Accordingly to IS: 383-1970, a good aggregate for concrete construction should be (a) Chemically inert (b) Sufficiently strong (c)Sufficiently hard and durable (d) All the above

Accordingly to IS: 383-1970, a good aggregate for concrete construction should be
(a) Chemically inert
(b) Sufficiently strong
(c)Sufficiently hard and durable
(d) All the above
by

1 Answer

Answer :

(d) All the above
by

Related questions

According to IS : 382-1963, a good aggregate should be (A) Chemically inert (B) Sufficiently strong (C) Hard and durable (D) All the above

Description : According to IS : 382-1963, a good aggregate should be (A) Chemically inert (B) Sufficiently strong (C) Hard and durable (D) All the above

Last Answer : Answer: Option D

Due to Bleeding action concrete becomes [ A ] Weak [ B ] Strong [ C ] Hard [ D ] Durable

Description : Due to Bleeding action concrete becomes [ A ] Weak [ B ] Strong [ C ] Hard [ D ] Durable

Last Answer : [ A ] Weak

Inert material of a cement concrete mix, is (A) Water (B) Cement (C) Aggregate (D) None of these

Description : Inert material of a cement concrete mix, is (A) Water (B) Cement (C) Aggregate (D) None of these

Last Answer : Answer: Option C

Inert material of a cement concrete mix, is [ A ] Water [ B ] Aggregate [ C ] Cement [ D ] None of these

Description : Inert material of a cement concrete mix, is [ A ] Water [ B ] Aggregate [ C ] Cement [ D ] None of these

Last Answer : [ B ] Aggregate

For the construction of cement concrete floor, the maximum permissible size of aggregate, is (A) 4 mm (B) 6 mm (C) 8 mm (D) 10 mm

Description : For the construction of cement concrete floor, the maximum permissible size of aggregate, is (A) 4 mm (B) 6 mm (C) 8 mm (D) 10 mm

Last Answer : Answer: Option D

Saw dust can be rendered chemically inert by boiling it in water containing (A) Ferrous sulphate (B) Potassium chloride (C) Ammonia (D) Nitric acid

Description : Saw dust can be rendered chemically inert by boiling it in water containing (A) Ferrous sulphate (B) Potassium chloride (C) Ammonia (D) Nitric acid

Last Answer : Answer: Option A

For a good concrete (A) Aggregates should be hard and durable (B) Water should be free from organic materials (C) Cement should be sufficient to produce the required strength (D) All the above

Description : For a good concrete (A) Aggregates should be hard and durable (B) Water should be free from organic materials (C) Cement should be sufficient to produce the required strength (D) All the above

Last Answer : Answer: Option D

Generally accepted accounting principles (GAAP) are distinguished from generally accepted auditing standards (GAAS) in that: a. GAAP are the principles auditors follow when conducting an audit, while GAAS are the standards for presentation of financial statements and underlying transactions. b. GAAP are the principles for presentation of financial statements and underlying transactions, while GAAS are the standards that the auditors should follow when conducting an audit. c. When GAAP are violated, sufficiently strong GAAS may make up for most GAAP deficiencies. d. GAAP are promulgated by the SEC, while GAAS are promulgated by the PFRC

Description : Generally accepted accounting principles (GAAP) are distinguished from generally accepted auditing standards (GAAS) in that: a. GAAP are the principles auditors follow when conducting an audit, while GAAS ... deficiencies. d. GAAP are promulgated by the SEC, while GAAS are promulgated by the PFRC

Last Answer : GAAP are the principles for presentation of financial statements and underlying transactions, while GAAS are the standards that the auditors should follow when conducting an audit.

The design of a beam is based on strength criteria, if the beam is sufficiently strong to resist ----------------. a.Shear force b.deflection c. both a and b. d. none of the above.

Description : The design of a beam is based on strength criteria, if the beam is sufficiently strong to resist ----------------. a.Shear force b.deflection c. both a and b. d. none of the above.

Last Answer : a.Shear force

A yellow metallic powder is burnt in a stream of fluorine to obtain a colourless gas X which is thermally stable and chemically inert. Its molecule ha

Description : A yellow metallic powder is burnt in a stream of fluorine to obtain a colourless gas X which is thermally stable and chemically inert. Its molecule ha

Last Answer : A yellow metallic powder is burnt in a stream of fluorine to obtain a colourless gas X which is thermally stable ... and NaC1` D. `SF_(4) and SF_(6)`

Chemically inert halide of sulphur is

Description : Chemically inert halide of sulphur is

Last Answer : Chemically inert halide of sulphur is A. `S_(2)Cl_(2)` B. `SF_(4)` C. `SCl_(2)` D. `SF_(6)`

Inert gases are - (1) Miscible with water (2) Not stable (3) Chemically uncreative (4) Chemically very active

Description : Inert gases are - (1) Miscible with water (2) Not stable (3) Chemically uncreative (4) Chemically very active

Last Answer : (3) Chemically uncreative Explanation: An inert gas is a gas which does not undergo chemical reactions since their valence shells are filled, meaning they don't normally form chemical bonds with other ... inert gases, also called noble gases, are argon, helium, neon, krypton, xenon and radon.

Low density polythene as compared to high density polythene is (A) Harder (B) Tougher (C) Chemically inert (D) More flexible

Description : Low density polythene as compared to high density polythene is (A) Harder (B) Tougher (C) Chemically inert (D) More flexible

Last Answer : (D) More flexible

This plant species gives off secretions called Tabasheer which are 97% silica. It is claimed that this is a cure for coughs, asthma and is also an aphrodisiac. It is also true that Tabasheer is chemically inert, but may catalyse some chemical reactions. Where is Tabasheer normally obtained from?

Description : This plant species gives off secretions called Tabasheer which are 97% silica. It is claimed that this is a cure for coughs, asthma and is also an aphrodisiac. It is also true that Tabasheer is chemically inert, but may catalyse some chemical reactions. Where is Tabasheer normally obtained from?

Last Answer : Bamboo.

Inert gases are (1) Miscible with water (2) Not stable (3) Chemically unreactive (4) Chemically very active

Description : Inert gases are (1) Miscible with water (2) Not stable (3) Chemically unreactive (4) Chemically very active

Last Answer : Chemically unreactive

The inert mineral material used for the manufacture of mortars and concrete is (a) Cement (b) Water (c) Aggregates (d) Admixture

Description : The inert mineral material used for the manufacture of mortars and concrete is (a) Cement (b) Water (c) Aggregates (d) Admixture

Last Answer : (c) Aggregates

If aggregate impact value is 20 to 30 percent, then it is classified as (A) Exceptionally strong (B) Strong (C) Satisfactory for road surfacing (D) Unsuitable for road surfacing

Description : If aggregate impact value is 20 to 30 percent, then it is classified as (A) Exceptionally strong (B) Strong (C) Satisfactory for road surfacing (D) Unsuitable for road surfacing

Last Answer : Answer: Option C

The maximum limit of water absorption for aggregate suitable for road construction is (A) 0.4 % (B) 0.6 % (C) 0.8 % (D) 1.0 %

Description : The maximum limit of water absorption for aggregate suitable for road construction is (A) 0.4 % (B) 0.6 % (C) 0.8 % (D) 1.0 %

Last Answer : Answer: Option B

What is the cost for a V8 383 stroker for my 97 S-10?

Description : What is the cost for a V8 383 stroker for my 97 S-10?

Last Answer : A base engine with no intake manifold, pulleys, carburetor, or distributor will run around $3,400. https://www.westcoastengines.com/budget-383-stroker-for-sale

Suppose that we have numbers between 1 and 1000 in a binary search tree and want to search for the number 364. Which of the following sequences could not be the sequence of nodes examined? (A) 925, 221, 912, 245, 899, 259, 363, 364 (B) 3, 400, 388, 220, 267, 383, 382, 279, 364 (C) 926, 203, 912, 241, 913, 246, 364 (D) 3, 253, 402, 399, 331, 345, 398, 364

Description : Suppose that we have numbers between 1 and 1000 in a binary search tree and want to search for the number 364. Which of the following sequences could not be the sequence of nodes examined? (A) 925, 221, 912, 245, 899, ... 926, 203, 912, 241, 913, 246, 364 (D) 3, 253, 402, 399, 331, 345, 398, 364 

Last Answer : (C) 926, 203, 912, 241, 913, 246, 364

In designing concrete structures, normally maximum aggregate sizes are adopted with ranges from 10mm to 20mm. Does an increase of maximum aggregate size benefit the structures?

Description : In designing concrete structures, normally maximum aggregate sizes are adopted with ranges from 10mm to 20mm. Does an increase of maximum aggregate size benefit the structures?

Last Answer : To answer this question, let's consider an example of a cube. The surface area to volume ratio of a cube is 6/b where b is the length of the cube. This implies that ... requirement can offset the disadvantages brought about by discontinuities as suggested by Longman Scientific and Technical (1987).

For ensuring quality of concrete, use (A) Single sized aggregates (B) Two sized aggregate (C) Graded aggregates (D) Coarse aggregates

Description : For ensuring quality of concrete, use (A) Single sized aggregates (B) Two sized aggregate (C) Graded aggregates (D) Coarse aggregates

Last Answer : (C) Graded aggregates

Strength of concrete increases with (A) Increase in water-cement ratio (B) Increase in fineness of cement (C) Decrease in curing time (D) Decrease in size of aggregate

Description : Strength of concrete increases with (A) Increase in water-cement ratio (B) Increase in fineness of cement (C) Decrease in curing time (D) Decrease in size of aggregate

Last Answer : (B) Increase in fineness of cement

In order to obtain the best workability of concrete, the preferred shape of aggregate is (A) Rounded (B) Elongated (C) Angular (D) All of the above

Description : In order to obtain the best workability of concrete, the preferred shape of aggregate is (A) Rounded (B) Elongated (C) Angular (D) All of the above

Last Answer : Answer: Option A

Workability of concrete is inversely proportional to (A) Time of transit (B) water-cement ratio (C) The air in the mix (D) Size of aggregate

Description : Workability of concrete is inversely proportional to (A) Time of transit (B) water-cement ratio (C) The air in the mix (D) Size of aggregate

Last Answer : Answer: Option A

Pick up the correct statement from the following: (A) Continuous grading is not necessary for obtaining a minimum of air voids (B) The omission of a certain size of aggregate is shown by a straight horizontal line on the grading curve (C) The omission of a certain size of aggregate in concrete increases the workability but also increases the liability to segregation (D) All the above

Description : Pick up the correct statement from the following: (A) Continuous grading is not necessary for obtaining a minimum of air voids (B) The omission of a certain size of aggregate is shown by ... in concrete increases the workability but also increases the liability to segregation (D) All the above

Last Answer : Answer: Option D

C.R.R.I. charts are used to obtain a relationship between strength of concrete and (A) Water cement ratio (B) Workability (C) Grading of aggregate (D) Fineness modulus

Description : C.R.R.I. charts are used to obtain a relationship between strength of concrete and (A) Water cement ratio (B) Workability (C) Grading of aggregate (D) Fineness modulus

Last Answer : Answer: Option A

The type of aggregates not suitable for high strength concrete and for pavements subjected to tension, is (A) Rounded aggregate (B) Irregular aggregate (C) Angular aggregate (D) Flaky aggregat

Description : The type of aggregates not suitable for high strength concrete and for pavements subjected to tension, is (A) Rounded aggregate (B) Irregular aggregate (C) Angular aggregate (D) Flaky aggregat

Last Answer : Answer: Option A

The aggregate impact value of the aggregate used in (A) Building concrete is less than 45 (B) Road pavement concrete is less than 30 (C) Runway concrete is less than 30 (D) All the above

Description : The aggregate impact value of the aggregate used in (A) Building concrete is less than 45 (B) Road pavement concrete is less than 30 (C) Runway concrete is less than 30 (D) All the above

Last Answer : Answer: Option D

Workability of concrete for a given water content is good if the aggregates, are (A) Rounded aggregate (B) Irregular aggregate (C) Angular aggregate (D) Flaky aggregate

Description : Workability of concrete for a given water content is good if the aggregates, are (A) Rounded aggregate (B) Irregular aggregate (C) Angular aggregate (D) Flaky aggregate

Last Answer : Answer: Option A

If the engineer-in-charge approves, the 10 cm cubes may be used for the work test of concrete provided maximum nominal size of aggregate, does not exceed (A) 10 cm (B) 15 cm (C) 20 cm (D) 25 cm

Description : If the engineer-in-charge approves, the 10 cm cubes may be used for the work test of concrete provided maximum nominal size of aggregate, does not exceed (A) 10 cm (B) 15 cm (C) 20 cm (D) 25 cm

Last Answer : Answer: Option C

Pick up the correct statement from the following: (A) A highly absorptive aggregate reduces the workability of concrete considerably (B) The specific gravity of aggregate is important for the determination of the moisture content (C) The absorption and porosity of an aggregate influence the property of the concrete (D) All the above

Description : Pick up the correct statement from the following: (A) A highly absorptive aggregate reduces the workability of concrete considerably (B) The specific gravity of aggregate is important for the determination ... and porosity of an aggregate influence the property of the concrete (D) All the above

Last Answer : Answer: Option D

Workability of concrete is directly proportional to (A) Aggregate cement ratio (B) Time of transit (C) Grading of the aggregate (D) All of above

Description : Workability of concrete is directly proportional to (A) Aggregate cement ratio (B) Time of transit (C) Grading of the aggregate (D) All of above

Last Answer : Answer: Option C

Strength of cement concrete primarily depends upon (A) Quality of water (B) Quantity of aggregate (C) Quantity of cement (D) Water-cement

Description : Strength of cement concrete primarily depends upon (A) Quality of water (B) Quantity of aggregate (C) Quantity of cement (D) Water-cement

Last Answer : Answer: Option D

The ratio of differenct ingredients (cement, sand and aggregate) in concrete mix of grade M20 is. (a) 1:1:2 (b) 1:1.5:2 (c) 1:2:4 (d) 1:3:6

Description : The ratio of differenct ingredients (cement, sand and aggregate) in concrete mix of grade M20 is. (a) 1:1:2 (b) 1:1.5:2 (c) 1:2:4 (d) 1:3:6

Last Answer : (b) 1:1.5:2

For the improvement of work ability of concrete , the shape of aggregate recommended is (a) Irregular (b) Angular (c) Round (d) Flaky

Description : For the improvement of work ability of concrete , the shape of aggregate recommended is (a) Irregular (b) Angular (c) Round (d) Flaky

Last Answer : (c) Round

According to the rule of water cement ratio, the strength of concrete wholly depends upon. (a) The quality of cement. (b) The quality of cement mixed with aggregate. (c) The amount of water used in preparation of concrete mix. (d) All of the above

Description : According to the rule of water cement ratio, the strength of concrete wholly depends upon. (a) The quality of cement. (b) The quality of cement mixed with aggregate. (c) The amount of water used in preparation of concrete mix. (d) All of the above

Last Answer : (c) The amount of water used in preparation of concrete mix.

The deleterious materials present in the aggregate (a) Prevent normal hydration of cement (b) Reduce the strength and durability of concrete. (c) Modify the setting action and cause efloresecence. (d) All of the above

Description : The deleterious materials present in the aggregate (a) Prevent normal hydration of cement (b) Reduce the strength and durability of concrete. (c) Modify the setting action and cause efloresecence. (d) All of the above

Last Answer : (d) All of the above

Which of the following statement is correct (a) The maximum size of coarse aggregate should not exceed one fourth of the minimum dimension of the plain concrete member. (b) The maximum size of coarse aggregate should not exceed one fifty of the minimum dimension of the reinforced concrete member (c)The aggregates of 40mm, 20mm and 10mm sizes are commonly used for concrete works (d) All the above

Description : Which of the following statement is correct (a) The maximum size of coarse aggregate should not exceed one fourth of the minimum dimension of the plain concrete member. (b) The maximum size of coarse ... aggregates of 40mm, 20mm and 10mm sizes are commonly used for concrete works (d) All the above

Last Answer : (d) All the above

For the manufacture of concrete a low density, the aggregate used is (a) Furnace clinker (b) Coke breeze (c)Saw dust (d) All the above

Description : For the manufacture of concrete a low density, the aggregate used is (a) Furnace clinker (b) Coke breeze (c)Saw dust (d) All the above

Last Answer : (d) All the above

For reinforced concrete, the aggregate used is (a) Sand (b) Gravel (c) Crushed rock (d) All of these

Description : For reinforced concrete, the aggregate used is (a) Sand (b) Gravel (c) Crushed rock (d) All of these

Last Answer : (d) All of these

The material used as an ingredient of concrete is usually (a) Cement (b) Aggregate (c) Water (d) All the above

Description : The material used as an ingredient of concrete is usually (a) Cement (b) Aggregate (c) Water (d) All the above

Last Answer : (d) All the above

The workability of concrete is mostly influenced by its [ A ] Water cement ratio [ B ] Aggregate cement ratio [ C ] Cement content [ D ] Water content

Description : The workability of concrete is mostly influenced by its [ A ] Water cement ratio [ B ] Aggregate cement ratio [ C ] Cement content [ D ] Water content

Last Answer : [ A ] Water cement ratio

Modulus of elasticity of concrete is primarily influenced by [ A ] Elastic properties of aggregate [ B ] Curing of concrete [ C ] Age of concrete [ D ] Mix proportion and type of cement

Description : Modulus of elasticity of concrete is primarily influenced by [ A ] Elastic properties of aggregate [ B ] Curing of concrete [ C ] Age of concrete [ D ] Mix proportion and type of cement

Last Answer : [ A ] Elastic properties of aggregate

A pre-stressed concrete pile is (A) Easy to handle (B) Lighter in weight (C) Extremely durable (D) All the above

Description : A pre-stressed concrete pile is (A) Easy to handle (B) Lighter in weight (C) Extremely durable (D) All the above

Last Answer : Answer: Option D

The main function of a divide wall is to (A) Control the silt entry in the canal (B) Prevent river floods from entering the canal (C) Separate the under-sluices from weir proper (D) Provide smooth flow at sufficiently low velocity

Description : The main function of a divide wall is to (A) Control the silt entry in the canal (B) Prevent river floods from entering the canal (C) Separate the under-sluices from weir proper (D) Provide smooth flow at sufficiently low velocity

Last Answer : Answer: Option C

For preparing porcelains, the clay should be (A) Sufficiently pure (B) Of high degree of tenacity (C) Of good plasticity (D) All the above

Description : For preparing porcelains, the clay should be (A) Sufficiently pure (B) Of high degree of tenacity (C) Of good plasticity (D) All the above

Last Answer : Answer: Option D

How to choose strong and durable workwear?

Description : How to choose strong and durable workwear?

Last Answer : Industrial workers need additional protection. The role of such protection is performed by overalls - for example, it reduces the risk of bodily harm, injury, pollution or contact with aggressive ... fulfill all the tasks assigned to it to ensure the protection of workers in production processes.

How to make construction profitable and a house durable?

Description : How to make construction profitable and a house durable?

Last Answer : It so happened that we often make excessive demands on anything, wanting to save money and get high quality as a result. Especially in the case of building a house. Is it possible to save on ... immersed in the ground. Usually there are two of them - the method of indentation and screwing in.

The lintels are preferred to arches because (A) Arches require more headroom to span the openings like doors, windows etc. (B) Arches require strong abutments to withstand arch thrust (C) Arches are difficult in construction (D) All of the abo

Description : The lintels are preferred to arches because (A) Arches require more headroom to span the openings like doors, windows etc. (B) Arches require strong abutments to withstand arch thrust (C) Arches are difficult in construction (D) All of the above

Last Answer : Answer: Option D