Select the incorrect statement (A) The loss of pre-stress is more in pre-tensioning system than in post-tensioning system. (B) Pre-tensioning system has greater certainty about its durability. (C) For heavy loads and large spans in buildings or bridges, post-tensioning system is cheaper than pre-tensioning system (D) None of the above

Select the incorrect statement
(A) The loss of pre-stress is more in pre-tensioning system than in post-tensioning system.
(B) Pre-tensioning system has greater certainty about its durability.
(C) For heavy loads and large spans in buildings or bridges, post-tensioning system is cheaper
than pre-tensioning system
(D) None of the above
by

1 Answer

Answer :

Answer: Option D
by

Related questions

Post tensioning system (A) Was widely used in earlier days (B) Is not economical and hence not generally used (C) Is economical for large spans and is adopted now a days (D) None of these

Description : Post tensioning system (A) Was widely used in earlier days (B) Is not economical and hence not generally used (C) Is economical for large spans and is adopted now a days (D) None of these

Last Answer : Answer: Option D

Which of the following losses of pre-stress occurs only in pre-tensioning and not in posttensioning? (A) Elastic shortening of concrete (B) Shrinkage of concrete (C) Creep of concrete (D) Loss due to frictio

Description : Which of the following losses of pre-stress occurs only in pre-tensioning and not in posttensioning? (A) Elastic shortening of concrete (B) Shrinkage of concrete (C) Creep of concrete (D) Loss due to friction

Last Answer : Answer: Option A

Beams of uniform strength are preferred to those of uniform section because these are economical for (A) Large spans (B) Heavy weights (C) Light weights (D) Short spans

Description : Beams of uniform strength are preferred to those of uniform section because these are economical for (A) Large spans (B) Heavy weights (C) Light weights (D) Short spans

Last Answer : (A) Large spans

An R.C.C. roof slab is designed as a two way slab if (A) It supports live loads in both directions (B) The ratio of spans in two directions is less than 2 (C) The slab is continuous over two supports (D) The slab is discontinuous at edges

Description : An R.C.C. roof slab is designed as a two way slab if (A) It supports live loads in both directions (B) The ratio of spans in two directions is less than 2 (C) The slab is continuous over two supports (D) The slab is discontinuous at edges

Last Answer : Answer: Option B

If l1 and l2 are the lengths of long and short spans of a two way slab simply supported on four edges and carrying a load w per unit area, the ratio of the loads split into w1 and w2acting on strips parallel to l2 and l1 is (A) w1/w2 = l2/l1 (B) w1/w2 = (l2/l1)² (C) w1/w2 = (l2/l1)3 (D) w1/w2 = (l2/l1)

Description : If l1 and l2 are the lengths of long and short spans of a two way slab simply supported on four edges and carrying a load w per unit area, the ratio of the loads split into w1 and w2acting on strips parallel to l2 and l1 is (A) ... l1 (B) w1/w2 = (l2/l1)² (C) w1/w2 = (l2/l1)3 (D) w1/w2 = (l2/l1)

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The roof slabs of multi-storeyed buildings are constructed monolithically to carry the various floor loads (B) The beams of multi-storeyed buildings rest on girders and are the main load transferring members to the columns (C) The slab is spanned across the secondary beams provided between the main beams (D) All of these

Description : Pick up the correct statement from the following: (A) The roof slabs of multi-storeyed buildings are constructed monolithically to carry the various floor loads (B) The beams of multi-storeyed ... slab is spanned across the secondary beams provided between the main beams (D) All of these

Last Answer : Answer: Option D

Select the incorrect from the following. The combinations of loads for serviceability conditions should be [ A ] 1.0 DL + 1.0 LL [ B ] 1.0 DL + 1.0 WL [ C ] 1.0 DL + 0.8 LL + 0.8 WL [ D ] 0.8 DL + 0.8 LL + 0.8 WL

Description : Select the incorrect from the following. The combinations of loads for serviceability conditions should be [ A ] 1.0 DL + 1.0 LL [ B ] 1.0 DL + 1.0 WL [ C ] 1.0 DL + 0.8 LL + 0.8 WL [ D ] 0.8 DL + 0.8 LL + 0.8 WL

Last Answer : [ D ] 0.8 DL + 0.8 LL + 0.8 WL

Assertion A : The load factor for live load is greater than that for dead load. Reason R : The live loads are more uncertain than dead loads. Select your answer based on the coding system given below: (A) Both A and R is true and R is the correct explanation of A (B) Both A and R is true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true

Description : Assertion A : The load factor for live load is greater than that for dead load. Reason R : The live loads are more uncertain than dead loads. Select your answer based on the coding system given below: (A) Both A ... explanation of A (C) A is true but R is false (D) A is false but R is true

Last Answer : Answer: Option A

Pre-stress loss due to friction occurs (A) Only in post-tensioned beams (B) Only in pre-tensioned beams (C) In both post-tensioned and pre-tensioned beams (D) None of the above

Description : Pre-stress loss due to friction occurs (A) Only in post-tensioned beams (B) Only in pre-tensioned beams (C) In both post-tensioned and pre-tensioned beams (D) None of the above

Last Answer : Answer: Option A

Maximum distance apart of trolley refuges on bridges with main spans of 100metre or more is i. 50 mtr j. 100 mtr k. 200 mtr l. a refuge over each pair*

Description : Maximum distance apart of trolley refuges on bridges with main spans of 100metre or more is i. 50 mtr j. 100 mtr k. 200 mtr l. a refuge over each pair*

Last Answer : l. a refuge over each pair*

Which bridge, one of the oldest roadway bridges in the United States, was completed in 1883 and spans the East River? -Geography

Description : Which bridge, one of the oldest roadway bridges in the United States, was completed in 1883 and spans the East River? -Geography

Last Answer : The Brooklyn Bridge

For railway bridges with spans in excess of 30.5m, generally provided with a) deck type girders b) open web through girders* c) semi through girders d) shallow type girders

Description : For railway bridges with spans in excess of 30.5m, generally provided with a) deck type girders b) open web through girders* c) semi through girders d) shallow type girders

Last Answer : b) open web through girders*

The date of painting of steel work should be painted in white on the out side of the left girder a) of the 1st span only b) first span only but on all spans for Imp. Bridges* c) of the all spans d) None of the above

Description : The date of painting of steel work should be painted in white on the out side of the left girder a) of the 1st span only b) first span only but on all spans for Imp. Bridges* c) of the all spans d) None of the above

Last Answer : b) first span only but on all spans for Imp. Bridges*

Select the incorrect statement. (A) In a direct shear box test, the plane of shear failure is predetermined (B) Better control is achieved on the drainage of the soil in a triaxial compression test (C) Stress distribution on the failure plane in the case of triaxial compression test is uniform (D) Unconfined compression test can be carried out on all types of soils

Description : Select the incorrect statement. (A) In a direct shear box test, the plane of shear failure is predetermined (B) Better control is achieved on the drainage of the soil in a triaxial compression ... compression test is uniform (D) Unconfined compression test can be carried out on all types of soils

Last Answer : Answer: Option D

Select the incorrect statement from the following In eccentrically loaded columns, [ A ] The tensile strength of concrete is ignored [ B ] Design stress – strain curve for steel in compression is the same as in tension [ C ] The strain at different points in the section will be same [ D ] Plane section remain plane even after bending

Description : Select the incorrect statement from the following In eccentrically loaded columns, [ A ] The tensile strength of concrete is ignored [ B ] Design stress - strain curve for steel in compression is the ... different points in the section will be same [ D ] Plane section remain plane even after bending

Last Answer : [ C ] The strain at different points in the section will be same

The columns of multi-storeyed buildings are designed to withstand the forces due to (A) Dead loads (B) Live loads (C) Wind loads (D) All of these

Description : The columns of multi-storeyed buildings are designed to withstand the forces due to (A) Dead loads (B) Live loads (C) Wind loads (D) All of these

Last Answer : Option D

For what type of structures do you recommend post-tensioning?

Description : For what type of structures do you recommend post-tensioning?

Last Answer : 1) High rise buildings. In long span slab where beam is not provided & the slab of assembly hall, cinema theaters etc. like structure where the distance between columns are more, then post ... Post Tensioning is used extensively for slabs on grade where soils are likely to move (expansive soils)

Pick up the correct statement from the following: (A) English bond is used for brick masonry to support heavy loads (B) Double-Flemish bond is suitable for brick masonry to give uniform face appearance (C) The stretcher bond is used for the construction of half brick masonry brick (D) All the above

Description : Pick up the correct statement from the following: (A) English bond is used for brick masonry to support heavy loads (B) Double-Flemish bond is suitable for brick masonry to give uniform face ... The stretcher bond is used for the construction of half brick masonry brick (D) All the above

Last Answer : Answer: Option D

You are asked to design and supervise a truss for a factory to have spans 6 m to 9 m. The type of the truss you will use, is (A) Mansard truss (B) Queen post truss (C) King post truss (D) Collar truss

Description : You are asked to design and supervise a truss for a factory to have spans 6 m to 9 m. The type of the truss you will use, is (A) Mansard truss (B) Queen post truss (C) King post truss (D) Collar truss

Last Answer : Answer: Option C

Select the correct statement (A) Elastic modulus of high tensile steel is nearly the same as that of mild steel (B) Elastic modulus of high tensile steel is more than that of mild steel (C) Carbon percentage in high carbon steel is less than that in mild steel (D) High tensile steel is cheaper than mild steel

Description : Select the correct statement (A) Elastic modulus of high tensile steel is nearly the same as that of mild steel (B) Elastic modulus of high tensile steel is more than that of mild steel (C) ... high carbon steel is less than that in mild steel (D) High tensile steel is cheaper than mild steel

Last Answer : Answer: Option A

Select the correct statement. A) Contour interval on any map is kept constant. (B) Direct method of contouring is cheaper than indirect method. (C) Intervisibility of points on a contour map cannot be ascertained. (D) Slope of a hill cannot be determined with the help of contours.

Description : Select the correct statement. . A) Contour interval on any map is kept constant. (B) Direct method of contouring is cheaper than indirect method. (C) Intervisibility of points on a contour map cannot be ascertained. (D) Slope of a hill cannot be determined with the help of contours.

Last Answer : (A) Contour interval on any map is kept constant.

Singing of telephone wires in the wind occurs due to : (a) Vibrations caused by birds as they sit on or get off, the wires (b) Tensioning at the ends (c) Magnus effect (d) Generation of Karman Vortex street

Description : Singing of telephone wires in the wind occurs due to : (a) Vibrations caused by birds as they sit on or get off, the wires (b) Tensioning at the ends (c) Magnus effect (d) Generation of Karman Vortex street

Last Answer : (d) Generation of Karman Vortex street

The claim for escalation for price and export incentive shall be deemed to be income of …………. a) Previous year, if reasonable certainty for realization is involved b) Current year, if realization certainty involved c) At the option of the assessee stating valid reasons d) All of the options are incorrect

Description : The claim for escalation for price and export incentive shall be deemed to be income of . a) Previous year, if reasonable certainty for realization is involved b) Current year, if realization ... c) At the option of the assessee stating valid reasons d) All of the options are incorrect

Last Answer : a) Previous year, if reasonable certainty for realization is involved

How might this flooding threaten infrastructure (roads bridges buildings power lines etc.)?

Description : How might this flooding threaten infrastructure (roads bridges buildings power lines etc.)?

Last Answer : Feel Free to Answer

Which one of the following activities is not correct as applicable to brick corbels? (A) The maximum projection of the corbel should not be more than the thickness of the wall (B) The maximum projection of each corbel course should be limited to a quarter brick at a time (C) The discontinuous corbels are used to carry heavy concentrated loads (D) Stretcher bond is generally used for the construction of brick corbel

Description : Which one of the following activities is not correct as applicable to brick corbels? (A) The maximum projection of the corbel should not be more than the thickness of the wall (B) The ... to carry heavy concentrated loads (D) Stretcher bond is generally used for the construction of brick corbel

Last Answer : Answer: Option D

The entire range of the electromagnetic spectrum spans a large spectrum of wave lengths varying from: (A) 10-10 to 106 m (B) 10-8 to 106 m (C) 10-10 to 1010 m (D) 10-8 to 108 m

Description : The entire range of the electromagnetic spectrum spans a large spectrum of wave lengths varying from: (A) 10-10 to 106 m (B) 10-8 to 106 m (C) 10-10 to 1010 m (D) 10-8 to 108 m

Last Answer : Answer: Option A

Residential buildings are treated as (A) Light construction (B) Heavy construction (C) Industrial construction (D) Private construction

Description : Residential buildings are treated as (A) Light construction (B) Heavy construction (C) Industrial construction (D) Private construction

Last Answer : (A) Light construction

A pre-stressed rectangular beam which carries two concentrated loads W at L/3 from either end, is provided with a bent tendon with tension P such that central one-third portion of the tendon remains parallel to the longitudinal axis, the maximum dip h is (A) WL/P (B) WL/2P (C) WL/3P (D) WL/4P

Description : A pre-stressed rectangular beam which carries two concentrated loads W at L/3 from either end, is provided with a bent tendon with tension P such that central one-third portion of the tendon remains parallel to the longitudinal axis, the maximum dip h is (A) WL/P (B) WL/2P (C) WL/3P (D) WL/4P

Last Answer : Answer: Option C

Pick up the incorrect statement from the following: (A) Iron salts produce heavy flocks and hence remove more suspended matter (B) Iron salts remove hydrogen sulphides (C) Iron salts can be used over a limited range of pH values (D) Iron salts impart corrosiveness to water

Description : Pick up the incorrect statement from the following: (A) Iron salts produce heavy flocks and hence remove more suspended matter (B) Iron salts remove hydrogen sulphides (C) Iron salts can be used over a limited range of pH values (D) Iron salts impart corrosiveness to water

Last Answer : (C) Iron salts can be used over a limited range of pH values

A pre-stressed concrete member is preferred because (A) Its dimensions are not decided from the diagonal tensile stress (B) Large size of long beams carrying large shear force need not be adopted (C) Removal of cracks in the members due to shrinkage (D) All the above

Description : A pre-stressed concrete member is preferred because (A) Its dimensions are not decided from the diagonal tensile stress (B) Large size of long beams carrying large shear force need not be adopted (C) Removal of cracks in the members due to shrinkage (D) All the above

Last Answer : Answer: Option D

After pre-stressing process is completed, a loss of stress is due to (A) Shrinkage of concrete (B) Elastic shortening of concrete (C) Creep of concrete (D) All the above

Description : After pre-stressing process is completed, a loss of stress is due to (A) Shrinkage of concrete (B) Elastic shortening of concrete (C) Creep of concrete (D) All the above

Last Answer : Answer: Option D

Though the effective depth of a T-beam is the distance between the top compression edge to the centre of the tensile reinforcement, for heavy loads, it is taken as (A) 1/8th of the span (B) 1/10th of the span (C) 1/12th of the span (D) 1/16th of the span

Description : Though the effective depth of a T-beam is the distance between the top compression edge to the centre of the tensile reinforcement, for heavy loads, it is taken as (A) 1/8th of the span (B) 1/10th of the span (C) 1/12th of the span (D) 1/16th of the span

Last Answer : Answer: Option C

The type of bond provided in brick masonry for carrying heavy loads is (A) Single Flemish bond (B) Double Flemish bond (C) English bond (D) Zigzag bond

Description : The type of bond provided in brick masonry for carrying heavy loads is (A) Single Flemish bond (B) Double Flemish bond (C) English bond (D) Zigzag bond

Last Answer : Answer: Option C

Grillage foundation (A) Is used to transfer heavy structural loads from steel columns to a soil having low bearing capacity (B) Is light and economical (C) Does not require deep cutting as the required base area with required pressure intensity is obtained at a shallow depth (D) All the above

Description : Grillage foundation (A) Is used to transfer heavy structural loads from steel columns to a soil having low bearing capacity (B) Is light and economical (C) Does not require deep cutting as the required base area with required pressure intensity is obtained at a shallow depth (D) All the above

Last Answer : Answer: Option D

The type of footing which is used to transmit heavy loads through steel columns is (A) Raft foundation (B) Grillage foundation (C) Well foundation (D) Isolated footing

Description : The type of footing which is used to transmit heavy loads through steel columns is (A) Raft foundation (B) Grillage foundation (C) Well foundation (D) Isolated footing

Last Answer : Option B

If a manager at Wipro wants to award a contract for printing the company's promotional literature and has obtained quotations from several printers, the manager can select a printer and know with ______ what the printing should cost. (a) Ambiguity ; (b) Risk ; (c) Uncertainty ; (d) Certainty

Description : If a manager at Wipro wants to award a contract for printing the company's promotional literature and has obtained quotations from several printers, the manager can select a printer and know with ______ what the printing should cost. (a) Ambiguity ; (b) Risk ; (c) Uncertainty ; (d) Certainty

Last Answer :  (d) Certainty 

Select the incorrect statement. Effective angle of shearing resistance (A) Increases as the size of particles increases (B) Increases as the soil gradation improves (C) Is limited to a maximum value of 45° (D) Is rarely more than 30° for fine grained soil

Description : Select the incorrect statement. Effective angle of shearing resistance (A) Increases as the size of particles increases (B) Increases as the soil gradation improves (C) Is limited to a maximum value of 45° (D) Is rarely more than 30° for fine grained soil

Last Answer : (C) Is limited to a maximum value of 45°

Choose the incorrect statement from the following: (a) The nuclear becomes weak if the nucleus contains too many protons compared to the number of neutrons (b) The nuclear force becomes weak if the nucleus contains too many neutrons compared to the number of protons (c) Nuclei with atomic number greater than 82 show a tendency to disintegrate (d) The nuclear force becomes very strong if the nucleus contains a large number of nucleons.

Description : Choose the incorrect statement from the following: (a) The nuclear becomes weak if the nucleus contains too many protons compared to the number of neutrons (b) The nuclear force becomes weak if the ... (d) The nuclear force becomes very strong if the nucleus contains a large number of nucleons.

Last Answer : Ans:(d)

Select the incorrect statement from the following [ A ] Reinforcing bars in a column should not be less than 12 mm in diameter [ B ] The number of longitudinal bars in a circular column should not exceed four [ C ] The minimum percentage of longitudinal steel in columns should be 0.8% [ D ] None of the above

Description : Select the incorrect statement from the following [ A ] Reinforcing bars in a column should not be less than 12 mm in diameter [ B ] The number of longitudinal bars in a circular column should not ... The minimum percentage of longitudinal steel in columns should be 0.8% [ D ] None of the above

Last Answer : [ B ] The number of longitudinal bars in a circular column should not exceed four

Select the incorrect statement [ A ] R.C.C has better fire resistance than steel [ B ] R.C.C. structure is economical than steel structure [ C ] Strength of concrete decreases as age increases [ D ] R.C.C can be used for under water and marine structures

Description : Select the incorrect statement [ A ] R.C.C has better fire resistance than steel [ B ] R.C.C. structure is economical than steel structure [ C ] Strength of concrete decreases as age increases [ D ] R.C.C can be used for under water and marine structures

Last Answer : [ C ] Strength of concrete decreases as age increases

Select the incorrect statement (A) Lean mixes bleed more as compared to rich ones. (B) Bleeding can be minimized by adding pozzolana finer aggregate (C) Bleeding can be increased by addition 'of calcium chloride (D) None of the above

Description : Select the incorrect statement (A) Lean mixes bleed more as compared to rich ones. (B) Bleeding can be minimized by adding pozzolana finer aggregate (C) Bleeding can be increased by addition 'of calcium chloride (D) None of the above

Last Answer : Answer: Option D

The deficiency in rain catch due to vertical acceleration of air forced upward over the gauge, is (A) Greater for heavy rain (B) Greater for lighter rain (C) Greater for large drops (D) Lesser for small rain drops

Description : The deficiency in rain catch due to vertical acceleration of air forced upward over the gauge, is (A) Greater for heavy rain (B) Greater for lighter rain (C) Greater for large drops (D) Lesser for small rain drops

Last Answer : Answer: Option B

Pick up the correct statement from the following: (A) Water cement paste hardens due to hydration (B) During hardening cement binds the aggregates together (C) Cement provides strength, durability and water tightness to the concrete (D) All the above

Description : Pick up the correct statement from the following: (A) Water cement paste hardens due to hydration (B) During hardening cement binds the aggregates together (C) Cement provides strength, durability and water tightness to the concrete (D) All the above

Last Answer : Answer: Option D

Pick up the incorrect statement from the following. The intensity of horizontal shear stress at the elemental part of a beam section, is directly proportional to (A) Shear force (B) Area of the section (C) Distance of the C.G. of the area from its neutral axis (D) Moment of the beam section about its neutral axis

Description : Pick up the incorrect statement from the following. The intensity of horizontal shear stress at the elemental part of a beam section, is directly proportional to (A) Shear force (B) Area of the section ... . of the area from its neutral axis (D) Moment of the beam section about its neutral axis

Last Answer : Answer: Option D

Select the incorrect statement. (A) Earliest start of an activity is the early event time of the node it leaves. (B) Latest finish of an activity is the late event time of the node it enters. (C) Latest start of an activity is its latest finish minus its duration. (D) None of the above

Description : Select the incorrect statement. (A) Earliest start of an activity is the early event time of the node it leaves. (B) Latest finish of an activity is the late event time of the node it enters. (C) Latest start of an activity is its latest finish minus its duration. (D) None of the above

Last Answer : (D) None of the above

Pick out the correct statement. (A) For identical gas flow rates, less pressure drop occurs through a plate tower than through a packed tower (B) Plate column can handle greater liquid loads without flooding than packed column, but the liquid hold up is more in the case of plate column (C) For the same duty, plate columns weigh less than packed columns (D) All (A), (B) and (C)

Description : Pick out the correct statement. (A) For identical gas flow rates, less pressure drop occurs through a plate tower than through a packed tower (B) Plate column can handle greater liquid loads without flooding than packed ... duty, plate columns weigh less than packed columns (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The direct shear test suffers from the following disadvantage: (A) Drain condition cannot be controlled (B) Pore water pressure cannot be measured (C) Shear stress on the failure plane is not uniform (D) The area under the shear and vertical loads does not remain constant throughout the test

Description : The direct shear test suffers from the following disadvantage: (A) Drain condition cannot be controlled (B) Pore water pressure cannot be measured (C) Shear stress on the failure plane is not uniform (D) The area under the shear and vertical loads does not remain constant throughout the test

Last Answer : Answer: Option C

In cement concrete pavements, tensile stress is due to: (A) Bending or deflection under wheel loads (B) Difference in temperature of the top and bottom of pavement (C) Contraction of slab during falling temperature (D) All the above

Description : In cement concrete pavements, tensile stress is due to: (A) Bending or deflection under wheel loads (B) Difference in temperature of the top and bottom of pavement (C) Contraction of slab during falling temperature (D) All the above

Last Answer : Answer: Option D

For an I beam, the shape factor is 1.12. If the allowable stress (with factor of safety in bending as 1.5) is increased by 20% for wind and earthquake loads, the modified load factor is (a) 1.10 (b) 1.25 (c) 1.35 (d) 1.40

Description : For an I beam, the shape factor is 1.12. If the allowable stress (with factor of safety in bending as 1.5) is increased by 20% for wind and earthquake loads, the modified load factor is (a) 1.10 (b) 1.25 (c) 1.35 (d) 1.40

Last Answer : (d) 1.40

Pick up the incorrect statement from the following: Tensile reinforcement bars of a rectangular beam (A) Are curtailed if not required to resist the bending moment (B) Are bent up at suitable places to serve as shear reinforcement (C) Are bent down at suitable places to serve as shear reinforcement (D) Are maintained at bottom to provide at least local bond stress

Description : Pick up the incorrect statement from the following: Tensile reinforcement bars of a rectangular beam (A) Are curtailed if not required to resist the bending moment (B) Are bent up at suitable ... to serve as shear reinforcement (D) Are maintained at bottom to provide at least local bond stress

Last Answer : Answer: Option C