Rapid hardening cement contains (A) Tri-calcium silicate (B) Tri-calcium aluminate (C) Tetra-calcium alumino-ferrite (D) Di-calcium silicate

Rapid hardening cement contains
(A) Tri-calcium silicate
(B) Tri-calcium aluminate
(C) Tetra-calcium alumino-ferrite
(D) Di-calcium silicate
by

1 Answer

Answer :

Answer: Option A
by

Related questions

Good quality cement contains higher percentage of (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Description : Good quality cement contains higher percentage of (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Last Answer : Answer: Option A

The compound of Portland cement which reacts immediately with water and also sets first is (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Description : The compound of Portland cement which reacts immediately with water and also sets first is (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Last Answer : Answer: Option C

Initial setting of cement is caused due to (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Description : Initial setting of cement is caused due to (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Last Answer : Answer: Option C

The compound of Portland cement which contributes to the strength after two to three years is (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra-calcium alumino ferrite

Description : The compound of Portland cement which contributes to the strength after two to three years is (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra-calcium alumino ferrite

Last Answer : Answer: Option B

Pick up the compound responsible for early strength of cement from the following: (A) Tetra-calcium alumino-ferrite (B) Tri-calcium silicate (C) Tri-calcium aluminate (D) Di-calcium silicate

Description : Pick up the compound responsible for early strength of cement from the following: (A) Tetra-calcium alumino-ferrite (B) Tri-calcium silicate (C) Tri-calcium aluminate (D) Di-calcium silicate

Last Answer : Answer: Option B

Ultimate strength to cement is provided by (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Description : Ultimate strength to cement is provided by (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Last Answer : Answer: Option B

In the cement the compound quickest to react with water, is (A) Tri-calcium aluminate (B) Tetra-calcium alumino-ferrite (C) Tri-calcium silicate (D) Di-calcium silicate

Description : In the cement the compound quickest to react with water, is (A) Tri-calcium aluminate (B) Tetra-calcium alumino-ferrite (C) Tri-calcium silicate (D) Di-calcium silicate

Last Answer : Answer: Option A

The constituent of cement which is responsible for all the undesirable properties of cement is (A) Di-calcium silicate (B) Tri-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Description : The constituent of cement which is responsible for all the undesirable properties of cement is (A) Di-calcium silicate (B) Tri-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Last Answer : Answer: Option C

Early attainment of strength in rapid hardening cement is mainly due to (A) Gypsum (B) Finer grinding (C) Tri-calcium silicate (D) Tri-calcium aluminate

Description : Early attainment of strength in rapid hardening cement is mainly due to (A) Gypsum (B) Finer grinding (C) Tri-calcium silicate (D) Tri-calcium aluminate

Last Answer : Answer: Option B

The main constituent of cement which is responsible for initial setting of cement is (A) Di-calcium silicate (B) Tri-calcium silicate (C) Tri-calcium aluminate (D) All of the above

Description : The main constituent of cement which is responsible for initial setting of cement is (A) Di-calcium silicate (B) Tri-calcium silicate (C) Tri-calcium aluminate (D) All of the above

Last Answer : Answer: Option C

To retard the initial setting time of cement, the compound responsible, is (A) Tri-calcium silicate (B) Gypsum (C) Di-calcium silicate (D) Tri-calcium aluminate

Description : To retard the initial setting time of cement, the compound responsible, is (A) Tri-calcium silicate (B) Gypsum (C) Di-calcium silicate (D) Tri-calcium aluminate

Last Answer : Answer: Option B

Hydration of cement is due to chemical action of water with (A) Tricalcium silicate and dicalcium silicate (B) Dicalcium silicate and tricalcium aluminate (C) Tricalcium aluminate and tricalcium alumino ferrite (D) All the above

Description : Hydration of cement is due to chemical action of water with (A) Tricalcium silicate and dicalcium silicate (B) Dicalcium silicate and tricalcium aluminate (C) Tricalcium aluminate and tricalcium alumino ferrite (D) All the above

Last Answer : Answer: Option D

The development of first 28 days strength is on account of the hydration of (a) Tricalcium silicate (b) Dicalcium silicate (c) Tricalcium aluminate (d) Tetra calcium alumina ferrite

Description : The development of first 28 days strength is on account of the hydration of (a) Tricalcium silicate (b) Dicalcium silicate (c) Tricalcium aluminate (d) Tetra calcium alumina ferrite

Last Answer : (a) Tricalcium silicate

About 70% to 80% of cement is contributed by [ A ] Tricalcium silicate and Tricalcium aluminate [ B ] Tricalcium silicate and Dicalcium silicate [ C ] Tricalcium Aluminate and Dicalcium silicate [ D ] Tricalcium Aluminate and Tetra calcium Aluminoferrite

Description : About 70% to 80% of cement is contributed by [ A ] Tricalcium silicate and Tricalcium aluminate [ B ] Tricalcium silicate and Dicalcium silicate [ C ] Tricalcium Aluminate and Dicalcium silicate [ D ] Tricalcium Aluminate and Tetra calcium Aluminoferrite

Last Answer : [ B ] Tricalcium silicate and Dicalcium silicate

The first compound which reacts with water when mixed with cement is (a) Tricalcium Aluminate (b) Tricalcium silicate (c) Di-calcium silicate (d) Teracalcium aluminate

Description : The first compound which reacts with water when mixed with cement is (a) Tricalcium Aluminate (b) Tricalcium silicate (c) Di-calcium silicate (d) Teracalcium aluminate

Last Answer : (a) Tricalcium Aluminate

Which of the following cements contains maximum percentage of dicalcium silicate? (A) Ordinary Portland cement (B) Low heat cement (C) Rapid hardening cement (D) Sulphate resisting cement

Description : Which of the following cements contains maximum percentage of dicalcium silicate? (A) Ordinary Portland cement (B) Low heat cement (C) Rapid hardening cement (D) Sulphate resisting cement

Last Answer : Answer: Option B

High percentage of tricalcium silicate and low percentage of dicalcium silicate in cement results in. (a) Rapid hardening (b) High early strength (c) High heat of generation (d) All the above

Description : High percentage of tricalcium silicate and low percentage of dicalcium silicate in cement results in. (a) Rapid hardening (b) High early strength (c) High heat of generation (d) All the above

Last Answer : (d) All the above

Di-calcium silicate (C2S) (A) Hydrates rapidly (B) Generates less heat of hydration (C) Hardens rapidly (D) Provides less ultimate strength to cement

Description : Di-calcium silicate (C2S) (A) Hydrates rapidly (B) Generates less heat of hydration (C) Hardens rapidly (D) Provides less ultimate strength to cement

Last Answer : Answer: Option B

Main constituents of Portland cement are calcium aluminate and (A) Gypsum(B) Silicates(C) Sodium silicate(D) Carbonates

Description : Main constituents of Portland cement are calcium aluminate and (A) Gypsum (B) Silicates (C) Sodium silicate (D) Carbonates

Last Answer : (B) Silicates

Finely ground calcium aluminate & silicate is a/an (A) Cermet (B) Cement (C) Abrasive (D) Explosive

Description : Finely ground calcium aluminate & silicate is a/an (A) Cermet (B) Cement (C) Abrasive (D) Explosive

Last Answer : (B) Cement

Cement is usually a mixture of : (1) Calcium silicate and calcium aluminate (2) Calcium silicate and calcium ferrate (3) Calcium aluminate and calcium ferrate (4) Lime stone and silicon dioxide

Description : Cement is usually a mixture of : (1) Calcium silicate and calcium aluminate (2) Calcium silicate and calcium ferrate (3) Calcium aluminate and calcium ferrate (4) Lime stone and silicon dioxide 

Last Answer : Calcium silicate and calcium aluminate

Hydration of cement is due to the chemical action of water with. (a) Tricalcium silicate (b) Dicalcium silicate (c) Tricalcium aluminate (d) All of these

Description : Hydration of cement is due to the chemical action of water with. (a) Tricalcium silicate (b) Dicalcium silicate (c) Tricalcium aluminate (d) All of these

Last Answer : (d) All of these

When compared to ordinary Portland cement, Rapid hardening Portland cement contains ______________ amount of lime content [ A ] Equal [ B ] Greater [ C ] Lesser [ D ] Zero

Description : When compared to ordinary Portland cement, Rapid hardening Portland cement contains ______________ amount of lime content [ A ] Equal [ B ] Greater [ C ] Lesser [ D ] Zero

Last Answer : [ B ] Greater

A slow setting cement will have higher percentage of a) tricalcium aluminate b) tricalcium silicate c) Gypsum d) Dicalcium silicate*

Description : A slow setting cement will have higher percentage of a) tricalcium aluminate b) tricalcium silicate c) Gypsum d) Dicalcium silicate*

Last Answer : C2s

The constituent of cement which act as Binders are a) Sand and silica b) Silica and carbon c) tricalcium silicate dicalcium silicate and carbon d) tricalcium aluminate,dicalcium silicate and tricalcium silicate *

Description : The constituent of cement which act as Binders are a) Sand and silica b) Silica and carbon c) tricalcium silicate dicalcium silicate and carbon d) tricalcium aluminate,dicalcium silicate and tricalcium silicate *

Last Answer : d) tricalcium aluminate,dicalcium silicate and tricalcium silicate *

The most commonly used admixture which prolongs the setting and hardening time is (A) Gypsum (B) Calcium chloride (C) Sodium silicate (D) All of the above

Description : The most commonly used admixture which prolongs the setting and hardening time is (A) Gypsum (B) Calcium chloride (C) Sodium silicate (D) All of the above

Last Answer : (A) Gypsum

You are asked to construct a massive dam, the type of cement you will use, is (A) Ordinary Portland cement (B) Rapid hardening cement (C) Low heat cement (D) Blast furnace slag cement

Description : You are asked to construct a massive dam, the type of cement you will use, is (A) Ordinary Portland cement (B) Rapid hardening cement (C) Low heat cement (D) Blast furnace slag cement

Last Answer : Answer: Option C

The high strength of rapid hardening cement at early stage, is due to its (A) Finer grinding (B) Burning at high temperature (C) Increased lime cement (D) Higher content of tricalcium

Description : The high strength of rapid hardening cement at early stage, is due to its (A) Finer grinding (B) Burning at high temperature (C) Increased lime cement (D) Higher content of tricalcium

Last Answer : Answer: Option C

Hardening of cement occurs at (A) Rapid rate during the first few days and afterwards it continues to increase at a decreased rate (B) Slow rate during the first few days and afterwards it continues to increase at a rapid rate (C) Uniform rate throughout its age (D) None of these

Description : Hardening of cement occurs at (A) Rapid rate during the first few days and afterwards it continues to increase at a decreased rate (B) Slow rate during the first few days and afterwards it continues to increase at a rapid rate (C) Uniform rate throughout its age (D) None of these

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) High percentage of C3S and low percentage of C2S cause rapid hardening (B) High percentage of C3S and low percentage of C2S make the cement less resistive to chemical attack (C) Low percentage of C3S and high percentage of C2S contribute to slow hardening (D) All the above

Description : Pick up the correct statement from the following: (A) High percentage of C3S and low percentage of C2S cause rapid hardening (B) High percentage of C3S and low percentage of C2S make the cement ... ) Low percentage of C3S and high percentage of C2S contribute to slow hardening (D) All the above

Last Answer : Answer: Option D

The cement whose strength is a little lower than the ordinary cement during the first three months but attains afterwards the same strength, is known as (A) Low-heat Portland cement (B) Rapid hardening Portland cement (C) Portland blast slag cement (D) Portland pozzolana cement

Description : The cement whose strength is a little lower than the ordinary cement during the first three months but attains afterwards the same strength, is known as (A) Low-heat Portland cement (B) Rapid hardening Portland cement (C) Portland blast slag cement (D) Portland pozzolana cement

Last Answer : Answer: Option A

For the construction of thin R.C.C. structures, the type of cement to be avoided, is (A) Ordinary Portland cement (B) Rapid hardening cement (C) Low heat cement (D) Blast furnace slag cement

Description : For the construction of thin R.C.C. structures, the type of cement to be avoided, is (A) Ordinary Portland cement (B) Rapid hardening cement (C) Low heat cement (D) Blast furnace slag cement

Last Answer : Answer: Option D

For construction of structures in sea water, the cement generally preferred to, is (A) Portland-pozzolana cement (B) Quick setting cement (C) Low heat Portland cement (D) Rapid hardening cement

Description : For construction of structures in sea water, the cement generally preferred to, is (A) Portland-pozzolana cement (B) Quick setting cement (C) Low heat Portland cement (D) Rapid hardening cement

Last Answer : Answer: Option A

For road pavements, the cement generally used, is (A) Ordinary Portland cement (B) Rapid hardening cement (C) Low heat cement (D) Blast furnace slag cement

Description : For road pavements, the cement generally used, is (A) Ordinary Portland cement (B) Rapid hardening cement (C) Low heat cement (D) Blast furnace slag cement

Last Answer : Answer: Option B

Name the type of cement from the following for canal linings: (A) Sulphate resisting cement (B) Rapid hardening cement (C) Quick setting cement (D) Pozzolana cement

Description : Name the type of cement from the following for canal linings: (A) Sulphate resisting cement (B) Rapid hardening cement (C) Quick setting cement (D) Pozzolana cement

Last Answer : Answer: Option A

Portland cement manufactured from pure white chalk and clay but free from iron-oxide, is known as (A) Quick setting cement (B) Rapid hardening cement (C) White cement (D) Low heat Portland cement

Description : Portland cement manufactured from pure white chalk and clay but free from iron-oxide, is known as (A) Quick setting cement (B) Rapid hardening cement (C) White cement (D) Low heat Portland cement

Last Answer : Answer: Option C

Which of the following cements is suitable for use in massive concrete structures such as large dams? (A) Ordinary Portland cement (B) Low heat cement (C) Rapid hardening cement (D) Sulphate resisting cement

Description : Which of the following cements is suitable for use in massive concrete structures such as large dams? (A) Ordinary Portland cement (B) Low heat cement (C) Rapid hardening cement (D) Sulphate resisting cement

Last Answer : Answer: Option B

Rapid hardening cement attains early strength due to (A) Larger proportion of lime grounded finer than normal cement (B) Lesser proportion of lime grounded coarser than normal cement (C) Lesser proportion of lime grounded finer than normal cement (D) Excess percentage of gypsum

Description : Rapid hardening cement attains early strength due to (A) Larger proportion of lime grounded finer than normal cement (B) Lesser proportion of lime grounded coarser than normal cement (C) Lesser proportion of lime grounded finer than normal cement (D) Excess percentage of gypsum

Last Answer : Answer: Option A

Which of the following statements is correct? (a) Sulphate resisting cement is particularly used for canal lining. (b) Low heat cement should not be used for thin concrete structures. (c) Rapid hardening cement should not be used for massive concrete structures (d) All of the above

Description : Which of the following statements is correct? (a) Sulphate resisting cement is particularly used for canal lining. (b) Low heat cement should not be used for thin concrete structures. (c) Rapid hardening cement should not be used for massive concrete structures (d) All of the above

Last Answer : (d) All of the above

Which of the following cements is expected to have the highest compressive strength after 3 days (a) Ordinary Portland cement (b) Rapid hardening cement (c) High alumina cement (d) Sulphate resisting cement.

Description : Which of the following cements is expected to have the highest compressive strength after 3 days (a) Ordinary Portland cement (b) Rapid hardening cement (c) High alumina cement (d) Sulphate resisting cement.

Last Answer : (c) High alumina cement

Rapid hardening cement is used (a) Where high early strength is desired (b) Where form work is to be removed as early as possible (c) For construction of road pavements. (d) All of the above

Description : Rapid hardening cement is used (a) Where high early strength is desired (b) Where form work is to be removed as early as possible (c) For construction of road pavements. (d) All of the above

Last Answer : (d) All of the above

For mass concrete work, the type of cement preferable is [ A ] Ordinary Portland cement [ B ] Rapid hardening cement [ C ] Low heat cement [ D ] Blast furnace slag cement

Description : For mass concrete work, the type of cement preferable is [ A ] Ordinary Portland cement [ B ] Rapid hardening cement [ C ] Low heat cement [ D ] Blast furnace slag cement

Last Answer : [ C ] Low heat cement

For road pavements, the cement generally used, is [ A ] Ordinary Portland cement [ B ] Rapid hardening cement [ C ] Low heat cement [ D ] Blast furnace slag cement

Description : For road pavements, the cement generally used, is [ A ] Ordinary Portland cement [ B ] Rapid hardening cement [ C ] Low heat cement [ D ] Blast furnace slag cement

Last Answer : [ A ] Ordinary Portland cement

This group of alumino-silicate minerals is widely used in making electrical insulators (1) Bauxite (2) Chrornite (3) Manganese (4) Mica

Description : This group of alumino-silicate minerals is widely used in making electrical insulators (1) Bauxite (2) Chrornite (3) Manganese (4) Mica

Last Answer : (4) Mica Explanation: Sheet mica is used principally in the electronic and electrical industries. Its usefulness in these applications is derived from its unique electrical and thermal insulating properties and ... it is a good electrical insulator at the same time as being a good thermal conductor.

This group of alumino-silicate minerals is widely used in making electrical insulators (1) Bauxite (2) Chromite (3) Manganese (4) Mica

Description : This group of alumino-silicate minerals is widely used in making electrical insulators (1) Bauxite (2) Chromite (3) Manganese (4) Mica

Last Answer : Mica

The presence of alkali oxides in alumino silicate ceramics is likely to result in dielectric breakdown due to

Description : The presence of alkali oxides in alumino silicate ceramics is likely to result in dielectric breakdown due to   (A) Polarization (B) Conductivity (C) Structural homogeneties (D) Ionization

Last Answer : The presence of alkali oxides in alumino silicate ceramics is likely to result in dielectric breakdown due to Conductivity 

The pH value of water is kept slightly less than 7 so that hydrochloride ions may combine with ammonia ions to form (A) Mono-chloramine (NHCl) (B) Di-chloramine (NH2Cl) (C) Nitrogen tri-chloramine (NCl3) (D) All the above

Description : The pH value of water is kept slightly less than 7 so that hydrochloride ions may combine with  ammonia ions to form  (A) Mono-chloramine (NHCl)  (B) Di-chloramine (NH2Cl)  (C) Nitrogen tri-chloramine (NCl3)  (D) All the above

Last Answer : (D) All the above

Which type of following cement is used for mass concrete work a) High Alumina cement b) Quick setting cement c) Rapid hardening cement d) Low heat cement*

Description : Which type of following cement is used for mass concrete work a) High Alumina cement b) Quick setting cement c) Rapid hardening cement d) Low heat cement*

Last Answer : d) Low heat cement*

Which cement should not be used for bridge slabs ro RCC frames a) OPC b) Portland Pozzolana cement * c) Portland furnace slag cement d) Rapid hardening cement

Description : Which cement should not be used for bridge slabs ro RCC frames a) OPC b) Portland Pozzolana cement * c) Portland furnace slag cement d) Rapid hardening cement

Last Answer : b) Portland Pozzolana cement *

Which gas is produced after the application of Calcium Carbide to the fruits, for rapid ripening? a. Methane b. Carbon-di-oxide c. Acetylene d. Ethylene

Description : Which gas is produced after the application of Calcium Carbide to the fruits, for rapid ripening? a. Methane b. Carbon-di-oxide c. Acetylene d. Ethylene

Last Answer : c. Acetylene