What Are Two Types Of Clearance In A Turbine?

What Are Two Types Of Clearance In A Turbine?
by

1 Answer

Answer :

1. Radial – clearance at the tips of the rotor and casing.
2. Axial – the foreandaft
clearance, at the sides of the rotor and the casing.
by

Related questions

What are two types of clearance in a turbine?

Description : What are two types of clearance in a turbine?

Last Answer : 1. Radial - clearance at the tips of the rotor and casing. 2. Axial - the fore-and-aft clearance, at the sides of the rotor and the casing.

What Are Four Types Of Turbine Seals?

Description : What Are Four Types Of Turbine Seals?

Last Answer : 1. Carbon rings fitted in segments around the shaft and held together by garter or retainer springs. 2. Labyrinth mated with shaft serration's or shaft seal strips. 3. Water seals where a shaft ... using woven or soft packing rings that are compressed with a gland to prevent leakage along the shaft.

Gas turbine cycle consists of  (a) two isothermals and two isentropics  (b) two isentropics and two constant volumes  (c) two isentropics, one constant volume and one constant pressure  (d) two isentropics and two constant pressures  (e) none of the above.

Description : Gas turbine cycle consists of  (a) two isothermals and two isentropics  (b) two isentropics and two constant volumes  (c) two isentropics, one constant volume and one constant pressure  (d) two isentropics and two constant pressures  (e) none of the above.

Last Answer : Answer : d

Why thermal efficiency of I.C. engines is more than that of gas turbine plant ?

Description : Why thermal efficiency of I.C. engines is more than that of gas turbine plant ?

Last Answer : In I.C. engine maximum temperature attained is higher than in gas turbine.

Why gas turbine power plant needs efficient compressor ?

Description : Why gas turbine power plant needs efficient compressor ?

Last Answer : Because a large portion of turbine work is eaten away by compressor and its inefficiency will affect net power output and cost of generation.

What Is A Stage In A Steam Turbine?

Description : What Is A Stage In A Steam Turbine?

Last Answer : In an impulse turbine, the stage is a set of moving blades behind the nozzle. In a reaction turbine, each row of blades is called a "stage." A single Curtis stage may consist of two or more rows of moving blades.

What Is A Radialflow Turbine?

Description : What Is A Radialflow Turbine?

Last Answer : In a radialflow turbine, steam flows outward from the shaft to the casing. The unit is usually a reaction unit, having both fixed and moving blades.

The instrument for measurement of flow/ velocity is________. A. Bimetallic. C) Turbine meter. B. Manometer. D) Wattmeter

Description : The instrument for measurement of flow/ velocity is________. A. Bimetallic. C) Turbine meter. B. Manometer. D) Wattmeter

Last Answer : Turbine meter

The waste gases coming out from gas turbine exhausts are of the order of: a) 370-540 b) 450 – 700 c) 700- 800 d) 250-440

Description : The waste gases coming out from gas turbine exhausts are of the order of: a) 370-540 b) 450 – 700 c) 700- 800 d) 250-440

Last Answer : 370-540

Why is exhaust steam coming out of turbine is admitted to a steam header? a) To increase the pressure b) To decrease the velocity c) To decrease the pressure drop d) To control the pollution

Description : Why is exhaust steam coming out of turbine is admitted to a steam header? a) To increase the pressure b) To decrease the velocity c) To decrease the pressure drop d) To control the pollution

Last Answer : To decrease the pressure drop

Which of the following engines was introduced by a German engineer, Nickolas Otto?  a. Gasoline engine  b. Diesel engine  c. Gas turbine  d. Thermal engine

Description : Which of the following engines was introduced by a German engineer, Nickolas Otto?  a. Gasoline engine  b. Diesel engine  c. Gas turbine  d. Thermal engine

Last Answer : Gasoline engine

Which of the following engines is the most efficient?  a. Gas turbine  b. Diesel engine  c. Carnot engine  d. Gasoline engine

Description : Which of the following engines is the most efficient?  a. Gas turbine  b. Diesel engine  c. Carnot engine  d. Gasoline engine

Last Answer : Carnot engine

Which of the following is least efficient?  a. Gas turbine  b. Diesel engine  c. Carnot engine  d. Gasoline engine

Description : Which of the following is least efficient?  a. Gas turbine  b. Diesel engine  c. Carnot engine  d. Gasoline engine

Last Answer : Gasoline engine

Open system usually encloses which of the following devices?  A. Compressor  B. Turbine  C. Nozzle  D. All of the above

Description : Open system usually encloses which of the following devices?  A. Compressor  B. Turbine  C. Nozzle  D. All of the above

Last Answer : All of the above

The efficiency and work ratio of a simple gas turbine cycle are  A.low  B.very low  C.high  D.very high

Description : The efficiency and work ratio of a simple gas turbine cycle are  A.low  B.very low  C.high  D.very high

Last Answer : Answer: B

A dash pot consists of a cylinder 10 cm in diameter in which slides a piston 12 cm long having a radial clearance of 1 mm. The cylinder is filled with oil having a viscosity of 1 poise. What will be the resistance offered by the piston to sliding with a velocity of 3 cm/sec a.1090 kg b.100 kg c.10900 kg d.10 kg e.50 kg

Description : A dash pot consists of a cylinder 10 cm in diameter in which slides a piston 12 cm long having a radial clearance of 1 mm. The cylinder is filled with oil having a viscosity of 1 poise. What will be the resistance offered ... with a velocity of 3 cm/sec a.1090 kg b.100 kg c.10900 kg d.10 kg e.50 kg

Last Answer : c. 10900 kg

How the net work to drive a compressor and its volumetric efficiency behave with increase in clearance volume ?

Description : How the net work to drive a compressor and its volumetric efficiency behave with increase in clearance volume ?

Last Answer : Work remains unaltered and volumetric efficiency decreases.

Working width of disc plough can be increased by a) Disc angle b) Gang angle c) Vertical suction d) Horizontal clearance Ans. a

Description : Working width of disc plough can be increased by a) Disc angle b) Gang angle c) Vertical suction d) Horizontal clearance Ans. a

Last Answer : ans a

A thresher causes more seed damage if 1. Speed is increased 2. Clearance is increased 3. Feed rate is reduced 4. speed is reduced

Description : A thresher causes more seed damage if 1. Speed is increased 2. Clearance is increased 3. Feed rate is reduced 4. speed is reduced

Last Answer : ans 1

If piston displacement is deducted from the total volume of cylinder the remaining volume is known as 1. piston displacement 2. Clearance volume 3. displacement volume 4.compression ratio

Description : If piston displacement is deducted from the total volume of cylinder the remaining volume is known as 1. piston displacement 2. Clearance volume 3. displacement volume 4.compression ratio

Last Answer : ans 2

The threshing efficiency of thresher depends on a) Cylinder peripheral speed b) Cylinder concave clearance c) Feed rate, moisture content and type of crop d) All are correct

Description : The threshing efficiency of thresher depends on a) Cylinder peripheral speed b) Cylinder concave clearance c) Feed rate, moisture content and type of crop d) All are correct

Last Answer :  All are correct

Identify the picture. a) Concave clearance b) Sieve clearance c) Concave units d) Grain sieve

Description : Identify the picture. a) Concave clearance b) Sieve clearance c) Concave units d) Grain sieve

Last Answer : Concave clearance

The thresher caused More seed damage if A. Speed is increases B. Clearance is increase C. Feed rate is reduced. D. Speed is reduced

Description : The thresher caused More seed damage if A. Speed is increases B. Clearance is increase C. Feed rate is reduced. D. Speed is reduced

Last Answer : Speed is increases

A tractor with fewer wheels Base, higher ground clearance may work successful in which soil A. B. 30-35 D. 40-45 Heavier C. Black cotton soil B. Wet soil D. Lighter soil

Description : A tractor with fewer wheels Base, higher ground clearance may work successful in which soil A. B. 30-35 D. 40-45 Heavier C. Black cotton soil B. Wet soil D. Lighter soil

Last Answer : Lighter soil

What are types of steam turbine and why are they popular?

Description : What are types of steam turbine and why are they popular?

Last Answer : Answer: Condensing and non-condensing, Popular because can convert large amounts of heat energy into mechanical work very efficiently.

What are four types of turbine seals?

Description : What are four types of turbine seals?

Last Answer : 1. Carbon rings fitted in segments around the shaft and held together by garter or retainer springs. 2. Labyrinth mated with shaft serration's or shaft seal strips. 3. Water seals where a ... using woven or soft packing rings that are compressed with a gland to prevent leakage along the shaft.

Explain the Need of draft tube in reaction turbine .state the types of draft tube used in it

Description : Explain the Need of draft tube in reaction turbine .state the types of draft tube used in it

Last Answer : Draft tube is a pipe of gradually increasing diameter which connects the exit of runner of turbine to tail race. In case of reaction turbine , one part of available head is converted into K.E before ... . iv. Elbow draft tube with circular cross section at inlet and rectangular at outlet.

List the types of turbine used in hydro power plant.

Description : List the types of turbine used in hydro power plant.  

Last Answer : Following types of turbine used in hydro power plant:  1.Pelton wheel 2.Francis Turbine 3.Kaplan Turbine 4.Propeller Turbine