Why gas turbine power plant needs efficient compressor ?

Why gas turbine power plant needs efficient compressor ?
by

1 Answer

Answer :

Because a large portion of turbine work is eaten away by compressor and its inefficiency will affect net
power output and cost of generation.
by

Related questions

Open system usually encloses which of the following devices?  A. Compressor  B. Turbine  C. Nozzle  D. All of the above

Description : Open system usually encloses which of the following devices?  A. Compressor  B. Turbine  C. Nozzle  D. All of the above

Last Answer : All of the above

Which of the following engines is the most efficient?  a. Gas turbine  b. Diesel engine  c. Carnot engine  d. Gasoline engine

Description : Which of the following engines is the most efficient?  a. Gas turbine  b. Diesel engine  c. Carnot engine  d. Gasoline engine

Last Answer : Carnot engine

Which of the following is least efficient?  a. Gas turbine  b. Diesel engine  c. Carnot engine  d. Gasoline engine

Description : Which of the following is least efficient?  a. Gas turbine  b. Diesel engine  c. Carnot engine  d. Gasoline engine

Last Answer : Gasoline engine

Which of the following processes cannot be made reversible even under ideal condition of operation? (A) Free expansion of a gas (B) Compression of air in a compressor (C) Expansion of steam in a turbine (D) All (A), (B) & (C)

Description : Which of the following processes cannot be made reversible even under ideal condition of operation? (A) Free expansion of a gas (B) Compression of air in a compressor (C) Expansion of steam in a turbine (D) All (A), (B) & (C)

Last Answer : (A) Free expansion of a gas

Gas cooling as compared to water cooling of nuclear reactors (A) Cannot attain a high temperature (B) Is more efficient as gas has a higher specific heat (C) Can produce only saturated steam for feeding to power turbine (D) None of these

Description : Gas cooling as compared to water cooling of nuclear reactors (A) Cannot attain a high temperature (B) Is more efficient as gas has a higher specific heat (C) Can produce only saturated steam for feeding to power turbine (D) None of these

Last Answer : (D) None of these

Why thermal efficiency of I.C. engines is more than that of gas turbine plant ?

Description : Why thermal efficiency of I.C. engines is more than that of gas turbine plant ?

Last Answer : In I.C. engine maximum temperature attained is higher than in gas turbine.

Which one of the following is correct? A. In a multistage compressor adiabatic efficiency is less than stage efficiency B. In a multistage turbine adiabatic efficiency is less than the stage efficiency C. Preheat factor for a multistage compressor is greater than one D. Preheat factor does not affect the multistage compressor performance

Description : Which one of the following is correct? A. In a multistage compressor adiabatic efficiency is less than stage efficiency B. In a multistage turbine adiabatic efficiency is less than the stage ... compressor is greater than one D. Preheat factor does not affect the multistage compressor performance

Last Answer : ANSWER : A

The waste gases coming out from gas turbine exhausts are of the order of: a) 370-540 b) 450 – 700 c) 700- 800 d) 250-440

Description : The waste gases coming out from gas turbine exhausts are of the order of: a) 370-540 b) 450 – 700 c) 700- 800 d) 250-440

Last Answer : 370-540

Which of the following engines was introduced by a German engineer, Nickolas Otto?  a. Gasoline engine  b. Diesel engine  c. Gas turbine  d. Thermal engine

Description : Which of the following engines was introduced by a German engineer, Nickolas Otto?  a. Gasoline engine  b. Diesel engine  c. Gas turbine  d. Thermal engine

Last Answer : Gasoline engine

The efficiency and work ratio of a simple gas turbine cycle are  A.low  B.very low  C.high  D.very high

Description : The efficiency and work ratio of a simple gas turbine cycle are  A.low  B.very low  C.high  D.very high

Last Answer : Answer: B

Gas turbine cycle consists of  (a) two isothermals and two isentropics  (b) two isentropics and two constant volumes  (c) two isentropics, one constant volume and one constant pressure  (d) two isentropics and two constant pressures  (e) none of the above.

Description : Gas turbine cycle consists of  (a) two isothermals and two isentropics  (b) two isentropics and two constant volumes  (c) two isentropics, one constant volume and one constant pressure  (d) two isentropics and two constant pressures  (e) none of the above.

Last Answer : Answer : d

Why axial flow compressor is preferred for gas turbines for aeroplanes ?

Description : Why axial flow compressor is preferred for gas turbines for aeroplanes ?

Last Answer : Because it has low frontal area.

What Is A Gas Compressor Used For?

Description : What Is A Gas Compressor Used For?

Last Answer : A gas compressor is a mechanical device that increases the pressure of a gas by reducing its volume. An air compressor is a specific type of gas compressor. Compressors are similar to pumps: both increase the pressure on a fluid and both can transport the fluid through a pipe.

The compression of the gas in two or more cylinders in place of a single cylinder compressor  a. Single Staging  b. Double Staging  c. Multistaging  d. None of the above

Description : The compression of the gas in two or more cylinders in place of a single cylinder compressor  a. Single Staging  b. Double Staging  c. Multistaging  d. None of the above

Last Answer : Multistaging

How Much Air Will I Need To Power My Air Compressor Tool?

Description : How Much Air Will I Need To Power My Air Compressor Tool?

Last Answer : Generally, most air tools will take around 70-100 PSI, and will consume less than 10 CFM, however consult the manual or manufacturer of your tool for exact air requirements.

Power saving guide label is stickled on_______ A. Internal parts of AC C. On condenser and compressor B. External cover of AC D. On back cover of AC

Description : Power saving guide label is stickled on_______ A. Internal parts of AC C. On condenser and compressor B. External cover of AC D. On back cover of AC

Last Answer : External cover of AC

Which power plant has minimum operating cost? a) Hydroelectric power plant b) Thermal power plant c) Nuclear power plant d) Gas Turbine Power Plant Ans: A 42. Which of the following have highest operating cost? a) Hydroelectric power plant b) Thermal power plant c) Nuclear power plant d) Solar electric power plant

Description : Which power plant has minimum operating cost? a) Hydroelectric power plant b) Thermal power plant c) Nuclear power plant d) Gas Turbine Power Plant Ans: A 42. Which of the following have ... a) Hydroelectric power plant b) Thermal power plant c) Nuclear power plant d) Solar electric power plant

Last Answer : Ans: B

What is the purpose of intercooler in gas turbine power plant?

Description : What is the purpose of intercooler in gas turbine power plant?

Last Answer : Since the power required to compress the air is less in isothermal process it is required to maintain the, temperature of air constant as far as possible. Hence the air leaving the L.P. compressor is cooled by intercooler and then passed to the H.P compressor.

What Is The Purpose Of Inter Cooler In Gas Turbine Power Plant?

Description : What Is The Purpose Of Inter Cooler In Gas Turbine Power Plant?

Last Answer : Since the power required compressing the air is less in isothermal process it is required to maintain the, temperature of air constant as far as possible. Hence the air leaving the L.P. compressor is cooled by intercooler and then passed to the H.P compressor.

Draw and label the gas turbine power plant

Description : Draw and label the gas turbine power plant

Last Answer : OR

A gas turbine power plant is best suited for

Description : A gas turbine power plant is best suited for (a) base load (b) peak load (c) emergency purpose (d) None of the above

Last Answer : A gas turbine power plant is best suited for peak load operation

Which of the following needs to be incorporated to prevent the low pressure turbine exhaust wetness from being excessive? a) Double regeneration b) Double carbonization c) Double reheat d) Double cooling

Description : Which of the following needs to be incorporated to prevent the low pressure turbine exhaust wetness from being excessive? a) Double regeneration b) Double carbonization c) Double reheat d) Double cooling

Last Answer : c) Double reheat

What Is A Stage In A Steam Turbine?

Description : What Is A Stage In A Steam Turbine?

Last Answer : In an impulse turbine, the stage is a set of moving blades behind the nozzle. In a reaction turbine, each row of blades is called a "stage." A single Curtis stage may consist of two or more rows of moving blades.

What Are Two Types Of Clearance In A Turbine?

Description : What Are Two Types Of Clearance In A Turbine?

Last Answer : 1. Radial – clearance at the tips of the rotor and casing. 2. Axial – the foreandaft clearance, at the sides of the rotor and the casing.

What Are Four Types Of Turbine Seals?

Description : What Are Four Types Of Turbine Seals?

Last Answer : 1. Carbon rings fitted in segments around the shaft and held together by garter or retainer springs. 2. Labyrinth mated with shaft serration's or shaft seal strips. 3. Water seals where a shaft ... using woven or soft packing rings that are compressed with a gland to prevent leakage along the shaft.

What Is A Radialflow Turbine?

Description : What Is A Radialflow Turbine?

Last Answer : In a radialflow turbine, steam flows outward from the shaft to the casing. The unit is usually a reaction unit, having both fixed and moving blades.

The instrument for measurement of flow/ velocity is________. A. Bimetallic. C) Turbine meter. B. Manometer. D) Wattmeter

Description : The instrument for measurement of flow/ velocity is________. A. Bimetallic. C) Turbine meter. B. Manometer. D) Wattmeter

Last Answer : Turbine meter

Why is exhaust steam coming out of turbine is admitted to a steam header? a) To increase the pressure b) To decrease the velocity c) To decrease the pressure drop d) To control the pollution

Description : Why is exhaust steam coming out of turbine is admitted to a steam header? a) To increase the pressure b) To decrease the velocity c) To decrease the pressure drop d) To control the pollution

Last Answer : To decrease the pressure drop

How the net work to drive a compressor and its volumetric efficiency behave with increase in clearance volume ?

Description : How the net work to drive a compressor and its volumetric efficiency behave with increase in clearance volume ?

Last Answer : Work remains unaltered and volumetric efficiency decreases.

Why the work per kg of air flow in axial flow compressor is less compared to centrifugal compressor for same pressure ratio ?

Description : Why the work per kg of air flow in axial flow compressor is less compared to centrifugal compressor for same pressure ratio ?

Last Answer : Isentropic efficiency of axial flow compressor is higher.

Under what condition the work done in reciprocating compressor will be least ?

Description : Under what condition the work done in reciprocating compressor will be least ?

Last Answer : It is least when compression process approaches isothermal. For this purpose, attempts are made to cool the air during compression.

Which is an example of closed system? (A) Air compressor (B) Liquid cooling system of an automobile (C) Boiler (D) None of these

Description : Which is an example of closed system? (A) Air compressor (B) Liquid cooling system of an automobile (C) Boiler (D) None of these

Last Answer : (B) Liquid cooling system of an automobile

What Is The Use Of Compressor In Refrigeration?

Description : What Is The Use Of Compressor In Refrigeration?

Last Answer : The compressor does exactly as its name says: it compresses the refrigerant. The compressor receives low pressure gas from the evaporator and converts it to high pressure gas. As mentioned earlier, as the gas is compressed, the temperature rises. The hot refrigerant gas then flows to the condenser.

What Is A Rotary Air Compressor?

Description : What Is A Rotary Air Compressor?

Last Answer : A rotary-screw compressor is a type of gas compressor that uses a rotary-type positivedisplacement mechanism. They are commonly used to replace piston compressors where large volumes of high- ... either for large industrial applications or to operate high-power air tools such as jackhammers.

How Does A Refrigerant Compressor Work?

Description : How Does A Refrigerant Compressor Work?

Last Answer :  The compressor constricts the refrigerant vapor, raising its pressure, and pushes it into the coils on the outside of the refrigerator.  When the hot gas in the coils meets the cooler air ... it becomes a liquid.  The refrigerant absorbs the heat inside the fridge, cooling down the air.

Why Is A Compressor Used In Refrigeration?

Description : Why Is A Compressor Used In Refrigeration?

Last Answer : The compressor does exactly as its name says: it compresses the refrigerant. The compressor receives low pressure gas from the evaporator and converts it to high pressure gas. As mentioned earlier, as the gas is compressed, the temperature rises. The hot refrigerant gas then flows to the condenser.

Why Compressor Shuts Down On High-temperature?

Description : Why Compressor Shuts Down On High-temperature?

Last Answer : If your compressor trips on over temeprature, it could be any of the following:  Ambient temperature too high or not enough ventilation.  Too low oil level.  Wrong type of oil.  Dirty oil cooler.  Thermostatic valve not working.  Dirt / obstruction in oil lines.

Why Doesn't My Air Compressor Produce As Much Air As It Used To?

Description : Why Doesn't My Air Compressor Produce As Much Air As It Used To?

Last Answer : The most common cause is bad valves. It is also important to check your entire system for higher air consumption or leaks.

Why Does The Safety Valve On My Compressor Pump Make A "popping" Sound?

Description : Why Does The Safety Valve On My Compressor Pump Make A "popping" Sound?

Last Answer : This is most commonly an indication of bad valves. Depending on the model valves could be rebuilt or replaced.

Why Does My Compressor Leak Air When The Compressor Shuts Off?

Description : Why Does My Compressor Leak Air When The Compressor Shuts Off?

Last Answer : Most air compressors have a one way check valve between the compressor pump and the air receiver. When the compressor shuts off the check valve prevents the high pressure air from traveling back ... more common types are pressure switch mounted or centrifugal mounted on the end of the crankshaft.

Will My Small Homeowner Air Compressor Be Able To Handle An Extra Tank?

Description : Will My Small Homeowner Air Compressor Be Able To Handle An Extra Tank?

Last Answer : It depends on whether or not you have a continuous duty air compressor or not. A continuous duty compressor means that it is able to run for long periods of time (aka continuously). This type of ... that you give it time to cool off when filling the tank, otherwise you would be going overboard.

What Is The Difference Between A Rotary Screw Compressor And A Reciprocating Compressors?

Description : What Is The Difference Between A Rotary Screw Compressor And A Reciprocating Compressors?

Last Answer : A rotary screw compressor is one that utilizes two intermeshing helical rotors to trap a volume of air, then compress it to a higher pressure. Rotary screw compressors can be run at lower ... piston compressor (aka reciprocating) uses pistons driven by a crankshaft to deliver air at high pressure.

How Often Until A New Compressor Is 'broken In'?

Description : How Often Until A New Compressor Is 'broken In'?

Last Answer : Air Compressors do not need to be broken in. Check for any leaks or malfunctions during the first start-up, but after that you should be ready to go.

What Is The Maximum Hose Length I Should Use With My Compressor?

Description : What Is The Maximum Hose Length I Should Use With My Compressor?

Last Answer : This will also depend on the size of compressor and CFM required. The Maximum hose length is one of the most open ended questions related to air compressors. For a small homeowner unit, it would ... , contact your local installation provider or give us a call to help figure out your maximum length.

What Happens When Water Stays In My Compressor?

Description : What Happens When Water Stays In My Compressor?

Last Answer : Compressor tanks are made of steel, which means if water is left in the tank, rust will start to accrue. Depending on the severity, contact your local service center about the best way to eliminate ... One place to start would be to look into purchasing an air dryer, to help eliminate the problem.

Will My Compressor Run On A Generator?

Description : Will My Compressor Run On A Generator?

Last Answer : The compressor should be able to run given the proper requirements, however we recommend not using a compressor with a generator. Generators have fluctuations in power, and because a compressor needs constant voltage ... to run, it is generally best not to use a generator if no power is available.

Is Amp Draw Of The Compressor Something I Need To Be Concerned With?

Description : Is Amp Draw Of The Compressor Something I Need To Be Concerned With?

Last Answer : Yes, the lower the amp draw, the better the compressor is. As a rule of thumb, the maximum amperage that a compressor should require is 30amps.

Is It Possible To Use An Adjustable Pressure Switch With My Compressor?

Description : Is It Possible To Use An Adjustable Pressure Switch With My Compressor?

Last Answer : May not use adjustable pressure switches with any VIAIR compressor. If you use an adjustable pressure switch, you can set the pressure switch higher than the maximum pressure that is rated for your ... supply tank. Doing so will immediately void your warranty, not to mention, it is dangerous.

Is It Possible To Hook Up More Than One Compressor To A Single Pressure Switch?

Description : Is It Possible To Hook Up More Than One Compressor To A Single Pressure Switch?

Last Answer : Yes, it is possible to use one pressure switch on more than one compressor. You should always run a relay if you want to hook up multiple compressors to a single switch. You should check the amp draw on the switch first, and then you’ll know how many compressors you can hook up to one switch.

If I Mount My Compressor Sideways, Like On The Frame Rail Of My Truck, Is There Anything I Should Be Careful Of When Doing This?

Description : If I Mount My Compressor Sideways, Like On The Frame Rail Of My Truck, Is There Anything I Should Be Careful Of When Doing This?

Last Answer : you mount your compressor sideways to the frame rail, you should periodically check to make sure that your compressor is mounted securely. Use a thread-locking compound to keep the screws from backing off and causing the compressor to be mounted loosely.