The maximum V belt sag when applying finger pressure is a) 10 mm b) 12 mm c) 15 mm d) 17 mm

The maximum V belt sag when applying finger pressure is
a) 10 mm
b) 12 mm
c) 15 mm
d) 17 mm
by

1 Answer

Answer :

c) 15 mm
by

Related questions

Horse latitude lies in between north and south latitudinal belt of equator (A)0 to 50 (B) 30 to 35 (C) 20 to 250 (D) 10 to 15

Description : Horse latitude lies in between north and south latitudinal belt of equator (A)0 to 50 (B) 30 to 35 (C) 20 to 250 (D) 10 to 15

Last Answer : (B) 30 to 35

Pick up the incorrect statement from the following: (A) While measuring a distance with a tape of length 100.005 m, the distance to be increasing by 0.005 m for each tape length (B) An increase in temperature causes a tape to increase in length and the measured distance is too large (C) The straight distance between end points of a suspended tape is reduced by an amount called the sag correction (D) A 100 m tape of cross section 10 mm × 0.25 mm stretches about 10 mm under 5 kg pull

Description : Pick up the incorrect statement from the following: (A) While measuring a distance with a tape of length 100.005 m, the distance to be increasing by 0.005 m for each tape length (B) An increase in ... ) A 100 m tape of cross section 10 mm 0.25 mm stretches about 10 mm under 5 kg pull

Last Answer : (B) An increase in temperature causes a tape to increase in length and the measured distance is too large

The number of Agro-climatic zones of India is (A) 17 (B) 7 (C) 15 (D)10

Description : The number of Agro-climatic zones of India is (A) 17 (B) 7 (C) 15 (D)10

Last Answer : (D)10

In precision theodolite traverse if included angles are read twice and the mean reading accepted using both verniers having a least count of 30". Assuming the instrument to be in perfect adjustment, linear measurements correct to 6 mm per 30 metre tape duly corrected for temperature, slope and sag, the angular error of closure not to exceed (where n is the number of traverse legs) (A) 50" n(B) 30" n(C) 60" n (D) None of these

Description : In precision theodolite traverse if included angles are read twice and the mean reading accepted using both verniers having a least count of 30". Assuming the instrument to be in perfect adjustment, linear measurements correct to 6 mm per ... legs) (A) 50" n (B) 30" n (C) 60" n (D) None of these

Last Answer : (A) 50" n

Agroclimatic zones in India are (A)18 (B) 15 (C) 20 (D) 17

Description : Agroclimatic zones in India are (A)18 (B) 15 (C) 20 (D) 17

Last Answer : (B) 15

How many agro-climatic zones are found in India? (a) 15 (b) 16 (c) 17 (d) 18

Description : How many agro-climatic zones are found in India? (a) 15 (b) 16 (c) 17 (d) 18

Last Answer : (a) 15

Maximum moisture content for safe storage in wheat seed is (a) 12 (b) 15 (c) 7 (d) 20

Description : Maximum moisture content for safe storage in wheat seed is (a) 12 (b) 15 (c) 7 (d) 20

Last Answer : (a) 12

Sulphur content (%) in potassium sulphate fertilizer is (a) 50(b) 22 (c) 17 (d) 12

Description : Sulphur content (%) in potassium sulphate fertilizer is (a) 50(b) 22 (c) 17 (d) 12

Last Answer : (b) 22

Maximum root zone depth for Maize (a) 200-300 mm (b) 400-600 mm (c) 500-600 mm (d) 350- 450 mm

Description : Maximum root zone depth for Maize (a) 200-300 mm (b) 400-600 mm (c) 500-600 mm (d) 350- 450 mm

Last Answer : (b) 400-600 mm

In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right compensation, the trajectory of the cutter will be a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5) b.(0,-5), (55,-5), (55, 35), (-5, 35), (-5,-5) c.(5, 5), (5, 25), (45, 25), (45, 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)

Description : In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right ... , 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)

Last Answer : a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5)

In India, which one of the following should be considered the right combination of the age in days and live body weight in kg for a lamb for its weaning ? (A) 20 days to 30 days and 6 kg to 7 kg (B) 45 days to 60 days and 8 kg to 10 kg (C) 105 days to 120 days and 18 kg to 21 kg (D) 75 days to 90 days and 12 kg to 15 kg (E) 55 days to 70 days and 9 kg to 11 kg

Description : In India, which one of the following should be considered the right combination of the age in days and live body weight in kg for a lamb for its weaning ? (A) 20 days to 30 days and 6 kg to 7 kg (B) 45 days to 60 ... (D) 75 days to 90 days and 12 kg to 15 kg (E) 55 days to 70 days and 9 kg to 11 kg

Last Answer : (C) 105 days to 120 days and 18 kg to 21 kg

Under Sprinkler Irrigation what is the Land Saving Percent? [a] 5-11% [b] 10-16% [c] 17-22% [d] 23-30% [e] 35-42%

Description : Under Sprinkler Irrigation what is the Land Saving Percent? [a] 5-11% [b] 10-16% [c] 17-22% [d] 23-30% [e] 35-42%

Last Answer : [b] 10-16%

A pressure conduit carrying water beneath a stream or a canal, is known as (A) Sag (B) Depressed pipe (C) Inverted syphon (D) All the above

Description : A pressure conduit carrying water beneath a stream or a canal, is known as  (A) Sag  (B) Depressed pipe  (C) Inverted syphon  (D) All the above 

Last Answer : (D) All the above 

A beam of uniform rectangular section 200 mm wide and 300mm deep is simply supported at its ends.It carries a uniformly distributed load of 9KN/m run over the entire span of 5m.If E=1×104 N/mm2, what is the maximum deflection? a.14.26 mm b.17.28 mm c.18.53 mm d.16.27 mm.

Description : A beam of uniform rectangular section 200 mm wide and 300mm deep is simply supported at its ends.It carries a uniformly distributed load of 9KN/m run over the entire span of 5m.If E=1×104 N/mm2, what is the maximum deflection? a.14.26 mm b.17.28 mm c.18.53 mm d.16.27 mm.

Last Answer : d.16.27 mm.

Does a parent's income count against 17-year-olds applying for financial aid for students?

Description : Does a parent's income count against 17-year-olds applying for financial aid for students?

Last Answer : Yes, your income as a parent does count against your student applying for college. If you make too much money, she might not be able to get any financial aid at all.

Which one of the following would be the probable date of kidding for a she-goat that has been successfully serviced on First of March ? (All dates belong to the same year) (A) June 12 (B) July 29 (C) August 28 (D) September 15 (E) May 30

Description : Which one of the following would be the probable date of kidding for a she-goat that has been successfully serviced on First of March ? (All dates belong to the same year) (A) June 12 (B) July 29 (C) August 28 (D) September 15 (E) May 30

Last Answer : (C) August 28

Protein content of cereals ranges from (a) 8-12% (b) 12-15% (c) 15-20% (d) 20-25%

Description : Protein content of cereals ranges from (a) 8-12% (b) 12-15% (c) 15-20% (d) 20-25%

Last Answer : (a) 8-12%

Formula for average service life of belt at a given speed is a) Life(hrs)= [ Belt length (mm)/ Total fatique rates]*100 b) Life(hrs)=[Total fatique rates / Belt length (mm)]*100 c) Life(hrs)=[Belt length (m)/ Total fatique rates]*100 d) None of the above

Description : Formula for average service life of belt at a given speed is a) Life(hrs)= [ Belt length (mm)/ Total fatique rates]*100 b) Life(hrs)=[Total fatique rates / Belt length (mm)]*100 c) Life(hrs)=[Belt length (m)/ Total fatique rates]*100 d) None of the above

Last Answer : a) Life(hrs)= [ Belt length (mm)/ Total fatique rates]*100

The diameter of very fine sand particles is- (a) Below 0.002 mm (b) 0.05-0.002mm (c) 0.01-0.05 mm (d) 0.05-0.10mm

Description : The diameter of very fine sand particles is- (a) Below 0.002 mm (b) 0.05-0.002mm (c) 0.01-0.05 mm (d) 0.05-0.10mm

Last Answer : (c) 0.01-0.05 mm

The size of clay particles are— (A) 1•0 mm (B) 0•2 – 0•02 mm (C) < 0•02 mm (D) < 0•002 mm

Description : The size of clay particles are— (A) 1•0 mm (B) 0•2 – 0•02 mm (C) < 0•02 mm (D) < 0•002 mm

Last Answer : (D) < 0•002 mm

Match List-I (crops) with List-II (water requirement) and select your answer from the code given below— List-I (a) Jowar (b) Soybean (c) Cotton (d) Groundnut List–II 1. 140 mm – 300 mm 2. 350 mm – 450 mm 3. 200 mm – 300 mm 4. 300 mm – 350 mm Codes : (a) (b) (c) (d) (A) 3 1 2 4 (B) 4 2 3 1 (C) 1 4 2 3 (D) 3 1 4 2

Description : Match List-I (crops) with List-II (water requirement) and select your answer from the code given below- List-I (a) Jowar (b) Soybean (c) Cotton (d) Groundnut List-II 1. 140 mm - 300 mm 2. 350 mm - 450 mm 3. 200 mm - 300 mm 4. 300 mm - ... (b) (c) (d) (A) 3 1 2 4 (B) 4 2 3 1 (C) 1 4 2 3 (D) 3 1 4 2

Last Answer : (C) 1 4 2 3

Generally the gap between the contact breaker points is kept between a) 0 .1 to 0.3 mm b) 0.2 and 0.4 mm c) 0.3 and 0.5 mm d) 0 .4 and 0.6 mm

Description : Generally the gap between the contact breaker points is kept between a) 0 .1 to 0.3 mm b) 0.2 and 0.4 mm c) 0.3 and 0.5 mm d) 0 .4 and 0.6 mm

Last Answer : c) 0.3 and 0.5 mm

Consumptive use of water( mm/ day) in Maize is (a) 1.0- 2.0 (b) 2.0-3.0 (c) 2.5- 4.3 (d) 4.3- 6.0

Description : Consumptive use of water( mm/ day) in Maize is (a) 1.0- 2.0 (b) 2.0-3.0 (c) 2.5- 4.3 (d) 4.3- 6.0

Last Answer : (c) 2.5- 4.3

Water requirement in Maize (a) 400-500mm (b) 600- 800 mm (c) 500- 800 mm (d) 600- 700 mm

Description : Water requirement in Maize (a) 400-500mm (b) 600- 800 mm (c) 500- 800 mm (d) 600- 700 mm

Last Answer : (c) 500- 800 mm

Environment Zone-17 consists of which area ?

Description : Environment Zone-17 consists of which area ?

Last Answer : Environment Zone-17 consists of Bhola Char.

When is National energy conservation day is observed? a. April 16 b. June 5 c. December 16 d. July 5 e. May 17

Description : When is National energy conservation day is observed? a. April 16 b. June 5 c. December 16 d. July 5 e. May 17

Last Answer : c. December 16

Which of the Indian state is called soya state (MPSC mains – 17) (a) Uttar Pradesh (b) Madhya Pradesh (c) Andhra Pradesh (d) Gujarat

Description : Which of the Indian state is called soya state (MPSC mains – 17) (a) Uttar Pradesh (b) Madhya Pradesh (c) Andhra Pradesh (d) Gujarat

Last Answer : (b) Madhya Pradesh

If span is 150 mts and sag is 10 ft of a cable carrying a load of 3200 kg per horizontal metre then tension of ends is a.104,000 kg b.107 dynes c.1200,000 kg d.932,000 kg e.584,000 kg

Description : If span is 150 mts and sag is 10 ft of a cable carrying a load of 3200 kg per horizontal metre then tension of ends is a.104,000 kg b.107 dynes c.1200,000 kg d.932,000 kg e.584,000 kg

Last Answer : d. 932,000 kg

The aggregates required for one kilometre length of water bound macadam road per meter width and for 10 mm thickness is (A) 8 cubic meter (B) 10 cubic meter (C) 12 cubic meter (D) 15 cubic meter

Description : The aggregates required for one kilometre length of water bound macadam road per meter width and for 10 mm thickness is (A) 8 cubic meter (B) 10 cubic meter (C) 12 cubic meter (D) 15 cubic meter

Last Answer : Answer: Option C

From distribution main of 50 mm size, number of service pipes of 15 mm size can be taken off are ------ a) 6 b)10 c) 12 e):20*

Description : From distribution main of 50 mm size, number of service pipes of 15 mm size can be taken off are ------ a) 6 b)10 c) 12 e):20*

Last Answer : e):20*

From distribution main of 40 mm size , number of service pipe of 15 mm size can be taken off are--------- a) 3 b) 6 c) 10 d) 12*

Description : From distribution main of 40 mm size , number of service pipe of 15 mm size can be taken off are--------- a) 3 b) 6 c) 10 d) 12*

Last Answer : d) 12*

Oil-filled cable has a working stress of __________ kV/mm (A) 10 (B) 12 (C) 13 (D) 15

Description : Oil-filled cable has a working stress of __________ kV/mm (A) 10 (B) 12 (C) 13 (D) 15

Last Answer : Ans: D This is defined by dielectric strength of mineral oil i.e. 15 kV/mm.

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50'. What number is missing? -Riddles

Description : 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50'. What number is missing? -Riddles

Last Answer : 22

Find the range of the given data : 25, 18, 20, 22, 16, 6, 17, 15, 12, 30, 32, 10, 19, 8, 11, 20 -Maths 9th

Description : Find the range of the given data : 25, 18, 20, 22, 16, 6, 17, 15, 12, 30, 32, 10, 19, 8, 11, 20 -Maths 9th

Last Answer : Here, the minimum and maximum values of given data are 6 and 32 respectively. Range = 32 – 6 = 26

Find the range of the given data : 25, 18, 20, 22, 16, 6, 17, 15, 12, 30, 32, 10, 19, 8, 11, 20 -Maths 9th

Description : Find the range of the given data : 25, 18, 20, 22, 16, 6, 17, 15, 12, 30, 32, 10, 19, 8, 11, 20 -Maths 9th

Last Answer : Here, the minimum and maximum values of given data are 6 and 32 respectively. Range = 32 – 6 = 26

The range of the data 25, 18, 20, 22, 16, 6, 17, 15, 12, 30, 32, 10, 19, 8, 11 and 20 is -Maths 9th

Description : The range of the data 25, 18, 20, 22, 16, 6, 17, 15, 12, 30, 32, 10, 19, 8, 11 and 20 is -Maths 9th

Last Answer : In conclusion, the range of data 25, 18, 20, 22, 16, 6, 17, 15, 12, 30, 32, 10, 19, 8, 11, and 20 is 26.

The range of the data 25, 18, 20, 22, 16, 6, 17, 15, 12, 30, 32, 10, 19, 8, 11 and 20 is -Maths 9th

Description : The range of the data 25, 18, 20, 22, 16, 6, 17, 15, 12, 30, 32, 10, 19, 8, 11 and 20 is -Maths 9th

Last Answer : (d) In a given data, maximum value = 32 and minimum value = 6 We know, range of the data = maximum value – minimum value = 32 – 6 = 26 Hence, the range of the given data is 26.

Transverse joints are provided at distances varying from (A) 10 m to 15 m (B) 12 m to 18 m (C) 16 m to 24 m (D) 17 m to 27 m

Description : Transverse joints are provided at distances varying from (A) 10 m to 15 m (B) 12 m to 18 m (C) 16 m to 24 m (D) 17 m to 27 m

Last Answer : Answer: Option D

The coefficient of hardness of stones used in road work should be greater than (A) 10 (B) 12 (C) 15 (D) 17

Description : The coefficient of hardness of stones used in road work should be greater than (A) 10 (B) 12 (C) 15 (D) 17

Last Answer : Answer: Option D

What is the size of the longest pencil that can fit in a box with dimensions 12 cm× 10 cm× 8cm? a) 15 b) 15.5 c) 17 d) 17.5 e) 18

Description : What is the size of the longest pencil that can fit in a box with dimensions 12 cm× 10 cm× 8cm? a) 15 b) 15.5 c) 17 d) 17.5 e) 18

Last Answer : Answer: d)

Two pipes fills a tank in 12 hours and 15 hours respectively while a third pipe empties the tank in 18 hours. !f all three pipes operate simultaneously, in what time will the tank be full? a) 10 hours b) 10 10/17 hours c) 11 hours d) 9 hours e) 12 1/17 hours

Description : Two pipes fills a tank in 12 hours and 15 hours respectively while a third pipe empties the tank in 18 hours. !f all three pipes operate simultaneously, in what time will the tank be full? a) 10 hours b) 10 10/17 hours c) 11 hours d) 9 hours e) 12 1/17 hours

Last Answer : b) 10 10/17 hours

The ages of Gaurav and Goutham will be in the ratio 5 : 7 after ten years from now and will be in the ratio 13 : 18 after twelve years from now. Find the ratio of the sum of their ages 10 years hence to the sum of their ages 12 years hence. 1 : 25 : 27 2 : 13 : 15 3 : 14 : 17 4 : 18 : 23 5 : 30 : 31

Description : The ages of Gaurav and Goutham will be in the ratio 5 : 7 after ten years from now and will be in the ratio 13 : 18 after twelve years from now. Find the ratio of the sum of their ages 10 years hence to the sum of their ages 12 ... hence. 1 : 25 : 27 2 : 13 : 15 3 : 14 : 17 4 : 18 : 23 5 : 30 : 31

Last Answer : 5 : 30 : 31

Let A and B be two fuzzy integers defined as: A={(1,0.3), (2,0.6), (3,1), (4,0.7), (5,0.2)} B={(10,0.5), (11,1), (12,0.5)} Using fuzzy arithmetic operation given by Image (A) {(11,0.8), (13,1), (15,1)} (B) {(11,0.3), (12,0.5), (13,1), (14,1), (15,1), (16,0.5), (17,0.2)} (C) {(11,0.3), (12,0.5), (13,0.6), (14,1), (15,1), (16,0.5), (17,0.2)} (D) {(11,0.3), (12,0.5), (13,0.6), (14,1), (15,0.7), (16,0.5), (17,0.2)}

Description : Let A and B be two fuzzy integers defined as: A={(1,0.3), (2,0.6), (3,1), (4,0.7), (5,0.2)} B={(10,0.5), (11,1), (12,0.5)} Using fuzzy arithmetic operation given by (A) {(11,0.8), (13,1), (15,1)} ( ... ,0.2)} (D) {(11,0.3), (12,0.5), (13,0.6), (14,1), (15,0.7), (16,0.5), (17,0.2)}

Last Answer : (D) {(11,0.3), (12,0.5), (13,0.6), (14,1), (15,0.7), (16,0.5), (17,0.2)}

A tank is 1/4th full. Two pipes which fill the tank in 30minutes and 40 minutes respectively are opened simultaneously. After 10 minutes, a third pipe which empties the full tank in 60 minutes is also opened. In how many minutes the tank will be full? A) 14 B) 12 C) 15 D) 17

Description : A tank is 1/4th full. Two pipes which fill the tank in 30minutes and 40 minutes respectively are opened simultaneously. After 10 minutes, a third pipe which empties the full tank in 60 minutes is also opened. In how many minutes the tank will be full? A) 14 B) 12 C) 15 D) 17

Last Answer : A Since 1/4th is already filled, 3/4th is to filled now. (1/30 + 1/40)*(10+x) – (1/60)*x = ¾ 7/120(10+x)-x/60=3/4 7x-2x/120=3/4-7/12 5x/120=1/6 30x=120 X=4 So total 10+4=14minutes

Average power dissipated in resistor if sinusoidal p.d of peak value 25 V is connected across a 20 Ω resistor isA. 15.6 WB. 15 WC. 16 WD. 17 W

Description : Average power dissipated in resistor if sinusoidal p.d of peak value 25 V is connected across a 20 Ω resistor is A. 15.6 W B. 15 W C. 16 W D. 17 W

Last Answer : 15.6 W

Maximum heat dissipation occurs from a steel wire (k = 0.5 W/m. k) of 15 mm diameter exposed to air (h = 20W/m2.k), when the insulation thickness is __________ mm. (A) 15 (B) 25 (C) 10 (D) 30

Description : Maximum heat dissipation occurs from a steel wire (k = 0.5 W/m. k) of 15 mm diameter exposed to air (h = 20W/m2.k), when the insulation thickness is __________ mm. (A) 15 (B) 25 (C) 10 (D) 30

Last Answer : (B) 25

In testing a pile by load test, pile platform is loaded with one and half times the design load and a maximum settlement is noted. The load is gradually removed and the consequent rebound is measured. For a safe pile, the net settlement (i.e. total settlement minus rebound) per tonne of test load should not exceed (A) 10 mm (B) 15 mm (C) 20 mm (D) 25 mm

Description : In testing a pile by load test, pile platform is loaded with one and half times the design load and a maximum settlement is noted. The load is gradually removed and the consequent rebound is measured. For a safe pile, the net ... load should not exceed (A) 10 mm (B) 15 mm (C) 20 mm (D) 25 mm

Last Answer : Answer: Option D

The maximum permissible size of aggregates to be used in casting the ribs of a slab, is (A) 5 mm (B) 7.5 mm (C) 10 mm (D) 15 mm

Description : The maximum permissible size of aggregates to be used in casting the ribs of a slab, is (A) 5 mm (B) 7.5 mm (C) 10 mm (D) 15 mm

Last Answer : Answer: Option C

If a cable of homogeneous insulation has a maximum stress of 10 kV/mm, then the dielectric strength of insulation should be (a) 5 kV/mm (b) 10 kV/mm (a) 15 kV/mm (d) 30 kV/mm

Description : If a cable of homogeneous insulation has a maximum stress of 10 kV/mm, then the dielectric strength of insulation should be (a) 5 kV/mm (b) 10 kV/mm (a) 15 kV/mm (d) 30 kV/mm

Last Answer : (b) 10 kV/mm