List the various types of losses of prestress in pretensioned pre-stressed member.

List the various types of losses of prestress in pretensioned pre-stressed member.
by

1 Answer

Answer :

i. Elastic shortening

ii. Shrinkage of concrete

iii. Creep of concrete

iv. Relaxation of steel


by

Related questions

Explain the loss of prestress due to friction and slip of anchorage and state two remedial measures to avoid them.

Description : Explain the loss of prestress due to friction and slip of anchorage and state two remedial measures to avoid them.

Last Answer : Loss due to Friction: This loss occurs only in post-tensioned members. There always exists a certain amount of friction in the jacking and anchoring system and on the walls of the duct. So, ... over-extending the tendon in the prestressing operation by the amount of the draw - in before anchoring

Depict the effect of pre-fabricated building on the surrounding environment with respect to noise pollution, staking at elements and transportation.

Description : Depict the effect of pre-fabricated building on the surrounding environment with respect to noise pollution, staking at elements and transportation. 

Last Answer : Noise pollution is the serious or more noise that may damage the activity or human life. The contribution of most outside noise is mainly due to building activities. Noise pollution affects both health and ... iv) Sleep interference v) Habit of talking loudly vi) Hearing loss vii) Concentration

Define Prestressed concrete and state types of prestressing steel.

Description : Define Prestressed concrete and state types of prestressing steel.

Last Answer : Prestressed concrete: Prestressed concrete is basically a concrete in which internal stresses of a suitable magnitude and distribution are deliberately introduced so that the stresses resulting from external loads are ... 1962, and. 4) Uncoated stress relieved strand conforming to IS: 6006-1970. 

For what type of structures do you recommend post-tensioning?

Description : For what type of structures do you recommend post-tensioning?

Last Answer : 1) High rise buildings. In long span slab where beam is not provided & the slab of assembly hall, cinema theaters etc. like structure where the distance between columns are more, then post ... Post Tensioning is used extensively for slabs on grade where soils are likely to move (expansive soils)

Explain freyssinet system of prestressing with respect to process and application with sketches.

Description : Explain freyssinet system of prestressing with respect to process and application with sketches.

Last Answer : Process: - 1. The freyssinet system was the first to be introduced among the post - tensioned system high tensile steel wires 5mm to 8mm diameter about 12 in number are arranged to form a group into a cable ... gas (LNG) storage tank 4. Off share platforms. 5. Wind turbine towers etc.

Illustrate cable profiles for eccentric straight and parabolic cables with sketches.

Description : Illustrate cable profiles for eccentric straight and parabolic cables with sketches. 

Last Answer : i) Eccentric straight cable profile: The stress due to prestressing alone are generally combined stresses due to the action of direct load bending from an eccentrically applied load. In this case, the load is ... section as shown in the figure below. ii) Parabolic cable profile

State the advantages and disadvantages of prestressed concrete.

Description : State the advantages and disadvantages of prestressed concrete.

Last Answer : Advantages: 1. The c/s ismore efficiently used in fully prestressed members. 2. Dead loads are reduced considerably. 3. Improved shear resistance, due to the effect of compressive prestress, ... cube strength of 35 N/mm2 for Posttensioned system and 45 N/ mm2 for pretensioned system.

Justify the necessity of use of high-grade materials in prestressed concrete.

Description : Justify the necessity of use of high-grade materials in prestressed concrete.

Last Answer : 1) If mild steel is used, the working stress in it (i.e. 140 N/mm2) is more or less completely lost due to elastic deformation, creep and shrinkage of concrete. 2) The ... structural elements. With reduced dead weight of the material, larger spans become technically and economical practicable. 

Explain any one method of Prefab system.

Description : Explain any one method of Prefab system.

Last Answer : Prefab system: It refers to any part of a building that has been fabricated at a place other than its final location. For this reason, it can be referred to by other names such as off-site fabrication, ... If you need further assessing, feel free to contact us; your needs are all that matter to us.

Explain the procedure of the storage, transportation and erection of prefabricated building elements.

Description : Explain the procedure of the storage, transportation and erection of prefabricated building elements. 

Last Answer : Storage of pre-fabricated building elements: 1) Procurement storage of Unloading raw materials 2) Testing of raw materials 3) Design of concrete mix 4) Fabrication of reinforcement cages 5) ... differs with risk condition, hence skilled foremen, and workers to be employed on the job.

Explain determination of Water absorption of paver block and state acceptable limits as per IS.

Description : Explain determination of Water absorption of paver block and state acceptable limits as per IS. 

Last Answer : Step 1. Saturation  The test specimen shall be completely immersed in water at room temperature for 24 * 2 h. The specimen then shall be removed from the water and allowed to drain for 1 min by ... more than 6 % by mass and in individual samples, the water absorption should be restricted to 7 %

Describe with sketch any two joints in doors and window frame.

Description : Describe with sketch any two joints in doors and window frame.

Last Answer : 1. Connections must be adequate structurally. 2. Means of connections between adjacent must allow safe and speedy erection regardless of minor inherent inaccuracies in precast elements and in-situ concrete. 3. ... height) of the frames shall confirm to the requirements of IS : 4021-1976

Describe any two design considerations for Precast Canal lining.

Description : Describe any two design considerations for Precast Canal lining.

Last Answer : 1. Precast concrete slabs, laid properly on carefully prepared sub-grades and with the joints, effectively sealed, constitute a serviceable type of lining. The precast slabs are about 5 to ... . However, seepage losses are obviously more. Transportation of precast slabs may contribute to breakage. 

State any four advantages and four disadvantages of precast concrete.

Description : State any four advantages and four disadvantages of precast concrete.

Last Answer : Advantages: 1. Very rapid speed of erection 2. Good quality control 3. Entire building can be precast-walls, floors, beams, etc. 4. Rapid construction on site 5. High quality because of ... is required in the application of the panel on site. 11. Cranes are required to lift panels.

State cable profile in simply supported rectangular beam section.

Description : State cable profile in simply supported rectangular beam section.

Last Answer : Cabe profile: In a prestressed concrete member, external type of loads is balanced by transverse component of suitable cable profile, on effect of loading the net deformation increases the stress, strain and length of the tendon, extension of tendon, increase in strain, increase in stress.

What is the basic principle of Prestressed concrete?

Description : What is the basic principle of Prestressed concrete?

Last Answer : Principle: The compressive stresses induced by high strength steel tendons in a concrete member before the application of load, will balance the tensile stresses imposed in the member during its service.

Define Modules and modular co-ordination

Description : Define Modules and modular co-ordination

Last Answer : Modules: Modules are a standard unit of size used to coordinate the dimensions of buildings and components. They are of two types: 1. Multi modules 2. Basic modules  Modular Co-ordination: The modular ... for basic module is M 1M = 100mm 100 mm = 1M = It is international standard value.

State any four precast non-structural components that can be used for speedy construction.

Description : State any four precast non-structural components that can be used for speedy construction.

Last Answer : 1. Architectural Precast 2. Insulated Architectural Cladding 3. Insulated Wall Panels 4. Column Covers 5. Precast Concrete Light Wall 6. Precast Concrete Spandrels 7. Precast Concrete Solid Walls 8. Stormwater Deflector 9. Façade 10. Concrete panels for partition walls 11. Concrete planks

State any two names of materials used in precast concrete

Description : State any two names of materials used in precast concrete

Last Answer : 1. Cement 2. Sand 3. Steel 4. Water 5. Polystyrene 6. Fly ash. 7. Ground granulated blast furnace slag

A pre-stressed concrete member (A) Is made of concrete (B) Is made of reinforced concrete (C) Is stressed after casting (D) Possesses internal stresses

Description : A pre-stressed concrete member (A) Is made of concrete (B) Is made of reinforced concrete (C) Is stressed after casting (D) Possesses internal stresses

Last Answer : Answer: Option D

The minimum cube strength of concrete used for a pre-stressed member, is (A) 50 kg/cm2 (B) 150 kg/cm2 (C) 250 kg/cm2 (D) 350 kg/cm

Description : The minimum cube strength of concrete used for a pre-stressed member, is (A) 50 kg/cm2 (B) 150 kg/cm2 (C) 250 kg/cm2 (D) 350 kg/cm

Last Answer : Answer: Option D

Pick up the assumption for the design of a pre-stressed concrete member from the following: (A) A transverse plane section remains a plane after bending (B) During deformation limits, Hook's law is equally applicable to concrete as well as to steel (C) Variation of stress in reinforcement due to changes in external loading is negligible (D) All the above

Description : Pick up the assumption for the design of a pre-stressed concrete member from the following: (A) A transverse plane section remains a plane after bending (B) During deformation limits, Hook's ... of stress in reinforcement due to changes in external loading is negligible (D) All the above

Last Answer : Answer: Option D

High strength concrete is used in pre-stressed member (A) To overcome high bearing stresses developed at the ends (B) To overcome bursting stresses at the ends (C) To provide high bond stresses (D) All the above

Description : High strength concrete is used in pre-stressed member (A) To overcome high bearing stresses developed at the ends (B) To overcome bursting stresses at the ends (C) To provide high bond stresses (D) All the above

Last Answer : Answer: Option D

In a pre-stressed member it is advisable to use (A) Low strength concrete only (B) High strength concrete only (C) Low strength concrete but high tensile steel (D) High strength concrete and high tensile

Description : In a pre-stressed member it is advisable to use (A) Low strength concrete only (B) High strength concrete only (C) Low strength concrete but high tensile steel (D) High strength concrete and high tensile

Last Answer : Answer: Option D

A pre-stressed concrete member is preferred because (A) Its dimensions are not decided from the diagonal tensile stress (B) Large size of long beams carrying large shear force need not be adopted (C) Removal of cracks in the members due to shrinkage (D) All the above

Description : A pre-stressed concrete member is preferred because (A) Its dimensions are not decided from the diagonal tensile stress (B) Large size of long beams carrying large shear force need not be adopted (C) Removal of cracks in the members due to shrinkage (D) All the above

Last Answer : Answer: Option D

If a rectangular pre-stressed beam of an effective span of 5 meters and carrying a total load 3840 kg/m, is designed by the load balancing method, the central dip of the parabolic tendon should be (A) 5 cm (B) 10 cm (C) 15 cm (D) 20 cm

Description : If a rectangular pre-stressed beam of an effective span of 5 meters and carrying a total load 3840 kg/m, is designed by the load balancing method, the central dip of the parabolic tendon should be (A) 5 cm (B) 10 cm (C) 15 cm (D) 20 cm

Last Answer : Answer: Option B

is the pre-stressed force applied to the tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The maximum stress in the beam, subjected to a maximum bending moment , is (A) f = (P/A) + (Z/M) (B) f = (A/P) + (M/Z) (C) f = (P/A) + (M/Z) (D) f = (P/A) + (M/6Z)

Description : is the pre-stressed force applied to the tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The maximum stress in the beam, subjected to a maximum bending moment , is (A) f = (P/A) + (Z/M) ... ) + (M/Z) (C) f = (P/A) + (M/Z) (D) f = (P/A) + (M/6Z)

Last Answer : Answer: Option C

If the maximum dip of a parabolic tendon carrying tension P is h and the effective length of the pre-stressed beam is L, the upward uniform pressure will be (A) 8hp/l (B) 8hp/l² (C) 8hl/p (D) 8hl/p²

Description : If the maximum dip of a parabolic tendon carrying tension P is h and the effective length of the pre-stressed beam is L, the upward uniform pressure will be (A) 8hp/l (B) 8hp/l² (C) 8hl/p (D) 8hl/p²

Last Answer : Answer: Option B

If the loading on a pre-stressed rectangular beam, is uniformly distributed, the tendon to be provided should be. (A) Straight below centroidal axis (B) Parabolic with convexity downward (C) Parabolic with convexity upward (D) Straight above centroidal axis

Description : If the loading on a pre-stressed rectangular beam, is uniformly distributed, the tendon to be provided should be. (A) Straight below centroidal axis (B) Parabolic with convexity downward (C) Parabolic with convexity upward (D) Straight above centroidal axis

Last Answer : Answer: Option B

A pre-stressed rectangular beam which carries two concentrated loads W at L/3 from either end, is provided with a bent tendon with tension P such that central one-third portion of the tendon remains parallel to the longitudinal axis, the maximum dip h is (A) WL/P (B) WL/2P (C) WL/3P (D) WL/4P

Description : A pre-stressed rectangular beam which carries two concentrated loads W at L/3 from either end, is provided with a bent tendon with tension P such that central one-third portion of the tendon remains parallel to the longitudinal axis, the maximum dip h is (A) WL/P (B) WL/2P (C) WL/3P (D) WL/4P

Last Answer : Answer: Option C

If is the sectional area of a pre-stressed rectangular beam provided with a tendon pre-stressed by a force through its centroidal longitudinal axis, the compressive stress in concrete, is (A) P/A (B) A/P (C) P/2A (D) 2A/P

Description : If is the sectional area of a pre-stressed rectangular beam provided with a tendon pre-stressed by a force through its centroidal longitudinal axis, the compressive stress in concrete, is (A) P/A (B) A/P (C) P/2A (D) 2A/P

Last Answer : Answer: Option A

is the pre-stressed force applied to tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The minimum stress on the beam subjected to a maximum bending moment is (A) f = (P/A) - (Z/M) (B) f = (A/P) - (M/Z) (C) f = (P/A) - (M/Z) (D) f = (P/A) - (M/6Z)

Description : is the pre-stressed force applied to tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The minimum stress on the beam subjected to a maximum bending moment is (A) f = (P/A) - (Z/M) (B) f = (A/P) - (M/Z) (C) f = (P/A) - (M/Z) (D) f = (P/A) - (M/6Z)

Last Answer : Answer: Option C

In pre-stressed concrete (A) Forces of tension and compression change but lever arm remains unchanged (B) Forces of tension and compressions remain unchanged but lever arm changes with the moment (C) Both forces of tension and compression as well as lever arm change (D) Both forces of tension and compression as well as lever arm remain unchanged

Description : In pre-stressed concrete (A) Forces of tension and compression change but lever arm remains unchanged (B) Forces of tension and compressions remain unchanged but lever arm changes with the moment ( ... arm change (D) Both forces of tension and compression as well as lever arm remain unchanged

Last Answer : Answer: Option B

The purpose of reinforcement in pre-stressed concrete is (A) To provide adequate bond stress (B) To resist tensile stresses (C) To impart initial compressive stress in concrete (D) All of the above

Description : The purpose of reinforcement in pre-stressed concrete is (A) To provide adequate bond stress (B) To resist tensile stresses (C) To impart initial compressive stress in concrete (D) All of the above

Last Answer : Answer: Option C

A pre-stressed concrete pile is (A) Easy to handle (B) Lighter in weight (C) Extremely durable (D) All the above

Description : A pre-stressed concrete pile is (A) Easy to handle (B) Lighter in weight (C) Extremely durable (D) All the above

Last Answer : Answer: Option D

Suggest the minimum grade of concrete for following exposure condition. i) RCC work ii) Water retaining structure iii) Sea water construction iv) Pre-stressed concrete

Description : Suggest the minimum grade of concrete for following exposure condition. i) RCC work ii) Water retaining structure iii) Sea water construction iv) Pre-stressed concrete

Last Answer : Minimum grade of concrete for following exposure condition: i) RCC work = M 20 ii) Water retaining structure = M 25 iii) Sea water construction = M 20 for PCC and M 30 for RCC iv) Pre-stressed concrete = M 30

List various minor losses in fluid flow. Explain any one type with sketch and formula.

Description : List various minor losses in fluid flow. Explain any one type with sketch and formula.

Last Answer : List various minor losses a) Sudden expansion of pipe b) Sudden contraction of pipe c) Pipe fittings d) Bend in pipe e) Loss of head at Entry. f) Loss of ... The head loss resulting from pipe expansion may be greatly reduced by introducing gradual pipe transition known as diffuser. 

List the various losses on a DC Motor.

Description : List the various losses on a DC Motor. 

Last Answer : The various losses on a DC Motor: 1) Winding losses (Copper losses): i) Armature winding losses ii) Shunt field losses iii) Series field losses 2) Core losses (iron losses): 3) Brush contact losses: 4) Windage and frictional (Mechanical losses):

State various types of energy losses with their control measures in any utility.

Description : State various types of energy losses with their control measures in any utility.

Last Answer : Energy loss and control in any utility Energy saving opportunities in cooling tower (These measures will save electrical energy used in fan or pumps) 1. Follow manufacturer's recommended ... Preheating combustion air 10. Switching from steam to air atomization Switching to lower cost fuel

Which of the following losses of pre-stress occurs only in pre-tensioning and not in posttensioning? (A) Elastic shortening of concrete (B) Shrinkage of concrete (C) Creep of concrete (D) Loss due to frictio

Description : Which of the following losses of pre-stress occurs only in pre-tensioning and not in posttensioning? (A) Elastic shortening of concrete (B) Shrinkage of concrete (C) Creep of concrete (D) Loss due to friction

Last Answer : Answer: Option A

In case of flow through parallel pipes, (A) The head loss for all the pipes is same (B) The total discharge is equal to the sum of discharges in the various pipes (C) The total head loss is the sum of head losses in the various pipes (D) Both (A) and (B)

Description : In case of flow through parallel pipes, (A) The head loss for all the pipes is same (B) The total discharge is equal to the sum of discharges in the various pipes (C) The total head loss is the sum of head losses in the various pipes (D) Both (A) and (B)

Last Answer : Answer: Option D

If a Starfleet Officer dies, and is reincarnated as a member of a pre-warp civilisation, but retains all memories of her/his previous life, does the Prime Directive still apply to him?

Description : If a Starfleet Officer dies, and is reincarnated as a member of a pre-warp civilisation, but retains all memories of her/his previous life, does the Prime Directive still apply to him?

Last Answer : The Prime Directive doesn't seem to matter to those in the current non reincarnated Starfleet members. So no. However the Temporal prime directive might apply . I wonder about my own reincarnation If giving ... live a perfect life so that I am granted the freedom to make more changes to the thread.

Who became the first member of the Pre-Council of the Indian Subcontinent ?

Last Answer : : Syed Amir Ali , ( 1909-1927) became the first member of the Pre-Council of the Indian Subcontinent .

List three sources of pollutant from gasoline engine. Explain evaporative losses in detail.

Description : List three sources of pollutant from gasoline engine. Explain evaporative losses in detail.

Last Answer : Answer: Three sources of pollutant from gasoline engine:- 1) Carburettor losses 2) Crankcase blow-by 3) Engine exhaust emission Evaporative losses:-  1. Carburettor losses: occur due ... due to incomplete combustion, the exhaust gas also contains carbon monoxide, unburnt hydrocarbons (UBHC).

Write Chezy’s equation for frictional losses and list all the terms involved in it.

Description : Write Chezy’s equation for frictional losses and list all the terms involved in it.

Last Answer : Where; V = velocity of water in pipe,  m = hydraulic mean depth =A/P = d/4  I = loss of head per unit length,  C = Chezy’s constant

List out any six losses in steam turbine.

Description : List out any six losses in steam turbine.

Last Answer : Losses in steam turbine 1. Residual velocity loss 2. Loss due to friction 3. Leakage loss 4. Loss due mechanical friction 5. Radiation loss 6. Loss due to moisture 7.carry over losses

List out the different technical losses that takes place in Transmission and Distribution system.

Description : List out the different technical losses that takes place in Transmission and Distribution system.

Last Answer : Different technical losses that takes place in Transmission and Distribution system: 1) Losses due to random growth of sub transmission &distribution system. planned growth/expansion maintains ... unsatisfactory reactive power compensation. 6) Losses due to poor quality of equipment used. 

List out energy conservation techniques to be adopted to reduce losses in the induction motor.

Description : List out energy conservation techniques to be adopted to reduce losses in the induction motor.

Last Answer : Following are the list of energy conservation techniques in electrical motors:  1) Reduction in iron losses by using low loss silicon steel core material laminated to thinner dimension. 2) Using bigger ... balancing. 11) By improving power quality. 12) Operating motor in star mode at light load.

List the losses occurring in transformer.

Description : List the losses occurring in transformer.

Last Answer : (1) Iron losses: (a) Eddy current losses (b) Hysteresis losses (2) Copper losses