Description : Which one of the following is not a secondary tillage tool? 1. Disc Plough 2. Disc harrow 3. Mould Board 4. none of these

Last Answer : ans 3

Description : Identify the following figure- a. Offset disc harrow. c. Single action disc harrow b. Double action disc harrow d. Tandem disc harrow

Last Answer : Single action disc harrow

Description : is a harrow which perform harrow operation by means of set or a number of sets of rotating slat each set being mounted on common shaft. a. Spike tooth harrow c. Triangular harrow b. Acme harrow. d. Disc harrow

Last Answer :  Disc harrow

Description : Tandem disc Harrow is a disc Harrow comprising of four gangs in which each gang can be angle in… direction. a. Angular c. Parallel b. Opposite. d. Perpendicular

Last Answer : Opposite

Description : The two primary tillage equipments are A. MB and disc harrow B. Disc plough and disc harrow C. Disc harrow and cultivator. D. MB and. Subscriber

Last Answer : MB and disc harrow

Description : Dead furrow is made by A. One way MB plough. B. 2 way MB plough C. Ridger. D. Disc harrow

Last Answer : One way MB plough

Description : Types of double action disc harrow A) Tandem disc harrow. C ) None B) Off-set disc harrow. D) Both A and B

Last Answer : Both A and B

Description : harrow consist of two gangs placed end to end. A) Single action disc harrow B) Double action disc harrow C) Triple action disc harrow D) None above

Last Answer : Single action disc harrow

Description : The gang angle of disc harrow is adjusted in the range of: a) 0-30 c) 30-60 b) 60-90 d) Above 90

Last Answer : B

Description : In disc harrow, the penetration of disc improves by: a) Increasing disc angle c) Lowering hitch point b) Regulating optimum speed d) All are correct

Last Answer : Increasing disc angle 

Description : . A Vertical disc plough is also termed as: a) Wheat plough c) Harrow plough b) Both (a) & (b) d) None of these

Last Answer : Both (a) & (b)

Description : are the primary tillage implements. A. Chisel plough and sub soiler C. Disc plough and disc harrow B. Chisel plough and disc harrow D. Leveler and clad crusher

Last Answer : Chisel plough and sub soiler

Description : is the following is not a secondary tillage tool A. Disc plough C. Mould board B. Disc harrow D. None of the above

Last Answer : disk harrow is secondry implement and mb plough and disk plouhg will be primarry implement

Description : It is the curved part which lifts, turns, and pulverizes the soil slice. b. Coulter c. Jointer d. None of the above

Last Answer : Ans – a. Mould board

Description : There are a few accessories necessary for plough are . a) Jointer b) Coulter c) Land wheel d) All of above

Last Answer : All of above

Description : turns the furrow slice used in stubble soils. a) Stubble type b) Slat type c) Share d) Jointer

Last Answer :    <!-- [endif] -->Stubble type

Description : The plough bottom as combined unit consist of: a) None of these c) Coulter , jointer and frog b) Beam , handle and MB d) Share, landside , frog and MB

Last Answer : Share, landside , frog and Mb

Description : This type blades in rotary tiller are Suitable for deep tillage in relatively clean ground, but clogging and wrapping of trashes on the tynes and shafts. a. L c. straight d. None of the above

Last Answer : Ans-  b. twisted

Description : is not well register, there is unbalance load, uneven harvesting and exclusive clogging of crops on the knife A) Vertical conveyor reaper B) MOVER C) Reaper binder D) Potato digger elevator.

Last Answer : MOVER

Description : Which plough will be used for maximum moisture conservation ? a. M B Plugh b. Cultivator c. Chisel plough d. Disc harrow

Last Answer : c. Chisel plough

Description : Which plough will be used for maximum moisture conservation ? a. M B Plugh b. Cultivator c. Chisel plough d. Disc harrow

Last Answer : c. Chisel plough

Description : The implement which can work in offset position a)offset disc harrow b) mower c) both (a) and (b) d) none of the above

Last Answer : c) both (a) and (b)

Description : In an offset disc harrow the angle between two gang is a) less than 90 degree b) 90 degree c) greater than 90 degree d) 180degree

Last Answer : a) less than 90 degre

Description : n single action disc harrow the two gangs are at set single a) less than 90 degree b) at 90 degree c) greater than 90 degree d) at 180 degree

Last Answer : c) greater than 90 degree

Description : Which end of the disc harrow penetrates deeply a) Concave b) Convex c) Rear d) Front

Last Answer : a) Concave

Description : The depth of penetration of a disc harrow is increased by: a) Tilt angle b) Gang angle c) Disc angle d) All of above

Last Answer : b) Gang angle

Description : The two primery tillage equipment a. MB plough and disc harrow b. Disc plough and disc harrow c. Disc harrow and cultivetor d. MB plough and subsoiler

Last Answer : d. MB plough and subsoiler

Description : Dead furrow is made by: a. One way MB plough b. Two way MB plough c. Ridger d. Disc harrow

Last Answer : a. One way MB plough

Description : A coulter attachment is used with: a. Disc harrow b. Seed drill c. MB plough d. Sub soiler

Last Answer : c. MB ploug

Description : .Land shipping become necessary often the following implments is used: a. MB plough b. Disc harrow c. Cultivator d. All of these

Last Answer : a. MB plough

Description : Land shaping becomes essential where often the following implement is used a) M.B. Plough b) Disc Harrow c) Cultivator d) All of the above

Last Answer : a) M.B. Plough

Description : Which end of disc harrow tends to penetrate more deeply a) Concave b) Convex c) Rear d) Front

Last Answer : a) Concave

Description : .Laying out of field in lands is essential when working with a. Two way plough b. One way plough c. Disc harrow d. Cultivator

Last Answer : b. One way plough

Description : Blades of disc harrow are sharpened from the_______ side penetrate more readily than blades sharpened from the__________ side a) convex, concave c) concave, convex b) Front, rear d) Rear, front

Last Answer : c) concave, convex

Description : Tapper roller bearing are used in disc harrow because a) It can take heavy radial loads b) It can take both radial as well as end thrust c) It can operate effectively at low speed and in contact with dirt d) Both (b) and (c) are true

Last Answer : d) Both (b) and (c) are true

Description : …………………………... moves the trash and roots from ahead of shin towords the main furrow so as 10 ensure complete coverage by the plough bottom a. Coulter b. Jointer c. Mould board d. Shin

Last Answer : b. Jointer

Description : Which of the following is not a tractor drawn tillage tool? 1. Cultivator 2. Augar plough 3. Harrow 4. Plank

Last Answer : ans 4

Description : has amplitude of vibration is 200mm and frequency of operation is 400 cycle/ sec. b. Acme tooth harrow c. Blade harrow d. None of the above

Last Answer : Ans- a. Reciprocating power harrow

Description : and guntaka are used prepare the seed bed mostly in clay soils. a. Spring tooth harrow b. Acme tooth harrow d. None of the above

Last Answer : Ans - c. Blade harrow

Description : The spike teeth are in Triangular harrow. a. Movable b. Adjustable d. None of the above

Last Answer : Ans - c. fixed

Description : It is a wooden plank used for smoothening the soil and crushing the weed. a. Spring tooth harrow b. Acme tooth harrow d. None of the above

Last Answer : Ans - c. Patela

Description : is also called as knife harrow. a. Spring tooth harrow c. Fixed tooth harrow d. None of the above

Last Answer : Ans - b.Acme tooth harrow