Select the correct statement. A) Contour interval on any map is kept constant. (B) Direct method of contouring is cheaper than indirect method. (C) Intervisibility of points on a contour map cannot be ascertained. (D) Slope of a hill cannot be determined with the help of contours.

Select the correct statement. .
A) Contour interval on any map is kept constant.
(B) Direct method of contouring is cheaper than indirect method.
(C) Intervisibility of points on a contour map cannot be ascertained.
(D) Slope of a hill cannot be determined with the help of contours.
by

1 Answer

Answer :

(A) Contour interval on any map is kept constant.
by

Related questions

In the cross-section method of indirect contouring, the spacing of cross-sections depends upon (i) Contour interval (ii) Scale of plan (iii) Characteristics of ground The correct answer is (A) Only (i) (B) (i) and (ii) (C) (ii) and (iii) (D) (i), (ii) and (iii)

Description : In the cross-section method of indirect contouring, the spacing of cross-sections depends upon (i) Contour interval (ii) Scale of plan (iii) Characteristics of ground The correct answer is (A) Only (i) (B) (i) and (ii) (C) (ii) and (iii) (D) (i), (ii) and (iii)

Last Answer : (D) (i), (ii) and (iii)

In direct method of contouring, the process of locating or identifying points lying on a contour is called (A) Ranging (B) Centring (C) Horizontal control (D) Vertical control

Description : In direct method of contouring, the process of locating or identifying points lying on a contour is called (A) Ranging (B) Centring (C) Horizontal control (D) Vertical control

Last Answer : (D) Vertical control

Contour interval is (A) The vertical distance between two consecutive contours (B) The horizontal distance between two consecutive contours (C) The vertical distance between two points on same contour (D) The horizontal distance between two points on same contour

Description : Contour interval is (A) The vertical distance between two consecutive contours (B) The horizontal distance between two consecutive contours (C) The vertical distance between two points on same contour (D) The horizontal distance between two points on same contour

Last Answer : (A) The vertical distance between two consecutive contours

For preparation of a contour plan for a route survey (A) Method of squares is used (B) Method of trace contour is used (C) Method of cross profile is used (D) Indirect method of contouring is used

Description : For preparation of a contour plan for a route survey  (A) Method of squares is used  (B) Method of trace contour is used  (C) Method of cross profile is used  (D) Indirect method of contouring is used 

Last Answer : (C) Method of cross profile is used 

The constant vertical distance between two adjacent contours, is called (A) Horizontal interval (B) Horizontal equivalent (C) Vertical equivalent (D) Contour interval

Description : The constant vertical distance between two adjacent contours, is called (A) Horizontal interval (B) Horizontal equivalent (C) Vertical equivalent (D) Contour interval

Last Answer : (D) Contour interval

Pick up the correct statement from the following (A) The contour lines having the same elevation cannot unite and continue as one line (B) A contour can not end abruptly, but must ultimately close itself not necessarily within the limits of map (C) The direction of steepest slope at a point on a contour is at right angles to the contour (D) All the above

Description : Pick up the correct statement from the following (A) The contour lines having the same elevation cannot unite and continue as one line (B) A contour can not end abruptly, but must ultimately close itself not ... slope at a point on a contour is at right angles to the contour (D) All the above

Last Answer : (D) All the above

Select the correct statement. (A) A contour is not necessarily a closed curve. B) A contour represents a ridge line if the concave side of lower value contour lies towards the higher value contour (C) Two contours of different elevations do not cross each other except in case of an overhanging cliff (D) All of the above statements are correct

Description : Select the correct statement. (A) A contour is not necessarily a closed curve. B) A contour represents a ridge line if the concave side of lower value contour lies towards the higher value contour ... each other except in case of an overhanging cliff (D) All of the above statements are correct

Last Answer : (C) Two contours of different elevations do not cross each other except in case of an overhanging clif

Accuracy of elevation of various points obtained from contour map is limited to (A) ½ of the contour interval (B) ¼ th of the contour interval (C) rd of the contour interval (D) th of the contour interval

Description : Accuracy of elevation of various points obtained from contour map is limited to (A) ½ of the contour interval (B) ¼ th of the contour interval (C) rd of the contour interval (D) th of the contour interval

Last Answer : (A) ½ of the contour interval

A closed contour line with two or more higher contours inside it will represent a (a) Depression (b) Hill (c) Cave (d) Well

Description : A closed contour line with two or more higher contours inside it will represent a (a) Depression (b) Hill (c) Cave (d) Well

Last Answer : (b) Hill

Contour interval on a map sheet denotes (a) Vertical distance of contour lines above the datum plane (b) Vertical distance between two successive contour lines (c) Slope distance between two successive contour lines (d) Horizontal distance between two successive contour lines

Description : Contour interval on a map sheet denotes (a) Vertical distance of contour lines above the datum plane (b) Vertical distance between two successive contour lines (c) Slope distance between two successive contour lines (d) Horizontal distance between two successive contour lines

Last Answer : (b) Vertical distance between two successive contour lines

State Direct & indirect method of contouring.Explain tacheometric method.

Description : State Direct & indirect method of contouring.Explain tacheometric method.

Last Answer : Method of contouring are: 1.Direct method 2 Indirect methods which include a)by cross section b)by squares c) tachometric contouring method. Tachometric contouring method. 1.This method ... calculated by tacheometry formulae. 4 The survey is plotted and then contour lines are interpolated. 

In a contour map, if contours are crossing each other, what will be nature of topography? Draw the sketch to support your answer.

Description : In a contour map, if contours are crossing each other, what will be nature of topography? Draw the sketch to support your answer.

Last Answer : If contours are crossing or intersecting each other, then there is overhanging cliff as shown in figure 1 below.

The suitable contour interval for a map with scale 1 : 10000 is (A) 2 m (B) 5 m (C) 10 m (D) 20 m

Description : The suitable contour interval for a map with scale 1 : 10000 is (A) 2 m (B) 5 m (C) 10 m (D) 20 m

Last Answer : (A) 2 m

Contour interval is (A) Inversely proportional to the scale of the map (B) Directly proportional to the flatness of ground (C) Larger for accurate works (D) Larger if the time available is more

Description : Contour interval is (A) Inversely proportional to the scale of the map (B) Directly proportional to the flatness of ground (C) Larger for accurate works (D) Larger if the time available is more

Last Answer : (A) Inversely proportional to the scale of the map

The disconnected lines drawn on a map for showing slope- (1) Bench marks (2) Contours (3) Form lines (4) Hachure

Description : The disconnected lines drawn on a map for showing slope- (1) Bench marks (2) Contours (3) Form lines (4) Hachure

Last Answer : (4) Hachure Explanation: Hachures are short disconnected lines drawn on the map to depict the slope of the ground surface. They are drawn in rows; each row being disconnected from the other. They ... gentler slopes. Hachures are not drawn for leveled areas, such as flat valley or a plateau top.

The disconnected lines drawn on a map for showing slope (1) Bench marks (2) Contours (3) Form lines (4) Hachure

Description : The disconnected lines drawn on a map for showing slope (1) Bench marks (2) Contours (3) Form lines (4) Hachure

Last Answer : Hachure

Pick up the correct statement from the following: (A) Detailed survey is carried out for a strip of land about 30 m at sharp curves (B) Levels are taken along the trace cut at an interval of 20 m (C) Contour interval is generally adopted at 2 metres vertical interval (D) All the above

Description : Pick up the correct statement from the following: (A) Detailed survey is carried out for a strip of land about 30 m at sharp curves (B) Levels are taken along the trace cut at an interval of 20 m (C) Contour interval is generally adopted at 2 metres vertical interval (D) All the above

Last Answer : Answer: Option D

An imaginary line lying throughout the surface of ground and preserving a constant inclination to the horizontal is known as (A) Contour line (B) Horizontal equivalent (C) Contour interval (D) Contour gradient

Description : An imaginary line lying throughout the surface of ground and preserving a constant inclination to the horizontal is known as (A) Contour line (B) Horizontal equivalent (C) Contour interval (D) Contour gradient

Last Answer : (D) Contour gradient

is a method of ploughing in which the soil broken and turn along the contours. a. Normal ploughing c. Contour ploughing b. Sub soil plough. d. Disc plough

Description : is a method of ploughing in which the soil broken and turn along the contours. a. Normal ploughing c. Contour ploughing b. Sub soil plough. d. Disc plough

Last Answer : Contour ploughing

Direct method of contouring is (A) A quick method (B) Adopted for large surveys only(C) Most accurate method (D) Suitable for hilly terrains

Description : Direct method of contouring is (A) A quick method (B) Adopted for large surveys only (C) Most accurate method (D) Suitable for hilly terrains

Last Answer : (C) Most accurate method

Which of the following methods of contouring is most suitable for a hilly terrain? (A) Direct method (B) Square method (C) Cross-sections method (D) Tachometric method

Description : Which of the following methods of contouring is most suitable for a hilly terrain? (A) Direct method (B) Square method (C) Cross-sections method (D) Tachometric method

Last Answer : (D) Tachometric method

The representation of general topography of a very flat terrain is possible only (A) By drawing contours at large interval (B) By drawing contours at small interval (C) By giving spot levels at large interval (D) By giving spot levels to salient features at close interval

Description : The representation of general topography of a very flat terrain is possible only (A) By drawing contours at large interval (B) By drawing contours at small interval (C) By giving spot levels at large interval (D) By giving spot levels to salient features at close interval

Last Answer : (D) By giving spot levels to salient features at close interval

Draw neat sketch of contour for the following i)Hill ii) Valley iii)Gentle Slope iv) Ridge Line

Description : Draw neat sketch of contour for the following i)Hill ii) Valley iii)Gentle Slope iv) Ridge Line 

Last Answer : i)Hill ii) Valley iii)Gentle Slope iv) Ridge Line 

Density of each compacted layer should be ascertained by taking soil samples on either side of Central Line at a) 5 meter interval b) 10 meter interval* c) 12 meter interval d) 15 meter internal

Description : Density of each compacted layer should be ascertained by taking soil samples on either side of Central Line at a) 5 meter interval b) 10 meter interval* c) 12 meter interval d) 15 meter internal

Last Answer : b) 10 meter interval*

Closed contours of decreasing values towards their centre, represent (A) A hill (B) A depression (C) A saddle or pass (D) A river bed

Description : Closed contours of decreasing values towards their centre, represent  (A) A hill  (B) A depression  (C) A saddle or pass  (D) A river bed

Last Answer : (B) A depression 

Explain direct method of contouring.

Description : Explain direct method of contouring.

Last Answer : Direct method of contouring - In this method of contouring, the contours of required reduced level are plotted on ground itself. The procedure of direct method of contouring is as follows. ... identical coloured pegs, we get the required contours on ground by this direct method of contouring. 

The height of formation depends upon the a) Ground contours and the gradient adopted* b) Ground contour only c) Gradient adopted only d) Rainfall intensity over the year

Description : The height of formation depends upon the a) Ground contours and the gradient adopted* b) Ground contour only c) Gradient adopted only d) Rainfall intensity over the year

Last Answer : a) Ground contours and the gradient adopted*

During levelling if back sight is more than foresight (A) The forward staff is at lower point (B) The back staff is at lower point (C) The difference in level, cannot be ascertained (D) None of these

Description : During levelling if back sight is more than foresight (A) The forward staff is at lower point (B) The back staff is at lower point (C) The difference in level, cannot be ascertained (D) None of these

Last Answer : (B) The back staff is at lower point

On a hydrographic map, the following feature is shown: (A) High and low water lines (B) Depth contours (C) Land and water areas (D) All the above

Description : On a hydrographic map, the following feature is shown: (A) High and low water lines (B) Depth contours (C) Land and water areas (D) All the above

Last Answer : (D) All the above

Regarding plane-table survey, which of the following statements does not hold? (a) All the plotting work including contouring can be done in the field (b) It is quite suitable for small scale survey (c) Less number of control points are required (d) It can be done in all seasons

Description : Regarding plane-table survey, which of the following statements does not hold? (a) All the plotting work including contouring can be done in the field (b) It is quite suitable for small scale survey (c) Less number of control points are required (d) It can be done in all seasons

Last Answer : (d) It can be done in all seasons

Select the correct statement (A) Elastic modulus of high tensile steel is nearly the same as that of mild steel (B) Elastic modulus of high tensile steel is more than that of mild steel (C) Carbon percentage in high carbon steel is less than that in mild steel (D) High tensile steel is cheaper than mild steel

Description : Select the correct statement (A) Elastic modulus of high tensile steel is nearly the same as that of mild steel (B) Elastic modulus of high tensile steel is more than that of mild steel (C) ... high carbon steel is less than that in mild steel (D) High tensile steel is cheaper than mild steel

Last Answer : Answer: Option A

State the methods of locating contours and explain direct method.

Description : State the methods of locating contours and explain direct method.

Last Answer : Methods of locating contours :- 1) Direct method 2) Indirect method i) By cross section ii) By Squares (Block Contouring) iii) Tachometric Method Direct method of contouring:- In ... identical coloured pegs, we get the required contours on ground by this direct method of contouring.

On a topographic map, lines that connect points of the same elevation are termed: w) benchmarks x) bathymetric lines y) contour lines z) isobars

Description : On a topographic map, lines that connect points of the same elevation are termed: w) benchmarks x) bathymetric lines y) contour lines z) isobars

Last Answer : ANSWER: Y -- CONTOUR LINES

The soil conservation method in which mountain slope is cut into step is – (1) Contour ploughing (2) Cover planting (3) Strip cropping (4) Terracing

Description : The soil conservation method in which mountain slope is cut into step is – (1) Contour ploughing (2) Cover planting (3) Strip cropping (4) Terracing

Last Answer : (4) Terracing Explanation: In agriculture, a terist is a piece of sloped plane that has been landscaped into a series of successively receding flat surfaces or platforms, which resemble steps, for ... and surface run off and are effective for growing crops requiring much water, such as rice.

The soil conservation method in which mountain slope is cut into step is (1) Contour ploughing (2) Cover planting (3) Strip cropping (4) Terracing

Description : The soil conservation method in which mountain slope is cut into step is (1) Contour ploughing (2) Cover planting (3) Strip cropping (4) Terracing

Last Answer : Terracing

The method generally preferred to for contouring an undulating area, is (A) Chain surveying (B) Plane table surveying (C) Tacheometrical surveying (D) Compass surveying

Description : The method generally preferred to for contouring an undulating area, is (A) Chain surveying (B) Plane table surveying (C) Tacheometrical surveying (D) Compass surveying

Last Answer : (C) Tacheometrical surveying

Contour lines of different elevations can unite to form one line, only in the case of (A) A vertical cliff (B) A saddle (C) A water shed line (D) A hill top

Description : Contour lines of different elevations can unite to form one line, only in the case of  (A) A vertical cliff  (B) A saddle  (C) A water shed line  (D) A hill top 

Last Answer : (A) A vertical cliff 

Two hill tops and 20 km apart are intervened by a third top . If the top most contour of the three hill tops are of the same value, state whether the line of sight AB (A) Passes clear of hill top C (B) Passes below the hill top C(C) Grazes the hill top C(D) None of these

Description : Two hill tops and 20 km apart are intervened by a third top . If the top most contour of the three hill tops are of the same value, state whether the line of sight AB (A) Passes clear of hill top C (B) Passes below the hill top C (C) Grazes the hill top C (D) None of these

Last Answer : (B) Passes below the hill top C

Location of contour gradient for a high way is best set out from (A) Ridge down the hill (B) Saddle down the hill (C) Bottom to the ridge (D) Bottom to the saddle

Description : Location of contour gradient for a high way is best set out from (A) Ridge down the hill (B) Saddle down the hill (C) Bottom to the ridge (D) Bottom to the saddle

Last Answer : (B) Saddle down the hill

The direction of steepest slope on a contour, is (A) Along the contour (B) At an angle of 45° to the contour (C) At right angles to the contour (D) None of these

Description : The direction of steepest slope on a contour, is (A) Along the contour (B) At an angle of 45° to the contour (C) At right angles to the contour (D) None of these

Last Answer : (C) At right angles to the contour

Planimeter is used for measuring (A) Volume (B) Area (C) Contour gradient (D) Slope angle

Description : Planimeter is used for measuring (A) Volume (B) Area (C) Contour gradient (D) Slope angle

Last Answer : (B) Area

A series of closely spaced contour lines represents a (A) Steep slope (B) Gentle slope (C) Uniform slope (D) Plane surface

Description : A series of closely spaced contour lines represents a (A) Steep slope (B) Gentle slope (C) Uniform slope (D) Plane surface

Last Answer : (A) Steep slope

Select the incorrect statement (A) The loss of pre-stress is more in pre-tensioning system than in post-tensioning system. (B) Pre-tensioning system has greater certainty about its durability. (C) For heavy loads and large spans in buildings or bridges, post-tensioning system is cheaper than pre-tensioning system (D) None of the above

Description : Select the incorrect statement (A) The loss of pre-stress is more in pre-tensioning system than in post-tensioning system. (B) Pre-tensioning system has greater certainty about its durability. (C ... or bridges, post-tensioning system is cheaper than pre-tensioning system (D) None of the above

Last Answer : Answer: Option D

While preparing Cash Flow Statement, non-cash items and non-operating items are not required to be adjusted under________ A. Indirect method B. Direct method C. Both a and b D. None of the above

Description : While preparing Cash Flow Statement, non-cash items and non-operating items are not required to be adjusted under________ A. Indirect method B. Direct method C. Both a and b D. None of the above

Last Answer : B. Direct method

What factors might influence a cartographers choice of contour interval?

Description : What factors might influence a cartographers choice of contour interval?

Last Answer : Feel Free to Answer

What would a disadvantage of using a smaller contour interval?

Description : What would a disadvantage of using a smaller contour interval?

Last Answer : What is the answer ?

Define 1) Contour 2) Contour Interval

Description : Define 1) Contour 2) Contour Interval

Last Answer : Contour :- It is an imaginary line on the ground joining points of equal elevation or RLs.  Contour Interval :- The vertical distance between any two consecutive contours is known as a contour interval

Differentiate between contour interval and horizontal equivalent.

Description : Differentiate between contour interval and horizontal equivalent.

Last Answer : Contour Interval - The vertical distance between two successive contours or contour lines, is known as Contour Interval. Horizontal Equivalent - The horizontal distance between two successive contours or contour lines, is known as Horizontal Equivalent.

The best method of interpolation of contours, is by (A) Estimation (B) Graphical means (C) Computation (D) All of these

Description : The best method of interpolation of contours, is by (A) Estimation (B) Graphical means (C) Computation (D) All of these

Last Answer : (C) Computation

In the speed of rotation of earth decreases, the weight of the body will a.Decrease b.Remain unaltered c.Depends on speed ratio d.Cannot be ascertained on the basis the information given e.Increase

Description : In the speed of rotation of earth decreases, the weight of the body will a.Decrease b.Remain unaltered c.Depends on speed ratio d.Cannot be ascertained on the basis the information given e.Increase

Last Answer : c. Depends on speed ratio