Select the incorrect statement. (A) In a direct shear box test, the plane of shear failure is predetermined (B) Better control is achieved on the drainage of the soil in a triaxial compression test (C) Stress distribution on the failure plane in the case of triaxial compression test is uniform (D) Unconfined compression test can be carried out on all types of soils

Select the incorrect statement.
(A) In a direct shear box test, the plane of shear failure is predetermined
(B) Better control is achieved on the drainage of the soil in a triaxial compression test
(C) Stress distribution on the failure plane in the case of triaxial compression test is uniform
(D) Unconfined compression test can be carried out on all types of soils
by

1 Answer

Answer :

Answer: Option D
by

Related questions

Pick up the correct statement from the following: (A) An unconfined compression test is a special case of triaxial compression test (B) An unconfined compression test is a special case of direct shear test (C) The confining pressure is maximum during an unconfined compression test (D) The cylindrical specimen of a soil is subjected to major principal stress till it fails due to shearing along the plane of the failure

Description : Pick up the correct statement from the following: (A) An unconfined compression test is a special case of triaxial compression test (B) An unconfined compression test is a special case of direct ... subjected to major principal stress till it fails due to shearing along the plane of the failure

Last Answer : Option A

A triaxial shear test is preferred to direct shear test, because (A) It can be performed under all three drainage conditions with complete control (B) Precise measurement of pore pressure and change in volume during test, is not possible (C) Stress distribution on the failure plane, is non uniform (D) None of these

Description : A triaxial shear test is preferred to direct shear test, because (A) It can be performed under all three drainage conditions with complete control (B) Precise measurement of pore pressure and change in ... possible (C) Stress distribution on the failure plane, is non uniform (D) None of these

Last Answer : Answer: Option A

For shear strength, triaxial shear test is suitable because (A) It can be performed under all three drainage conditions (B) Precise measurement of the pore pressure and volume change during the test is possible (C) Stress distribution on the failure plane, is uniform (D) All the above

Description : For shear strength, triaxial shear test is suitable because (A) It can be performed under all three drainage conditions (B) Precise measurement of the pore pressure and volume change during the test is possible (C) Stress distribution on the failure plane, is uniform (D) All the above

Last Answer : (D) All the above

For testing a saturated clay for shear strength, the test recommended, is (A) Direct shear test (B) Triaxial compression test (C) Unconfined compression test (D) All the above

Description : For testing a saturated clay for shear strength, the test recommended, is (A) Direct shear test (B) Triaxial compression test (C) Unconfined compression test (D) All the above

Last Answer : Answer: Option C

AA saturated clay is to be tested for shearing strength. Which test should be recommended? a) Direct shear test b) Triaxial shear test c) Vane shear test d) Unconfined compression*

Description : A saturated clay is to be tested for shearing strength. Which test should be recommended? a) Direct shear test b) Triaxial shear test c) Vane shear test d) Unconfined compression*

Last Answer : d) Unconfined compression*

In the triaxial compression test, the application of additional axial stress (i.e. deviator stress) on the soil specimen produces shear stress on (A) Horizontal plane only (B) Vertical plane only (C) Both horizontal and vertical planes (D) All planes except horizontal and vertical planes

Description : In the triaxial compression test, the application of additional axial stress (i.e. deviator stress) on the soil specimen produces shear stress on (A) Horizontal plane only (B) Vertical plane only (C) Both horizontal and vertical planes (D) All planes except horizontal and vertical planes

Last Answer : (D) All planes except horizontal and vertical planes

In a triaxial compression test when drainage is allowed during the first stage (i. e. application of cell pressure) only and not during the second stage (i.e. application of deviator stress at constant cell pressure), the test is known as (A) Consolidated drained test (B) Consolidated undrained test (C) Unconsolidated drained test (D) Unconsolidated undrained test

Description : In a triaxial compression test when drainage is allowed during the first stage (i. e. application of cell pressure) only and not during the second stage (i.e. application of deviator ... test (B) Consolidated undrained test (C) Unconsolidated drained test (D) Unconsolidated undrained test

Last Answer : (B) Consolidated undrained test

The direct shear test suffers from the following disadvantage: (A) Drain condition cannot be controlled (B) Pore water pressure cannot be measured (C) Shear stress on the failure plane is not uniform (D) The area under the shear and vertical loads does not remain constant throughout the test

Description : The direct shear test suffers from the following disadvantage: (A) Drain condition cannot be controlled (B) Pore water pressure cannot be measured (C) Shear stress on the failure plane is not uniform (D) The area under the shear and vertical loads does not remain constant throughout the test

Last Answer : Answer: Option C

For the determination of shear strength parameters, c and , of soil in the laboratory, the test to be conducted will be (a) Triaxial compression test (b) Sieve analysis (c) Compaction test (d) Relative density test

Description : For the determination of shear strength parameters, c and , of soil in the laboratory, the test to be conducted will be (a) Triaxial compression test (b) Sieve analysis (c) Compaction test (d) Relative density test

Last Answer : (a) Triaxial compression test

Select the incorrect statement from the following In eccentrically loaded columns, [ A ] The tensile strength of concrete is ignored [ B ] Design stress – strain curve for steel in compression is the same as in tension [ C ] The strain at different points in the section will be same [ D ] Plane section remain plane even after bending

Description : Select the incorrect statement from the following In eccentrically loaded columns, [ A ] The tensile strength of concrete is ignored [ B ] Design stress - strain curve for steel in compression is the ... different points in the section will be same [ D ] Plane section remain plane even after bending

Last Answer : [ C ] The strain at different points in the section will be same

In a R.C section under flexure, the assumption that “a plane section before bending remains plane after bending” leads to (a) Strain distribution being linear across the depth (b) Stress distribution being linear across the depth (c) Both stress and strain distribution being linear across the depth (d) Shear stress distribution being uniform along the depth

Description : In a R.C section under flexure, the assumption that a plane section before bending remains plane after bending leads to (a) Strain distribution being linear across the depth (b) ... strain distribution being linear across the depth (d) Shear stress distribution being uniform along the depth

Last Answer : (a) Strain distribution being linear across the depth

The coefficients of permeability of soils of an unconfined aquifer and another confined aquifer were determined by pumping water from the wells and observing the effect of water table in two test wells at equal distances was found to be equal. The total height of confined aquifer H is given by (A) H = h2 - h1 (B) H = h1 - h2 (C) H = h2 + h1 (D) ½ (h1 + h2)

Description : The coefficients of permeability of soils of an unconfined aquifer and another confined aquifer were determined by pumping water from the wells and observing the effect of water table in two test wells at equal distances was found to be equal. ... (B) H = h1 - h2 (C) H = h2 + h1 (D) ½ (h1 + h2)

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Failure plane carries maximum shear stress (B) Failure plane does not carry maximum shear stress (C) Failure plane carries shear stress equal to maximum shear stress (D) None of these

Description : Pick up the correct statement from the following: (A) Failure plane carries maximum shear stress (B) Failure plane does not carry maximum shear stress (C) Failure plane carries shear stress equal to maximum shear stress (D) None of these

Last Answer : Option B

Select the incorrect statement. (A) Effective cohesion of a soil can never have a negative value. (B) Effective angle of internal friction for coarse grained soils is rarely below 30°. (C) Effective angle of internal friction for a soil increases as state of compactness increases. (D) Effective angle of internal friction is a complicated function of mineralogy and clay size content.

Description : Select the incorrect statement. (A) Effective cohesion of a soil can never have a negative value. (B) Effective angle of internal friction for coarse grained soils is rarely below 30°. (C ... (D) Effective angle of internal friction is a complicated function of mineralogy and clay size content.

Last Answer : Answer: Option A

Pick up the incorrect definition from the following: (A) Ratio of the compressive strength of unconfined undisturbed soil to that of remoulded soil, is known as the sensitivity of the soil sample (B) The rotation of soil particles into stable state while remoulding, is known as the thiostropy of soil (C) The water content at which a soil flows, is known plastic limit of the soil (D) None of these

Description : Pick up the incorrect definition from the following: (A) Ratio of the compressive strength of unconfined undisturbed soil to that of remoulded soil, is known as the sensitivity of the soil sample (B) The ... content at which a soil flows, is known plastic limit of the soil (D) None of these

Last Answer : Answer: Option D

Unconfined compression test it most suitable for determining the : 1. Sensitivity of clays 2. Settlement of embankments 3. ‘Strength’ of partially saturated clay sample 4. ‘Strength’ of fully saturated clay sample (a) 1, 2, 3 and 4 (b) 2 and 3 only (c) 3 and 4 only (d) 1 and 4 only

Description : Unconfined compression test it most suitable for determining the : 1. Sensitivity of clays 2. Settlement of embankments 3. ‘Strength’ of partially saturated clay sample 4. ‘Strength’ of fully saturated clay sample (a) 1, 2, 3 and 4 (b) 2 and 3 only (c) 3 and 4 only (d) 1 and 4 only

Last Answer : (d) 1 and 4 only

If, instead of single drainage, the number of drainage faces is increased to two in responding soils, the rate of compression will be : (a) 4 times slower (b) 2 times slower (c) 4 times faster (d) 2 times faster

Description : If, instead of single drainage, the number of drainage faces is increased to two in responding soils, the rate of compression will be : (a) 4 times slower (b) 2 times slower (c) 4 times faster (d) 2 times faster

Last Answer : (c) 4 times faster

direct shear test possesses the following disadvantage: (A) A relatively thin thickness of sample permits quick drainage (B) A relatively thin thickness of sample permits quick dissipation of pore pressure developed during the test (C) As the test progresses the area under shear, gradually changes (D) None of these

Description : direct shear test possesses the following disadvantage: (A) A relatively thin thickness of sample permits quick drainage (B) A relatively thin thickness of sample permits quick dissipation of pore pressure ... C) As the test progresses the area under shear, gradually changes (D) None of these

Last Answer : Answer: Option C

The Mohr's straight theory is based on the following fact: (A) Material fails essentially by shear (B) Ultimate strength of the material is determined by the stress in the plane of slip (C) Failure criterion is independent of the intermediate principal stress (D) All the above

Description : The Mohr's straight theory is based on the following fact: (A) Material fails essentially by shear (B) Ultimate strength of the material is determined by the stress in the plane of slip (C) Failure criterion is independent of the intermediate principal stress (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Isotropic consolidation of clay can be obtained in the triaxial apparatus under equal all￾round pressure (B) If the present effective stress is the maximum to which the clay has ever been subjected, it is called normally consolidated clay (C) If the present effective stress in the past was more than present effective stress, it is called over-consolidated clay (D) All the above

Description : Pick up the correct statement from the following: (A) Isotropic consolidation of clay can be obtained in the triaxial apparatus under equal all￾round pressure (B) If the present effective stress is the ... more than present effective stress, it is called over-consolidated clay (D) All the above

Last Answer : Answer: Option D

During consolidation process of clayey soils, indicate the sequence of occurrence of the following events in the order from first to last : 1. Load being taken up by the pore water 2. Load being taken up by the soil grains 3. Drainage of water from the pores of the soil (a) 1, 2 and 3 (b) 2, 3 and 1 (c) 1, 3 and 2 (d) 2, 1 and 3

Description : During consolidation process of clayey soils, indicate the sequence of occurrence of the following events in the order from first to last : 1. Load being taken up by the pore water 2. Load being taken up by the soil grains 3. Drainage of ... 1, 2 and 3 (b) 2, 3 and 1 (c) 1, 3 and 2 (d) 2, 1 and 3

Last Answer : (c) 1, 3 and 2

Pick up the correct statement from the following: (A) In soils, the flow index indicates variation in shear strength with water content (B) Liquid limit minus plastic limit, is known as plasticity index of the soil (C) Plastic limit minus shrinkage limit, is known as shrinkage index of the soil (D) All the above

Description : Pick up the correct statement from the following: (A) In soils, the flow index indicates variation in shear strength with water content (B) Liquid limit minus plastic limit, is known as plasticity ... Plastic limit minus shrinkage limit, is known as shrinkage index of the soil (D) All the above

Last Answer : Answer: Option D

Pick up the incorrect statement from the following: (A) Compaction has no effect on the structure of a soil (B) Permeability decreases with increase in the dry density of a compacted soil (C) A wet side compacted soil is more compressible than a dry side compacted soil (D) Dry side compaction soils swell more when given access to moisture

Description : Pick up the incorrect statement from the following: (A) Compaction has no effect on the structure of a soil (B) Permeability decreases with increase in the dry density of a compacted soil (C) ... a dry side compacted soil (D) Dry side compaction soils swell more when given access to moisture

Last Answer : (A) Compaction has no effect on the structure of a soil

Pick up the incorrect statement from the following. The intensity of horizontal shear stress at the elemental part of a beam section, is directly proportional to (A) Shear force (B) Area of the section (C) Distance of the C.G. of the area from its neutral axis (D) Moment of the beam section about its neutral axis

Description : Pick up the incorrect statement from the following. The intensity of horizontal shear stress at the elemental part of a beam section, is directly proportional to (A) Shear force (B) Area of the section ... . of the area from its neutral axis (D) Moment of the beam section about its neutral axis

Last Answer : Answer: Option D

Pick up the incorrect statement from the following: Tensile reinforcement bars of a rectangular beam (A) Are curtailed if not required to resist the bending moment (B) Are bent up at suitable places to serve as shear reinforcement (C) Are bent down at suitable places to serve as shear reinforcement (D) Are maintained at bottom to provide at least local bond stress

Description : Pick up the incorrect statement from the following: Tensile reinforcement bars of a rectangular beam (A) Are curtailed if not required to resist the bending moment (B) Are bent up at suitable ... to serve as shear reinforcement (D) Are maintained at bottom to provide at least local bond stress

Last Answer : Answer: Option C

A cylindrical specimen of saturated soil failed under an axial vertical stress of 100kN/m² when it was laterally unconfmed. The failure plane was inclined to the horizontal plane at an angle of 45°. The values of cohesion and angle of internal friction for the soil are respectively (A) 0.5 N/mm² and 30° (B) 0.05 N/mm² and 0° (C) 0.2 N/mm² and 0° (D) 0.05 N/mm² and 45°

Description : A cylindrical specimen of saturated soil failed under an axial vertical stress of 100kN/m² when it was laterally unconfmed. The failure plane was inclined to the horizontal plane at an angle of 45°. The values of cohesion and angle of ... N/mm² and 0° (C) 0.2 N/mm² and 0° (D) 0.05 N/mm² and 45°

Last Answer : Answer: Option B

While designing screw threads, adequate length of engaged threads between the screw and nut is provided so as to prevent failure of threads due to (A) Direct shear stress (B) Torsional shear stress (C) Tensile stress (D) Compressive stress

Description : While designing screw threads, adequate length of engaged threads between the screw and nut is provided so as to prevent failure of threads due to (A) Direct shear stress (B) Torsional shear stress (C) Tensile stress (D) Compressive stress

Last Answer : (A) Direct shear stress

The ultimate failure is assumed to be reached when the section reaches a uniform compression strain of [ A ] 0.002 [ B ] 0.0035 [ C ] 0.0045 [ D ] 0.005

Description : The ultimate failure is assumed to be reached when the section reaches a uniform compression strain of [ A ] 0.002 [ B ] 0.0035 [ C ] 0.0045 [ D ] 0.005

Last Answer : [ A ] 0.002

A concrete block subjected to shear stresses, then the failure may result by [ A ] Diagonal tension [ B ] Longitudinal tension [ C ] Diagonal compression [ D ] None of the above

Description : A concrete block subjected to shear stresses, then the failure may result by [ A ] Diagonal tension [ B ] Longitudinal tension [ C ] Diagonal compression [ D ] None of the above

Last Answer : [ A ] Diagonal tension

Minor principal stress has minimum ________ a. value of shear stress acting on the plane b. intensity of direct stress c. both a. and b. d. none of the above

Description : Minor principal stress has minimum ________ a. value of shear stress acting on the plane b. intensity of direct stress c. both a. and b. d. none of the above

Last Answer : b. intensity of direct stress

If drainage is permitted throughout the test, during the application of both normal, and shear stresses so that full consolidation occurs and no excess pore pressure is set up at any stage of the test, is known as (A) Quick test (B) Drained test (C) Consolidated undrained test (D) None of these

Description : If drainage is permitted throughout the test, during the application of both normal, and shear stresses so that full consolidation occurs and no excess pore pressure is set up at any stage of the test, is ... (A) Quick test (B) Drained test (C) Consolidated undrained test (D) None of these

Last Answer : Answer: Option B

Select the correct statement. (A) Unit weight of dry soil is greater than unit weight of wet soil (B) For dry soils, dry unit weight is less than total unit weight (C) Unit weight of soil increases due to submergence in water (D) Unit weight of soil decreases due to submergence in water

Description : Select the correct statement. (A) Unit weight of dry soil is greater than unit weight of wet soil (B) For dry soils, dry unit weight is less than total unit weight (C) Unit weight of soil increases due to submergence in water (D) Unit weight of soil decreases due to submergence in water

Last Answer : Answer: Option D

Which one of the following statements is incorrect ? (A) Pareto analysis is a statistical method used for analyzing causes, and is one of the primary tools for quality management. (B) Reliability of a software specifies the probability of failure-free operation of that software for a given time duration. (C) The reliability of a system can also be specified as the Mean Time To Failure (MTTF). (D) In white-box testing, the test cases are decided from the specifications or the requirements.

Description : Which one of the following statements is incorrect ? (A) Pareto analysis is a statistical method used for analyzing causes, and is one of the primary tools for quality management. (B) Reliability of ... (D) In white-box testing, the test cases are decided from the specifications or the requirements.

Last Answer : (D) In white-box testing, the test cases are decided from the specifications or the requirements.

Coefficient of compressibility is (A) Constant for any type of soil (B) Different for different types of soils and also different for a soil under different states of consolidation (C) Different for different types of soils but same for a soil under different states of consolidation (D) Independent of type of soil but depends on the stress history of soil

Description : Coefficient of compressibility is (A) Constant for any type of soil (B) Different for different types of soils and also different for a soil under different states of consolidation (C) Different for ... of consolidation (D) Independent of type of soil but depends on the stress history of soil

Last Answer : Answer: Option B

Sensitivity of a soil can be defined as (A) Percentage of volume change of soil under saturated condition (B) Ratio of compressive strength of unconfined undisturbed soil to that of soil in a remoulded state (C) Ratio of volume of voids to volume of solids (D) None of the above

Description : Sensitivity of a soil can be defined as (A) Percentage of volume change of soil under saturated condition (B) Ratio of compressive strength of unconfined undisturbed soil to that of soil in a remoulded state (C) Ratio of volume of voids to volume of solids (D) None of the above

Last Answer : Answer: Option B

Select the incorrect statement (A) The loss of pre-stress is more in pre-tensioning system than in post-tensioning system. (B) Pre-tensioning system has greater certainty about its durability. (C) For heavy loads and large spans in buildings or bridges, post-tensioning system is cheaper than pre-tensioning system (D) None of the above

Description : Select the incorrect statement (A) The loss of pre-stress is more in pre-tensioning system than in post-tensioning system. (B) Pre-tensioning system has greater certainty about its durability. (C ... or bridges, post-tensioning system is cheaper than pre-tensioning system (D) None of the above

Last Answer : Answer: Option D

Pick up the incorrect statement from the following: (A) The net amount of water which joins the surface streams in a catchment, is known as surface run-off (B) The amount of water which joins the stream from the underground water, is called base flow (C) The yearly run off in cm depth over the catchment, is termed as the yield of the drainage basin(D) None of these

Description : Pick up the incorrect statement from the following:  (A) The net amount of water which joins the surface streams in a catchment, is known as  surface run-off  (B) The amount of water which ... over the catchment, is termed as the yield of the drainage  basin  (D) None of these

Last Answer : (D) None of these

Pick up the incorrect statement from the following: (A) Tresguet did not provide the top camber for the drainage of surface water (B) Tresguet provided the top camber for the drainage of surface water (C) Telford provided two layers of stones in the central 5.4 m width and one layer was provided on the sides (D) Macadam provided a camber to the formation at the dug-up state, to drain percolated water

Description : Pick up the incorrect statement from the following: (A) Tresguet did not provide the top camber for the drainage of surface water (B) Tresguet provided the top camber for the drainage of surface ... (D) Macadam provided a camber to the formation at the dug-up state, to drain percolated water

Last Answer : Answer: Option A

The base of a column is subjected to moment. If the intensity of bearing pressure due to axial load is equal to stress due to moment, then the bearing pressure between the base and the concrete is (a) Uniform compression throughout (b) Zero at one end and compression at the other end (c) Tension at one end and compression at the other end (d) Compression, verying as a parabolic profile

Description : The base of a column is subjected to moment. If the intensity of bearing pressure due to axial load is equal to stress due to moment, then the bearing pressure between the base and the concrete ... Tension at one end and compression at the other end (d) Compression, verying as a parabolic profile

Last Answer : (b) Zero at one end and compression at the other end

If S is the potential infiltration, P is rainfall in cm in a drainage of a soil with fair pasture cover, the direct run off Q in cm is given by (A) Q = (P - 0.1 S)²/(P + 0.4 S) (B) Q = (P - 0.2 S)²/(P + 0.6 S) (C) Q = (P - 0.2 S)²/(P + 0.8 S) (D) Q = (P - 0.2 S)²/(P + 0.2 S)

Description : If S is the potential infiltration, P is rainfall in cm in a drainage of a soil with fair pasture cover, the direct run off Q in cm is given by (A) Q = (P - 0.1 S)²/(P + 0.4 S) (B) Q = (P - 0.2 S)²/(P + 0.6 S) (C) Q = (P - 0.2 S)²/(P + 0.8 S) (D) Q = (P - 0.2 S)²/(P + 0.2 S)

Last Answer : Answer: Option C

In case of laminar flow of fluid through a circular pipe, the (A) Shear stress over the cross-section is proportional to the distance from the surface of the pipe (B) Surface of velocity distribution is a paraboloid of revolution, whose volume equals half the volume of circumscribing cylinder (C) Velocity profile varies hyperbolically and the shear stress remains constant over the cross-section (D) Average flow occurs at a radial distance of 0.5 r from the centre of the pipe (r = pipe radius)

Description : In case of laminar flow of fluid through a circular pipe, the (A) Shear stress over the cross-section is proportional to the distance from the surface of the pipe (B) Surface of velocity distribution is a ... occurs at a radial distance of 0.5 r from the centre of the pipe (r = pipe radius)

Last Answer : (B) Surface of velocity distribution is a paraboloid of revolution, whose volume equals half the volume of circumscribing cylinder

A beam is said to be of uniform strength, if (A) B.M. is same throughout the beam (B) Shear stress is same throughout the beam (C) Deflection is same throughout the beam (D) Bending stress is same at every section along its longitudinal axis

Description : A beam is said to be of uniform strength, if (A) B.M. is same throughout the beam (B) Shear stress is same throughout the beam (C) Deflection is same throughout the beam (D) Bending stress is same at every section along its longitudinal axis

Last Answer : (D) Bending stress is same at every section along its longitudinal axis

A beam is said to be of uniform strength, if (A) B.M. is same throughout the beam (B) Deflection is same throughout the beam (C) Bending stress is same throughout the beam (D) Shear stress is same throughout the beam

Description : A beam is said to be of uniform strength, if (A) B.M. is same throughout the beam (B) Deflection is same throughout the beam (C) Bending stress is same throughout the beam (D) Shear stress is same throughout the beam

Last Answer : (C) Bending stress is same throughout the beam

16. The shear stress-strain graph for a Non-Newtonian fluid is a curve. A) Correct B) Incorrect

Description : 16. The shear stress-strain graph for a Non-Newtonian fluid is a curve. A) Correct B) Incorrect

Last Answer : A

The compression in steel (fS) at failure for Fe - 415 grade steel using stress-strain curve shall be [ A ] 0.87 fy [ B ] 0.75 fy [ C ] 0.45 fy [ D ] 0.55 fy

Description : The compression in steel (fS) at failure for Fe - 415 grade steel using stress-strain curve shall be [ A ] 0.87 fy [ B ] 0.75 fy [ C ] 0.45 fy [ D ] 0.55 fy

Last Answer : [ B ] 0.75 fy

During the first stage of triaxial test when the cell pressure is increased from 0.10 N/mm² to 0.26 N/mm², the pore water pressure increases from 0.07 N/mm² to 0.15 N/mm². Skempton's pore B (A) 0.5 (B) -0.5 (C) 2.0 (D) -2.0

Description : During the first stage of triaxial test when the cell pressure is increased from 0.10 N/mm² to 0.26 N/mm², the pore water pressure increases from 0.07 N/mm² to 0.15 N/mm². Skempton's pore B (A) 0.5 (B) -0.5 (C) 2.0 (D) -2.0

Last Answer : (A) 0.5

The length/diameter ratio of cylindrical specimens used in triaxial test, is generally (A) 1 (B) 1.5 (C) 2 (D) 2.5

Description : The length/diameter ratio of cylindrical specimens used in triaxial test, is generally (A) 1 (B) 1.5 (C) 2 (D) 2.5

Last Answer : Answer: Option C

The triaxial apparatus is usually used for (A) Unconsolidated-undrained test (B) Consolidated-undrained test (C) Drained test (D) All the above tests

Description : The triaxial apparatus is usually used for (A) Unconsolidated-undrained test (B) Consolidated-undrained test (C) Drained test (D) All the above tests

Last Answer : Answer: Option D

The vane shear test is used for the in-situ determination of the undrained strength of the intact fully saturated (A) Sands (B) Clays (C) Gravels (D) Highly organic soils

Description : The vane shear test is used for the in-situ determination of the undrained strength of the intact fully saturated (A) Sands (B) Clays (C) Gravels (D) Highly organic soils

Last Answer : (B) Clays

Maximum shear stress theory for the failure of a material at the elastic limit, is known (A) Guest's or Trecas' theory (B) St. Venant's theory (C) Rankine's theory (D) Haig's theory

Description : Maximum shear stress theory for the failure of a material at the elastic limit, is known  (A) Guest's or Trecas' theory  (B) St. Venant's theory  (C) Rankine's theory  (D) Haig's theory

Last Answer : (A) Guest's or Trecas' theory