In the cement the compound quickest to react with water, is (A) Tri-calcium aluminate (B) Tetra-calcium alumino-ferrite (C) Tri-calcium silicate (D) Di-calcium silicate

In the cement the compound quickest to react with water, is
(A) Tri-calcium aluminate
(B) Tetra-calcium alumino-ferrite
(C) Tri-calcium silicate
(D) Di-calcium silicate
by

1 Answer

Answer :

Answer: Option A
by

Related questions

The compound of Portland cement which reacts immediately with water and also sets first is (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Description : The compound of Portland cement which reacts immediately with water and also sets first is (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Last Answer : Answer: Option C

The compound of Portland cement which contributes to the strength after two to three years is (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra-calcium alumino ferrite

Description : The compound of Portland cement which contributes to the strength after two to three years is (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra-calcium alumino ferrite

Last Answer : Answer: Option B

Pick up the compound responsible for early strength of cement from the following: (A) Tetra-calcium alumino-ferrite (B) Tri-calcium silicate (C) Tri-calcium aluminate (D) Di-calcium silicate

Description : Pick up the compound responsible for early strength of cement from the following: (A) Tetra-calcium alumino-ferrite (B) Tri-calcium silicate (C) Tri-calcium aluminate (D) Di-calcium silicate

Last Answer : Answer: Option B

Initial setting of cement is caused due to (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Description : Initial setting of cement is caused due to (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Last Answer : Answer: Option C

Good quality cement contains higher percentage of (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Description : Good quality cement contains higher percentage of (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Last Answer : Answer: Option A

Ultimate strength to cement is provided by (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Description : Ultimate strength to cement is provided by (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Last Answer : Answer: Option B

Rapid hardening cement contains (A) Tri-calcium silicate (B) Tri-calcium aluminate (C) Tetra-calcium alumino-ferrite (D) Di-calcium silicate

Description : Rapid hardening cement contains (A) Tri-calcium silicate (B) Tri-calcium aluminate (C) Tetra-calcium alumino-ferrite (D) Di-calcium silicate

Last Answer : Answer: Option A

The constituent of cement which is responsible for all the undesirable properties of cement is (A) Di-calcium silicate (B) Tri-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Description : The constituent of cement which is responsible for all the undesirable properties of cement is (A) Di-calcium silicate (B) Tri-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Last Answer : Answer: Option C

To retard the initial setting time of cement, the compound responsible, is (A) Tri-calcium silicate (B) Gypsum (C) Di-calcium silicate (D) Tri-calcium aluminate

Description : To retard the initial setting time of cement, the compound responsible, is (A) Tri-calcium silicate (B) Gypsum (C) Di-calcium silicate (D) Tri-calcium aluminate

Last Answer : Answer: Option B

The main constituent of cement which is responsible for initial setting of cement is (A) Di-calcium silicate (B) Tri-calcium silicate (C) Tri-calcium aluminate (D) All of the above

Description : The main constituent of cement which is responsible for initial setting of cement is (A) Di-calcium silicate (B) Tri-calcium silicate (C) Tri-calcium aluminate (D) All of the above

Last Answer : Answer: Option C

Hydration of cement is due to chemical action of water with (A) Tricalcium silicate and dicalcium silicate (B) Dicalcium silicate and tricalcium aluminate (C) Tricalcium aluminate and tricalcium alumino ferrite (D) All the above

Description : Hydration of cement is due to chemical action of water with (A) Tricalcium silicate and dicalcium silicate (B) Dicalcium silicate and tricalcium aluminate (C) Tricalcium aluminate and tricalcium alumino ferrite (D) All the above

Last Answer : Answer: Option D

The development of first 28 days strength is on account of the hydration of (a) Tricalcium silicate (b) Dicalcium silicate (c) Tricalcium aluminate (d) Tetra calcium alumina ferrite

Description : The development of first 28 days strength is on account of the hydration of (a) Tricalcium silicate (b) Dicalcium silicate (c) Tricalcium aluminate (d) Tetra calcium alumina ferrite

Last Answer : (a) Tricalcium silicate

The first compound which reacts with water when mixed with cement is (a) Tricalcium Aluminate (b) Tricalcium silicate (c) Di-calcium silicate (d) Teracalcium aluminate

Description : The first compound which reacts with water when mixed with cement is (a) Tricalcium Aluminate (b) Tricalcium silicate (c) Di-calcium silicate (d) Teracalcium aluminate

Last Answer : (a) Tricalcium Aluminate

About 70% to 80% of cement is contributed by [ A ] Tricalcium silicate and Tricalcium aluminate [ B ] Tricalcium silicate and Dicalcium silicate [ C ] Tricalcium Aluminate and Dicalcium silicate [ D ] Tricalcium Aluminate and Tetra calcium Aluminoferrite

Description : About 70% to 80% of cement is contributed by [ A ] Tricalcium silicate and Tricalcium aluminate [ B ] Tricalcium silicate and Dicalcium silicate [ C ] Tricalcium Aluminate and Dicalcium silicate [ D ] Tricalcium Aluminate and Tetra calcium Aluminoferrite

Last Answer : [ B ] Tricalcium silicate and Dicalcium silicate

Early attainment of strength in rapid hardening cement is mainly due to (A) Gypsum (B) Finer grinding (C) Tri-calcium silicate (D) Tri-calcium aluminate

Description : Early attainment of strength in rapid hardening cement is mainly due to (A) Gypsum (B) Finer grinding (C) Tri-calcium silicate (D) Tri-calcium aluminate

Last Answer : Answer: Option B

Di-calcium silicate (C2S) (A) Hydrates rapidly (B) Generates less heat of hydration (C) Hardens rapidly (D) Provides less ultimate strength to cement

Description : Di-calcium silicate (C2S) (A) Hydrates rapidly (B) Generates less heat of hydration (C) Hardens rapidly (D) Provides less ultimate strength to cement

Last Answer : Answer: Option B

Main constituents of Portland cement are calcium aluminate and (A) Gypsum(B) Silicates(C) Sodium silicate(D) Carbonates

Description : Main constituents of Portland cement are calcium aluminate and (A) Gypsum (B) Silicates (C) Sodium silicate (D) Carbonates

Last Answer : (B) Silicates

Finely ground calcium aluminate & silicate is a/an (A) Cermet (B) Cement (C) Abrasive (D) Explosive

Description : Finely ground calcium aluminate & silicate is a/an (A) Cermet (B) Cement (C) Abrasive (D) Explosive

Last Answer : (B) Cement

Cement is usually a mixture of : (1) Calcium silicate and calcium aluminate (2) Calcium silicate and calcium ferrate (3) Calcium aluminate and calcium ferrate (4) Lime stone and silicon dioxide

Description : Cement is usually a mixture of : (1) Calcium silicate and calcium aluminate (2) Calcium silicate and calcium ferrate (3) Calcium aluminate and calcium ferrate (4) Lime stone and silicon dioxide 

Last Answer : Calcium silicate and calcium aluminate

Hydration of cement is due to the chemical action of water with. (a) Tricalcium silicate (b) Dicalcium silicate (c) Tricalcium aluminate (d) All of these

Description : Hydration of cement is due to the chemical action of water with. (a) Tricalcium silicate (b) Dicalcium silicate (c) Tricalcium aluminate (d) All of these

Last Answer : (d) All of these

A slow setting cement will have higher percentage of a) tricalcium aluminate b) tricalcium silicate c) Gypsum d) Dicalcium silicate*

Description : A slow setting cement will have higher percentage of a) tricalcium aluminate b) tricalcium silicate c) Gypsum d) Dicalcium silicate*

Last Answer : C2s

The constituent of cement which act as Binders are a) Sand and silica b) Silica and carbon c) tricalcium silicate dicalcium silicate and carbon d) tricalcium aluminate,dicalcium silicate and tricalcium silicate *

Description : The constituent of cement which act as Binders are a) Sand and silica b) Silica and carbon c) tricalcium silicate dicalcium silicate and carbon d) tricalcium aluminate,dicalcium silicate and tricalcium silicate *

Last Answer : d) tricalcium aluminate,dicalcium silicate and tricalcium silicate *

The pH value of water is kept slightly less than 7 so that hydrochloride ions may combine with ammonia ions to form (A) Mono-chloramine (NHCl) (B) Di-chloramine (NH2Cl) (C) Nitrogen tri-chloramine (NCl3) (D) All the above

Description : The pH value of water is kept slightly less than 7 so that hydrochloride ions may combine with  ammonia ions to form  (A) Mono-chloramine (NHCl)  (B) Di-chloramine (NH2Cl)  (C) Nitrogen tri-chloramine (NCl3)  (D) All the above

Last Answer : (D) All the above

This group of alumino-silicate minerals is widely used in making electrical insulators (1) Bauxite (2) Chrornite (3) Manganese (4) Mica

Description : This group of alumino-silicate minerals is widely used in making electrical insulators (1) Bauxite (2) Chrornite (3) Manganese (4) Mica

Last Answer : (4) Mica Explanation: Sheet mica is used principally in the electronic and electrical industries. Its usefulness in these applications is derived from its unique electrical and thermal insulating properties and ... it is a good electrical insulator at the same time as being a good thermal conductor.

This group of alumino-silicate minerals is widely used in making electrical insulators (1) Bauxite (2) Chromite (3) Manganese (4) Mica

Description : This group of alumino-silicate minerals is widely used in making electrical insulators (1) Bauxite (2) Chromite (3) Manganese (4) Mica

Last Answer : Mica

The presence of alkali oxides in alumino silicate ceramics is likely to result in dielectric breakdown due to

Description : The presence of alkali oxides in alumino silicate ceramics is likely to result in dielectric breakdown due to   (A) Polarization (B) Conductivity (C) Structural homogeneties (D) Ionization

Last Answer : The presence of alkali oxides in alumino silicate ceramics is likely to result in dielectric breakdown due to Conductivity 

Iso-octane is used as a reference substance in the definition of octane number and it is assigned an octane number value of 100. Iso-octane is chemically known as (A) α-methyl naphthalene (B) 2-2-4 tri methyl pentane (C) 1, 3 butadiene (D) Tetra methyl ethylene

Description : Iso-octane is used as a reference substance in the definition of octane number and it is assigned an octane number value of 100. Iso-octane is chemically known as (A) α-methyl naphthalene (B) 2-2-4 tri methyl pentane (C) 1, 3 butadiene (D) Tetra methyl ethylene

Last Answer : (B) 2-2-4 tri methyl pentane

Process of replacing the sequence of lines of codes is known as: a. Expanding die macro b. Expanding tri macro c. Tetra macro d. None of these

Description : Process of replacing the sequence of lines of codes is known as: a. Expanding die macro b. Expanding tri macro c. Tetra macro d. None of these

Last Answer : a. Expanding die macro

Tricalcium aluminate (C3A) (A) Reacts fast with water (B) Generates less heat of hydration (C) Causes initial setting and early strength of cement (D) Does not contribute to develop ultimate strength

Description : Tricalcium aluminate (C3A) (A) Reacts fast with water (B) Generates less heat of hydration (C) Causes initial setting and early strength of cement (D) Does not contribute to develop ultimate strength

Last Answer : Answer: Option B

(1) Calcium silicate and calcium alurninate Explanation: Portland cement is the most common type of cement in general use around the world because it is a basic ingredient of concrete, mortar, stucco and most non-specialty grout. It usually originates from limestone. It is a fine powder produced by grinding Portland cement. clinker (more than 90%), a limited amount of calcium sulfate (which controls the set time) and up to 5% minor constituents.

Description : (1) Calcium silicate and calcium alurninate Explanation: Portland cement is the most common type of cement in general use around the world because it is a basic ingredient of concrete, mortar, stucco ... limited amount of calcium sulfate (which controls the set time) and up to 5% minor constituents.

Last Answer : Milk is a colloidal system in which: (1) Water is dispersed in fat (2) Fat is dispersed in water (3) Fat and water are dispersed in each other (4) Fat is dissolved

__________ is the major constituent of the Portland cement. (A) Calcium carbonate (B) Calcium oxide (C) Tricalcium silicate (D) Calcium sulphate

Description : __________ is the major constituent of the Portland cement. (A) Calcium carbonate (B) Calcium oxide (C) Tricalcium silicate (D) Calcium sulphate

Last Answer : (C) Tricalcium silicate

Sodium tri poly phosphate (STPP) is manufactured by reaction of phosphoric acid with sodium(A) Carbonate(B) Phosphate(C) Bicarbonate(D) Silicate

Description : Sodium tri poly phosphate (STPP) is manufactured by reaction of phosphoric acid with sodium (A) Carbonate (B) Phosphate (C) Bicarbonate (D) Silicate

Last Answer : (A) Carbonat

Rare gases are - (1) Mono atomic (2) di atomic (3) tri atomic (4) none of above

Description : Rare gases are - (1) Mono atomic (2) di atomic (3) tri atomic (4) none of above

Last Answer : (1) Mono atomic Explanation: The so-called "rare" gases Neon (Ne), Krypton (Kr) and Xenon (Xe), are present in air in very low concentrations.

Tricalcium aluminate (C3A) [ A ] Hydrating less rapidly [ B ] Is a redundant compound [ C ] To be attacked by alkalies and salts [ D ] None of these

Description : Tricalcium aluminate (C3A) [ A ] Hydrating less rapidly [ B ] Is a redundant compound [ C ] To be attacked by alkalies and salts [ D ] None of these

Last Answer : [ C ] To be attacked by alkalies and salts

The fluid generally used for grouting is (A) Cement and water mix (B) Clay suspension (C) Sodium silicate (D) All the above

Description : The fluid generally used for grouting is (A) Cement and water mix (B) Clay suspension (C) Sodium silicate (D) All the above

Last Answer : (D) All the above

Which of the following cements contains maximum percentage of dicalcium silicate? (A) Ordinary Portland cement (B) Low heat cement (C) Rapid hardening cement (D) Sulphate resisting cement

Description : Which of the following cements contains maximum percentage of dicalcium silicate? (A) Ordinary Portland cement (B) Low heat cement (C) Rapid hardening cement (D) Sulphate resisting cement

Last Answer : Answer: Option B

The sum of the percentage of tricalcium silicate and dicalcium silicate for Portland cement varies from. (a) 50 to 60% (b) 60 to 70% (c) 70 to 80% (d) 80 to 90%

Description : The sum of the percentage of tricalcium silicate and dicalcium silicate for Portland cement varies from. (a) 50 to 60% (b) 60 to 70% (c) 70 to 80% (d) 80 to 90%

Last Answer : (c) 70 to 80%

High percentage of tricalcium silicate and low percentage of dicalcium silicate in cement results in. (a) Rapid hardening (b) High early strength (c) High heat of generation (d) All the above

Description : High percentage of tricalcium silicate and low percentage of dicalcium silicate in cement results in. (a) Rapid hardening (b) High early strength (c) High heat of generation (d) All the above

Last Answer : (d) All the above

The presence of dicalcium silicate in cement. (a) Hydrates the cement slowly. (b) Generates less heat of hydration. (c) Has more resistance to sulphate attack. (d) All of these

Description : The presence of dicalcium silicate in cement. (a) Hydrates the cement slowly. (b) Generates less heat of hydration. (c) Has more resistance to sulphate attack. (d) All of these

Last Answer : (d) All of these

The presence of tricalcium silicate in cement (a) Hydrates the cement rapidly (b) Generates less heat of hydration. (c) Offer high resistance to sulphate attack (d) All of these

Description : The presence of tricalcium silicate in cement (a) Hydrates the cement rapidly (b) Generates less heat of hydration. (c) Offer high resistance to sulphate attack (d) All of these

Last Answer : (a) Hydrates the cement rapidly

The most commonly used admixture which prolongs the setting and hardening time is (A) Gypsum (B) Calcium chloride (C) Sodium silicate (D) All of the above

Description : The most commonly used admixture which prolongs the setting and hardening time is (A) Gypsum (B) Calcium chloride (C) Sodium silicate (D) All of the above

Last Answer : (A) Gypsum

‘Plaster of paris’ chemically known as (1) Sodium Aluminate (2) Calcium sulphate (3) Spdium bicarbonate (4) Sodium acetate

Description : ‘Plaster of paris’ chemically known as (1) Sodium Aluminate (2) Calcium sulphate (3) Spdium bicarbonate (4) Sodium acetate

Last Answer : (2) Calcium sulphate Explanation: Calcium sulphate is a calcium salt that is used for a variety of purposes. It exists in various forms and states of hydration.

The Refrigerant 'FREON' is – (1) Calcium Tetra Fluoride (2) Difluoro Dichloro Methane (3) Fluorspar and Felspar (4) Hydrofluosilicic Acid

Description : The Refrigerant 'FREON' is – (1) Calcium Tetra Fluoride (2) Difluoro Dichloro Methane (3) Fluorspar and Felspar (4) Hydrofluosilicic Acid

Last Answer : (2) Difluoro Dichloro Methane Explanation: Dichlorodifluorornethane (R-12), is a colourless gas, and usually sold under the brand name Freon-12, is a chlorofluorocarbon halornethane (CFC), used as a ... 1994 clue to concerns about damage to the ozone layer. It is soluble in many organic solvents.

The Refrigerant ‘FREON' is (1) Calcium Tetra Fluoride (2) Difluoro Dichloro Methane (3) Fluorspar and Felspar (4) Hydrofluosilicic Acid

Description : The Refrigerant ‘FREON' is (1) Calcium Tetra Fluoride (2) Difluoro Dichloro Methane (3) Fluorspar and Felspar (4) Hydrofluosilicic Acid

Last Answer : Difluoro Dichloro Methane

Pick out the wrong statement. (A) High early strength cement are made from materials having high silica to lime ratio (B) The function of gypsum in cement is to enhance its initial setting rate (C) Acid resistant cements are known as silicate cement (D) Major component of greyish Portland cement is tricalcium silicate

Description : Pick out the wrong statement. (A) High early strength cement are made from materials having high silica to lime ratio (B) The function of gypsum in cement is to enhance its initial ... cements are known as silicate cement (D) Major component of greyish Portland cement is tricalcium silicate

Last Answer : (A) High early strength cement are made from materials having high silica to lime ratio

Which cement is less soluble in the oral cavity: A. Polycarboxylate B. Zinc phosphate C. Silicate phosphate D. GIC

Description : Which cement is less soluble in the oral cavity: A. Polycarboxylate B. Zinc phosphate C. Silicate phosphate D. GIC

Last Answer : D. GIC

Tetra ethyle lead (TEL) is - (1) a catalyst in burning fossil fuel (2) an antioxidant (3) areductant (4) an antiknock compound

Description : Tetra ethyle lead (TEL) is - (1) a catalyst in burning fossil fuel (2) an antioxidant (3) areductant (4) an antiknock compound

Last Answer : (4) an antiknock compound Explanation: Tetraethyl lead was extensively used as an additive to gasoline, wherein it served as an effective antiknock agent and prevented exhaust valve and seat wear. ... needed. Typical formulations called for 1 part of prepared TEL to 1260 parts untreated gasoline.

The compound to which H2 does not add is – (1) Biphenyl ethylene (2) Tetraphenyl ethylene (3) Tetra - a - naphthylethylene (4) Tetra - 9 - phenanthrylethylene

Description : The compound to which H2 does not add is – (1) Biphenyl ethylene (2) Tetraphenyl ethylene (3) Tetra - a - naphthylethylene (4) Tetra - 9 - phenanthrylethylene

Last Answer : (2) Tetraphenyl ethylene Explanation: While H2 is not very reactive under standard conditions, it does form compounds with most elements. Millions of hydrocarbons are known, but they are not formed ... are more electronegative, such as halogens. Hydrogen forms a vast array of compounds with carbon.

Which of the following is an organometallic compound? (A) Isopropyl alcohol (B) Tetra-ethyl lead (C) Zeolite (D) Cumene

Description : Which of the following is an organometallic compound? (A) Isopropyl alcohol (B) Tetra-ethyl lead (C) Zeolite (D) Cumene

Last Answer : (B) Tetra-ethyl lead

How many hydrogen atoms are there in the organic compound 1,1,2,2-tetrabromoethane (read: tetra - bromo - ethane)?

Description : How many hydrogen atoms are there in the organic compound 1,1,2,2-tetrabromoethane (read: tetra - bromo - ethane)?  

Last Answer : ANSWER: 2