Will My Small Homeowner Air Compressor Be Able To Handle An Extra Tank?

Will My Small Homeowner Air Compressor Be Able To Handle An Extra Tank?
by

1 Answer

Answer :

It depends on whether or not you have a continuous duty air compressor or not. A continuous duty compressor means that it is able to run for long periods of time (aka continuously). This type of compressor will not have any problems running a larger spare tank. If it is not continuous duty then it might have a tougher time. Depending on the size of your machine and the receiver tank, it should be able to handle it. Just be sure that you give it time to cool off when filling the tank, otherwise you would be going overboard.
by

Related questions

A reciprocating compressor is not suitable for use as a supercharger because: A. it runs at lower rpm B. the pressure ratio is high C. volumetric efficiency is high D. it is bulky and can handle small quantity of air

Description : A reciprocating compressor is not suitable for use as a supercharger because: A. it runs at lower rpm B. the pressure ratio is high C. volumetric efficiency is high D. it is bulky and can handle small quantity of air

Last Answer : ANSWER : D

Why the work per kg of air flow in axial flow compressor is less compared to centrifugal compressor for same pressure ratio ?

Description : Why the work per kg of air flow in axial flow compressor is less compared to centrifugal compressor for same pressure ratio ?

Last Answer : Isentropic efficiency of axial flow compressor is higher.

Which is an example of closed system? (A) Air compressor (B) Liquid cooling system of an automobile (C) Boiler (D) None of these

Description : Which is an example of closed system? (A) Air compressor (B) Liquid cooling system of an automobile (C) Boiler (D) None of these

Last Answer : (B) Liquid cooling system of an automobile

What Is A Rotary Air Compressor?

Description : What Is A Rotary Air Compressor?

Last Answer : A rotary-screw compressor is a type of gas compressor that uses a rotary-type positivedisplacement mechanism. They are commonly used to replace piston compressors where large volumes of high- ... either for large industrial applications or to operate high-power air tools such as jackhammers.

Why Doesn't My Air Compressor Produce As Much Air As It Used To?

Description : Why Doesn't My Air Compressor Produce As Much Air As It Used To?

Last Answer : The most common cause is bad valves. It is also important to check your entire system for higher air consumption or leaks.

Why Does My Compressor Leak Air When The Compressor Shuts Off?

Description : Why Does My Compressor Leak Air When The Compressor Shuts Off?

Last Answer : Most air compressors have a one way check valve between the compressor pump and the air receiver. When the compressor shuts off the check valve prevents the high pressure air from traveling back ... more common types are pressure switch mounted or centrifugal mounted on the end of the crankshaft.

How Much Air Will I Need To Power My Air Compressor Tool?

Description : How Much Air Will I Need To Power My Air Compressor Tool?

Last Answer : Generally, most air tools will take around 70-100 PSI, and will consume less than 10 CFM, however consult the manual or manufacturer of your tool for exact air requirements.

Thermo-compressor is commonly used for a) compressing hot air b) flash steam recovery c) distillation d) reverse compression of CO2

Description : Thermo-compressor is commonly used for a) compressing hot air b) flash steam recovery c) distillation d) reverse compression of CO2

Last Answer : flash steam recovery

Air preheater is not used as a waste heat recovery system in a____. a) Boiler b) billet Reheating Furnace c) Heat treatment furnace d) compressor

Description : Air preheater is not used as a waste heat recovery system in a____. a) Boiler b) billet Reheating Furnace c) Heat treatment furnace d) compressor

Last Answer : compressor

Rocker sprayer and Foot or pedal operated sprayer a. have small built tank b. have big built tank d. None of above

Description : Rocker sprayer and Foot or pedal operated sprayer a. have small built tank b. have big built tank d. None of above

Last Answer : Ans- c. does not have in built tank and separate spray tank is necessary.    

can your homeowner insurance carrier make reimbursment check for dwelling out to homeowner and bank

Description : can your homeowner insurance carrier make reimbursment check for dwelling out to homeowner and bank

Last Answer : Need Answer

Is is possible for a homeowner to remove black mold or should they hire a company that specializes in black mold removal?

Description : Is is possible for a homeowner to remove black mold or should they hire a company that specializes in black mold removal?

Last Answer : It is best to hire a company to take care of it for you. I also think that it has something to do with the home insurance plan coverage. Because of the toxicity of black mold, homeowners should hire a specialized company for its removal.

Who is responsible for pulling permits, the homeowner or the swimming pool contractor?

Description : Who is responsible for pulling permits, the homeowner or the swimming pool contractor?

Last Answer : The swimming pool contractor generally performs this function. However, the law holds the homeowner responsible for making sure it is done.

Why might a homeowner take out a second mortgage?

Description : Why might a homeowner take out a second mortgage?

Last Answer : A homeowner take out a second mortgage if they are struggling to pay off their first mortgage. You can read more at www.bostonapartments.com/mortgage/second-mortgage/second-mortgage.html -

Is there a good way for a homeowner to look for a gas leak or do I need a professional for natural gas leak detection?

Description : Is there a good way for a homeowner to look for a gas leak or do I need a professional for natural gas leak detection?

Last Answer : It is always go for a professional for natural gas leak detection. They have lot of equipments to detect the leak. Homeowners do not attempt to do these things as it might harm them.

Do homeowner insurance policies typically include flood coverage?

Description : Do homeowner insurance policies typically include flood coverage?

Last Answer : Flood coverage is not standard in most homeowner insurance policies. If flooding concerns you, then you should address this with your insurance company and have the coverage added.

Can you replace the razor blade that is in the razor knife that is included with the Evolv 10 pc. Homeowner Tool Set ?

Description : Can you replace the razor blade that is in the razor knife that is included with the Evolv 10 pc. Homeowner Tool Set ?

Last Answer : Yes the blade is easy to replace.

What size wheelbarrow would be good for the average homeowner?

Description : What size wheelbarrow would be good for the average homeowner?

Last Answer : A 5 cubic foot wheelbarrow will be a good size for the average homeowner.

caregiver for my father claims an injury while at my home. does homeowner insurance cover costs ?

Description : caregiver for my father claims an injury while at my home. does homeowner insurance cover costs ?

Last Answer : the answer will be in your policy declarations you need to look there most do though

Where can I find the basics of HUD's homeowner loan?

Description : Where can I find the basics of HUD's homeowner loan?

Last Answer : You can find the basic information on a HUD home owner loan by running a basic search on the HUD site, or you can contact an agent to get information as well.

Can septic system problems be fixed by the homeowner?

Description : Can septic system problems be fixed by the homeowner?

Last Answer : You need to call a reputable, licensed company that specializes in Septic tanks and Septic removal. The problem could be a damaged septic tank, or a damaged drainfield. Doing it yourself could become a health hazard.

How can a homeowner calculate the size of their roof?

Description : How can a homeowner calculate the size of their roof?

Last Answer : Use the square footage of your house, and the size of your roof should be about the same. Be carefull not to include the yard in the footage or anything that is not covered by the roof, then divide the number by the number of stories your house is.

Can black mold removal be done by the average homeowner?

Description : Can black mold removal be done by the average homeowner?

Last Answer : The average homeowner can remove black mold, however, I would recommend that a dust mask be worn so that you are not inhaling the mold spores. You will need a dehumidifier as well as bleach, cleaning supplies, gloves and a mask. http://www.onlinetips.org/black-mold/get-rid

A homeowner replaces a 65 watt incandescent bulb with a 15 watt compact fluorescent lamp. The light is on 2000 hours a year. If electricity cost 10 cents a kilowatt-hour, how much money is saved on the electric bill in one year? w) $50.00 x) $10.00 y) $5.00 z) $1.00

Description : A homeowner replaces a 65 watt incandescent bulb with a 15 watt compact fluorescent lamp. The light is on 2000 hours a year. If electricity cost 10 cents a kilowatt-hour, how much money is saved on the electric bill in one year? w) $50.00 x) $10.00 y) $5.00 z) $1.00 

Last Answer : ANSWER: X -- $10.00 

Two-value capacitor motor finds increased application as compressor motor in small home air-conditioners because?

Last Answer : Two-value capacitor motor finds increased application as compressor motor in small home air-conditioners because it has low starting as well as running currents at relatively high power factor.

The pressure gauge on a 2000 m³ tank of oxygen gas reads 600 kPa. How much volumes will the oxygen occupied at pressure of the outside air 100 kPa?  a) 14026.5 m³  b) 15026.5 m³  c) 13026.5 m³  d) 16026.5 m³ Formula: P1V1/T1 =P2V2/T2

Description : The pressure gauge on a 2000 m³ tank of oxygen gas reads 600 kPa. How much volumes will the oxygen occupied at pressure of the outside air 100 kPa?  a) 14026.5 m³  b) 15026.5 m³  c) 13026.5 m³  d) 16026.5 m³ Formula: P1V1/T1 =P2V2/T2

Last Answer : 14026.5 m³

How the net work to drive a compressor and its volumetric efficiency behave with increase in clearance volume ?

Description : How the net work to drive a compressor and its volumetric efficiency behave with increase in clearance volume ?

Last Answer : Work remains unaltered and volumetric efficiency decreases.

Why axial flow compressor is preferred for gas turbines for aeroplanes ?

Description : Why axial flow compressor is preferred for gas turbines for aeroplanes ?

Last Answer : Because it has low frontal area.

Why gas turbine power plant needs efficient compressor ?

Description : Why gas turbine power plant needs efficient compressor ?

Last Answer : Because a large portion of turbine work is eaten away by compressor and its inefficiency will affect net power output and cost of generation.

Under what condition the work done in reciprocating compressor will be least ?

Description : Under what condition the work done in reciprocating compressor will be least ?

Last Answer : It is least when compression process approaches isothermal. For this purpose, attempts are made to cool the air during compression.

What Is The Use Of Compressor In Refrigeration?

Description : What Is The Use Of Compressor In Refrigeration?

Last Answer : The compressor does exactly as its name says: it compresses the refrigerant. The compressor receives low pressure gas from the evaporator and converts it to high pressure gas. As mentioned earlier, as the gas is compressed, the temperature rises. The hot refrigerant gas then flows to the condenser.

What Is A Gas Compressor Used For?

Description : What Is A Gas Compressor Used For?

Last Answer : A gas compressor is a mechanical device that increases the pressure of a gas by reducing its volume. An air compressor is a specific type of gas compressor. Compressors are similar to pumps: both increase the pressure on a fluid and both can transport the fluid through a pipe.

How Does A Refrigerant Compressor Work?

Description : How Does A Refrigerant Compressor Work?

Last Answer :  The compressor constricts the refrigerant vapor, raising its pressure, and pushes it into the coils on the outside of the refrigerator.  When the hot gas in the coils meets the cooler air ... it becomes a liquid.  The refrigerant absorbs the heat inside the fridge, cooling down the air.

Why Is A Compressor Used In Refrigeration?

Description : Why Is A Compressor Used In Refrigeration?

Last Answer : The compressor does exactly as its name says: it compresses the refrigerant. The compressor receives low pressure gas from the evaporator and converts it to high pressure gas. As mentioned earlier, as the gas is compressed, the temperature rises. The hot refrigerant gas then flows to the condenser.

Why Compressor Shuts Down On High-temperature?

Description : Why Compressor Shuts Down On High-temperature?

Last Answer : If your compressor trips on over temeprature, it could be any of the following:  Ambient temperature too high or not enough ventilation.  Too low oil level.  Wrong type of oil.  Dirty oil cooler.  Thermostatic valve not working.  Dirt / obstruction in oil lines.

Why Does The Safety Valve On My Compressor Pump Make A "popping" Sound?

Description : Why Does The Safety Valve On My Compressor Pump Make A "popping" Sound?

Last Answer : This is most commonly an indication of bad valves. Depending on the model valves could be rebuilt or replaced.

What Is The Difference Between A Rotary Screw Compressor And A Reciprocating Compressors?

Description : What Is The Difference Between A Rotary Screw Compressor And A Reciprocating Compressors?

Last Answer : A rotary screw compressor is one that utilizes two intermeshing helical rotors to trap a volume of air, then compress it to a higher pressure. Rotary screw compressors can be run at lower ... piston compressor (aka reciprocating) uses pistons driven by a crankshaft to deliver air at high pressure.

How Often Until A New Compressor Is 'broken In'?

Description : How Often Until A New Compressor Is 'broken In'?

Last Answer : Air Compressors do not need to be broken in. Check for any leaks or malfunctions during the first start-up, but after that you should be ready to go.

What Is The Maximum Hose Length I Should Use With My Compressor?

Description : What Is The Maximum Hose Length I Should Use With My Compressor?

Last Answer : This will also depend on the size of compressor and CFM required. The Maximum hose length is one of the most open ended questions related to air compressors. For a small homeowner unit, it would ... , contact your local installation provider or give us a call to help figure out your maximum length.

What Happens When Water Stays In My Compressor?

Description : What Happens When Water Stays In My Compressor?

Last Answer : Compressor tanks are made of steel, which means if water is left in the tank, rust will start to accrue. Depending on the severity, contact your local service center about the best way to eliminate ... One place to start would be to look into purchasing an air dryer, to help eliminate the problem.

Will My Compressor Run On A Generator?

Description : Will My Compressor Run On A Generator?

Last Answer : The compressor should be able to run given the proper requirements, however we recommend not using a compressor with a generator. Generators have fluctuations in power, and because a compressor needs constant voltage ... to run, it is generally best not to use a generator if no power is available.

Is Amp Draw Of The Compressor Something I Need To Be Concerned With?

Description : Is Amp Draw Of The Compressor Something I Need To Be Concerned With?

Last Answer : Yes, the lower the amp draw, the better the compressor is. As a rule of thumb, the maximum amperage that a compressor should require is 30amps.

Is It Possible To Use An Adjustable Pressure Switch With My Compressor?

Description : Is It Possible To Use An Adjustable Pressure Switch With My Compressor?

Last Answer : May not use adjustable pressure switches with any VIAIR compressor. If you use an adjustable pressure switch, you can set the pressure switch higher than the maximum pressure that is rated for your ... supply tank. Doing so will immediately void your warranty, not to mention, it is dangerous.

Is It Possible To Hook Up More Than One Compressor To A Single Pressure Switch?

Description : Is It Possible To Hook Up More Than One Compressor To A Single Pressure Switch?

Last Answer : Yes, it is possible to use one pressure switch on more than one compressor. You should always run a relay if you want to hook up multiple compressors to a single switch. You should check the amp draw on the switch first, and then you’ll know how many compressors you can hook up to one switch.

If I Mount My Compressor Sideways, Like On The Frame Rail Of My Truck, Is There Anything I Should Be Careful Of When Doing This?

Description : If I Mount My Compressor Sideways, Like On The Frame Rail Of My Truck, Is There Anything I Should Be Careful Of When Doing This?

Last Answer : you mount your compressor sideways to the frame rail, you should periodically check to make sure that your compressor is mounted securely. Use a thread-locking compound to keep the screws from backing off and causing the compressor to be mounted loosely.

Is It Possible To Mount The Compressor Sideways? Must It Be Mounted With The Cylinder Upright?

Description : Is It Possible To Mount The Compressor Sideways? Must It Be Mounted With The Cylinder Upright?

Last Answer : Yes, you can mount our compressors in any direction or position because they are oil-less. The only position we do not recommend is an upside-down mount, since heat tends to travel upward.

Is The 550c Compressor Sealed And Weatherproof?

Description : Is The 550c Compressor Sealed And Weatherproof?

Last Answer : The 550C is not a sealed unit. If you want to mount a compressor under your truck, you might want to take a look at our 450 series. While it is not as fast as the 550 series, it is moisture ... your truck. Also, we have new compressors that are more suited to exterior mounting (420, 460C, and 480C).

Why Is It Important To Have A Sealed And Moisture-resistant Compressor?

Description : Why Is It Important To Have A Sealed And Moisture-resistant Compressor?

Last Answer : The preference of a sealed-type compressor is due to the fact that in mobile pneumatics, compressors are likely to be exposed to outside elements.

How Can I Tell Whether The Compressor Is Sealed Or Non-sealed?

Description : How Can I Tell Whether The Compressor Is Sealed Or Non-sealed?

Last Answer : Manufacturers will normally specify if a compressor is sealed against moisture and dust, and in many cases, you can tell the difference by simply inspecting the compressor. If you see vents, cracks, or ... motor housing, then the compressor is not sealed and must be kept away from dust and moisture.

Does A New Compressor Have To Be Broken In?

Description : Does A New Compressor Have To Be Broken In?

Last Answer : No, they do not. Typically after an install, you should power up the system from 0 to whatever the cut-off pressure is and check for any leaks that may be present.