If the width of the foundation for two equal columns is restricted, the shape of the footing generally adopted, is (A) Square (B) Rectangular (C) Trapezoidal (D) Triangular

If the width of the foundation for two equal columns is restricted, the shape of the footing
generally adopted, is
(A) Square
(B) Rectangular
(C) Trapezoidal
(D) Triangular
by

1 Answer

Answer :

Answer: Option B
by

Related questions

Pick up the correct statement from the following: (A) A combined footing is so proportioned that centre of gravity of supporting area coincides with centre of gravity of two column loads (B) A combined footing may be either rectangular or trapezoidal in shape (C) Trapezoidal shaped footings may be provided under any loading (D) All the above

Description : Pick up the correct statement from the following: (A) A combined footing is so proportioned that centre of gravity of supporting area coincides with centre of gravity of two column loads (B) A ... in shape (C) Trapezoidal shaped footings may be provided under any loading (D) All the above

Last Answer : Answer: Option D

The most efficient section of a channel is (A) Triangular (B) Rectangular (C) Square (D) Trapezoidal

Description : The most efficient section of a channel is (A) Triangular (B) Rectangular (C) Square (D) Trapezoidal

Last Answer : Answer: Option D

The discharge over the trapezoidal notch is equal to the discharge over the rectangular notch __________ the discharge over the triangular notch. (A) Plus (B) Minus (C) Divide (D) None of these

Description : The discharge over the trapezoidal notch is equal to the discharge over the rectangular notch __________ the discharge over the triangular notch. (A) Plus (B) Minus (C) Divide (D) None of these

Last Answer : Answer: Option A

A weir is used to measure the large water discharge rate from a river or from an open channel. A weir is not of __________ shape. (A) Circular (B) Rectangular (C) Triangular (D) Trapezoidal

Description : A weir is used to measure the large water discharge rate from a river or from an open channel. A weir is not of __________ shape. (A) Circular (B) Rectangular (C) Triangular (D) Trapezoidal

Last Answer : (A) Circular

The Cipoletti weir is a __________ weir. (A) Rectangular (B) Triangular (C) Trapezoidal (D) Circular

Description : The Cipoletti weir is a __________ weir. (A) Rectangular (B) Triangular (C) Trapezoidal (D) Circular

Last Answer : Answer: Option C

cutter bar knife a) triangular shape b) square shape c) trapezoidal shape d) curved shape Ans. c

Description : cutter bar knife a) triangular shape b) square shape c) trapezoidal shape d) curved shape Ans. c

Last Answer : ans c

For a number of columns constructed in a rcjw, the type of foundation provided, is (A) Footing (B) Raft (C) Strap (D) Strip

Description : For a number of columns constructed in a rcjw, the type of foundation provided, is (A) Footing (B) Raft (C) Strap (D) Strip

Last Answer : Answer: Option D

The type of footing which is used to transmit heavy loads through steel columns is (A) Raft foundation (B) Grillage foundation (C) Well foundation (D) Isolated footing

Description : The type of footing which is used to transmit heavy loads through steel columns is (A) Raft foundation (B) Grillage foundation (C) Well foundation (D) Isolated footing

Last Answer : Option B

A furrow cross-section in a country plough is commonly a) Circular b) Triangular c) Rectangular d) Trapezoidal

Description : A furrow cross-section in a country plough is commonly a) Circular b) Triangular c) Rectangular d) Trapezoidal

Last Answer : ans b

The highest efficiency is obtained with a channel of __________ section. (A) Circular (B) Square (C) Rectangular (D) Trapezoidal

Description : The highest efficiency is obtained with a channel of __________ section. (A) Circular (B) Square (C) Rectangular (D) Trapezoidal

Last Answer : Answer: Option D

To support a heavy structure in sandy soil, the type of foundation generally used, is (A) Combined footing (B) Raft footing (C) Pier footing (D) Strap footing

Description : To support a heavy structure in sandy soil, the type of foundation generally used, is (A) Combined footing (B) Raft footing (C) Pier footing (D) Strap footing

Last Answer : Answer: Option C

In soils possessing low bearing capacity, the type of foundation generally provided, is (A) Column footing (B) Grillage footing (C) Raft footing (D) All the above

Description : In soils possessing low bearing capacity, the type of foundation generally provided, is (A) Column footing (B) Grillage footing (C) Raft footing (D) All the above

Last Answer : Option D

For the same height, the bottom width for no tension, (A) For triangular section is more than rectangular section (B) For rectangular section is more than triangular section (C) For triangular section is same as that of a rectangular section (D) None of these

Description : For the same height, the bottom width for no tension,  (A) For triangular section is more than rectangular section  (B) For rectangular section is more than triangular section  (C) For triangular section is same as that of a rectangular section  (D) None of these 

Last Answer : (C) For triangular section is same as that of a rectangular section 

A mono-block sleeper has A. Square section B. Rectangular section C. Trapezoidal section D. None of These

Description : A mono-block sleeper has A. Square section B. Rectangular section C. Trapezoidal section D. None of These

Last Answer : C [Trapezoidal section]

The discharge through a channel of trapezoidal section is maximum when (A) Width of channel at the top is equal to twice the width at the bottom (B) Depth of channel is equal to the width at the bottom (C) The sloping side is equal to half the width at the top (D) The sloping side is equal to the width at the bottom

Description : The discharge through a channel of trapezoidal section is maximum when (A) Width of channel at the top is equal to twice the width at the bottom (B) Depth of channel is equal to the width at the bottom ... equal to half the width at the top (D) The sloping side is equal to the width at the bottom

Last Answer : Answer: Option C

For a rectangular foundation of width b, eccentricity of load should not exceed (A) b/2 (B) b/3 (C) b/4 (D) b/6

Description : For a rectangular foundation of width b, eccentricity of load should not exceed (A) b/2 (B) b/3 (C) b/4 (D) b/6

Last Answer : For a rectangular foundation of width b, eccentricity of load should not exceed (A) b/2 (B) b/3 (C) b/4 (D) b/6

Raft foundation are generally preferred to when the area required for individual footing, is more than (A) 25% to total area (B) 30% of total area (C) 40% to total area (D) 50% of total area

Description : Raft foundation are generally preferred to when the area required for individual footing, is more than (A) 25% to total area (B) 30% of total area (C) 40% to total area (D) 50% of total area

Last Answer : Option D

Pick up the correct statement from the following: (A) The throat of the section of a control meter is either rectangular or trapezoidal (B) The floor of the control meter throat is almost level (C) The floor of the expanding outlet of the control meter is given a steep slope (D) All the above

Description : Pick up the correct statement from the following: (A) The throat of the section of a control meter is either rectangular or trapezoidal (B) The floor of the control meter throat is almost level (C) The floor of the expanding outlet of the control meter is given a steep slope (D) All the above

Last Answer : Answer: Option D

In rectangular columns (cross-section b × h), the core is a (A) Rectangle of lengths b/2 and h/2 (B) Square of length b/2 (C) Rhombus of length h/2 (D) Rhombus of diagonals b/3 and h/3

Description : In rectangular columns (cross-section b × h), the core is a  (A) Rectangle of lengths b/2 and h/2  (B) Square of length b/2  (C) Rhombus of length h/2  (D) Rhombus of diagonals b/3 and h/3 

Last Answer : (D) Rhombus of diagonals b/3 and h/3 

In case of Imhoff tanks, A. The shape is rectangular B. Detention period is 2 hours C. The velocity of flow is restricted to 0.30 m/minute D. All the above

Description : In case of Imhoff tanks, A. The shape is rectangular B. Detention period is 2 hours C. The velocity of flow is restricted to 0.30 m/minute D. All the above

Last Answer : ANS: D

The cell is usually ____ in shape. • Triangular • Circular • Rectangular • Cylindrical

Description : The cell is usually ____ in shape. • Triangular • Circular • Rectangular • Cylindrical

Last Answer : • Cylindrical

In a combined footing for two columns carrying unequal loads, the maximum hogging bending moment occurs at (A) Less loaded column (B) More loaded column (C) A point of the maximum shear force (D) A point of zero shear force

Description : In a combined footing for two columns carrying unequal loads, the maximum hogging bending moment occurs at (A) Less loaded column (B) More loaded column (C) A point of the maximum shear force (D) A point of zero shear force

Last Answer : Answer: Option D

If the length of a combined footing for two columns l metres apart is L and the projection on the left side of the exterior column is x, then the projection y on the right side of the exterior column, in order to have a uniformly distributed load, is (where is the distance of centre of gravity of column loads). (A) y = L - (l - ) (B) y = L/2 + (l - ) (C) y = L/2 - (l + ) (D) y = L/2 - (l - )

Description : If the length of a combined footing for two columns l metres apart is L and the projection on the left side of the exterior column is x, then the projection y on the right side of the exterior column, in order to have a uniformly distributed ... l - ) (C) y = L/2 - (l + ) (D) y = L/2 - (l - )

Last Answer : Answer: Option D

Top bars are extended to the projecting parts of the combined footing of two columns Ldistance apart for a distance of (A) 0.1 L from the outer edge of column (B) 0.1 L from the centre edge of column (C) Half the distance of projection (D) One-fourth the distance of projection

Description : Top bars are extended to the projecting parts of the combined footing of two columns Ldistance apart for a distance of (A) 0.1 L from the outer edge of column (B) 0.1 L from the centre edge of column (C) Half the distance of projection (D) One-fourth the distance of projection

Last Answer : Answer: Option B

Bottom bars under the columns are extended into the interior of the footing slab to a distance greater than (A) 42 diameters from the centre of the column (B) 42 diameters from the inner edge of the column (C) 42 diameters from the outer edge of the column (D) 24 diameters from the centre of the column

Description : Bottom bars under the columns are extended into the interior of the footing slab to a distance greater than (A) 42 diameters from the centre of the column (B) 42 diameters from the inner edge of ... ) 42 diameters from the outer edge of the column (D) 24 diameters from the centre of the column

Last Answer : Answer: Option C

The foundation in which a cantilever beam is provided to join two footings, is known as (A) Strip footing (B) Strap footing (C) Combined footing (D) Raft footing

Description : The foundation in which a cantilever beam is provided to join two footings, is known as (A) Strip footing (B) Strap footing (C) Combined footing (D) Raft footing

Last Answer : Answer: Option B

If P kg/m2 is the upward pressure on the slab of a plain concrete footing whose projection on either side of the wall is a cm, the depth of foundation D is given by (A) D = 0.00775 aP (B) D = 0.0775 aP (C) D = 0.07775 aP (D) D = 0.775 Pa

Description : If P kg/m2 is the upward pressure on the slab of a plain concrete footing whose projection on either side of the wall is a cm, the depth of foundation D is given by (A) D = 0.00775 aP (B) D = 0.0775 aP (C) D = 0.07775 aP (D) D = 0.775 Pa

Last Answer : Answer: Option A

For the construction of flyovers in sandy soils, the type of foundation provided, is (A) Strap footing (B) Raft footing (C) Combined footing (D) Pier footing

Description : For the construction of flyovers in sandy soils, the type of foundation provided, is (A) Strap footing (B) Raft footing (C) Combined footing (D) Pier footing

Last Answer : Answer: Option D

The depth of concrete bed of the foundation depends upon (A) The projection of the concrete block beyond the footing over it (B) The upward soil pressure (C) The mix of the concrete (D) All the above

Description : The depth of concrete bed of the foundation depends upon (A) The projection of the concrete block beyond the footing over it (B) The upward soil pressure (C) The mix of the concrete (D) All the above

Last Answer : Answer: Option D

Consider the following statements: 1. The benefit of surcharge and depth of foundation is only marginal in case of footings on purely cohesive soils. 2. The bearing capacity of a footing in pure clay increases with increase in size of the footing. 3. Size effects in plate load tests are more important in case of cohesionless soils. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements: 1. The benefit of surcharge and depth of foundation is only marginal in case of footings on purely cohesive soils. 2. The bearing capacity of a footing in pure clay increases with increase in size of the ... , 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (d) 1 & 3 only

The section modulus of a rectangular section is proportional to (A) Area of the section (B) Square of the area of the section (C) Product of the area and depth (D) Product of the area and width

Description : The section modulus of a rectangular section is proportional to  (A) Area of the section  (B) Square of the area of the section  (C) Product of the area and depth  (D) Product of the area and width

Last Answer : (A) Area of the section

Plug weld is a. Rectangular b. Square c. Triangular d. None

Description : Plug weld is a. Rectangular b. Square c. Triangular d. None

Last Answer : d. None

Fillet weld is a a. Square b. Rectangular c. Triangular d. None

Description : Fillet weld is a a. Square b. Rectangular c. Triangular d. None

Last Answer : c. Triangular

Lap welded joints are a. Rectangular b. Square c. Triangular d. None

Description : Lap welded joints are a. Rectangular b. Square c. Triangular d. None

Last Answer : c. Triangular

Which method of planting is most suitable for Tea crop ? a. Square b. Triangular c. Contour d. Rectangular

Description : Which method of planting is most suitable for Tea crop ? a. Square b. Triangular c. Contour d. Rectangular

Last Answer : b. Triangular

The pattern of NaCl particles have a: a) Triangular b) Square c) Cubic d) Rectangular

Description : The pattern of NaCl particles have a: a) Triangular b) Square c) Cubic d) Rectangular

Last Answer : c) Cubic

The portion of the brick without a triangular corner equal to half the width and half the length, is called (A) Closer (B) Queen closer (C) King closer (D) Squint brick

Description : The portion of the brick without a triangular corner equal to half the width and half the length, is called (A) Closer (B) Queen closer (C) King closer (D) Squint brick

Last Answer : Answer: Option C

The shape of docks and basins is generally kept (A) Rectangular ways (B) Diamond shape guys (C) Inclined guys (D) All of these

Description : The shape of docks and basins is generally kept (A) Rectangular ways (B) Diamond shape guys (C) Inclined guys (D) All of these

Last Answer : (D) All of these

A foundation is called shallow if its depth, is (A) One-fourth of its width (B) Half of its width (C) Three-fourth of its width (D) Equal to its width

Description : A foundation is called shallow if its depth, is (A) One-fourth of its width (B) Half of its width (C) Three-fourth of its width (D) Equal to its width

Last Answer : Answer: Option D

A T-beam behaves as a rectangular beam of a width equal to its flange if its neutral axis (A) Remains within the flange (B) Remains below the slab (C) Coincides the geometrical centre of the beam (D) None of these

Description : A T-beam behaves as a rectangular beam of a width equal to its flange if its neutral axis (A) Remains within the flange (B) Remains below the slab (C) Coincides the geometrical centre of the beam (D) None of these

Last Answer : Answer: Option A

A cupboard in the shape of a rectangular prism has a length of 5 feet, a width of 3 feet, and a height of 7 feet. What is the volume of the cupboard?

Description : A cupboard in the shape of a rectangular prism has a length of 5 feet, a width of 3 feet, and a height of 7 feet. What is the volume of the cupboard?

Last Answer : 68

Select the incorrect statement. (A) Bearing capacity of a soil depends upon the amount and direction of load (B) Bearing capacity of a soil depends on the type of soil (C) Bearing capacity of a soil depends upon shape and size of footing (D) Bearing capacity of a soil is independent of rate of loading

Description : Select the incorrect statement. (A) Bearing capacity of a soil depends upon the amount and direction of load (B) Bearing capacity of a soil depends on the type of soil (C) Bearing capacity of a ... upon shape and size of footing (D) Bearing capacity of a soil is independent of rate of loading

Last Answer : Answer: Option A

Adopted planting system of orchard in Pakistan is: a. Square system b. Rectangular system c. Hexagonal system d. All of above

Description : Adopted planting system of orchard in Pakistan is: a. Square system b. Rectangular system c. Hexagonal system d. All of above

Last Answer : Square system

The foundation which consists of a thick reinforced cement slab covering whole area to support heavy concentrated structural loads, is known as (A) Combined footing (B) Strap footing (C) Raft footing (D) None of these

Description : The foundation which consists of a thick reinforced cement slab covering whole area to support heavy concentrated structural loads, is known as (A) Combined footing (B) Strap footing (C) Raft footing (D) None of these

Last Answer : Option C

State the necessity of providing (i) Combined column footing and (ii) Raft foundation

Description : State the necessity of providing (i) Combined column footing and (ii) Raft foundation

Last Answer : (i) Combined column footing:- A combined footing provided as a column for two or more columns in a row. Combine footing is also provided when the columns are very near to each other and ... total individual footing area of all columns exceeds 50% of built up area of building at ground floor.

what- sam has 15 identical rectangular windows in his home. The length of each window is twice the width, and the area of each window is 8 square feet. Sam wants to ...?

Description : what- sam has 15 identical rectangular windows in his home. The length of each window is twice the width, and the area of each window is 8 square feet. Sam wants to ...?

Last Answer : 45

what- the length of a rectangular carpet is 2 times its width. The area of the carpet is 128 square feet.What is the length of the carpet?

Description : what- the length of a rectangular carpet is 2 times its width. The area of the carpet is 128 square feet.What is the length of the carpet?

Last Answer : 16 ft.

What Rectangular pool has an area of 192 square feet. The length of the pool is 15 feet. What is the pool and width rounded to the nearest foot?

Description : What Rectangular pool has an area of 192 square feet. The length of the pool is 15 feet. What is the pool and width rounded to the nearest foot?

Last Answer : 13 feet

Two footings, one circular and the other square, are founded on the surface of a purely cohesionless soil. The diameter of the circular footing is the same as that of the side of the square footing. The ratio between their ultimate bearing capacities will be : (a) 1.0 (b) 1.3 (c) 1.33 (d) 0.75

Description : Two footings, one circular and the other square, are founded on the surface of a purely cohesionless soil. The diameter of the circular footing is the same as that of the side of the square footing. The ratio between their ultimate bearing capacities will be : (a) 1.0 (b) 1.3 (c) 1.33 (d) 0.75

Last Answer : (d) 0.75