The maximum number of steps in a flight should generally be restricted to (A) 10 (B) 12 (C) 15 (D) No limit

The maximum number of steps in a flight should generally be restricted to
(A) 10
(B) 12
(C) 15
(D) No limit
by

1 Answer

Answer :

Answer: Option B
by

Related questions

The number of steps in a flight generally should not be less than (A) 2 (B) 3 (C) 5 (D) No limit

Description : The number of steps in a flight generally should not be less than (A) 2 (B) 3 (C) 5 (D) No limit

Last Answer : Option B

Temperature of preheated air used for the transportation of pulverised coal through pipes to the burner of a boiler furnace is restricted to a maximum limit of about 300° C to avoid the (A) Requirement of large volume combustion chamber (B) Risk of explosion (C) Chances of clinker formation (D) Incomplete combustion of coal

Description : Temperature of preheated air used for the transportation of pulverised coal through pipes to the burner of a boiler furnace is restricted to a maximum limit of about 300° C to avoid the (A) ... chamber (B) Risk of explosion (C) Chances of clinker formation (D) Incomplete combustion of coal

Last Answer : (B) Risk of explosion

If the width of the foundation for two equal columns is restricted, the shape of the footing generally adopted, is (A) Square (B) Rectangular (C) Trapezoidal (D) Triangular

Description : If the width of the foundation for two equal columns is restricted, the shape of the footing generally adopted, is (A) Square (B) Rectangular (C) Trapezoidal (D) Triangular

Last Answer : Answer: Option B

The Maximum strength attained in concrete in limit state design is generally taken as [ A ] fck [ B ] 0.67 fck [ C ] 0.45 fck [ D ] 0.30 fck

Description : The Maximum strength attained in concrete in limit state design is generally taken as [ A ] fck [ B ] 0.67 fck [ C ] 0.45 fck [ D ] 0.30 fck

Last Answer : [ C ] 0.45 fck

For stairs spanning l metres longitudinally between supports at the bottom and top of a flight carrying a load w per unit horizontal area, the maximum bending moment per metre width, is (A) wl²/4 (B) wl²/8 (C) wl²/12 (D) wl²/16

Description : For stairs spanning l metres longitudinally between supports at the bottom and top of a flight carrying a load w per unit horizontal area, the maximum bending moment per metre width, is (A) wl²/4 (B) wl²/8 (C) wl²/12 (D) wl²/16

Last Answer : Answer: Option D

Maximum allowable spacing of shear reinforcement for inclined stirrups with an inclination of 45° is restricted to [ A ] 0.75 d [ B ] 0.45 d [ C ] 0.90 d [ D ] d

Description : Maximum allowable spacing of shear reinforcement for inclined stirrups with an inclination of 45° is restricted to [ A ] 0.75 d [ B ] 0.45 d [ C ] 0.90 d [ D ] d

Last Answer : [ D ] d

Maximum allowable spacing of shear reinforcement for vertical stirrups is restricted to [ A ] d [ B ] 0.45 d [ C ] 0.75 d [ D ] 0.90 d

Description : Maximum allowable spacing of shear reinforcement for vertical stirrups is restricted to [ A ] d [ B ] 0.45 d [ C ] 0.75 d [ D ] 0.90 d

Last Answer : [ C ] 0.75 d

Thickness of broken line markings on multi-lane road for lanes is generally kept (A) 10 cm (B) 12 cm (C) 15 cm (D) 18 cm

Description : Thickness of broken line markings on multi-lane road for lanes is generally kept (A) 10 cm (B) 12 cm (C) 15 cm (D) 18 cm

Last Answer : Answer: Option A

Thickness of broken centre line markings for a four lane road, is generally kept (A) 10 cm (B) 12 cm (C) 15 cm (D) 18 cm

Description : Thickness of broken centre line markings for a four lane road, is generally kept (A) 10 cm (B) 12 cm (C) 15 cm (D) 18 cm

Last Answer : Answer: Option C

Super-elevation on roads in snow bound areas, should generally not exceed (A) 15 % (B) 12 % (C) 10 % (D) 7 %

Description : Super-elevation on roads in snow bound areas, should generally not exceed (A) 15 % (B) 12 % (C) 10 % (D) 7 %

Last Answer : Answer: Option D

Natural air cooling is generally restricted for transformers up to?

Last Answer : Natural air cooling is generally restricted for transformers up to 1.5 MVA .

A 8 metre long simply supported rectangular beam which carries a distributed load 45 kg/m. experiences a maximum fibre stress 160 kg/cm2 . If the moment of inertia of the beam is 640 cm4 , the overall depth of the beam is (A) 10 cm (B) 12 cm (C) 15 cm (D) 18 cm

Description : A 8 metre long simply supported rectangular beam which carries a distributed load 45 kg/m. experiences a maximum fibre stress 160 kg/cm2 . If the moment of inertia of the beam is 640 cm4 , the overall depth of the beam is (A) 10 cm (B) 12 cm (C) 15 cm (D) 18 cm

Last Answer : (A) 10 cm

To ensure that bullock carts may not overturn on curves, the maximum value of super-elevation, recommended by I.R.C., is (A) 1 in 10 (B) 1 in 12 (C) 1 in 15 (D) 1 in 20

Description : To ensure that bullock carts may not overturn on curves, the maximum value of super-elevation, recommended by I.R.C., is (A) 1 in 10 (B) 1 in 12 (C) 1 in 15 (D) 1 in 20

Last Answer : Answer: Option C

What is the maximum limit on cash payment that is to be made to the beneficiary under MTSS in India? A. Rs. 25,000 B. Rs. 15,000 C. Rs. 10,000 D. Rs. 40,000 E. Rs. 50,000

Description : What is the maximum limit on cash payment that is to be made to the beneficiary under MTSS in India? A. Rs. 25,000 B. Rs. 15,000 C. Rs. 10,000 D. Rs. 40,000 E. Rs. 50,000

Last Answer : E. Rs. 50,000 Explanation: Amounts up to INR 50,000/- may be paid in cash to a beneficiary in India. These can also be loaded on to a pre-paid card issued by banks. Any ... However, in exceptional circumstances, where the beneficiary is a foreign tourist, higher amounts may be disbursed in cash.

What is the homophones for a flight of steps and too look fixedly?

Description : What is the homophones for a flight of steps and too look fixedly?

Last Answer : Need answer

Clearance limit is defined as: a. The flight level to which an aircraft is granted ATC clearance b. The time at which the ATC clearance expires c. The point to which aircraft is granted ATC clearance d. The height below which you will hit the first obstacle

Description : Clearance limit is defined as: a. The flight level to which an aircraft is granted ATC clearance b. The time at which the ATC clearance expires c. The point to which aircraft is granted ATC clearance d. The height below which you will hit the first obstacle

Last Answer : c. The point to which aircraft is granted ATC clearance

Clearance limit is defined as: a. The flight level to which an aircraft is granted ATC clearance b. The time at which the ATC clearance expires c. The point to which aircraft is granted ATC clearance d. The height below which you will hit the first obstacle

Description : Clearance limit is defined as: a. The flight level to which an aircraft is granted ATC clearance b. The time at which the ATC clearance expires c. The point to which aircraft is granted ATC clearance d. The height below which you will hit the first obstacle

Last Answer : c. The point to which aircraft is granted ATC clearance

What is the maximum number of starred questions that can be asked in Lok Sabha on a particular day? (1) 15 (2) 20 (3) 25 (4) Without limit

Description : What is the maximum number of starred questions that can be asked in Lok Sabha on a particular day? (1) 15 (2) 20 (3) 25 (4) Without limit

Last Answer : (2) 20 Explanation: The maximum number of Questions to be placed on the list of Questions for oral answers (Starred Question) on a particular day is 20, while the maximum number of questions ... Questions may exceed by a maximum of 25 Questions pertaining to State/States under President's Rule.

The width of the entrances of the harbours is restricted to (A) 100 m (B) 125 m (C) 150 m (D) 180 m

Description : The width of the entrances of the harbours is restricted to (A) 100 m (B) 125 m (C) 150 m (D) 180 m

Last Answer : (D) 180 m

According to IS:456-2000, the total acid soluble chlorides in concrete is restricted to________ of concrete [ A ] 0.2 kg/m3 [ B ] 0.4 kg/m3 [ C ] 2 kg/m3 [ D ] 4 kg/m3

Description : According to IS:456-2000, the total acid soluble chlorides in concrete is restricted to________ of concrete [ A ] 0.2 kg/m3 [ B ] 0.4 kg/m3 [ C ] 2 kg/m3 [ D ] 4 kg/m3

Last Answer : [ B ] 0.4 kg/m3

According to IS:456-2000, the total acid soluble chlorides in concrete is restricted to________ of concrete [ A ] 0.2 kg/m3 [ B ] 0.4 kg/m3 [ C ] 2 kg/m3 [ D ] 4 kg/m3

Description : According to IS:456-2000, the total acid soluble chlorides in concrete is restricted to________ of concrete [ A ] 0.2 kg/m3 [ B ] 0.4 kg/m3 [ C ] 2 kg/m3 [ D ] 4 kg/m3

Last Answer : [ B ] 0.4 kg/m3

The nitrate concentration in domestic water supplies, is generally limited to (A) 10 ppm (B) 15 ppm (C) 30 ppm (D) 45 ppm

Description : The nitrate concentration in domestic water supplies, is generally limited to (A) 10 ppm (B) 15 ppm (C) 30 ppm (D) 45 ppm

Last Answer : (D) 45 ppm

Metric chains are generally available in (A) 10 m and 20 m length (B) 15 m and 20 m length (C) 20 m and 30 m length (D) 25 m and 100 m length

Description : Metric chains are generally available in (A) 10 m and 20 m length (B) 15 m and 20 m length (C) 20 m and 30 m length (D) 25 m and 100 m length

Last Answer : (C) 20 m and 30 m length

The bearing capacity of granite is generally (A) 5 to 10 kg/cm2 (B) 15 to 20 kg/cm2 (C) 30 to 35 kg/cm2 (D) 40 to 45 kg/cm2

Description : The bearing capacity of granite is generally (A) 5 to 10 kg/cm2 (B) 15 to 20 kg/cm2 (C) 30 to 35 kg/cm2 (D) 40 to 45 kg/cm2

Last Answer : Answer: Option C

The thickness of a reinforced brick partition wall, is generally kept (A) 5 cm (B) 10 cm (C) 15 cm (D) 20 cm

Description : The thickness of a reinforced brick partition wall, is generally kept (A) 5 cm (B) 10 cm (C) 15 cm (D) 20 cm

Last Answer : Answer: Option B

The practical limit of moisture content achieved in air drying of timber is (A) 5 % (B) 15 % (C) 25 % (D) 35

Description : The practical limit of moisture content achieved in air drying of timber is (A) 5 % (B) 15 % (C) 25 % (D) 35 %

Last Answer : Answer: Option B

Partial safety factor for strength in steel m Limit state design is [ A ] 1.15 [ B ] 1.25 [ C ] 1.5 [ D ] 1.65

Description : Partial safety factor for strength in steel m Limit state design is [ A ] 1.15 [ B ] 1.25 [ C ] 1.5 [ D ] 1.65

Last Answer : [ A ] 1.15

Partial safety factor for strength of concrete in Limit state design is [ A ] 1.15 [ B ] 1.25 [ C ] 1.5 [ D ] 1.65

Description : Partial safety factor for strength of concrete in Limit state design is [ A ] 1.15 [ B ] 1.25 [ C ] 1.5 [ D ] 1.65

Last Answer : [ C ] 1.5

Partial safety factor for strength in steel m Limit state design is [ A ] 1.15 [ B ] 1.25 [ C ] 1.5 [ D ] 1.65

Description : Partial safety factor for strength in steel m Limit state design is [ A ] 1.15 [ B ] 1.25 [ C ] 1.5 [ D ] 1.65

Last Answer : [ A ] 1.15

Partial safety factor for strength of concrete in Limit state design is [ A ] 1.15 [ B ] 1.25 [ C ] 1.5 [ D ] 1.65

Description : Partial safety factor for strength of concrete in Limit state design is [ A ] 1.15 [ B ] 1.25 [ C ] 1.5 [ D ] 1.65

Last Answer : [ C ] 1.5

In Limit state method of design, the factor of safety for concrete and steel respectively are [ A ] 3.00 and 1.80 [ B ] 1.50 and 1.18 [ C ] 1.50 and 1.15 [ D ] 1.50 and 1.50

Description : In Limit state method of design, the factor of safety for concrete and steel respectively are [ A ] 3.00 and 1.80 [ B ] 1.50 and 1.18 [ C ] 1.50 and 1.15 [ D ] 1.50 and 1.50

Last Answer : [ C ] 1.50 and 1.15

Generally air parcels are subject to the lower limit of weight of a) 25 Kg b) 30 Kg c) 10 Kg d) 20 Kg

Description : Generally air parcels are subject to the lower limit of weight of a) 25 Kg b) 30 Kg c) 10 Kg d) 20 Kg

Last Answer : c) 10 Kg

MIS account in multiple of Rs. 1500/- can be made instead of Rs. 1000/- MIS and the maximum limit of investment in a single account has been raised from Rs. 3 lakh to Rs. 4.5 lakh and in joint account opened by two or three adults; the maximum limit has been raised from Rs. 6 lakh to Rs. 9 Lakh. Wef a) 01.8.2007 b) 12.5.2008 c) 30.08.2009 d) None of these

Description : MIS account in multiple of Rs. 1500/- can be made instead of Rs. 1000/- MIS and the maximum limit of investment in a single account has been raised from Rs. 3 lakh to Rs. 4.5 lakh and in joint account opened by two ... to Rs. 9 Lakh. Wef a) 01.8.2007 b) 12.5.2008 c) 30.08.2009 d) None of these

Last Answer : a) 01.8.2007

Why is damage to the ozone layer a cause for concern? What steps are being taken to limit this damage? -Biology

Description : Why is damage to the ozone layer a cause for concern? What steps are being taken to limit this damage? -Biology

Last Answer : The ozone shields the surface of the earth from ultraviolet (UV) radiation from the sun. These radiations are highly damaging as they can cause cancer in both plants and animals, ... United Nations Environment Programme (UNEP) succeeded in reaching an agreement to freeze CFC production at 1986

Why is damage to the ozone layer a cause for concern ? What steps are being taken to limit this damage ? -Biology

Description : Why is damage to the ozone layer a cause for concern ? What steps are being taken to limit this damage ? -Biology

Last Answer : The damage to the ozone layer is a cause for concern because if the ozone layer in the atmosphere disappears completely, then all the extremely harmful ultraviolet radiations coming from the ... ) unanimously forged an agreement among its member countries to freeze CFC production at 1986 levels.

Maximum shear stress theory for the failure of a material at the elastic limit, is known (A) Guest's or Trecas' theory (B) St. Venant's theory (C) Rankine's theory (D) Haig's theory

Description : Maximum shear stress theory for the failure of a material at the elastic limit, is known  (A) Guest's or Trecas' theory  (B) St. Venant's theory  (C) Rankine's theory  (D) Haig's theory

Last Answer : (A) Guest's or Trecas' theory

Maximum strain theory for the failure of a material at the elastic limit, is known as (A) Guest's or Trecas' theory (B) St. Venant's theory (C) Rankine's theory (D) Haig's theory

Description : Maximum strain theory for the failure of a material at the elastic limit, is known as  (A) Guest's or Trecas' theory  (B) St. Venant's theory  (C) Rankine's theory  (D) Haig's theory 

Last Answer : (B) St. Venant's theory

The maximum water content at which a reduction in water content does not cause a decrease in volume of a soil mass, is known (A) Liquid limit (B) Plastic limit (C) Shrinkage limit (D) Permeability limit

Description : The maximum water content at which a reduction in water content does not cause a decrease in volume of a soil mass, is known (A) Liquid limit (B) Plastic limit (C) Shrinkage limit (D) Permeability limit

Last Answer : (C) Shrinkage limit

The maximum limit of water absorption for aggregate suitable for road construction is (A) 0.4 % (B) 0.6 % (C) 0.8 % (D) 1.0 %

Description : The maximum limit of water absorption for aggregate suitable for road construction is (A) 0.4 % (B) 0.6 % (C) 0.8 % (D) 1.0 %

Last Answer : Answer: Option B

For a cantilever of effective depth of 0.5 m, the maximum span to satisfy vertical deflection limit is (A) 3.5 m (B) 4 m (C) 4.5 m (D) 5 m

Description : For a cantilever of effective depth of 0.5 m, the maximum span to satisfy vertical deflection limit is (A) 3.5 m (B) 4 m (C) 4.5 m (D) 5 m

Last Answer : Answer: Option A

In Limit state design, the maximum working load that the structure has to withstand is called [ A ] Service load [ B ] Factored load [ C ] Characteristic load [ D ] Ultimate load

Description : In Limit state design, the maximum working load that the structure has to withstand is called [ A ] Service load [ B ] Factored load [ C ] Characteristic load [ D ] Ultimate load

Last Answer : [ C ] Characteristic load

In Limit state design, the maximum working load that the structure has to withstand is called [ A ] Service load [ B ] Factored load [ C ] Characteristic load [ D ] Ultimate load

Description : In Limit state design, the maximum working load that the structure has to withstand is called [ A ] Service load [ B ] Factored load [ C ] Characteristic load [ D ] Ultimate load

Last Answer : [ C ] Characteristic load

The maximum number of nominated members to the Rajya Sabha are – (1) 10 (2) 12 (3) 14 (4) 15

Description : The maximum number of nominated members to the Rajya Sabha are – (1) 10 (2) 12 (3) 14 (4) 15

Last Answer : (2) 12 Explanation: Rajya Sabha membership is limited to 250 members, 12 of whom are nominated by the President of India for their contributions to art, literature, science, and social services. The remainder of the body is elected by the state and territorial legislatures.

For a clay slope of height of 10 m, the stability number is 0.05, = 2.0 t/m3 , C = 2.5 t/m2 , the critical height of the slope of the soil, is (A) 4.0 m (B) 12.5 m (C) 25.0 m (D) 15.0 m

Description : For a clay slope of height of 10 m, the stability number is 0.05, = 2.0 t/m3 , C = 2.5 t/m2 , the critical height of the slope of the soil, is (A) 4.0 m (B) 12.5 m (C) 25.0 m (D) 15.0 m

Last Answer : (C) 25.0 m

If a ‘vertical aerial photograph’, (20 cm x 20 cm) in size, on a R.F.I: 10,000, has 60% longitudinal overlap and 40% side overlap, the actual ground length covered by each photograph in the longitudinal direction of the flight will be : (a) 4 km (b) 6 km (c) 0.8 km (d) 0.4 km

Description : If a ‘vertical aerial photograph’, (20 cm x 20 cm) in size, on a R.F.I: 10,000, has 60% longitudinal overlap and 40% side overlap, the actual ground length covered by each photograph in the longitudinal direction of the flight will be : (a) 4 km (b) 6 km (c) 0.8 km (d) 0.4 km

Last Answer : .8

Which Ethernet system is restricted only to 100 m? A. 10 Base T B. 20 Base 2 C. 10 Base 5 D. 10 Base 1

Description : Which Ethernet system is restricted only to 100 m? A. 10 Base T B. 20 Base 2 C. 10 Base 5 D. 10 Base 1

Last Answer : A. 10 Base T

The drainage area of a town is 12 hectares. Its 40% area is hard pavement ( K = 0.85), the 40% area is unpaved streets (K = 0.20) and the remaining is wooded areas (K = 0.15). Assuming the time of concentration for the areas as 30 minutes and using the formula Ps = 900/(t + 60) the maximum run off is A. 0.10 cumec B. 0.12 cumec C. 0.15 cumec D. 0.20 cumec

Description : The drainage area of a town is 12 hectares. Its 40% area is hard pavement ( K = 0.85), the 40% area is unpaved streets (K = 0.20) and the remaining is wooded areas (K = 0.15). Assuming the time of concentration ... 60) the maximum run off is A. 0.10 cumec B. 0.12 cumec C. 0.15 cumec D. 0.20 cumec

Last Answer : ANS: C

The maximum V belt sag when applying finger pressure is a) 10 mm b) 12 mm c) 15 mm d) 17 mm

Description : The maximum V belt sag when applying finger pressure is a) 10 mm b) 12 mm c) 15 mm d) 17 mm

Last Answer : c) 15 mm