The thresher caused More seed damage if A. Speed is increases B. Clearance is increase C. Feed rate is reduced. D. Speed is reduced

The thresher caused More seed damage if A. Speed is increases B. Clearance is increase C. Feed rate is reduced. D. Speed is reduced
by

1 Answer

Answer :

Speed is increases
by

Related questions

A thresher causes more seed damage if 1. Speed is increased 2. Clearance is increased 3. Feed rate is reduced 4. speed is reduced

Description : A thresher causes more seed damage if 1. Speed is increased 2. Clearance is increased 3. Feed rate is reduced 4. speed is reduced

Last Answer : ans 1

thresher causes more seed damage if: a speed is increased b clearance increased c speed is decreased d feed rate is reduced

Description : thresher causes more seed damage if: a speed is increased b clearance increased c speed is decreased d feed rate is reduced

Last Answer : a speed is increased

A thresh causes more seed damage if :- a. Seed is increase b. Clearance is increased c. Feed rate is reduced d. Seed is reduced

Description : A thresh causes more seed damage if :- a. Seed is increase b. Clearance is increased c. Feed rate is reduced d. Seed is reduced

Last Answer : a. Seed is increase

The threshing efficiency of thresher depends on a) Cylinder peripheral speed b) Cylinder concave clearance c) Feed rate, moisture content and type of crop d) All are correct

Description : The threshing efficiency of thresher depends on a) Cylinder peripheral speed b) Cylinder concave clearance c) Feed rate, moisture content and type of crop d) All are correct

Last Answer :  All are correct

Thresher blows broken grains with chaff due to a) Higher cylinder speed. b) More feed Rate c) More cylinder concave clearance d) Moisture content of the crop is more

Description : Thresher blows broken grains with chaff due to a) Higher cylinder speed. b) More feed Rate c) More cylinder concave clearance d) Moisture content of the crop is more

Last Answer : a) Higher cylinder speed.

Cylinder loss in a stationary power thresher can be reduced by increasing the : M. Cylinder peripheral speed N. Concave clearance O. Blower speed P. All of the above

Description : Cylinder loss in a stationary power thresher can be reduced by increasing the : M. Cylinder peCylinder loss in a stationary power thresher can be reduced by increasing the : M. Cylinder peripheral speed N. Concave clearance O. Blower speed P. All of the above

Last Answer : M. Cylinder peripheral speed

Crop factors which affecting thresher preformation. a) Variety of crop, Moisture in crop material b) Feeding chute angle, cylinder types c) Cylinder speed, feed rate d) Cylinder type, feed rate

Description : Crop factors which affecting thresher preformation. a) Variety of crop, Moisture in crop material b) Feeding chute angle, cylinder types c) Cylinder speed, feed rate d) Cylinder type, feed rate

Last Answer : Variety of crop, Moisture in crop material

Operational factors which affecting thresher preformation. a) Variety of crop, Moisture in crop material b) Feeding chute angle, cylinder type c) Cylinder speed, feed rate d) Cylinder type ,feed rate

Description : Operational factors which affecting thresher preformation. a) Variety of crop, Moisture in crop material b) Feeding chute angle, cylinder type c) Cylinder speed, feed rate d) Cylinder type ,feed rate

Last Answer : Cylinder speed, feed rate

Machine factors which affecting thresher preformation. a) Variety of crop, Moisture in crop material b) Feeding chute angle, cylinder type c) Cylinder speed, feed rate d) Cylinder type ,feed rate

Description : Machine factors which affecting thresher preformation. a) Variety of crop, Moisture in crop material b) Feeding chute angle, cylinder type c) Cylinder speed, feed rate d) Cylinder type ,feed rate

Last Answer : Feeding chute angle, cylinder type

Adjustment needed when thresher blows grains with chaff a.) Decreasing cylinder peripheral speed. b.) Increasing cylinder speed. c.) Decreasing feed rate. d.) Increasing cylinder

Description : Adjustment needed when thresher blows grains with chaff a.) Decreasing cylinder peripheral speed. b.) Increasing cylinder speed. c.) Decreasing feed rate. d.) Increasing cylinder

Last Answer : a.) Decreasing cylinder peripheral speed.

Increasing non grain feed rate increase (a) Cylinder losses (b) Seed damage (c) Both (a) and(b) (d) None of the above

Description : Increasing non grain feed rate increase (a) Cylinder losses (b) Seed damage (c) Both (a) and(b) (d) None of the above

Last Answer : (a) Cylinder losses

Increasing non-grain feed rate increase a) Cylinder losses b) seed damage c)Both (a) and (b) d) none of the above

Description : Increasing non-grain feed rate increase a) Cylinder losses b) seed damage c)Both (a) and (b) d) none of the above

Last Answer : a) Cylinder losses

In a thresher, by increasing the speed of threshing cylinder a) Threshing efficiency can be increased b) Broken grain loss can be minimized c) Un-threshed grains can be increased d) Straw breakup can be increased Ans. a

Description : In a thresher, by increasing the speed of threshing cylinder a) Threshing efficiency can be increased b) Broken grain loss can be minimized c) Un-threshed grains can be increased d) Straw breakup can be increased Ans. a

Last Answer : ans a

In case of a hammer crusher, the final product size depends on the (A) Feed rate (B) Rotor speed(C) Clearance between hammer & grinding plates(D) All (A), (B) and (C

Description : In case of a hammer crusher, the final product size depends on the (A) Feed rate (B) Rotor speed (C) Clearance between hammer & grinding plates (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

Most important factor affecting threshing efficiency a)peripheral speed of the drum b)cylinder concave clearance c)moisture content of crop d)feed rate

Description : Most important factor affecting threshing efficiency a)peripheral speed of the drum b)cylinder concave clearance c)moisture content of crop d)feed rate

Last Answer : a)peripheral speed of the drum

Increasing the cylinder speed result in (a) Increase threshing efficiency (b) Reduce cylinder loss (c) Increase seed damage (d) All of the above

Description : Increasing the cylinder speed result in (a) Increase threshing efficiency (b) Reduce cylinder loss (c) Increase seed damage (d) All of the above

Last Answer : (a) Increase threshing efficiency

Increasing the cylinder speed result in a) Increase threshing efficiency b) Reduce cylinder loss c) Increase seed damage d) All of the above

Description : Increasing the cylinder speed result in a) Increase threshing efficiency b) Reduce cylinder loss c) Increase seed damage d) All of the above

Last Answer : d) All of the above

It is a machine designed for harvesting ,threshing,separating, cleaning and collecting grains while moving through standing crops. a. Weeder b. thresher d. None of above

Description : It is a machine designed for harvesting ,threshing,separating, cleaning and collecting grains while moving through standing crops. a. Weeder b. thresher d. None of above

Last Answer : Ans-          c. COMBINE

This type thresher consists of a flywheel with corrugation on its periphery and sides. Rims of flywheel fitted with chopping blades. b. Axial flow c. Dummy d. None of above

Description : This type thresher consists of a flywheel with corrugation on its periphery and sides. Rims of flywheel fitted with chopping blades. b. Axial flow c. Dummy d. None of above

Last Answer : Ans-    a. Syndicator

This type thresher consists of corrugated bars are mounted axially on pheripheri of the cylinder. a. Hammer mill c. Dummy d. None of above

Description : This type thresher consists of corrugated bars are mounted axially on pheripheri of the cylinder. a. Hammer mill c. Dummy d. None of above

Last Answer : Ans-    b. Raspbar

This type thresher consists of beater mounted on a shaft which rotates inside a closed casing and concave. a. Hammer mill b. Spike tooth d. None of above

Description : This type thresher consists of beater mounted on a shaft which rotates inside a closed casing and concave. a. Hammer mill b. Spike tooth d. None of above

Last Answer : Ans-                             c. Dummy

Different parts of Thresher are A) Feeding device B) Threshing cylinder C) Concave D) All of the above.

Description : Different parts of Thresher are A) Feeding device B) Threshing cylinder C) Concave D) All of the above.

Last Answer : All of the above.

The Japanese type rotary thresher is used for threshing a) Paddy b) Wheat c) Sunflower d) Safflower

Description : The Japanese type rotary thresher is used for threshing a) Paddy b) Wheat c) Sunflower d) Safflower

Last Answer : Paddy 

The spacing between two adjacent discs in Olpad thresher is a) 5 cm b) 10 cm c) 15 cm d) 20 cm

Description : The spacing between two adjacent discs in Olpad thresher is a) 5 cm b) 10 cm c) 15 cm d) 20 cm

Last Answer : 15 cm

A multi type thresher is equipped with a) Spike tooth cylinder b) Rasp bar cylinder c) Hammer mill cylinder d) All of the above

Description : A multi type thresher is equipped with a) Spike tooth cylinder b) Rasp bar cylinder c) Hammer mill cylinder d) All of the above

Last Answer : All of the above

The dummy type thresher is also termed as a) Rasp bar type thresher b) Hammer mill type thresher c) Spike tooth type thresher d) Syndicator tooth type thresher

Description : The dummy type thresher is also termed as a) Rasp bar type thresher b) Hammer mill type thresher c) Spike tooth type thresher d) Syndicator tooth type thresher

Last Answer : Hammer mill type thresher

machine designed for harvesting, threshing , cleaning and collecting grains while moving through standing crops. a) Combine b) Self operated VCR c) Power roller thresher d) Post harvesting technology

Description : machine designed for harvesting, threshing , cleaning and collecting grains while moving through standing crops. a) Combine b) Self operated VCR c) Power roller thresher d) Post harvesting technology

Last Answer : Combine 

A large clearance volume in a reciprocating compressor results in A. Reduced volume flow rate B. Increased volume flow rate C. Lower suction pressure D. Lower delivery pressure

Description : A large clearance volume in a reciprocating compressor results in A. Reduced volume flow rate B. Increased volume flow rate C. Lower suction pressure D. Lower delivery pressure

Last Answer : ANSWER : A

A large clearance volume in reciprocating compressor results in A. reduced volume flow rate B. Increased volume flow rate C. Lower suction pressure D. Lower delivery pressure

Description : A large clearance volume in reciprocating compressor results in A. reduced volume flow rate B. Increased volume flow rate C. Lower suction pressure D. Lower delivery pressure

Last Answer : ANSWER : A

How the net work to drive a compressor and its volumetric efficiency behave with increase in clearance volume ?

Description : How the net work to drive a compressor and its volumetric efficiency behave with increase in clearance volume ?

Last Answer : Work remains unaltered and volumetric efficiency decreases.

This type seed metering mechanism consist of wheel with fine and coarse ribbed flanges. b. fluted feed c. Cup feed d. None of the above

Description : This type seed metering mechanism consist of wheel with fine and coarse ribbed flanges. b. fluted feed c. Cup feed d. None of the above

Last Answer : Ans - a. Internal double run

For sowing of wheat seed, a suitable metering mechanism is: A. Cup feed B. Cell feed C. Fluted roller D. Brush feed

Description : For sowing of wheat seed, a suitable metering mechanism is: A. Cup feed B. Cell feed C. Fluted roller D. Brush feed

Last Answer : Fluted roller

is the type of seed metering mechanism. a) Fluted feed type b) Cup feed type c) Brush feed mechanism d) All of above

Description : is the type of seed metering mechanism. a) Fluted feed type b) Cup feed type c) Brush feed mechanism d) All of above

Last Answer : All of above

With increase in the order of reaction (for all positive reaction orders), the ratio of the volume of mixed reactor to the volume of plug flow reactor (for identical feed composition, flow rate and conversion). (A) Increases (B) Decreases (C) Remain same (D) Increases linearly

Description : With increase in the order of reaction (for all positive reaction orders), the ratio of the volume of mixed reactor to the volume of plug flow reactor (for identical feed composition, flow rate and conversion). (A) Increases (B) Decreases (C) Remain same (D) Increases linearly

Last Answer : (A) Increases

The seed rate can be increased by a) Decreasing the exposure length b) Increasing the exposure length c) Increasing speed d) Decreasing speed Ans. b

Description : The seed rate can be increased by a) Decreasing the exposure length b) Increasing the exposure length c) Increasing speed d) Decreasing speed Ans. b

Last Answer : ans b

In cup food metering device, the seed rate is controlled by: A. Shaft rotation B. Speed of machine C. Size of cups D. All are correct

Description : In cup food metering device, the seed rate is controlled by: A. Shaft rotation B. Speed of machine C. Size of cups D. All are correct

Last Answer :  Size of cups

Optimum speed for grains like gram,pea,etc.,thresher using power is a) 300-400rpm b) 400-600rpm c) 600-800rpm d) 1100-1200rpm

Description : Optimum speed for grains like gram,pea,etc.,thresher using power is a) 300-400rpm b) 400-600rpm c) 600-800rpm d) 1100-1200rpm

Last Answer : a) 300-400rpm

Optimum operating cylinder speed for wheat threshing using power operated thresher is a) 300-400rpm b) 400-600rpm c) 600-800rpm d) 1100-1200rpm

Description : Optimum operating cylinder speed for wheat threshing using power operated thresher is a) 300-400rpm b) 400-600rpm c) 600-800rpm d) 1100-1200rpm

Last Answer : d) 1100-1200rpm

Volumetric efficiency of a compressor without clearance volume A. Increases with increase in compression ratio B. Decreases wit increase in compression ratio C. Not dependent upon compression ratio D. Unpredictable

Description : Volumetric efficiency of a compressor without clearance volume A. Increases with increase in compression ratio B. Decreases wit increase in compression ratio C. Not dependent upon compression ratio D. Unpredictable

Last Answer : ANSWER : C

Which one of the following statement is not correct for the volumetric efficiency of a reciprocating air compressor? A. It decreases with increase in ambient temperature B. It increases with decrease in pressure ratio C. It increases with decrease in clearance ratio D. It decreases with increases in delivery pressure

Description : Which one of the following statement is not correct for the volumetric efficiency of a reciprocating air compressor? A. It decreases with increase in ambient temperature B. It increases with ... It increases with decrease in clearance ratio D. It decreases with increases in delivery pressure

Last Answer : ANSWER : A

Consider the following statements associated with the germination of an angiospermous seed: (1) As the seed gets hydrated and germinates, enzymatic activity is increased (2) The respiration rate of the germinating seed increases along with the increased enzymatic activity (3) The increase in the respiratory rate continues till senescence (4) Rate of enzymatic activity decreases

Description : Consider the following statements associated with the germination of an angiospermous seed: (1) As the seed gets hydrated and germinates, enzymatic activity is increased (2) The respiration ... The increase in the respiratory rate continues till senescence (4) Rate of enzymatic activity decreases

Last Answer : Ans. ((b))

Unnecessary and frequent applications of varnish to the generator windings to repair defective insulation will result in ____________. A. heavy coatings of varnish interfering with heat dissipation B. deficient air gap clearance and eventual damage to the casing C. failure of the rectifier assembly D. a built-up of varnish without changing generator operation

Description : Unnecessary and frequent applications of varnish to the generator windings to repair defective insulation will result in ____________. A. heavy coatings of varnish interfering with heat dissipation B. ... of the rectifier assembly D. a built-up of varnish without changing generator operation

Last Answer : Answer: A

60-year-old patient with creatinine clearance 50 ml/min has to be treated with gentamicin. His daily dose of gentamicin should be reduced to the following percentage of the usual adult dose: A. 70% B. 50% C. 40% D. 30%

Description : 60-year-old patient with creatinine clearance 50 ml/min has to be treated with gentamicin. His daily dose of gentamicin should be reduced to the following percentage of the usual adult dose: A. 70% B. 50% C. 40% D. 30%

Last Answer : B. 50%

A 60-year-old patient with creatinine clearance 50 ml/min has to be treated with gentamicin. His daily dose of gentamicin should be reduced to the following percentage of the usual adult dose: A. 70% B. 50% C. 40% D. 30%

Description : A 60-year-old patient with creatinine clearance 50 ml/min has to be treated with gentamicin. His daily dose of gentamicin should be reduced to the following percentage of the usual adult dose: A. 70% B. 50% C. 40% D. 30%

Last Answer : B. 50%

In patients with renal insufficiency the clearance of the following drug is reduced parallel to the reduction in creatinine clearance: A. Propranolol B. Digoxin C. Lignocaine D. Verapamil

Description : In patients with renal insufficiency the clearance of the following drug is reduced parallel to the reduction in creatinine clearance: A. Propranolol B. Digoxin C. Lignocaine D. Verapamil

Last Answer : B. Digoxin

In patients with renal insufficiency the clearance of the following drug is reduced parallel to the reduction in creatinine clearance: A. Propranolol B. Digoxin C. Lignocaine D. Verapamil

Description : In patients with renal insufficiency the clearance of the following drug is reduced parallel to the reduction in creatinine clearance: A. Propranolol B. Digoxin C. Lignocaine D. Verapamil

Last Answer : B. Digoxin

Increase in values of which of the following results in an increase of the coefficient of friction in a hydrodynamic bearing? [IES 2007] 1. Viscosity of the oil. 2. Clearance between shaft and bearing. 3. Shaft speed. Select the using the code given below: (a) 1 and 2 only (b) 1 and 3 only (c) 2 and 3 only (d) 1, 2 and 3

Description : Increase in values of which of the following results in an increase of the coefficient of friction in a hydrodynamic bearing? [IES 2007] 1. Viscosity of the oil. 2. Clearance between shaft and bearing. 3. Shaft speed. Select the ... 1 and 2 only (b) 1 and 3 only (c) 2 and 3 only (d) 1, 2 and 3

Last Answer : (b) 1 and 3 only

.total grain loss in a combine increase with a. increase in forward speed b. decrease in stubble Hight c. increase in concave clearance d. all of the above

Description : .total grain loss in a combine increase with a. increase in forward speed b. decrease in stubble Hight c. increase in concave clearance d. all of the above

Last Answer : .total grain loss in a combine increase with a. increase in forward speed b. decrease in stubble Hight c. increase in concave clearance d. all of the above

If the clearance of a drug remains constant, doubling the dose rate will increase the steady-state plasma drug concentration by a factor of: A. × 3 B. × 2 C. × 1.5 D. × 1.3

Description : If the clearance of a drug remains constant, doubling the dose rate will increase the steady-state plasma drug concentration by a factor of: A. × 3 B. × 2 C. × 1.5 D. × 1.3

Last Answer : B. × 2

If the clearance of a drug remains constant, doubling the dose rate will increase the steady-state plasma drug concentration by a factor of: A. × 3 B. × 2 C. × 1.5 D. × 1.3

Description : If the clearance of a drug remains constant, doubling the dose rate will increase the steady-state plasma drug concentration by a factor of: A. × 3 B. × 2 C. × 1.5 D. × 1.3

Last Answer : B. × 2