Identify the picture. a) Concave clearance b) Sieve clearance c) Concave units d) Grain sieve

1 Answer

Answer :

Concave clearance

Related questions

Description : .total grain loss in a combine increase with a. increase in forward speed b. decrease in stubble Hight c. increase in concave clearance d. all of the above

Last Answer : .total grain loss in a combine increase with a. increase in forward speed b. decrease in stubble Hight c. increase in concave clearance d. all of the above

Description : The threshing efficiency of thresher depends on a) Cylinder peripheral speed b) Cylinder concave clearance c) Feed rate, moisture content and type of crop d) All are correct

Last Answer :  All are correct

Description : The takes place between the cylinder and concave units of the combine. a) Threshing b) Feeding drum c) Straw spreader d) Separating

Last Answer : Threshing 

Description : Thresher blows broken grains with chaff due to a) Higher cylinder speed. b) More feed Rate c) More cylinder concave clearance d) Moisture content of the crop is more

Last Answer : a) Higher cylinder speed.

Description : Most important factor affecting threshing efficiency a)peripheral speed of the drum b)cylinder concave clearance c)moisture content of crop d)feed rate

Last Answer : a)peripheral speed of the drum

Description : Cylinder loss in a stationary power thresher can be reduced by increasing the : M. Cylinder peCylinder loss in a stationary power thresher can be reduced by increasing the : M. Cylinder peripheral speed N. Concave clearance O. Blower speed P. All of the above

Last Answer : M. Cylinder peripheral speed

Description : Identify the picture. a) Hummer mill type b) Spike-tooth type c) Dummy type d) Axial flow type

Last Answer : Hummer mill type

Description : Identify the two components of Phloem tissue that help in transportation of food in plants (a) Phloem parenchyma & sieve tubes (b) Sieve tubes & companion cell. (c) Phloem parenchyma & companion cell. (d) Phloem fibres and sieve tubes

Last Answer : (b) Sieve tubes & companion cell.

Description : A virtual image can be formed by one or more of the following single mirrors? Identify them. w) plane mirror x) concave spherical mirror y) convex spherical mirror z) all of the above

Last Answer : ANSWER: Z -- ALL OF THE ABOVE (accept: A, B and C) 

Description : This type threasher consist of spike tooth cylinder, woven wire mesh concave and upper casing provide with helical louvers. a. Hammer mill c. Dummy d. None of above

Last Answer : Ans-    b. Axial flow

Description : This type thresher consists of beater mounted on a shaft which rotates inside a closed casing and concave. a. Hammer mill b. Spike tooth d. None of above

Last Answer : Ans-                             c. Dummy

Description : Tractor drawn disc harrows have concave discs of size varying from… diameter. a. 55-90cm b. 60-100cm d. None of the above

Last Answer : Ans - c. 35-70cm

Description : is a circular concave revolving steel plate using for cutting and inverting the soil. a. Gang bolt. c. Disc b. Bearing d. None

Last Answer : Bearing 

Description : Different parts of Thresher are A) Feeding device B) Threshing cylinder C) Concave D) All of the above.

Last Answer : All of the above.

Description : are mounted on the Periphery of a cylinder that rotates inside a closed casing and concave. a) Dummy type c) spike-tooth type b) Hummer type d) Axial flow type

Last Answer : spike-tooth type

Description : It consists of spike tooth cylinder, woven- wire mesh concave and upper casing provided with helical concave. a) Dummy type c) Spike-tooth type b) Hummer type d) Axial flow type

Last Answer : Axial flow type

Description : It consists of beats mounted on a shaft which rotates inside a closed casing and concave. a) Dummy type c) Spike-tooth type c) Hummer type d) Axial flow type

Last Answer : Dummy type

Description : plows are rows of concave steel discs that revolve as they are pulled. A. Disk. C) Chisel B. Tined. D) Sub soiling .

Last Answer : Disk

Description : In a thresher, by increasing the speed of threshing cylinder a) Threshing efficiency can be increased b) Broken grain loss can be minimized c) Un-threshed grains can be increased d) Straw breakup can be increased Ans. a

Last Answer : ans a

Description : Bureau of Indian standards has specified that the total grain loss should not be more than 5% in which broken grain should be less than 2%. a. 3% b. 2.5% d. None of above

Last Answer : Ans-      c. 2%.

Description : It is a machine to separate grains from the harvested crop and provide clean grain without much loss and damage. a. Weeder c. mower d. None of above

Last Answer : Ans-                              b. thresher  

Description : It is a machine to cut grain crops. a. Weeder b. thrasher d. None of above

Last Answer : Ans-             c. Reaper  

Description : is the limit percentage for grain loss in India. a) 1.5 % b) 15% c) 5 % c) 7.26 %

Last Answer : 5 %

Description : To separate grains from the harvested crop and provide clean grain without much loss and damage which called as A) Potato digger elevator B) Groundnut digger shaker C) Reaper binder D) Threshing

Last Answer : Threshing

Description : Most grain and seed crops are harvested with combined harvest threshers, commonly known as..... A) Combines B) Different C) Crops D) None of above

Last Answer : Combines

Description : Which of the following comes under grain processing in India? a) Oil seed processing . c) Wheat processing b) Oil seed & Wheat processing. d) None of the mentioned

Last Answer :  Oil seed & Wheat processing

Description : A dash pot consists of a cylinder 10 cm in diameter in which slides a piston 12 cm long having a radial clearance of 1 mm. The cylinder is filled with oil having a viscosity of 1 poise. What will be the resistance offered ... with a velocity of 3 cm/sec a.1090 kg b.100 kg c.10900 kg d.10 kg e.50 kg

Last Answer : c. 10900 kg

Description : How the net work to drive a compressor and its volumetric efficiency behave with increase in clearance volume ?

Last Answer : Work remains unaltered and volumetric efficiency decreases.

Description : What Are Two Types Of Clearance In A Turbine?

Last Answer : 1. Radial – clearance at the tips of the rotor and casing. 2. Axial – the foreandaft clearance, at the sides of the rotor and the casing.

Description : Working width of disc plough can be increased by a) Disc angle b) Gang angle c) Vertical suction d) Horizontal clearance Ans. a

Last Answer : ans a

Description : A thresher causes more seed damage if 1. Speed is increased 2. Clearance is increased 3. Feed rate is reduced 4. speed is reduced

Last Answer : ans 1

Description : If piston displacement is deducted from the total volume of cylinder the remaining volume is known as 1. piston displacement 2. Clearance volume 3. displacement volume 4.compression ratio

Last Answer : ans 2

Description : The thresher caused More seed damage if A. Speed is increases B. Clearance is increase C. Feed rate is reduced. D. Speed is reduced

Last Answer : Speed is increases

Description : A tractor with fewer wheels Base, higher ground clearance may work successful in which soil A. B. 30-35 D. 40-45 Heavier C. Black cotton soil B. Wet soil D. Lighter soil

Last Answer : Lighter soil

Description : Ava and David are playing a game on a number line.Ava’s game piece is 2 units away from Ava’s. Which picture could show their game Pieces on the number line?

Last Answer : 1 4

Description : Can you identify this plant (picture included)?

Last Answer : Maybe a ti plant?

Description : can I send you a picture of a plant ? I can't identify it ...

Last Answer : Need Answer

Description : Answer the following: (i) Identify the persons in the picture given above. -SST 10th

Last Answer : (i) The person in the picture is Lala Lajpat Rai. (ii) Lala Lajpat Rai was an outstanding leader of assertive section of congress. His ultimate objective was the attainment of “Swaraj”, complete independence.

Description : Identify the picture as shown and answer the following: -SST 10th

Last Answer : (i) This picture is associated with the Dandi March. (ii) Dandi March was started on 12 March 1930 from Sabarmati Ashram at Ahmedabad.

Description : A Pixel is a.a computer program that draws picture b.A picture stored in secondary memory c.The smallest resolvable part of a picture d.All of the above

Last Answer : c.The smallest resolvable part of a picture

Description : Any convenient co-ordinate system or Cartesian co-ordinates which can be usedto define the picture is called a.spherical co-ordinates b.vector co-ordinates c.viewport co-ordinates d.world co-ordinates

Last Answer : d.world co-ordinates

Description : If the value of Sx=1 and Sy=1 then a.Reduce the size of object b.Distort the picture c.Produce an enlargement d.No change in the size of an object

Last Answer : d.No change in the size of an object

Description : What is a sieve area? -Biology

Last Answer : answer:

Description : What do sieve tube elements do? -Biology

Last Answer : answer:

Description : What are sieve tube elements? -Biology

Last Answer : answer:

Last Answer : The process of purifying water with a sieve is called sieving.

Description : $ Sieve tubes have "P" proteins. ! In gymnosperms, sieve tubes are associated with albuminous cells.

Last Answer : $ Sieve tubes have "P" proteins. ! In gymnosperms, sieve tubes are associated with albuminous cells. A. If ... is wrong D. If both As and R are wrong.

Description : Why is it necessary to sieve the soil samples using 2mm sieve?

Last Answer : Need answer

Description : What is the difference between a filter and a sieve?

Last Answer : filter paper is paper and a sieve is a kitchen utensil used to put objects (pasta,rice) and drain water.filter paper is used to seperate smaller granules (sand etc.) and a sieve is used to seperate larger granules(peas, rice, pasta etc.)

Description : Tyloses are: (a) Lactiferous channels (b) Secretory cells (c) Sieve plates (d) Tracheal plugs plugging the lumen of vessels and tracheids

Last Answer : Ans. ((d))