Initial setting of cement is caused due to (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Initial setting of cement is caused due to
(A) Tri-calcium silicate
(B) Di-calcium silicate
(C) Tri-calcium aluminate
(D) Tetra calcium alumino ferrite
by

1 Answer

Answer :

Answer: Option C
by

Related questions

The compound of Portland cement which reacts immediately with water and also sets first is (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Description : The compound of Portland cement which reacts immediately with water and also sets first is (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Last Answer : Answer: Option C

The compound of Portland cement which contributes to the strength after two to three years is (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra-calcium alumino ferrite

Description : The compound of Portland cement which contributes to the strength after two to three years is (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra-calcium alumino ferrite

Last Answer : Answer: Option B

Pick up the compound responsible for early strength of cement from the following: (A) Tetra-calcium alumino-ferrite (B) Tri-calcium silicate (C) Tri-calcium aluminate (D) Di-calcium silicate

Description : Pick up the compound responsible for early strength of cement from the following: (A) Tetra-calcium alumino-ferrite (B) Tri-calcium silicate (C) Tri-calcium aluminate (D) Di-calcium silicate

Last Answer : Answer: Option B

Good quality cement contains higher percentage of (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Description : Good quality cement contains higher percentage of (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Last Answer : Answer: Option A

Ultimate strength to cement is provided by (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Description : Ultimate strength to cement is provided by (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Last Answer : Answer: Option B

Rapid hardening cement contains (A) Tri-calcium silicate (B) Tri-calcium aluminate (C) Tetra-calcium alumino-ferrite (D) Di-calcium silicate

Description : Rapid hardening cement contains (A) Tri-calcium silicate (B) Tri-calcium aluminate (C) Tetra-calcium alumino-ferrite (D) Di-calcium silicate

Last Answer : Answer: Option A

In the cement the compound quickest to react with water, is (A) Tri-calcium aluminate (B) Tetra-calcium alumino-ferrite (C) Tri-calcium silicate (D) Di-calcium silicate

Description : In the cement the compound quickest to react with water, is (A) Tri-calcium aluminate (B) Tetra-calcium alumino-ferrite (C) Tri-calcium silicate (D) Di-calcium silicate

Last Answer : Answer: Option A

The constituent of cement which is responsible for all the undesirable properties of cement is (A) Di-calcium silicate (B) Tri-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Description : The constituent of cement which is responsible for all the undesirable properties of cement is (A) Di-calcium silicate (B) Tri-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Last Answer : Answer: Option C

The main constituent of cement which is responsible for initial setting of cement is (A) Di-calcium silicate (B) Tri-calcium silicate (C) Tri-calcium aluminate (D) All of the above

Description : The main constituent of cement which is responsible for initial setting of cement is (A) Di-calcium silicate (B) Tri-calcium silicate (C) Tri-calcium aluminate (D) All of the above

Last Answer : Answer: Option C

To retard the initial setting time of cement, the compound responsible, is (A) Tri-calcium silicate (B) Gypsum (C) Di-calcium silicate (D) Tri-calcium aluminate

Description : To retard the initial setting time of cement, the compound responsible, is (A) Tri-calcium silicate (B) Gypsum (C) Di-calcium silicate (D) Tri-calcium aluminate

Last Answer : Answer: Option B

Hydration of cement is due to chemical action of water with (A) Tricalcium silicate and dicalcium silicate (B) Dicalcium silicate and tricalcium aluminate (C) Tricalcium aluminate and tricalcium alumino ferrite (D) All the above

Description : Hydration of cement is due to chemical action of water with (A) Tricalcium silicate and dicalcium silicate (B) Dicalcium silicate and tricalcium aluminate (C) Tricalcium aluminate and tricalcium alumino ferrite (D) All the above

Last Answer : Answer: Option D

The development of first 28 days strength is on account of the hydration of (a) Tricalcium silicate (b) Dicalcium silicate (c) Tricalcium aluminate (d) Tetra calcium alumina ferrite

Description : The development of first 28 days strength is on account of the hydration of (a) Tricalcium silicate (b) Dicalcium silicate (c) Tricalcium aluminate (d) Tetra calcium alumina ferrite

Last Answer : (a) Tricalcium silicate

Early attainment of strength in rapid hardening cement is mainly due to (A) Gypsum (B) Finer grinding (C) Tri-calcium silicate (D) Tri-calcium aluminate

Description : Early attainment of strength in rapid hardening cement is mainly due to (A) Gypsum (B) Finer grinding (C) Tri-calcium silicate (D) Tri-calcium aluminate

Last Answer : Answer: Option B

About 70% to 80% of cement is contributed by [ A ] Tricalcium silicate and Tricalcium aluminate [ B ] Tricalcium silicate and Dicalcium silicate [ C ] Tricalcium Aluminate and Dicalcium silicate [ D ] Tricalcium Aluminate and Tetra calcium Aluminoferrite

Description : About 70% to 80% of cement is contributed by [ A ] Tricalcium silicate and Tricalcium aluminate [ B ] Tricalcium silicate and Dicalcium silicate [ C ] Tricalcium Aluminate and Dicalcium silicate [ D ] Tricalcium Aluminate and Tetra calcium Aluminoferrite

Last Answer : [ B ] Tricalcium silicate and Dicalcium silicate

The first compound which reacts with water when mixed with cement is (a) Tricalcium Aluminate (b) Tricalcium silicate (c) Di-calcium silicate (d) Teracalcium aluminate

Description : The first compound which reacts with water when mixed with cement is (a) Tricalcium Aluminate (b) Tricalcium silicate (c) Di-calcium silicate (d) Teracalcium aluminate

Last Answer : (a) Tricalcium Aluminate

A slow setting cement will have higher percentage of a) tricalcium aluminate b) tricalcium silicate c) Gypsum d) Dicalcium silicate*

Description : A slow setting cement will have higher percentage of a) tricalcium aluminate b) tricalcium silicate c) Gypsum d) Dicalcium silicate*

Last Answer : C2s

Di-calcium silicate (C2S) (A) Hydrates rapidly (B) Generates less heat of hydration (C) Hardens rapidly (D) Provides less ultimate strength to cement

Description : Di-calcium silicate (C2S) (A) Hydrates rapidly (B) Generates less heat of hydration (C) Hardens rapidly (D) Provides less ultimate strength to cement

Last Answer : Answer: Option B

Hydration of cement is due to the chemical action of water with. (a) Tricalcium silicate (b) Dicalcium silicate (c) Tricalcium aluminate (d) All of these

Description : Hydration of cement is due to the chemical action of water with. (a) Tricalcium silicate (b) Dicalcium silicate (c) Tricalcium aluminate (d) All of these

Last Answer : (d) All of these

Tricalcium aluminate (C3A) (A) Reacts fast with water (B) Generates less heat of hydration (C) Causes initial setting and early strength of cement (D) Does not contribute to develop ultimate strength

Description : Tricalcium aluminate (C3A) (A) Reacts fast with water (B) Generates less heat of hydration (C) Causes initial setting and early strength of cement (D) Does not contribute to develop ultimate strength

Last Answer : Answer: Option B

Main constituents of Portland cement are calcium aluminate and (A) Gypsum(B) Silicates(C) Sodium silicate(D) Carbonates

Description : Main constituents of Portland cement are calcium aluminate and (A) Gypsum (B) Silicates (C) Sodium silicate (D) Carbonates

Last Answer : (B) Silicates

Finely ground calcium aluminate & silicate is a/an (A) Cermet (B) Cement (C) Abrasive (D) Explosive

Description : Finely ground calcium aluminate & silicate is a/an (A) Cermet (B) Cement (C) Abrasive (D) Explosive

Last Answer : (B) Cement

Cement is usually a mixture of : (1) Calcium silicate and calcium aluminate (2) Calcium silicate and calcium ferrate (3) Calcium aluminate and calcium ferrate (4) Lime stone and silicon dioxide

Description : Cement is usually a mixture of : (1) Calcium silicate and calcium aluminate (2) Calcium silicate and calcium ferrate (3) Calcium aluminate and calcium ferrate (4) Lime stone and silicon dioxide 

Last Answer : Calcium silicate and calcium aluminate

Pick out the wrong statement. (A) High early strength cement are made from materials having high silica to lime ratio (B) The function of gypsum in cement is to enhance its initial setting rate (C) Acid resistant cements are known as silicate cement (D) Major component of greyish Portland cement is tricalcium silicate

Description : Pick out the wrong statement. (A) High early strength cement are made from materials having high silica to lime ratio (B) The function of gypsum in cement is to enhance its initial ... cements are known as silicate cement (D) Major component of greyish Portland cement is tricalcium silicate

Last Answer : (A) High early strength cement are made from materials having high silica to lime ratio

The constituent of cement which act as Binders are a) Sand and silica b) Silica and carbon c) tricalcium silicate dicalcium silicate and carbon d) tricalcium aluminate,dicalcium silicate and tricalcium silicate *

Description : The constituent of cement which act as Binders are a) Sand and silica b) Silica and carbon c) tricalcium silicate dicalcium silicate and carbon d) tricalcium aluminate,dicalcium silicate and tricalcium silicate *

Last Answer : d) tricalcium aluminate,dicalcium silicate and tricalcium silicate *

The presence of alkali oxides in alumino silicate ceramics is likely to result in dielectric breakdown due to

Description : The presence of alkali oxides in alumino silicate ceramics is likely to result in dielectric breakdown due to   (A) Polarization (B) Conductivity (C) Structural homogeneties (D) Ionization

Last Answer : The presence of alkali oxides in alumino silicate ceramics is likely to result in dielectric breakdown due to Conductivity 

The most commonly used admixture which prolongs the setting and hardening time is (A) Gypsum (B) Calcium chloride (C) Sodium silicate (D) All of the above

Description : The most commonly used admixture which prolongs the setting and hardening time is (A) Gypsum (B) Calcium chloride (C) Sodium silicate (D) All of the above

Last Answer : (A) Gypsum

This group of alumino-silicate minerals is widely used in making electrical insulators (1) Bauxite (2) Chrornite (3) Manganese (4) Mica

Description : This group of alumino-silicate minerals is widely used in making electrical insulators (1) Bauxite (2) Chrornite (3) Manganese (4) Mica

Last Answer : (4) Mica Explanation: Sheet mica is used principally in the electronic and electrical industries. Its usefulness in these applications is derived from its unique electrical and thermal insulating properties and ... it is a good electrical insulator at the same time as being a good thermal conductor.

This group of alumino-silicate minerals is widely used in making electrical insulators (1) Bauxite (2) Chromite (3) Manganese (4) Mica

Description : This group of alumino-silicate minerals is widely used in making electrical insulators (1) Bauxite (2) Chromite (3) Manganese (4) Mica

Last Answer : Mica

The pH value of water is kept slightly less than 7 so that hydrochloride ions may combine with ammonia ions to form (A) Mono-chloramine (NHCl) (B) Di-chloramine (NH2Cl) (C) Nitrogen tri-chloramine (NCl3) (D) All the above

Description : The pH value of water is kept slightly less than 7 so that hydrochloride ions may combine with  ammonia ions to form  (A) Mono-chloramine (NHCl)  (B) Di-chloramine (NH2Cl)  (C) Nitrogen tri-chloramine (NCl3)  (D) All the above

Last Answer : (D) All the above

Iso-octane is used as a reference substance in the definition of octane number and it is assigned an octane number value of 100. Iso-octane is chemically known as (A) α-methyl naphthalene (B) 2-2-4 tri methyl pentane (C) 1, 3 butadiene (D) Tetra methyl ethylene

Description : Iso-octane is used as a reference substance in the definition of octane number and it is assigned an octane number value of 100. Iso-octane is chemically known as (A) α-methyl naphthalene (B) 2-2-4 tri methyl pentane (C) 1, 3 butadiene (D) Tetra methyl ethylene

Last Answer : (B) 2-2-4 tri methyl pentane

Process of replacing the sequence of lines of codes is known as: a. Expanding die macro b. Expanding tri macro c. Tetra macro d. None of these

Description : Process of replacing the sequence of lines of codes is known as: a. Expanding die macro b. Expanding tri macro c. Tetra macro d. None of these

Last Answer : a. Expanding die macro

For an ordinary Portland cement (A) Residual does not exceed 10% when sieved through IS Sieve No. 9 (B) Soundness varies from 5 to 10 mm (C) Initial setting time is not less than 30 minutes (D) Compressive stress after 7 days, is not less than 175 kg/cm2

Description : For an ordinary Portland cement (A) Residual does not exceed 10% when sieved through IS Sieve No. 9 (B) Soundness varies from 5 to 10 mm (C) Initial setting time is not less than 30 minutes (D) Compressive stress after 7 days, is not less than 175 kg/cm2

Last Answer : (C) Initial setting time is not less than 30 minutes

As compared to ordinary Portland cement, high alumina cement has (A) Higher initial setting time but lower final setting time (B) Lower initial setting time but higher final setting time (C) Higher initial and final setting times (D) Lower initial and final setting times

Description : As compared to ordinary Portland cement, high alumina cement has (A) Higher initial setting time but lower final setting time (B) Lower initial setting time but higher final setting time (C) Higher initial and final setting times (D) Lower initial and final setting times

Last Answer : Answer: Option A

Soundness test of cement determines (A) Quality of free lime (B) Ultimate strength (C) Durability (D) Initial setting

Description : Soundness test of cement determines (A) Quality of free lime (B) Ultimate strength (C) Durability (D) Initial setting

Last Answer : Answer: Option A

Pick up the correct statement regarding low heat cement from the following: (A) It possesses less compressive strength (B) Its initial setting time is about one hour (C) Its final setting time is about 10 hours (D) All the above

Description : Pick up the correct statement regarding low heat cement from the following: (A) It possesses less compressive strength (B) Its initial setting time is about one hour (C) Its final setting time is about 10 hours (D) All the above

Last Answer : Answer: Option D

Initial setting time of cement for asbestos cement products should be not less than (A) 30 minutes (B) 50 minutes (C) 75 minutes (D) 90 minutes

Description : Initial setting time of cement for asbestos cement products should be not less than (A) 30 minutes (B) 50 minutes (C) 75 minutes (D) 90 minutes

Last Answer : Answer: Option D

The initial setting time for ordinary Portland cement as per IS specifications should not be less than (A) 10 minutes (B) 30 minutes (C) 60 minutes (D) 600 minutes

Description : The initial setting time for ordinary Portland cement as per IS specifications should not be less than (A) 10 minutes (B) 30 minutes (C) 60 minutes (D) 600 minutes

Last Answer : Answer: Option B

The basic purpose of a retarder in concrete is (A) To increase the initial setting time of cement paste in concrete (B) To decrease the initial setting time of cement paste in concrete (C) To render the concrete more water tight (D) To improve the workability of concrete mix

Description : The basic purpose of a retarder in concrete is (A) To increase the initial setting time of cement paste in concrete (B) To decrease the initial setting time of cement paste in concrete (C) To render the concrete more water tight (D) To improve the workability of concrete mix

Last Answer : Answer: Option A

If ‘W’ is the percentage of water required for normal consistency of cement, water to be added for determination of initial setting time is (a) 0.50 W (b) 0.62 W (c) 0.75 W (d) 0.85 W

Description : If ‘W’ is the percentage of water required for normal consistency of cement, water to be added for determination of initial setting time is (a) 0.50 W (b) 0.62 W (c) 0.75 W (d) 0.85 W

Last Answer : (d) 0.85 W

According to IS Code , the requirement of an ordinary Portland cement is (a) The residue does not exceed 10% when sieved through is sieve no .9 (b) Its initial setting time is not less than 30 minutes. (c) its expansion is not morethan 10mm for unaerated cement (d) All the above.

Description : According to IS Code , the requirement of an ordinary Portland cement is (a) The residue does not exceed 10% when sieved through is sieve no .9 (b) Its initial setting time is not less than 30 minutes. (c) its expansion is not morethan 10mm for unaerated cement (d) All the above.

Last Answer : (d) All the above.

The gypsum is added to the cement for (a) Providing high strength to the cement (b) Controlling the initial setting time of cement. (c) Lowering the clinkering temp of cement (d) All the above.

Description : The gypsum is added to the cement for (a) Providing high strength to the cement (b) Controlling the initial setting time of cement. (c) Lowering the clinkering temp of cement (d) All the above.

Last Answer : (b) Controlling the initial setting time of cement.

(1) Calcium silicate and calcium alurninate Explanation: Portland cement is the most common type of cement in general use around the world because it is a basic ingredient of concrete, mortar, stucco and most non-specialty grout. It usually originates from limestone. It is a fine powder produced by grinding Portland cement. clinker (more than 90%), a limited amount of calcium sulfate (which controls the set time) and up to 5% minor constituents.

Description : (1) Calcium silicate and calcium alurninate Explanation: Portland cement is the most common type of cement in general use around the world because it is a basic ingredient of concrete, mortar, stucco ... limited amount of calcium sulfate (which controls the set time) and up to 5% minor constituents.

Last Answer : Milk is a colloidal system in which: (1) Water is dispersed in fat (2) Fat is dispersed in water (3) Fat and water are dispersed in each other (4) Fat is dissolved

__________ is the major constituent of the Portland cement. (A) Calcium carbonate (B) Calcium oxide (C) Tricalcium silicate (D) Calcium sulphate

Description : __________ is the major constituent of the Portland cement. (A) Calcium carbonate (B) Calcium oxide (C) Tricalcium silicate (D) Calcium sulphate

Last Answer : (C) Tricalcium silicate

Sodium tri poly phosphate (STPP) is manufactured by reaction of phosphoric acid with sodium(A) Carbonate(B) Phosphate(C) Bicarbonate(D) Silicate

Description : Sodium tri poly phosphate (STPP) is manufactured by reaction of phosphoric acid with sodium (A) Carbonate (B) Phosphate (C) Bicarbonate (D) Silicate

Last Answer : (A) Carbonat

Rare gases are - (1) Mono atomic (2) di atomic (3) tri atomic (4) none of above

Description : Rare gases are - (1) Mono atomic (2) di atomic (3) tri atomic (4) none of above

Last Answer : (1) Mono atomic Explanation: The so-called "rare" gases Neon (Ne), Krypton (Kr) and Xenon (Xe), are present in air in very low concentrations.

Setting time of cement increases by adding (A) Gypsum (B) Hydrogen peroxide (C) Calcium chloride (D) Sodium oxide

Description : Setting time of cement increases by adding (A) Gypsum (B) Hydrogen peroxide (C) Calcium chloride (D) Sodium oxide

Last Answer : Answer: Option A

Setting time of cement increases by adding (i)gypsum (ii)sodium oxide (iii)calcium chloride [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Description : Setting time of cement increases by adding (i)gypsum (ii)sodium oxide (iii)calcium chloride [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Last Answer : [ A ] i

Setting of cement is due to the hydration of calcium silicates and?

Description : Setting of cement is due to the hydration of calcium silicates and?

Last Answer : Calcium aluminates

The fluid generally used for grouting is (A) Cement and water mix (B) Clay suspension (C) Sodium silicate (D) All the above

Description : The fluid generally used for grouting is (A) Cement and water mix (B) Clay suspension (C) Sodium silicate (D) All the above

Last Answer : (D) All the above

Which of the following cements contains maximum percentage of dicalcium silicate? (A) Ordinary Portland cement (B) Low heat cement (C) Rapid hardening cement (D) Sulphate resisting cement

Description : Which of the following cements contains maximum percentage of dicalcium silicate? (A) Ordinary Portland cement (B) Low heat cement (C) Rapid hardening cement (D) Sulphate resisting cement

Last Answer : Answer: Option B