A pre-stressed concrete pile is (A) Easy to handle (B) Lighter in weight (C) Extremely durable (D) All the above

A pre-stressed concrete pile is
(A) Easy to handle
(B) Lighter in weight
(C) Extremely durable
(D) All the above
by

1 Answer

Answer :

Answer: Option D
by

Related questions

A pre-stressed concrete member (A) Is made of concrete (B) Is made of reinforced concrete (C) Is stressed after casting (D) Possesses internal stresses

Description : A pre-stressed concrete member (A) Is made of concrete (B) Is made of reinforced concrete (C) Is stressed after casting (D) Possesses internal stresses

Last Answer : Answer: Option D

The minimum cube strength of concrete used for a pre-stressed member, is (A) 50 kg/cm2 (B) 150 kg/cm2 (C) 250 kg/cm2 (D) 350 kg/cm

Description : The minimum cube strength of concrete used for a pre-stressed member, is (A) 50 kg/cm2 (B) 150 kg/cm2 (C) 250 kg/cm2 (D) 350 kg/cm

Last Answer : Answer: Option D

Pick up the assumption for the design of a pre-stressed concrete member from the following: (A) A transverse plane section remains a plane after bending (B) During deformation limits, Hook's law is equally applicable to concrete as well as to steel (C) Variation of stress in reinforcement due to changes in external loading is negligible (D) All the above

Description : Pick up the assumption for the design of a pre-stressed concrete member from the following: (A) A transverse plane section remains a plane after bending (B) During deformation limits, Hook's ... of stress in reinforcement due to changes in external loading is negligible (D) All the above

Last Answer : Answer: Option D

If is the sectional area of a pre-stressed rectangular beam provided with a tendon pre-stressed by a force through its centroidal longitudinal axis, the compressive stress in concrete, is (A) P/A (B) A/P (C) P/2A (D) 2A/P

Description : If is the sectional area of a pre-stressed rectangular beam provided with a tendon pre-stressed by a force through its centroidal longitudinal axis, the compressive stress in concrete, is (A) P/A (B) A/P (C) P/2A (D) 2A/P

Last Answer : Answer: Option A

High strength concrete is used in pre-stressed member (A) To overcome high bearing stresses developed at the ends (B) To overcome bursting stresses at the ends (C) To provide high bond stresses (D) All the above

Description : High strength concrete is used in pre-stressed member (A) To overcome high bearing stresses developed at the ends (B) To overcome bursting stresses at the ends (C) To provide high bond stresses (D) All the above

Last Answer : Answer: Option D

In a pre-stressed member it is advisable to use (A) Low strength concrete only (B) High strength concrete only (C) Low strength concrete but high tensile steel (D) High strength concrete and high tensile

Description : In a pre-stressed member it is advisable to use (A) Low strength concrete only (B) High strength concrete only (C) Low strength concrete but high tensile steel (D) High strength concrete and high tensile

Last Answer : Answer: Option D

A pre-stressed concrete member is preferred because (A) Its dimensions are not decided from the diagonal tensile stress (B) Large size of long beams carrying large shear force need not be adopted (C) Removal of cracks in the members due to shrinkage (D) All the above

Description : A pre-stressed concrete member is preferred because (A) Its dimensions are not decided from the diagonal tensile stress (B) Large size of long beams carrying large shear force need not be adopted (C) Removal of cracks in the members due to shrinkage (D) All the above

Last Answer : Answer: Option D

In pre-stressed concrete (A) Forces of tension and compression change but lever arm remains unchanged (B) Forces of tension and compressions remain unchanged but lever arm changes with the moment (C) Both forces of tension and compression as well as lever arm change (D) Both forces of tension and compression as well as lever arm remain unchanged

Description : In pre-stressed concrete (A) Forces of tension and compression change but lever arm remains unchanged (B) Forces of tension and compressions remain unchanged but lever arm changes with the moment ( ... arm change (D) Both forces of tension and compression as well as lever arm remain unchanged

Last Answer : Answer: Option B

The purpose of reinforcement in pre-stressed concrete is (A) To provide adequate bond stress (B) To resist tensile stresses (C) To impart initial compressive stress in concrete (D) All of the above

Description : The purpose of reinforcement in pre-stressed concrete is (A) To provide adequate bond stress (B) To resist tensile stresses (C) To impart initial compressive stress in concrete (D) All of the above

Last Answer : Answer: Option C

Suggest the minimum grade of concrete for following exposure condition. i) RCC work ii) Water retaining structure iii) Sea water construction iv) Pre-stressed concrete

Description : Suggest the minimum grade of concrete for following exposure condition. i) RCC work ii) Water retaining structure iii) Sea water construction iv) Pre-stressed concrete

Last Answer : Minimum grade of concrete for following exposure condition: i) RCC work = M 20 ii) Water retaining structure = M 25 iii) Sea water construction = M 20 for PCC and M 30 for RCC iv) Pre-stressed concrete = M 30

Pick up the correct statement from the following: (A) Copper pipes are highly resistant to acidic and alkaline water (B) Wrought iron pipes are lighter than cast iron pipes (C) Wrought iron pipes corrode quickly and are less durable (D) All the above

Description : Pick up the correct statement from the following:  (A) Copper pipes are highly resistant to acidic and alkaline water  (B) Wrought iron pipes are lighter than cast iron pipes  (C) Wrought iron pipes corrode quickly and are less durable  (D) All the above

Last Answer : (D) All the above

A pre-cast pile generally used, is (A) Circular (B) Square (C) Octagonal (D) Square with corners chamfered

Description : A pre-cast pile generally used, is (A) Circular (B) Square (C) Octagonal (D) Square with corners chamfered

Last Answer : Answer: Option D

If a rectangular pre-stressed beam of an effective span of 5 meters and carrying a total load 3840 kg/m, is designed by the load balancing method, the central dip of the parabolic tendon should be (A) 5 cm (B) 10 cm (C) 15 cm (D) 20 cm

Description : If a rectangular pre-stressed beam of an effective span of 5 meters and carrying a total load 3840 kg/m, is designed by the load balancing method, the central dip of the parabolic tendon should be (A) 5 cm (B) 10 cm (C) 15 cm (D) 20 cm

Last Answer : Answer: Option B

is the pre-stressed force applied to the tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The maximum stress in the beam, subjected to a maximum bending moment , is (A) f = (P/A) + (Z/M) (B) f = (A/P) + (M/Z) (C) f = (P/A) + (M/Z) (D) f = (P/A) + (M/6Z)

Description : is the pre-stressed force applied to the tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The maximum stress in the beam, subjected to a maximum bending moment , is (A) f = (P/A) + (Z/M) ... ) + (M/Z) (C) f = (P/A) + (M/Z) (D) f = (P/A) + (M/6Z)

Last Answer : Answer: Option C

If the maximum dip of a parabolic tendon carrying tension P is h and the effective length of the pre-stressed beam is L, the upward uniform pressure will be (A) 8hp/l (B) 8hp/l² (C) 8hl/p (D) 8hl/p²

Description : If the maximum dip of a parabolic tendon carrying tension P is h and the effective length of the pre-stressed beam is L, the upward uniform pressure will be (A) 8hp/l (B) 8hp/l² (C) 8hl/p (D) 8hl/p²

Last Answer : Answer: Option B

If the loading on a pre-stressed rectangular beam, is uniformly distributed, the tendon to be provided should be. (A) Straight below centroidal axis (B) Parabolic with convexity downward (C) Parabolic with convexity upward (D) Straight above centroidal axis

Description : If the loading on a pre-stressed rectangular beam, is uniformly distributed, the tendon to be provided should be. (A) Straight below centroidal axis (B) Parabolic with convexity downward (C) Parabolic with convexity upward (D) Straight above centroidal axis

Last Answer : Answer: Option B

A pre-stressed rectangular beam which carries two concentrated loads W at L/3 from either end, is provided with a bent tendon with tension P such that central one-third portion of the tendon remains parallel to the longitudinal axis, the maximum dip h is (A) WL/P (B) WL/2P (C) WL/3P (D) WL/4P

Description : A pre-stressed rectangular beam which carries two concentrated loads W at L/3 from either end, is provided with a bent tendon with tension P such that central one-third portion of the tendon remains parallel to the longitudinal axis, the maximum dip h is (A) WL/P (B) WL/2P (C) WL/3P (D) WL/4P

Last Answer : Answer: Option C

is the pre-stressed force applied to tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The minimum stress on the beam subjected to a maximum bending moment is (A) f = (P/A) - (Z/M) (B) f = (A/P) - (M/Z) (C) f = (P/A) - (M/Z) (D) f = (P/A) - (M/6Z)

Description : is the pre-stressed force applied to tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The minimum stress on the beam subjected to a maximum bending moment is (A) f = (P/A) - (Z/M) (B) f = (A/P) - (M/Z) (C) f = (P/A) - (M/Z) (D) f = (P/A) - (M/6Z)

Last Answer : Answer: Option C

The advantage of a concrete pile over a timber pile, is (A) No decay due to termites (B) No restriction on length (C) Higher bearing capacity (D) All the above

Description : The advantage of a concrete pile over a timber pile, is (A) No decay due to termites (B) No restriction on length (C) Higher bearing capacity (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) A pile is a slender member which transfers the load through its lower end on a strong strata (B) A pile is a slender member which transfers its load to the surrounding soil (C) A pile is a slender member which transfers its load by friction (D) A pile is a cylindrical body of concrete which transfers the load at a depth greater than its width

Description : Pick up the correct statement from the following: (A) A pile is a slender member which transfers the load through its lower end on a strong strata (B) A pile is a slender member which ... A pile is a cylindrical body of concrete which transfers the load at a depth greater than its width

Last Answer : Answer: Option B

In places where the soil is soft and has small resistance to the flow of concrete, which one of the following types of piles, is used (A) Vibro pile (B) Pressure pile (C) Franki pile (D) Pedestal pile

Description : In places where the soil is soft and has small resistance to the flow of concrete, which one of the following types of piles, is used (A) Vibro pile (B) Pressure pile (C) Franki pile (D) Pedestal pile

Last Answer : Answer: Option A

The compaction of concrete in the drilled pile hole is done by compressed air in the case of (A) Simplex pile (B) Franki pile (C) Pressure pile (D) Vibro pile

Description : The compaction of concrete in the drilled pile hole is done by compressed air in the case of (A) Simplex pile (B) Franki pile (C) Pressure pile (D) Vibro pile

Last Answer : Answer: Option C

The taper of precast concrete pile should not be more than (A) 1 cm per metre length (B) 2 cm per metre length (C) 4 cm per metre length (D) 5 cm per metre length

Description : The taper of precast concrete pile should not be more than (A) 1 cm per metre length (B) 2 cm per metre length (C) 4 cm per metre length (D) 5 cm per metre length

Last Answer : Answer: Option B

Best type of piles for soft soil having little resistance to the flow of concrete, is (A) Simplex pile (B) Vibro pile (C) Raymond pile (D) Franki pile

Description : Best type of piles for soft soil having little resistance to the flow of concrete, is (A) Simplex pile (B) Vibro pile (C) Raymond pile (D) Franki pile

Last Answer : Answer: Option B

The pile which is provided with a bulb filled with concrete at its lower end, is known as (A) Simplex pile (B) Mac-Arthur pile (C) Raymond pile (D) Franki pile

Description : The pile which is provided with a bulb filled with concrete at its lower end, is known as (A) Simplex pile (B) Mac-Arthur pile (C) Raymond pile (D) Franki pile

Last Answer : Answer: Option B

Pick up the incorrect statement from the following: (A) The width of the wall is constructed thicker at the base in a stepped fashion (B) A long vertical load transferring concrete structure is called a concrete pile (C) In pile which transfers the load to the soil by the friction between the pile and the surrounding soil is called friction pile (D) The pile which transfers the load to a hard rock bed at certain depth is called load bearing

Description : Pick up the incorrect statement from the following: (A) The width of the wall is constructed thicker at the base in a stepped fashion (B) A long vertical load transferring concrete structure is ... ) The pile which transfers the load to a hard rock bed at certain depth is called load bearing

Last Answer : Answer: Option D

In an over-reinforced section (a) Steel reinforcement is not fully stressed to its permissible value (b) Concrete is not fully stressed to its permissible value (c) Either (a) and (b) (d) Both (a) and (b)

Description : In an over-reinforced section (a) Steel reinforcement is not fully stressed to its permissible value (b) Concrete is not fully stressed to its permissible value (c) Either (a) and (b) (d) Both (a) and (b)

Last Answer : (a) Steel reinforcement is not fully stressed to its permissible value

The section in which concrete is not fully stressed to its permissible value when stress in steel reaches its maximum value is (a) Under-reinforced section (b) Over-reinforced section (c) Critical section (d) Balanced section

Description : The section in which concrete is not fully stressed to its permissible value when stress in steel reaches its maximum value is (a) Under-reinforced section (b) Over-reinforced section (c) Critical section (d) Balanced section

Last Answer : (a) Under-reinforced section

Under normal loading conditions, the tensile stressed setup in the concrete will be _________the permissible stress. (a) More than (b) Less than (c) Equal to (d) All the above

Description : Under normal loading conditions, the tensile stressed setup in the concrete will be _________the permissible stress. (a) More than (b) Less than (c) Equal to (d) All the above

Last Answer : (a) More than

What would taking AdderAll or Concerta do to someone who is extremely stressed and who has a lot of things on their mind?

Description : What would taking AdderAll or Concerta do to someone who is extremely stressed and who has a lot of things on their mind?

Last Answer : Most definitely. Those drugs, bluntly, are speed. They will increase your amount of stress exponentially. (I know because I have been in this state of mind and under the influence of these substance ... under stress feels like taking something to help them, it should be a sedative, not a stimulant.

For a good concrete (A) Aggregates should be hard and durable (B) Water should be free from organic materials (C) Cement should be sufficient to produce the required strength (D) All the above

Description : For a good concrete (A) Aggregates should be hard and durable (B) Water should be free from organic materials (C) Cement should be sufficient to produce the required strength (D) All the above

Last Answer : Answer: Option D

Accordingly to IS: 383-1970, a good aggregate for concrete construction should be (a) Chemically inert (b) Sufficiently strong (c)Sufficiently hard and durable (d) All the above

Description : Accordingly to IS: 383-1970, a good aggregate for concrete construction should be (a) Chemically inert (b) Sufficiently strong (c)Sufficiently hard and durable (d) All the above

Last Answer : (d) All the above

Due to Bleeding action concrete becomes [ A ] Weak [ B ] Strong [ C ] Hard [ D ] Durable

Description : Due to Bleeding action concrete becomes [ A ] Weak [ B ] Strong [ C ] Hard [ D ] Durable

Last Answer : [ A ] Weak

Wp and Wf are the weights of a cylinder containing partially compacted and fully compacted concrete. If the compaction factor (Wp/Wf ) is 0.95, the workability of concrete is (A) Extremely low (B) Very low (C) Low (D) High

Description : Wp and Wf are the weights of a cylinder containing partially compacted and fully compacted concrete. If the compaction factor (Wp/Wf ) is 0.95, the workability of concrete is (A) Extremely low (B) Very low (C) Low (D) High

Last Answer : Option D

List the various types of losses of prestress in pretensioned pre-stressed member.

Description : List the various types of losses of prestress in pretensioned pre-stressed member.

Last Answer : i. Elastic shortening ii. Shrinkage of concrete iii. Creep of concrete iv. Relaxation of steel

Could it possibly be as easy to earn a pile of money as this commercial suggests?

Description : Could it possibly be as easy to earn a pile of money as this commercial suggests?

Last Answer : answer:It sounds like a scam, so I checked out the Better Business Bureau's (BBB) web site, and Surveys4Checks rates an F'. According to the site, the reasoning is: -Based on BBB files, ... . While the above doesn't rule out their legitimacy, it would give me enough reason to not participate.

After pre-stressing process is completed, a loss of stress is due to (A) Shrinkage of concrete (B) Elastic shortening of concrete (C) Creep of concrete (D) All the above

Description : After pre-stressing process is completed, a loss of stress is due to (A) Shrinkage of concrete (B) Elastic shortening of concrete (C) Creep of concrete (D) All the above

Last Answer : Answer: Option D

If C is creep coefficient, f is original pre-stress in concrete, m is modular ratio, E is Young's modulus of steel and e is shrinkage strain, the combined effect of creep and shrinkage is: (A) (1 - C)mf - eEB) (C - 1)mf + eE(C) (C - 1)mf - eE(D) (1 - C)mf + eE

Description : If C is creep coefficient, f is original pre-stress in concrete, m is modular ratio, E is Young's modulus of steel and e is shrinkage strain, the combined effect of creep and shrinkage is: (A) (1 - C)mf - eE B) (C - 1)mf + eE (C) (C - 1)mf - eE (D) (1 - C)mf + eE

Last Answer : Answer: Option B

Cube strength of controlled concrete to be used for pre-tensioned and post-tensioned work respectively should not be less than (A) 35 MPa and 42 MPa (B) 42 MPa and 35 MPa (C) 42 MPa and 53 MPa (D) 53 MPa and 42 MPa

Description : Cube strength of controlled concrete to be used for pre-tensioned and post-tensioned work respectively should not be less than (A) 35 MPa and 42 MPa (B) 42 MPa and 35 MPa (C) 42 MPa and 53 MPa (D) 53 MPa and 42 MPa

Last Answer : Answer: Option B

Which of the following losses of pre-stress occurs only in pre-tensioning and not in posttensioning? (A) Elastic shortening of concrete (B) Shrinkage of concrete (C) Creep of concrete (D) Loss due to frictio

Description : Which of the following losses of pre-stress occurs only in pre-tensioning and not in posttensioning? (A) Elastic shortening of concrete (B) Shrinkage of concrete (C) Creep of concrete (D) Loss due to friction

Last Answer : Answer: Option A

The ‘transmission length’ requirement is to be satisfied in the design of (a) Pre-tensioned concrete beams (b) Post-tensioned concrete beam (c) Unbonded post-tensioned concrete (d) Post-tensioned continuous concrete beams

Description : The ‘transmission length’ requirement is to be satisfied in the design of (a) Pre-tensioned concrete beams (b) Post-tensioned concrete beam (c) Unbonded post-tensioned concrete (d) Post-tensioned continuous concrete beams

Last Answer : (a) Pre-tensioned concrete beams

How do you politely handle an extremely assertive vendor?

Description : How do you politely handle an extremely assertive vendor?

Last Answer : Send them an e-mail that says exactly what you put in your question. It sounds reasonable, encouraging about the possible future business between your companies, but firm about your expectation of respect and cooperation.

A gas thermometer is more sensitive than a liquid thermometer because a gas: (1) is lighter than liquid (2) expands more than a liquid (3) is easy to obtain (4) does not change state easily

Description : A gas thermometer is more sensitive than a liquid thermometer because a gas: (1) is lighter than liquid (2) expands more than a liquid (3) is easy to obtain (4) does not change state easily

Last Answer : (4) does not change state easily Explanation: Gas is easily compressed so it would have a more versatile range of measurement at least in our atmospheric conditions. Liquid is not so ... apparatus is a constant volume thermometer. Gas thermometers are often used to calibrate other thermometers.

A gas thermometer is more sensitive than a liquid thermometer because a gas : (1) is lighter than liquid (2) expands more than a liquid (3) is easy to obtain (4) does not change state easily

Description : A gas thermometer is more sensitive than a liquid thermometer because a gas : (1) is lighter than liquid (2) expands more than a liquid (3) is easy to obtain (4) does not change state easily

Last Answer : does not change state easily

Wanted to know which brand of upholstery is durable , soil resistant and easy to maintain?

Description : Wanted to know which brand of upholstery is durable , soil resistant and easy to maintain?

Last Answer : Any fabric that’s made by Dupont. check out their website. its expensive, but worth it in the long run.

In theory if one understands PhotoShop5 it will be extremely easy to pick up the gist of LightRoom?

Description : In theory if one understands PhotoShop5 it will be extremely easy to pick up the gist of LightRoom?

Last Answer : answer:If you understand the basics of photo-correction, color balancing, etc. as learned through Photoshop, then yes – it is easy to pick up Lightroom (or even Apple’s Aperture). “Super” easy would depend on how quick a study you are.

What are some extremely easy things you make from scratch?

Description : What are some extremely easy things you make from scratch?

Last Answer : Food! Spaghetti sauce, fried rice, pizza, even hamburgers…I cringe when I see anyone open a can, a jar or a pre-prepared frozen meal in a box and zap it. Everybody STOP THAT!!! Cook real food!!!

Most important advantage of an IC is its A) Easy replacement in case of circuit failure B) Extremely high reliability C) Reduced cost D) Lower power consumption

Description : Most important advantage of an IC is its A) Easy replacement in case of circuit failure B) Extremely high reliability C) Reduced cost D) Lower power consumption

Last Answer : Answer : B

Most important advantage of an IC is its a. Easy replacement in case of circuit failure b. Extremely high reliability c. Reduced cost d. Lower power consumption

Description : Most important advantage of an IC is its a. Easy replacement in case of circuit failure b. Extremely high reliability c. Reduced cost d. Lower power consumption

Last Answer : Extremely high reliability