As per Berlin's formula, the length of wave in metres is given by (Where nds for two successive waves to pass the same section.) (A) 1.3412 (B) 1.5612 (C) 1.7412 (D) 1.9412

As per Berlin's formula, the length of wave in metres is given by
(Where nds for two successive waves to pass the same section.)
(A) 1.3412
(B) 1.5612
(C) 1.7412
(D) 1.9412
by

1 Answer

Answer :

(B) 1.5612
by

Related questions

As per Stevenson's empirical formula, the approximate value of the height of the wave in metres is given by (A) 0.34 VF (B) 0.5 VF (C) 1.5 VF (D) 3.4 VF

Description : As per Stevenson's empirical formula, the approximate value of the height of the wave in metres is given by (A) 0.34 VF (B) 0.5 VF (C) 1.5 VF (D) 3.4 VF

Last Answer : (A) 0.34 VF

If C is basic capacity per lane, V is velocity in km/hour, S is stopping distance plus length of the vehicles in metres, the formula C = 1000V/S is applicable to (A) District roads (B) Two lane roads (C) Two lane roads in one direction (D) None of these

Description : If C is basic capacity per lane, V is velocity in km/hour, S is stopping distance plus length of the vehicles in metres, the formula C = 1000V/S is applicable to (A) District roads (B) Two lane roads (C) Two lane roads in one direction (D) None of these

Last Answer : Answer: Option C

The cost of the earthwork in excavation for the surface drain of cross-section shown in the given figure for a total length of 5 metres @ Rs. 450% cum, is (A) Rs. 400 (B) Rs. 425 (C) Rs. 450 (D) Rs. 500

Description : The cost of the earthwork in excavation for the surface drain of cross-section shown in the given figure for a total length of 5 metres @ Rs. 450% cum, is (A) Rs. 400 (B) Rs. 425 (C) Rs. 450 (D) Rs. 500

Last Answer : (C) Rs. 450

Izzard formula for the time of concentration in minutes for the plots having no channels, is (where Lo is the length of overland flow in metres and Kp rainfall intensity in cm/hour) (A) T = 111 b. L0 1/3/(Kp)2/3 (B) T = 222 b. L0 1/2/(Kp)1/3 (C) T = 333 b. L0/Kp (D) T = 111 b. L0 1/3/(Kp)2/5

Description : Izzard formula for the time of concentration in minutes for the plots having no channels, is (where Lo is the length of overland flow in metres and Kp rainfall intensity in cm/hour) (A) T = 111 b. L0 1/3/(Kp)2/3 (B) T = 222 b. L0 1/2/(Kp)1/3 (C) T = 333 b. L0/Kp (D) T = 111 b. L0 1/3/(Kp)2/5

Last Answer : Answer: Option A

With the usual meanings of letters, the equation V = 400 I (D10²/4) is used for determining the velocity of ground water flow in metres per day. It is known as (A) Meinzer's formula (B) Slichter's formula (C) Darcy's formula (D) Hazen's formula

Description : With the usual meanings of letters, the equation V = 400 I (D10²/4) is used for determining the velocity of ground water flow in metres per day. It is known as (A) Meinzer's formula (B) Slichter's formula (C) Darcy's formula (D) Hazen's formula

Last Answer : Answer: Option B

The equation V = (1000 ID10²/60) × (1.8T + 42) which is used for determining the velocity of ground water flow in metres per day is known as (A) Meinzer's formula (B) Slichter's formula (C) Darcy's formula (D) Hazen formula

Description : The equation V = (1000 ID10²/60) × (1.8T + 42) which is used for determining the velocity of ground water flow in metres per day is known as (A) Meinzer's formula (B) Slichter's formula (C) Darcy's formula (D) Hazen formula

Last Answer : Answer: Option D

A ball is allowed to fall freely from a height of 3 metres on to a fixed plate. If the successive rebound heights are h1, h2, h3 a.5 metres b.4.25 metre c.0.5 metre d.1 metre e.Zero

Description : A ball is allowed to fall freely from a height of 3 metres on to a fixed plate. If the successive rebound heights are h1, h2, h3 a.5 metres b.4.25 metre c.0.5 metre d.1 metre e.Zero

Last Answer : a. 5 metres

The reduced levels of points, 30 metres apart along the longitudinal section of a road portion between chainages 5 and 9 are shown in the given figure. If there is a uniform up-gradient of the road 120 in 1, the chainage of the point with no filling or cutting is (A) (6 + 15) chains (B) (6 + 12) chains (C) (6 + 18) chains (D) None of these

Description : The reduced levels of points, 30 metres apart along the longitudinal section of a road portion between chainages 5 and 9 are shown in the given figure. If there is a uniform up-gradient of the road 120 in 1, the chainage ... 15) chains (B) (6 + 12) chains (C) (6 + 18) chains (D) None of these

Last Answer : (B) (6 + 12) chains

What is the frequency of a wave in which five waves pass a given point every second?

Description : What is the frequency of a wave in which five waves pass a given point every second?

Last Answer : That's 5 per second - or 5 hertz.

38% of 3976 +(32)2 – 13% of 8271 + 7/6 × 3400 =? a) 5427 b) 5325 c) 5537 d) 5612 e) 5554

Description : 38% of 3976 +(32)2 – 13% of 8271 + 7/6 × 3400 =? a) 5427 b) 5325 c) 5537 d) 5612 e) 5554

Last Answer : ?=3976 × (38/100) + 1024 – 8271 × (13 / 100) + (7/6) × 3400 =1510.88 + 1024-1075.23 + 3966.66 =5426.31 ≈ 5427 Answer: a)

If is the pull applied at the ends of tape in kg, is the length of tape between end marks in metres, is the weight of the tape in kg per metre run, then sag correction (A) C = w²l3 /24F² (B) C = w 3 l²/24F² (C) C = w²l3 /24F3 (D) C = 24w²l3 /80F

Description : If is the pull applied at the ends of tape in kg, is the length of tape between end marks in metres, is the weight of the tape in kg per metre run, then sag correction (A) C = w²l3 /24F² (B) C = w 3 l²/24F² (C) C = w²l3 /24F3 (D) C = 24w²l3 /80F

Last Answer : (A) C = w²l3 /24F²

If the velocity of moving vehicles on a road is 24 km/per hour, stopping distance is 19 metres and average length of vehicles is 6 metres, the basic capacity of lane, is (A) 500 vehicles per hour (B) 700 vehicles per hour (C) 1000 vehicles per hour (D) 1250 vehicles per hour

Description : If the velocity of moving vehicles on a road is 24 km/per hour, stopping distance is 19 metres and average length of vehicles is 6 metres, the basic capacity of lane, is (A) 500 vehicles per hour (B) 700 vehicles per hour (C) 1000 vehicles per hour (D) 1250 vehicles per hour

Last Answer : Answer: Option C

If is the angle of repose of soil of weight w kg/m3 , the horizontal pressure p at a depth of h metres per metre length of wall, is (A) wh × [(1 - sin )/(1 + )] (B) (wh/2) × [(1 - sin )/(1 + )] (C) wh - sin )/(1 + )] (D) wh )/(1 - )

Description : If is the angle of repose of soil of weight w kg/m3 , the horizontal pressure p at a depth of h metres per metre length of wall, is (A) wh × [(1 - sin )/(1 + )] (B) (wh/2) × [(1 - sin )/(1 + )] (C) wh - sin )/(1 + )] (D) wh )/(1 - )

Last Answer : Answer: Option A

What is the area of the corresponding major sector of a circle of radius 28 cm and the central angle 45 o ? (a) 4312 cm 2 (b) 2156 cm 2 (c) 1256 cm 2 (d) 3412 cm 2

Description : What is the area of the corresponding major sector of a circle of radius 28 cm and the central angle 45 o ? (a) 4312 cm 2 (b) 2156 cm 2 (c) 1256 cm 2 (d) 3412 cm 2

Last Answer : (b) 2156 cm 2

1357 + 294 + 487 -3412 +8765 -5793= ? a) 1444 b) 2588 c) 1698 d) 2155 e) 1241

Description : 1357 + 294 + 487 -3412 +8765 -5793= ? a) 1444 b) 2588 c) 1698 d) 2155 e) 1241

Last Answer : ? =(1357 + 294 +487+8765)-(3412+5793) =10903-9205=1698 Answer: c)

If A is the projected area of a vehicle in square metres, V is speed of the vehicles in kilometres per hour and C is a constant, then the wind resistance R to the moving vehicles, is given by (A) R = CAV (B) R = CAV2 (C) R = CAV3 (D) R = C 2AV

Description : If A is the projected area of a vehicle in square metres, V is speed of the vehicles in kilometres per hour and C is a constant, then the wind resistance R to the moving vehicles, is given by (A) R = CAV (B) R = CAV2 (C) R = CAV3 (D) R = C 2AV

Last Answer : Answer: Option B

If F is the fetch, the straight line distance of open water available in kilometres, the height of the wave in metres is (A) 0.15 (B) 0.20 (C) 0.28 (D) 0.34

Description : If F is the fetch, the straight line distance of open water available in kilometres, the height of the wave in metres is (A) 0.15 (B) 0.20 (C) 0.28 (D) 0.34

Last Answer : (D) 0.34

The section modulus of a rectangular light beam 25 metres long is 12.500 cm3 . The beam is simply supported at its ends and carries a longitudinal axial tensile load of 10 tonnes in addition to a point load of 4 tonnes at the centre. The maximum stress in the bottom most fibre at the mid span section, is (A) 13.33 kg/cm2 tensile (B) 13.33 kg/cm2 compressive (C) 26.67 kg/cm2 tensile (D) 26.67 kg/cm2 compressive

Description : The section modulus of a rectangular light beam 25 metres long is 12.500 cm3 . The beam is simply supported at its ends and carries a longitudinal axial tensile load of 10 tonnes in addition to a point load of ... 13.33 kg/cm2 compressive (C) 26.67 kg/cm2 tensile (D) 26.67 kg/cm2 compressive

Last Answer : (C) 26.67 kg/cm2 tensile

An R.C.C. beam of 25 cm width and 50 cm effective depth has a clear span of 6 metres and carries a U.D.L. of 3000 kg/m inclusive of its self weight. If the lever arm constant for the section is 0.865, the maximum intensity of shear stress, is (A) 8.3 kg/cm2 (B) 7.6 kg/cm2 (C) 21.5 kg/cm2 (D) 11.4 kg/cm2

Description : An R.C.C. beam of 25 cm width and 50 cm effective depth has a clear span of 6 metres and carries a U.D.L. of 3000 kg/m inclusive of its self weight. If the lever arm constant for the section is 0.865, the maximum intensity ... , is (A) 8.3 kg/cm2 (B) 7.6 kg/cm2 (C) 21.5 kg/cm2 (D) 11.4 kg/cm2

Last Answer : Answer: Option A

An R.C.C beam of 25 cm width has a clear span of 5 metres and carries a U.D.L. of 2000 kg/m inclusive of its self weight. If the lever arm of the section is 45 cm., the beam is (A) Safe in shear (B) Is safe with stirrups (C) Is safe with stirrups and inclined members (D) Needs revision of the section

Description : An R.C.C beam of 25 cm width has a clear span of 5 metres and carries a U.D.L. of 2000 kg/m inclusive of its self weight. If the lever arm of the section is 45 cm., the beam is ( ... shear (B) Is safe with stirrups (C) Is safe with stirrups and inclined members (D) Needs revision of the section

Last Answer : Answer: Option A

For calculation of economical diameter D of a pipe in metres for a discharge Q to be pumped in cumecs, Lea suggested the empirical formula (A) D = 0.22 Q (B) D = 1.22 Q (C) D = 2.22 Q (D) D = 3.22 Q

Description : For calculation of economical diameter D of a pipe in metres for a discharge Q to be pumped in  cumecs, Lea suggested the empirical formula  (A) D = 0.22 Q (B) D = 1.22 Q (C) D = 2.22 Q (D) D = 3.22 Q

Last Answer : (B) D = 1.22 Q

What happens to light waves when they pass through slits in a barrier The wave model of light?

Description : What happens to light waves when they pass through slits in a barrier The wave model of light?

Last Answer : Need answer

What is the frequency of these waves As you sit on a dock you notice a wave crest pass. You count another four wave crests in the next 12 seconds?

Description : What is the frequency of these waves As you sit on a dock you notice a wave crest pass. You count another four wave crests in the next 12 seconds?

Last Answer : 20 waves per minute. (or 1 every 3 seconds)

Two sources of light are said to be coherent if __________. A. they produce waves of the same wave length B. they have the same amplitude of vibration C. they produce waves in the medium simultaneously D. they produce waves of the same amplitude

Description : Two sources of light are said to be coherent if __________. A. they produce waves of the same wave length B. they have the same amplitude of vibration C. they produce waves in the medium simultaneously D. they produce waves of the same amplitude

Last Answer : D. they produce waves of the same amplitude

If the formation level of a highway has a uniform gradient for a particular length, and the ground is also having a longitudinal slope, the earthwork may be calculated by (A) Mid-section formula (B) Trapezoidal formula (C) Prismoidal formula (D) All the above

Description : If the formation level of a highway has a uniform gradient for a particular length, and the ground is also having a longitudinal slope, the earthwork may be calculated by (A) Mid-section formula (B) Trapezoidal formula (C) Prismoidal formula (D) All the above

Last Answer : (D) All the above

Sakthi running at 27 kmph alongside a railway track in 272 metres ahead of the engine of a 240 metres long train running at 135 kmph in the same direction. In how much time will the train pass sakthi? A) 24 B) 29 C) 36 D) 17

Description :  Sakthi running at 27 kmph alongside a railway track in 272 metres ahead of the engine of a 240 metres long train running at 135 kmph in the same direction. In how much time will the train pass sakthi? A) 24 B) 29 C) 36 D) 17

Last Answer : ANSWER:D  Explanation:  Speed of the train = 135 kmph  Speed of sakthi = 27 kmph  Speed of train relative to sakthi = (135-27) kmph  =108 kmph  We have to find the time in seconds, so convert ... of the train = Distance / Time  Therefore Time taken = ( 512 / 30) sec  = 17 sec

How many days pass between two successive full moon nights?

Description : How many days pass between two successive full moon nights?

Last Answer : How many days pass between two successive full moon nights?

Pick up the correct statement from the following: (A) The surface defined by the locus of points having same phase, is called a wave front (B) The wave whose surface of constant phase are parallel planes, is known as a plane wave (C) The relative phase difference between the waves is important and not the absolute phase of a point on the wave (D) All of these

Description : Pick up the correct statement from the following: (A) The surface defined by the locus of points having same phase, is called a wave front (B) The wave whose surface of constant phase are parallel planes, ... waves is important and not the absolute phase of a point on the wave (D) All of these

Last Answer : Answer: Option D

If the length of a combined footing for two columns l metres apart is L and the projection on the left side of the exterior column is x, then the projection y on the right side of the exterior column, in order to have a uniformly distributed load, is (where is the distance of centre of gravity of column loads). (A) y = L - (l - ) (B) y = L/2 + (l - ) (C) y = L/2 - (l + ) (D) y = L/2 - (l - )

Description : If the length of a combined footing for two columns l metres apart is L and the projection on the left side of the exterior column is x, then the projection y on the right side of the exterior column, in order to have a uniformly distributed ... l - ) (C) y = L/2 - (l + ) (D) y = L/2 - (l - )

Last Answer : Answer: Option D

If L is the length of vehicles in metres, C is the clear distance between two consecutive vehicles (stopping sight distance), V is the speed of vehicles in km/hour, the maximum number N of vehicles/hour, is (A) N = 1000 V / (L + C) (B) N = (L + C) / 1000 V (C) N = 1000 L / (C + V) (D) N = 1000 C / (L + V)

Description : If L is the length of vehicles in metres, C is the clear distance between two consecutive vehicles (stopping sight distance), V is the speed of vehicles in km/hour, the maximum number N of vehicles/hour, is (A) N = 1000 V / (L + C ... ) / 1000 V (C) N = 1000 L / (C + V) (D) N = 1000 C / (L + V)

Last Answer : Answer: Option A

If N is the algebraic difference of grades, S is the minimum sight distance in metres, the length (L) of a summit curve is (A) NS/4 (B) NS²/4 (C) N²S/4(D) (NS)²/4

Description : If N is the algebraic difference of grades, S is the minimum sight distance in metres, the length (L) of a summit curve is (A) NS/4 (B) NS²/4 (C) N²S/4 (D) (NS)²/4

Last Answer : Answer: Option B

Pick up the correct statement from the following: (A) Long tangent sections exceeding 3 km in length should be avoided (B) Curve length should be at least 150 metres for a deflection angle of 5 degree (C) For every degree decrease in the deflection angle, 30 metre length of curve to be increased (D) All the above

Description : Pick up the correct statement from the following: (A) Long tangent sections exceeding 3 km in length should be avoided (B) Curve length should be at least 150 metres for a deflection angle of 5 ... decrease in the deflection angle, 30 metre length of curve to be increased (D) All the above

Last Answer : Answer: Option D

If N is the net difference of grades, S is the minimum overtaken sight distance in metres, the length (L) of a summit curve, is (A) NS/4 (B) NS²/4 (C) NS²/4.8 (D) NS²/9.6

Description : If N is the net difference of grades, S is the minimum overtaken sight distance in metres, the length (L) of a summit curve, is (A) NS/4 (B) NS²/4 (C) NS²/4.8 (D) NS²/9.6

Last Answer : Answer: Option D

If N is the algebraic difference of grades, S is the head light beam distance in metres, the length (L) of a valley curve, is (A) NS²/4 (B) NS²/6 (C) NS²/9.6 (D) NS²/4.8

Description : If N is the algebraic difference of grades, S is the head light beam distance in metres, the length (L) of a valley curve, is (A) NS²/4 (B) NS²/6 (C) NS²/9.6 (D) NS²/4.8

Last Answer : Answer: Option A

If degree of a road curve is defined by assuming the standard length of an arc as 30 metres, the radius of 1° curve is equal (A) 1719 m (B) 1146 m (C) 1046 m (D) 1619 m

Description : If degree of a road curve is defined by assuming the standard length of an arc as 30 metres, the radius of 1° curve is equal (A) 1719 m (B) 1146 m (C) 1046 m (D) 1619 m

Last Answer : Answer: Option A

While estimating the qualities for the construction of a building, the correct metric unit is (A) Metre for length (B) Cubic metre for area (C) Square metres for volume (D) Litre for capacity

Description : While estimating the qualities for the construction of a building, the correct metric unit is (A) Metre for length (B) Cubic metre for area (C) Square metres for volume (D) Litre for capacity

Last Answer : (D) Litre for capacity

In the method of tube boring of soil investigation, the following is essential: (A) A tube of about 2 metres length and 20 cm diameter with a cutting edge (B) A flap valve at the bottom of tube is provided to extract the soil sample (C) The tube is raised and lowered by 4 thick rope moving over a pulley suspended on a tripod stand (D) All the above

Description : In the method of tube boring of soil investigation, the following is essential: (A) A tube of about 2 metres length and 20 cm diameter with a cutting edge (B) A flap valve at the bottom of tube is ... and lowered by 4 thick rope moving over a pulley suspended on a tripod stand (D) All the above

Last Answer : Answer: Option D

What is The distance between two successive points of a wave that are in phase is?

Description : What is The distance between two successive points of a wave that are in phase is?

Last Answer : the wavelength

A travelling wave passes a point of observation where the time interval between successive crests is 0.2 s. Which of the following is then true? (a) The wavelength is 5 m (b) The wavelength is 0.2 m (c) The velocity of propagation is 5 m/s (d) The frequency of 5 Hz.

Description : A travelling wave passes a point of observation where the time interval between successive crests is 0.2 s. Which of the following is then true? (a) The wavelength is 5 m (b) The wavelength is 0.2 m (c) The velocity of propagation is 5 m/s (d) The frequency of 5 Hz.

Last Answer : Ans:(d)

Assertion A: Intervention of undulations in the sea bed reduces the depth of wave at the section. Reason R: No wave can have a height greater than the depth of water through which it passes Select your answer based on the coding system given below: (A) Both A and R is true and R is correct explanation of A (B) Both A and R is true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true

Description : Assertion A: Intervention of undulations in the sea bed reduces the depth of wave at the section. Reason R: No wave can have a height greater than the depth of water through which it passes Select your answer based on ... of A (C) A is true but R is false (D) A is false but R is true

Last Answer : (A) Both A and R is true and R is correct explanation of A

Does anyone know of a Pokémon Mini emulator for the NDS?

Description : Does anyone know of a Pokémon Mini emulator for the NDS?

Last Answer : http://www.google.co.uk/search?hl=en&q=Pok%C3%A9mon+Mini+emulator+for+the+NDS&btnG=Google+Search&meta=&aq=f&oq=

GBA emu for NDS?

Description : GBA emu for NDS?

Last Answer : At the moment, there is nothing that you can really do to play gba games on a DSi. I'm in the same boat as you. :( The main problem is that the original DS and DS light have both a ... power. So the possibility of someone writing an emulator is possible, but it still may not emulate at full speed.

Does anyone know how to get a SAV off an NDS retail cart?

Description : Does anyone know how to get a SAV off an NDS retail cart?

Last Answer : You must have a special cart with homebrew running to the best of my knowledge. You can’t pull SAV files from the DS otherwise, because there is not way to connect to you computer.

Do you play NDS (Nintendo Dual Screen) games with emulator?

Description : Do you play NDS (Nintendo Dual Screen) games with emulator?

Last Answer : You mean with a linker ? Or older game not made for DS ?

_______ is used for electronic dealing and reporting of transactions in government securities A. Delivery versus Payment (DvP) B. Negotiated Dealing System (NDS) C. Risk Mitigation D. All of the Above E. None of the Above

Description : _______ is used for electronic dealing and reporting of transactions in government securities A. Delivery versus Payment (DvP) B. Negotiated Dealing System (NDS) C. Risk Mitigation D. All of the Above E. None of the Above

Last Answer : B. Negotiated Dealing System (NDS) Explanation: The Negotiated Dealing System (NDS) for electronic dealing and reporting of transactions in government securities was introduced in February ... , bids or applications for primary issuance of Government Securities when auctions are conducted.

Norms for No. of seats at recommended level at Cat. E stn. is (a) 0.4 Ndb (b) 0.4 Nds* (c) 0.4 Nmax (d) 100 on each P.F.

Description : Norms for No. of seats at recommended level at Cat. E stn. is (a) 0.4 Ndb (b) 0.4 Nds* (c) 0.4 Nmax (d) 100 on each P.F.

Last Answer : (b) 0.4 Nds*

Norms for No. of seats at recommended level at Cat. D stn. is (a) 0.4 Ndb (b) 0.4 Nds* (c) 0.4 Nmax (d) 100 on each P.F.

Description : Norms for No. of seats at recommended level at Cat. D stn. is (a) 0.4 Ndb (b) 0.4 Nds* (c) 0.4 Nmax (d) 100 on each P.F.

Last Answer : (b) 0.4 Nds*

Norms for No. of seats at recommended level at Cat. C stn. is (a) 0.4 Ndb (b) 0.4 Nds* (c) 0.4 Nmax (d) 100 on each P.F.

Description : Norms for No. of seats at recommended level at Cat. C stn. is (a) 0.4 Ndb (b) 0.4 Nds* (c) 0.4 Nmax (d) 100 on each P.F.

Last Answer : (b) 0.4 Nds*

Norms for No. of seats at recommended level at Cat. B stn. is (a) 0.4 Ndb * (b) 0.4 Nds (c) 0.4 Nmax (d) 100 on each P.F.

Description : Norms for No. of seats at recommended level at Cat. B stn. is (a) 0.4 Ndb * (b) 0.4 Nds (c) 0.4 Nmax (d) 100 on each P.F.

Last Answer : (a) 0.4 Ndb

Norms for No. of seats at recommended level at Cat. A stn. is (a) 0.4 Ndb* (b) 0.4 Nds (c) 0.4 Nmax (d) 100 on each P.F.

Description : Norms for No. of seats at recommended level at Cat. A stn. is (a) 0.4 Ndb* (b) 0.4 Nds (c) 0.4 Nmax (d) 100 on each P.F.

Last Answer : (a) 0.4 Ndb*