Which Ethernet system is restricted only to 100 m? A. 10 Base T B. 20 Base 2 C. 10 Base 5 D. 10 Base 1

Which Ethernet system is restricted only to 100 m?
A. 10 Base T
B. 20 Base 2
C. 10 Base 5
D. 10 Base 1
by

1 Answer

Answer :

A. 10 Base T
by

Related questions

Ethernet is baseband system using CSMA/CD operating at A. 20 Mbps B. 10 Mbps C. 30 Mbps D. 40 Mbps

Description : Ethernet is baseband system using CSMA/CD operating at A. 20 Mbps B. 10 Mbps C. 30 Mbps D. 40 Mbps

Last Answer : B. 10 Mbps

is the predominant form of Fast Ethernet, and runs over two pairs of category 5 or above cable. a. 100 BASE-T b. 100 BASE-TX c. 100 BASE-T4 d. 100 BASE-T2

Description : is the predominant form of Fast Ethernet, and runs over two pairs of category 5 or above cable. a. 100 BASE-T b. 100 BASE-TX c. 100 BASE-T4 d. 100 BASE-T2

Last Answer : b. 100 BASE-TX

.......... is the predominant form of Fast Ethernet, and runs over two pairs of category 5 or above cable. A) 100 BASE-T B) 100 BASE-TX C) 100 BASE-T4

Description : .......... is the predominant form of Fast Ethernet, and runs over two pairs of category 5 or above cable. A) 100 BASE-T B) 100 BASE-TX C) 100 BASE-T4

Last Answer : B) 100 BASE-TX

s the predominant form of Fast Ethernet, and runs over two pairs of category 5 or above cable. A) 100 BASE-T B) 100 BASE-TX C) 100 BASE-T4 D) 100 BASE-T2

Description : s the predominant form of Fast Ethernet, and runs over two pairs of category 5 or above cable. A) 100 BASE-T B) 100 BASE-TX C) 100 BASE-T4 D) 100 BASE-T2

Last Answer : B) 100 BASE-TX

IEEE 802.3ab defines Gigabit Ethernet transmission over unshieldedtwisted pair (UTP) category 5, 5e or 6 cabling known as .................... a. 1000 BASE-T b. 1000 BASE-SX c. 1000 BASE-LX d. 1000 BASE-CX

Description : IEEE 802.3ab defines Gigabit Ethernet transmission over unshielded twisted pair (UTP) category 5, 5e or 6 cabling known as .................... a. 1000 BASE-T b. 1000 BASE-SX c. 1000 BASE-LX d. 1000 BASE-CX

Last Answer : a. 1000 BASE-T

IEEE 802.3ab defines Gigabit Ethernet transmission over unshielded twisted pair (UTP) category 5, 5e or 6 cabling known as .................... A) 1000 BASE-T B) 1000 BASE-SX C) 1000 BASE-LX D) 1000 BASE-CX

Description : IEEE 802.3ab defines Gigabit Ethernet transmission over unshielded twisted pair (UTP) category 5, 5e or 6 cabling known as .................... A) 1000 BASE-T B) 1000 BASE-SX C) 1000 BASE-LX D) 1000 BASE-CX

Last Answer : A) 1000 BASE-T

IEEE 802.3ab defines Gigabit Ethernet transmission over unshielded twisted pair (UTP) category 5, 5e or 6 cabling known as .................... A) 1000 BASE-T B) 1000 BASE-SX C) 1000 BASE-LX D) 1000 BASE-CX

Description : IEEE 802.3ab defines Gigabit Ethernet transmission over unshielded twisted pair (UTP) category 5, 5e or 6 cabling known as .................... A) 1000 BASE-T B) 1000 BASE-SX C) 1000 BASE-LX D) 1000 BASE-CX

Last Answer : A) 1000 BASE-T

If 4 kW in antenna produces 50 μV/m in a receiving antenna, a 15 kW will produce _____. A. 200 μV/m B. 10 μV/m C. 100 μV/m D. 20 μV/m

Description : If 4 kW in antenna produces 50 μV/m in a receiving antenna, a 15 kW will produce _____. A. 200 μV/m B. 10 μV/m C. 100 μV/m D. 20 μV/m

Last Answer : C. 100 μV/m

In a fast Ethernet cabling, 100 Base-TX uses ........... cable and maximum segment size is ............ (A) twisted pair, 100 metres (B) twisted pair, 200 metres (C) fibre optics, 1000 metres (D) fibre optics, 2000 metres

Description : In a fast Ethernet cabling, 100 Base-TX uses ........... cable and maximum segment size is ............ (A) twisted pair, 100 metres (B) twisted pair, 200 metres (C) fibre optics, 1000 metres (D) fibre optics, 2000 metres

Last Answer : (A) twisted pair, 100 metres

Slowest communications hardware product. A. Synchronous B. Asynchronous C. Ethernet D. Internet

Description : Slowest communications hardware product. A. Synchronous B. Asynchronous C. Ethernet D. Internet

Last Answer : B. Asynchronous

The width of the entrances of the harbours is restricted to (A) 100 m (B) 125 m (C) 150 m (D) 180 m

Description : The width of the entrances of the harbours is restricted to (A) 100 m (B) 125 m (C) 150 m (D) 180 m

Last Answer : (D) 180 m

The noise from an airplane engine 100 ft from an observer is found to have an intensity of 45dB. What will be the intensity when the plane flies overhead at an altitude of 1 mi? A. 10.5 dB B. 34.5 dB C. 35 dB D. 20.5 dB

Description : The noise from an airplane engine 100 ft from an observer is found to have an intensity of 45dB. What will be the intensity when the plane flies overhead at an altitude of 1 mi? A. 10.5 dB B. 34.5 dB C. 35 dB D. 20.5 dB

Last Answer : A. 10.5 dB

Ethernet 10 Base 2 is an example of ______network topology. (A) Bus (B) Ring (C) Star (D) Mesh

Description : Ethernet 10 Base 2 is an example of ______network topology. (A) Bus (B) Ring (C) Star (D) Mesh

Last Answer : (A) Bus

What is the front-to-back ratio of an antenna which radiates 500 watts in a northernly direction and 50 watts in a southernly direction? A. 25000 dB B. 10 dB C. 100 dB D. 20 dB

Description : What is the front-to-back ratio of an antenna which radiates 500 watts in a northernly direction and 50 watts in a southernly direction? A. 25000 dB B. 10 dB C. 100 dB D. 20 dB

Last Answer : B. 10 dB

In sea, plants are restricted up to the depth of – (1) 20 m (2) 200 m (3) 1000 m (4) 2000 m

Description : In sea, plants are restricted up to the depth of – (1) 20 m (2) 200 m (3) 1000 m (4) 2000 m

Last Answer : (2) 200 m Explanation: In sea, vegetations are found upto the depth of 200 m.

In sea, plants are restricted up to the depth of (1) 20 m (2) 200 m (3) 1000 m (4) 2000 m

Description : In sea, plants are restricted up to the depth of (1) 20 m (2) 200 m (3) 1000 m (4) 2000 m 

Last Answer : 200 m

In cellular system, the average lead time to install a new base station is approximately ____ months to a year. A. 4 B. 5 C. 6 D. 10

Description : In cellular system, the average lead time to install a new base station is approximately ____ months to a year. A. 4 B. 5 C. 6 D. 10

Last Answer : C. 6

Gigabit Ethernet has a datarate of________Mbps. A) 10 B) 100 C) 1000 D) 10,000

Description : Gigabit Ethernet has a datarate of________Mbps. A) 10 B) 100 C) 1000 D) 10,000

Last Answer : 1000

Fast Ethernet hasa data rate of ________Mbps. A) 10 B) 100 C) 1000 D) 10,000

Description : Fast Ethernet hasa data rate of ________Mbps. A) 10 B) 100 C) 1000 D) 10,000

Last Answer : 100

Hooking up a hard drive to the Ethernet port of my Airport Extreme base station.

Description : Hooking up a hard drive to the Ethernet port of my Airport Extreme base station.

Last Answer : What do you mean by a “Network hard drive?” Are you talking about an external NAS drive with its own built in Ethernet port? If so, you should be able to connect it to one of the Ethernet ports on th back of the airport.

What is the propagation velocity of a signal in a transmission line whose inductance and capacitance are 5μH/m and 20μF/m respectively? A. 100x103 m/s B. 100 m/s C. 10x103 m/s D. 100x106 m/s

Description : What is the propagation velocity of a signal in a transmission line whose inductance and capacitance are 5μH/m and 20μF/m respectively? A. 100x103 m/s B. 100 m/s C. 10x103 m/s D. 100x106 m/s

Last Answer : A. 100x103 m/s

The total space loss of transmission and reception for two ground stations with uplink frequency 8GHz and a downlink of 6 GHz with angle of elevations of 3˚ and 7˚ A respectively is A. 403 dB B. 100 dB C. 20 dB D. 215 dB

Description : The total space loss of transmission and reception for two ground stations with uplink frequency 8GHz and a downlink of 6 GHz with angle of elevations of 3˚ and 7˚ A respectively is A. 403 dB B. 100 dB C. 20 dB D. 215 dB

Last Answer : A. 403 dB

1. Assume that there are only two goods: A and B In the base year, Quantity Price A 10 $1 B 10 $4 In the current year, Quantity Price A 20 $ 5 B 25 $20 The Consumer Price Index (CPI) for the current year is: a. 50 b. 100 c. 200 d. 500 e. 60

Description : 1. Assume that there are only two goods: A and B In the base year, Quantity Price A 10 $1 B 10 $4 In the current year, Quantity Price A 20 $ 5 B 25 $20 The Consumer Price Index (CPI) for the current year is: a. 50 b. 100 c. 200 d. 500 e. 60

Last Answer : d. 500

What is the baud rate of the standard 10 Mbps Ethernet ? (A) 10 megabaud (B) 20 megabaud (C) 30 megabaud (D) 40 megabaud

Description : What is the baud rate of the standard 10 Mbps Ethernet ? (A) 10 megabaud (B) 20 megabaud (C) 30 megabaud (D) 40 megabaud

Last Answer : (B) 20 megabaud

What mathematical plane figure is ideal in cellular system design and engineering it graphically and functionally depicts overlapping radio coverage between and among adjacent cell base stations? A. Hexagon B. Octagon C. Pentagon D. Nonagon

Description : What mathematical plane figure is ideal in cellular system design and engineering it graphically and functionally depicts overlapping radio coverage between and among adjacent cell base stations? A. Hexagon B. Octagon C. Pentagon D. Nonagon

Last Answer : A. Hexagon

One of the following is not among the major components required on board ship under the global maritime distress and safety system. A. On board radio facilities B. Radio operator telegraphy onboard C. Shore base facilities D. Radio personnel on board

Description : One of the following is not among the major components required on board ship under the global maritime distress and safety system. A. On board radio facilities B. Radio operator telegraphy onboard C. Shore base facilities D. Radio personnel on board

Last Answer : B. Radio operator telegraphy onboard

Suppose that the one-way propagation delay for a 100 Mbps Ethernet having 48-bit jamming signal is 1.04 micro-seconds. The minimum frame size in bits is: a. 112 b. 160 c. 208 d. 256

Description : Suppose that the one-way propagation delay for a 100 Mbps Ethernet having 48-bit jamming signal is 1.04 micro-seconds. The minimum frame size in bits is: a. 112 b. 160 c. 208 d. 256

Last Answer : d. 256

The maximum length of a "thick" Ethernet cable is ……….. A. 100 meters B. 200 meters C. 500 meters D. 1000meters

Description : The maximum length of a "thick" Ethernet cable is ……….. A. 100 meters B. 200 meters C. 500 meters D. 1000meters

Last Answer : C. 500 meters

What is the effective radiated power of a repeater with 100 watts transmitter power output, 5 dB feedline loss, 4 dB duplexer and circulator loss, and 10 dB antenna gain? A. 800 W B. 126 W C. 12.5 W D. 1260 W

Description : What is the effective radiated power of a repeater with 100 watts transmitter power output, 5 dB feedline loss, 4 dB duplexer and circulator loss, and 10 dB antenna gain? A. 800 W B. 126 W C. 12.5 W D. 1260 W

Last Answer : B. 126 W

Ho w many times bigger does the bandwidth of a fiber optic multimode have over a cable? A. 50 times bigger B. 100 times bigger C. 10 times bigger D. 5 times bigger

Description : Ho w many times bigger does the bandwidth of a fiber optic multimode have over a cable? A. 50 times bigger B. 100 times bigger C. 10 times bigger D. 5 times bigger

Last Answer : B. 100 times bigger

A microwave communications system space loss calculation formula is A. 92.4 + 10 log f +20 log d B. 94.2 + 10 log f +20 log d C. 92.4 + 20 log f +20 log d D. 94.2 + 20 log f +20 log d

Description : A microwave communications system space loss calculation formula is A. 92.4 + 10 log f +20 log d B. 94.2 + 10 log f +20 log d C. 92.4 + 20 log f +20 log d D. 94.2 + 20 log f +20 log d

Last Answer : C. 92.4 + 20 log f +20 log d

Consider an array A[20, 10], assume 4 words per memory cell and the base address of array A is 100. What is the address of A[11, 5] ? Assume row major storage. (A) 560 (B) 565 (C) 570 (D) 575

Description : Consider an array A[20, 10], assume 4 words per memory cell and the base address of array A is 100. What is the address of A[11, 5] ? Assume row major storage. (A) 560 (B) 565 (C) 570 (D) 575

Last Answer : (A) 560

In t-carrier system, t3 has a bit rate of A. 560.160 Mbps B. 44.376 Mbps C. 44.736 Mbps D. 560.106 Mbps

Description : In t-carrier system, t3 has a bit rate of A. 560.160 Mbps B. 44.376 Mbps C. 44.736 Mbps D. 560.106 Mbps

Last Answer : C. 44.736 Mbps

____ system transmits frequency-division-multiplexed voice band signals over a coaxial cable for distances up to 4000 miles. A. T carrier B. X carrier C. L carrier D. F carrier

Description : ____ system transmits frequency-division-multiplexed voice band signals over a coaxial cable for distances up to 4000 miles. A. T carrier B. X carrier C. L carrier D. F carrier

Last Answer : C. L carrier

What is the gain, in dB of a helical antenna with diameter of λ/3, 10 turns at pitch of λ/4, used at 100 MHz? A. 16 B. 41.1 C. 31.4 D. 1.25

Description : What is the gain, in dB of a helical antenna with diameter of λ/3, 10 turns at pitch of λ/4, used at 100 MHz? A. 16 B. 41.1 C. 31.4 D. 1.25

Last Answer : A. 16

What is the gain of isotropic antenna? A. 10 B. 1 C. 10 D. 100

Description : What is the gain of isotropic antenna? A. 10 B. 1 C. 10 D. 100

Last Answer : B. 1

If an antenna has a gain of 3 dB, it increases the output of the transmitter by A. 10,000 times B. 1000 times C. 100 times D. 1 million times

Description : If an antenna has a gain of 3 dB, it increases the output of the transmitter by A. 10,000 times B. 1000 times C. 100 times D. 1 million times

Last Answer : B. 1000 times

For a space wave transmission, the radio horizon distance of a transmitting antenna with a height of 100 meters is approximately:A. 10 km B. 40 km C. 100 km D. 400 km

Description : For a space wave transmission, the radio horizon distance of a transmitting antenna with a height of 100 meters is approximately: A. 10 km B. 40 km C. 100 km D. 400 km

Last Answer : B. 40 km

The range of speech power is ____. A. 1 – 10 watts B. 100 – 1000 milliwatts C. 10 – 100 milliwatts D. 10 – 1000 microwatts

Description : The range of speech power is ____. A. 1 – 10 watts B. 100 – 1000 milliwatts C. 10 – 100 milliwatts D. 10 – 1000 microwatts

Last Answer : 10 – 1000 microwatts

What is the phase coefficient in radians per unit length of a transmission line at the frequency of 10 MHz if the velocity of propagation is 2.5x108 m/s? A. 0.25 B. 2.5 C. 0.35 D. 3.5

Description : What is the phase coefficient in radians per unit length of a transmission line at the frequency of 10 MHz if the velocity of propagation is 2.5x108 m/s? A. 0.25 B. 2.5 C. 0.35 D. 3.5

Last Answer : A. 0.25

A properly matched transmission line has a loss of 1.5 dB/100m. if 10 W is supplied to one end of the line, how many watts reach the load, 27 m away? A. 10 W B. 7.2 W C. 9.9 W D. 9.1 W

Description : A properly matched transmission line has a loss of 1.5 dB/100m. if 10 W is supplied to one end of the line, how many watts reach the load, 27 m away? A. 10 W B. 7.2 W C. 9.9 W D. 9.1 W

Last Answer : D. 9.1 W

The current maximum in a Marconi antenna is found at A. the base of the antenna B. the center of the antenna C. some point between the base and the center of the antenna D. the top of the antenna

Description : The current maximum in a Marconi antenna is found at A. the base of the antenna B. the center of the antenna C. some point between the base and the center of the antenna D. the top of the antenna

Last Answer : A. the base of the antenna

Which of the following systems uses frequency band 870-885 MHz as a transmit band of its base station? A. TACS B. NTT C. NMT D. AMPS

Description : Which of the following systems uses frequency band 870-885 MHz as a transmit band of its base station? A. TACS B. NTT C. NMT D. AMPS

Last Answer : B. NTT

Referred by radio regulation as the station in the mobile service not intended to be used while in motion. A. Fixed station B. Base station C. Land station D. Coast station

Description : Referred by radio regulation as the station in the mobile service not intended to be used while in motion. A. Fixed station B. Base station C. Land station D. Coast station

Last Answer : C. Land station

A radio land station in the land mobile service A. Mobile station B. Land station C. Base station D. Ship earth station

Description : A radio land station in the land mobile service A. Mobile station B. Land station C. Base station D. Ship earth station

Last Answer : C. Base station

Station in the mobile service not intended to be used while in motion. A. Coast station B. Fixed station C. Base station D. Land station

Description : Station in the mobile service not intended to be used while in motion. A. Coast station B. Fixed station C. Base station D. Land station

Last Answer : D. Land station

Designates the sensation of low or high in the sense of the base and treble. A. Frequency B. Intensity C. Pitch D. SPL

Description : Designates the sensation of low or high in the sense of the base and treble. A. Frequency B. Intensity C. Pitch D. SPL

Last Answer : C. Pitch

What would happen if the base resistor has zero resistance?

Description : What would happen if the base resistor has zero resistance?

Last Answer : If the base resistance is zero, then the base current is very high. Since, we know that the base current is directly proportional to the collector current with the multiplying factor of current ... high. In this time, the transistor operates in saturation region and finally it is being destroyed.

Key point for its proper functioning of base region in a transistor depends upon the thickness of the base Why ?

Description : Key point for its proper functioning of base region in a transistor depends upon the thickness of the base Why ?

Last Answer : Base region in a transistor controls the current. The majority charge carriers supplied by the emitter do not combine in the same region due to its thin size and light doping and most of them pass on to the collector. This is the key point for its proper functioning.

What would happen if the base resistor has zero resistance?

Description : What would happen if the base resistor has zero resistance?

Last Answer : If the base resistance is zero, then the base current is very high. Since, we know that the base current is directly proportional to the collector current with the multiplying factor of current ... high. In this time, the transistor operates in saturation region and finally it is being destroyed.