If the foundations of all the columns of a structure are designed on the total live and dead load basis, then (A) There will be no settlement of columns (B) There will be no differential settlement (C) The settlement of exterior columns will be more than interior columns (D) The settlement of interior columns will be more than exterior columns

If the foundations of all the columns of a structure are designed on the total live and dead load
basis, then
(A) There will be no settlement of columns
(B) There will be no differential settlement
(C) The settlement of exterior columns will be more than interior columns
(D) The settlement of interior columns will be more than exterior columns
by

1 Answer

Answer :

Answer: Option C
by

Related questions

To minimise the effect of differential settlement, the area of a footing should be designed for (A) Dead load only (B) Dead load + live load (C) Dead load + fraction of live load (D) Live load + fraction of dead load

Description : To minimise the effect of differential settlement, the area of a footing should be designed for (A) Dead load only (B) Dead load + live load (C) Dead load + fraction of live load (D) Live load + fraction of dead load

Last Answer : Answer: Option C

The maximum permissible differential settlement, in case of foundations in clayey soil, is usually limited to (A) 10 mm (B) 20 mm (C) 30 mm (D) 40 mm

Description : The maximum permissible differential settlement, in case of foundations in clayey soil, is usually limited to (A) 10 mm (B) 20 mm (C) 30 mm (D) 40 mm

Last Answer : Answer: Option D

The differential settlement in case of foundations on sandy soils should not exceed (A) 25 mm (B) 40 mm (C) 65 mm (D) 100 m

Description : The differential settlement in case of foundations on sandy soils should not exceed (A) 25 mm (B) 40 mm (C) 65 mm (D) 100 mm

Last Answer : Answer: Option A

In case of foundations on sandy soil, maximum permissible differential settlement, is usually limited to (A) 15 mm (B) 25 mm (C) 35 mm (D) 45 m

Description : In case of foundations on sandy soil, maximum permissible differential settlement, is usually limited to (A) 15 mm (B) 25 mm (C) 35 mm (D) 45 mm

Last Answer : Answer: Option B

If the length of a combined footing for two columns l metres apart is L and the projection on the left side of the exterior column is x, then the projection y on the right side of the exterior column, in order to have a uniformly distributed load, is (where is the distance of centre of gravity of column loads). (A) y = L - (l - ) (B) y = L/2 + (l - ) (C) y = L/2 - (l + ) (D) y = L/2 - (l - )

Description : If the length of a combined footing for two columns l metres apart is L and the projection on the left side of the exterior column is x, then the projection y on the right side of the exterior column, in order to have a uniformly distributed ... l - ) (C) y = L/2 - (l + ) (D) y = L/2 - (l - )

Last Answer : Answer: Option D

The maximum total settlement for isolated foundations on clayey soils should be limited to (A) 25 mm (B) 40 mm (C) 65 mm (D) 100 mm

Description : The maximum total settlement for isolated foundations on clayey soils should be limited to (A) 25 mm (B) 40 mm (C) 65 mm (D) 100 mm

Last Answer : Option C

The columns of multi-storeyed buildings are designed to withstand the forces due to (A) Dead loads (B) Live loads (C) Wind loads (D) All of these

Description : The columns of multi-storeyed buildings are designed to withstand the forces due to (A) Dead loads (B) Live loads (C) Wind loads (D) All of these

Last Answer : Option D

Pick up the incorrect statement from the following: (A) The function of foundation is to distribute the load of super structure over a large bearing area (B) No timbering is required for shallow trenches (C) Shallow foundations can be constructed on made-up soil (D) Black cotton soil is very good for foundation bed

Description : Pick up the incorrect statement from the following: (A) The function of foundation is to distribute the load of super structure over a large bearing area (B) No timbering is required for shallow ... can be constructed on made-up soil (D) Black cotton soil is very good for foundation bed

Last Answer : Answer: Option D

Settlement of foundations or Tilted piers and abutments will be considered as distressed bridge as a) Group I* b) Group II c) Both of the above d) None of the above

Description : Settlement of foundations or Tilted piers and abutments will be considered as distressed bridge as a) Group I* b) Group II c) Both of the above d) None of the above

Last Answer : a) Group I*

In clay soil (A) Swelling and shrinkage characteristics prevail (B) Consolidation continues even after several years of construction (C) Differential settlement is generally prevalent (D) All the above

Description : In clay soil (A) Swelling and shrinkage characteristics prevail (B) Consolidation continues even after several years of construction (C) Differential settlement is generally prevalent (D) All the above

Last Answer : Answer: Option D

Bottom bars under the columns are extended into the interior of the footing slab to a distance greater than (A) 42 diameters from the centre of the column (B) 42 diameters from the inner edge of the column (C) 42 diameters from the outer edge of the column (D) 24 diameters from the centre of the column

Description : Bottom bars under the columns are extended into the interior of the footing slab to a distance greater than (A) 42 diameters from the centre of the column (B) 42 diameters from the inner edge of ... ) 42 diameters from the outer edge of the column (D) 24 diameters from the centre of the column

Last Answer : Answer: Option C

The foundations are placed below ground level, to increase (A) Strength (B) Workability (C) Stability of structure (D) All the above

Description : The foundations are placed below ground level, to increase (A) Strength (B) Workability (C) Stability of structure (D) All the above

Last Answer : Answer: Option C

In testing a pile by load test, pile platform is loaded with one and half times the design load and a maximum settlement is noted. The load is gradually removed and the consequent rebound is measured. For a safe pile, the net settlement (i.e. total settlement minus rebound) per tonne of test load should not exceed (A) 10 mm (B) 15 mm (C) 20 mm (D) 25 mm

Description : In testing a pile by load test, pile platform is loaded with one and half times the design load and a maximum settlement is noted. The load is gradually removed and the consequent rebound is measured. For a safe pile, the net ... load should not exceed (A) 10 mm (B) 15 mm (C) 20 mm (D) 25 mm

Last Answer : Answer: Option D

How thick do you make the exterior and interior walls of a residence if you are using Post and Beam construction instead of standard Timber Frame?

Description : How thick do you make the exterior and interior walls of a residence if you are using Post and Beam construction instead of standard Timber Frame?

Last Answer : Post and Beam is historically 10 to 12 inches by the same. . . so wall thickness of up to 12 inches. I owned a 1720’s center chimney with post and beam.

Taking into consideration everything from interior to exterior, location, etc., what do you like and what do you not like about your present home?

Description : Taking into consideration everything from interior to exterior, location, etc., what do you like and what do you not like about your present home?

Last Answer : answer:This home is new to me and we have only lived in it for six months. My wife and I spent a lot of time deciding the type of house, location etc and both converged on a specific area in ... the sub-floor squeaks that I could not remedy and just needs to be replaced. Would not change much else.

Any takers on what I should do with exterior mods for my car. And some interior mods?

Description : Any takers on what I should do with exterior mods for my car. And some interior mods?

Last Answer : Your links aren’t working, but have you looked at Golf mod sites? There are sites for practically every model of car, I think, and they seem to have good ideas. Usually, the participants are total fanboys and will go into excruciating detail about what they did and how they did it.

An exterior angle of a triangle is 110° and the two interior opposite angles are equal find the interior opposite angels -Maths 9th

Description : An exterior angle of a triangle is 110° and the two interior opposite angles are equal find the interior opposite angels -Maths 9th

Last Answer : each interior opposite angles are 55

An exterior angle of a triangle is 110° and the two interior opposite angles are equal find the interior opposite angels -Maths 9th

Description : An exterior angle of a triangle is 110° and the two interior opposite angles are equal find the interior opposite angels -Maths 9th

Last Answer : each interior opposite angles are 55

An exterior angle of a triangle is 110° and its two interior opposite angles are equal. Find each of these equal angles. -Maths 9th

Description : An exterior angle of a triangle is 110° and its two interior opposite angles are equal. Find each of these equal angles. -Maths 9th

Last Answer : 2x=110 X=55 x+x+y=180 110+y=180 Y=70

What polygon does the sum of the measures of interior angles equal the sum of the measures of the exterior angles?

Description : What polygon does the sum of the measures of interior angles equal the sum of the measures of the exterior angles?

Last Answer : A 4 sided quadrilateral has interior angles that add up to 360degrees and its exterior angles add up to 360 degrees

How do you work out the exterior and interior angles of a regular polygon with W sides?

Description : How do you work out the exterior and interior angles of a regular polygon with W sides?

Last Answer : Exterior angle regular polygon = 360° ÷ number of sides = 360° ÷WInterior angle regular polygon = 180° - exterior angle regularpolygon= 180° - (360° ÷ number of sides )= 180° - (360° ÷ W)

How do you work out the exterior and interior angles of a regular polygon with W sides?

Description : How do you work out the exterior and interior angles of a regular polygon with W sides?

Last Answer : Exterior angle regular polygon = 360° ÷ number of sides = 360° ÷WInterior angle regular polygon = 180° - exterior angle regularpolygon= 180° - (360° ÷ number of sides )= 180° - (360° ÷ W)

What is the difference between interior and exterior house paint?

Description : What is the difference between interior and exterior house paint?

Last Answer : Interior house paint is to be used on your inner walls like in your kitchen, bedrooms, bathrooms, and living rooms. Exterior paint is used for the outside of your house and most of the time it is more weather resistant. Hope it helps.

Exterior and interior characteristics such as layout, displays, colour, and lighting are elements of which one of the following issues that affect retailing objectives? A)Services B)Atmospherics C)Location D)Environment E)Store image

Description : Exterior and interior characteristics such as layout, displays, colour, and lighting are elements of which one of the following issues that affect retailing objectives? A)Services B)Atmospherics C)Location D)Environment E)Store image

Last Answer : B)Atmospherics

In the grading process, eggs are examined for both interior and exterior quality and are sorted according to ____. a. color c. weight b. shape d. breed

Description : In the grading process, eggs are examined for both interior and exterior quality and are sorted according to ____. a. color c. weight b. shape d. breed

Last Answer : c. weight

If d is the economic designed depth of a slab, the thickness of the cement concrete pavement slab at interior, is kept (A) 1.275 d (B) 1.125 d (C) 0.85 d (D) 0.75 d

Description : If d is the economic designed depth of a slab, the thickness of the cement concrete pavement slab at interior, is kept (A) 1.275 d (B) 1.125 d (C) 0.85 d (D) 0.75 d

Last Answer : Answer: Option C

A fixed beam with central point load undergoes a slight settlement at one end. Select suitable answer from the following: (a) Moment induced at both ends will be same (b) Moment induced at the end that has undergone settlement will be maximum (c) Moment induced will be maximum at the end having no settlement (d) Zero moment at the end that has settled.

Description : A fixed beam with central point load undergoes a slight settlement at one end. Select suitable answer from the following: (a) Moment induced at both ends will be same (b) Moment induced at the end that ... will be maximum at the end having no settlement (d) Zero moment at the end that has settled.

Last Answer : (c) Moment induced will be maximum at the end having no settlement

If a rectangular pre-stressed beam of an effective span of 5 meters and carrying a total load 3840 kg/m, is designed by the load balancing method, the central dip of the parabolic tendon should be (A) 5 cm (B) 10 cm (C) 15 cm (D) 20 cm

Description : If a rectangular pre-stressed beam of an effective span of 5 meters and carrying a total load 3840 kg/m, is designed by the load balancing method, the central dip of the parabolic tendon should be (A) 5 cm (B) 10 cm (C) 15 cm (D) 20 cm

Last Answer : Answer: Option B

Consider the following statements relating to foundations on expansive soils: 1. Strength should be improved and compressibility should be reduced. 2. Compressibility should be increased. 3. No stabilization should be done. Which of these statements is/are correct? (a) 1, 2 & 3 (b) 2 only (c) 1 only (d) 3 only

Description : Consider the following statements relating to foundations on expansive soils: 1. Strength should be improved and compressibility should be reduced. 2. Compressibility should be increased. 3. No stabilization should be done. Which of these ... ? (a) 1, 2 & 3 (b) 2 only (c) 1 only (d) 3 only

Last Answer : (c) 1 only

A 600 mm square bearing plate settles by 15 mm in plate load test on a cohesion-less soil under an intensity of loading of 0.2 N/ram². The settlement of a prototype shallow footing 1 m square under the same intensity of loading is (A) 15 mm (B) Between 15 mm and 25 mm (C) 25 mm (D) Greater than 25 mm

Description : A 600 mm square bearing plate settles by 15 mm in plate load test on a cohesion-less soil under an intensity of loading of 0.2 N/ram². The settlement of a prototype shallow footing 1 m square under the same intensity of ... (A) 15 mm (B) Between 15 mm and 25 mm (C) 25 mm (D) Greater than 25 mm

Last Answer : Answer: Option B

Assertion A : The load factor for live load is greater than that for dead load. Reason R : The live loads are more uncertain than dead loads. Select your answer based on the coding system given below: (A) Both A and R is true and R is the correct explanation of A (B) Both A and R is true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true

Description : Assertion A : The load factor for live load is greater than that for dead load. Reason R : The live loads are more uncertain than dead loads. Select your answer based on the coding system given below: (A) Both A ... explanation of A (C) A is true but R is false (D) A is false but R is true

Last Answer : Answer: Option A

A closed helical spring under axial load is designed on the basis of (a) Shear (b) Compression (c) Bending (d) None

Description : A closed helical spring under axial load is designed on the basis of (a) Shear (b) Compression (c) Bending (d) None

Last Answer : (a) Shear

Which one of the following statements is true? (A) Clays are more porous than sands (B) Pressure of organic matter in a soil decreases the bearing capacity of the soil (C) Aluminous cement is used for foundations in soils with chemical deposits (D) All the above

Description : Which one of the following statements is true? (A) Clays are more porous than sands (B) Pressure of organic matter in a soil decreases the bearing capacity of the soil (C) Aluminous cement is used for foundations in soils with chemical deposits (D) All the above

Last Answer : (D) All the above

The ultimate consolidation settlement of a structure resting on a soil (A) Decreases with the increase in the initial voids ratio (B) Decreases with the decrease in the plastic limit (C) Increases with the increase in the initial voids ratio (D) Increases with the decrease in the porosity of the soil

Description : The ultimate consolidation settlement of a structure resting on a soil (A) Decreases with the increase in the initial voids ratio (B) Decreases with the decrease in the plastic limit (C) Increases ... increase in the initial voids ratio (D) Increases with the decrease in the porosity of the soil

Last Answer : Answer: Option A

Okay, so I just went out to work on the exterior of my parent's home and found a dead cat, what should I do?

Description : Okay, so I just went out to work on the exterior of my parent's home and found a dead cat, what should I do?

Last Answer : D:

A 300 mm square bearing plate settles by 15 mm in a plate load test on a cohesive soil when the intensity of loading is 0.2 N/mm². The settlement of a prototype shallow footing 1 m square under the same intensity of loading is (A) 15 mm (B) 30 mm (C) 50 mm (D) 167 mm

Description : A 300 mm square bearing plate settles by 15 mm in a plate load test on a cohesive soil when the intensity of loading is 0.2 N/mm². The settlement of a prototype shallow footing 1 m square under the same intensity of loading is (A) 15 mm (B) 30 mm (C) 50 mm (D) 167 mm

Last Answer : (C) 50 mm

Pick up the correct statement from the following: (A) The bearing capacity of a pile is defined as the load which can be sustained by the pile without producing excessive settlement (B) The safe bearing capacity of a pile is obtained by dividing the ultimate bearing capacity with a suitable factor of safety (C) The factor of safety for piles is taken as 6 (D) All the above

Description : Pick up the correct statement from the following: (A) The bearing capacity of a pile is defined as the load which can be sustained by the pile without producing excessive settlement (B) The safe bearing capacity ... of safety (C) The factor of safety for piles is taken as 6 (D) All the above

Last Answer : Answer: Option D

The region of the cross-section of a column in which compressive load may be applied without producing any tensile stress, is known as the core of the cross-section. In circular columns the radius of the core, is (A) One-half of the radius (B) One-third of the radius (C) One-quarter of the radius (D) One-fifth of the radius

Description : The region of the cross-section of a column in which compressive load may be applied without producing any tensile stress, is known as the core of the cross-section. In circular columns the radius of the core, ... One-third of the radius (C) One-quarter of the radius (D) One-fifth of the radius

Last Answer : (C) One-quarter of the radius

Pick up the correct statement from the following: (A) The roof slabs of multi-storeyed buildings are constructed monolithically to carry the various floor loads (B) The beams of multi-storeyed buildings rest on girders and are the main load transferring members to the columns (C) The slab is spanned across the secondary beams provided between the main beams (D) All of these

Description : Pick up the correct statement from the following: (A) The roof slabs of multi-storeyed buildings are constructed monolithically to carry the various floor loads (B) The beams of multi-storeyed ... slab is spanned across the secondary beams provided between the main beams (D) All of these

Last Answer : Answer: Option D

The purpose of lateral ties in short R.C. columns is to (a) Increase the load carrying capacity of column (b) Facilitate compaction of concrete (c) Facilitate construction (d) Avoid buckling of longitudinal bars

Description : The purpose of lateral ties in short R.C. columns is to (a) Increase the load carrying capacity of column (b) Facilitate compaction of concrete (c) Facilitate construction (d) Avoid buckling of longitudinal bars

Last Answer : (d) Avoid buckling of longitudinal bars

The purpose of lateral ties in short reinforced concrete columns is to [ A ] Facilitate construction [ B ] Facilitate compaction of concrete [ C ] Increase the load carrying capacity of the columns [ D ] Avoid buckling of longitudinal bars

Description : The purpose of lateral ties in short reinforced concrete columns is to [ A ] Facilitate construction [ B ] Facilitate compaction of concrete [ C ] Increase the load carrying capacity of the columns [ D ] Avoid buckling of longitudinal bars

Last Answer : [ D ] Avoid buckling of longitudinal bars

Interior thickness of concrete road slab for design wheel load 6300 kg and permissible flexural stress 21 kg/cm2 , is (A) 17.0 cm (B) 25.5 cm (C) 34.0 cm (D) 42.5 cm

Description : Interior thickness of concrete road slab for design wheel load 6300 kg and permissible flexural stress 21 kg/cm2 , is (A) 17.0 cm (B) 25.5 cm (C) 34.0 cm (D) 42.5 cm

Last Answer : Answer: Option B

In a concrete pavement, during summer, at and soon after mid-day, the combined stress at the interior of the slab is equal to : (a) Wheel load stress + Temperature warping stress + Sub grade resistance stress (b) Wheel load stress + Temperature warping stress – Sub grade resistant stress (c) Wheel load stress – Temperature warping stress + Sub grade resistant stress (d) Wheel load stress – Temperature warping stress − Sub grade resistant stress

Description : In a concrete pavement, during summer, at and soon after mid-day, the combined stress at the interior of the slab is equal to : (a) Wheel load stress + Temperature warping stress + Sub ... + Sub grade resistant stress (d) Wheel load stress - Temperature warping stress − Sub grade resistant stress

Last Answer : (b) Wheel load stress + Temperature warping stress – Sub grade resistant stress

The load factors for live load and dead load are taken respectively as (A) 1.5 and 2.2 (B) 2.2 and 1.5 (C) 1.5 and 1.5 (D) 2.2 and 2.2

Description : The load factors for live load and dead load are taken respectively as (A) 1.5 and 2.2 (B) 2.2 and 1.5 (C) 1.5 and 1.5 (D) 2.2 and 2.2

Last Answer : (B) 2.2 and 1.5

The minimum depth of building foundations on (A) Sandy soils is 80 cm to 100 cm (B) Clay soils is 90 cm to 160 cm (C) Rocky soils is 5 cm to 50 cm (D) All the above

Description : The minimum depth of building foundations on (A) Sandy soils is 80 cm to 100 cm (B) Clay soils is 90 cm to 160 cm (C) Rocky soils is 5 cm to 50 cm (D) All the above

Last Answer : Answer: Option D

Pile foundations are generally preferred to for (A) Bridge foundations (B) Sky scrapper buildings (C) Residential buildings (D) Runways

Description : Pile foundations are generally preferred to for (A) Bridge foundations (B) Sky scrapper buildings (C) Residential buildings (D) Runways

Last Answer : Answer: Option B

As compared to gravity dams, earthen dams (A) Are costlier (B) Are less susceptible to failure (C) Require sound rock foundations (D) Require less skilled labour

Description : As compared to gravity dams, earthen dams (A) Are costlier (B) Are less susceptible to failure (C) Require sound rock foundations (D) Require less skilled labour

Last Answer : Answer: Option D

Pozzolana cement is used with confidence for construction of (A) Dams (B) Massive foundations (C) R.C.C. structures (D) All the above

Description : Pozzolana cement is used with confidence for construction of (A) Dams (B) Massive foundations (C) R.C.C. structures (D) All the above

Last Answer : (D) All the above

Lime concrete is generally used for (A) Wall foundations (B) Flooring at ground level (C) Both (A) and (B) (D) Neither (A) nor (b)

Description : Lime concrete is generally used for (A) Wall foundations (B) Flooring at ground level (C) Both (A) and (B) (D) Neither (A) nor (b)

Last Answer : Answer: Option B