Due to the impact of water wave on a sea shore structure (A) Hydrostatic pressure coupled with a strong momentary impact is caused (B) Vibrations are subjected (C) Internal pressure is developed (D) All of the above

Due to the impact of water wave on a sea shore structure
(A) Hydrostatic pressure coupled with a strong momentary impact is caused
(B) Vibrations are subjected
(C) Internal pressure is developed
(D) All of the above
by

1 Answer

Answer :

(D) All of the above
by

Related questions

On the sea shore structures, the water wave impact causes (A) Direct compressive force due to its horizontal component (B) Shear force due to deflected vertical force (C) Compressive force due to collapse of the wave (D) All of the above

Description : On the sea shore structures, the water wave impact causes (A) Direct compressive force due to its horizontal component (B) Shear force due to deflected vertical force (C) Compressive force due to collapse of the wave (D) All of the above

Last Answer : (D) All of the above

Littoral drift (A) Is the raised line of sand, parallel to the sea coast (B) Is the slow movement of surface water at sea caused by the wind (C) Is a current parallel to the shore, caused due to tangential component of the wind (D) Is a current perpendicular to the shore line caused due to wind

Description : Littoral drift (A) Is the raised line of sand, parallel to the sea coast (B) Is the slow movement of surface water at sea caused by the wind (C) Is a current parallel to the shore, caused due to tangential component of the wind (D) Is a current perpendicular to the shore line caused due to wind

Last Answer : (C) Is a current parallel to the shore, caused due to tangential component of the wind

Pick up the incorrect statement from the following: (A) As a wave of sea water approaches the coast line, it is generally accompanied by a drift of water in the direction of wave advance (B) The on-shore wind helps to produce wave action as well as rise of M.S.L. (C) A falling hydraulic gradient occurs in the direction of the wave (D) The wave while receding carries finer particles out to deep water

Description : Pick up the incorrect statement from the following: (A) As a wave of sea water approaches the coast line, it is generally accompanied by a drift of water in the direction of wave advance (B) ... in the direction of the wave (D) The wave while receding carries finer particles out to deep water

Last Answer : (C) A falling hydraulic gradient occurs in the direction of the wave

The hydrostatic pressure developed due to the accumulation of water absorb by the root is called root pressure.

Description : The hydrostatic pressure developed due to the accumulation of water absorb by the root is called root pressure.

Last Answer : Ans. Root pressure

Stability of an existing structure may be disturbed by (A) Rising of water table (B) Vibrations caused by traffic movements (C) Mining in the neighbourhood (D) All the above

Description : Stability of an existing structure may be disturbed by (A) Rising of water table (B) Vibrations caused by traffic movements (C) Mining in the neighbourhood (D) All the above

Last Answer : Answer: Option D

A pressure conduit laid underground, may not be subjected to (A) Internal pressure of water (B) Pressure due to external load (C) Longitudinal temperature stress (D) Longitudinal stresses due to unbalanced pressure to bends

Description : A pressure conduit laid underground, may not be subjected to  (A) Internal pressure of water  (B) Pressure due to external load  (C) Longitudinal temperature stress  (D) Longitudinal stresses due to unbalanced pressure to bends 

Last Answer : (C) Longitudinal temperature stress 

The pressure that builds up in pore water due to load increment on the soil, is termed (A) Excess pore pressure (B) Excess hydrostatic pressure (C) Hydrodynamic pressure (D) All the above

Description : The pressure that builds up in pore water due to load increment on the soil, is termed (A) Excess pore pressure (B) Excess hydrostatic pressure (C) Hydrodynamic pressure (D) All the above

Last Answer : Answer: Option D

Singing of telephone wires in the wind occurs due to : (a) Vibrations caused by birds as they sit on or get off, the wires (b) Tensioning at the ends (c) Magnus effect (d) Generation of Karman Vortex street

Description : Singing of telephone wires in the wind occurs due to : (a) Vibrations caused by birds as they sit on or get off, the wires (b) Tensioning at the ends (c) Magnus effect (d) Generation of Karman Vortex street

Last Answer : (d) Generation of Karman Vortex street

Question No. 51 A low wall built out into the sea more or less perpendicular to the coast line, to resist the travel of sand and shingle along a beach, is called (A) Break water (B) Break wall (C) Groins (D) Shore wall

Description : Question No. 51 A low wall built out into the sea more or less perpendicular to the coast line, to resist the travel of sand and shingle along a beach, is called (A) Break water (B) Break wall (C) Groins (D) Shore wall

Last Answer : (C) Groins

Which of the following structures are constructed parallel to shore line to develop a demarcating line between land area and water area? (A) Sea walls, bulk heads and groynes (B) Sea walls, bulk heads and revetments (C) Sea walls, revetments and groynes (D) Bulk heads, revetments and groynes

Description : Which of the following structures are constructed parallel to shore line to develop a demarcating line between land area and water area? (A) Sea walls, bulk heads and groynes (B) Sea walls, bulk heads and revetments (C) Sea walls, revetments and groynes (D) Bulk heads, revetments and groynes

Last Answer : (B) Sea walls, bulk heads and revetments

Assertion A: Large size stones are required in stone revetment in shore protection. Reason R: Resistance of stone to wave force is proportional to its volume and wave force is proportional to the exposed area of the stone. Select your answer based on the coding system given below. (A) Both A and R is true and R is the correct explanation of A (B) Both A and R is true but R is not a correct explanation of A (C) A is true but R is false (D) A is false but R is true

Description : Assertion A: Large size stones are required in stone revetment in shore protection. Reason R: Resistance of stone to wave force is proportional to its volume and wave force is proportional to the exposed area of the stone. ... of A (C) A is true but R is false (D) A is false but R is true

Last Answer : (A) Both A and R is true and R is the correct explanation of A

Which one of the following statements is not relevant to hydrographic survey? (A) Establishment of a chain of bench marks near the shore line (B) Establishment of horizontal control points on the shore (C) Determination of the sea bed profile (D) None of these

Description : Which one of the following statements is not relevant to hydrographic survey? (A) Establishment of a chain of bench marks near the shore line (B) Establishment of horizontal control points on the shore (C) Determination of the sea bed profile (D) None of these

Last Answer : (D) None of these

Which of the following type of sea walls results in greatest protection of shore structures? (A) Vertical sea wall (B) Sea wall with batter (C) Stepped sea wall (D) Sea wall with concave face

Description : Which of the following type of sea walls results in greatest protection of shore structures? (A) Vertical sea wall (B) Sea wall with batter (C) Stepped sea wall (D) Sea wall with concave face

Last Answer : (D) Sea wall with concave face

Which of the following structures protects the shore by trapping of littoral drift? (A) Groynes (B) Sea walls (C) Revetments (D) Moles

Description : Which of the following structures protects the shore by trapping of littoral drift? (A) Groynes (B) Sea walls (C) Revetments (D) Moles

Last Answer : (A) Groynes

Surf zone is: (A) The fathom line of 10 m depth (B) The fathom line of 5 m depth (C) The swell of the sea breaking on the shore or reefs (D) The coast line attacked by the waves

Description : Surf zone is: (A) The fathom line of 10 m depth (B) The fathom line of 5 m depth (C) The swell of the sea breaking on the shore or reefs (D) The coast line attacked by the waves

Last Answer : (C) The swell of the sea breaking on the shore or reefs

Pick up the correct statement from the following: (A) Sand obtained from pits, is washed to remove clay and silt (B) Sand obtained from flooded pits, need not be washed before use (C) The chloride in sea shore sand and shingle may cause corrosion of reinforcement if the concrete is porous (D) All the above

Description : Pick up the correct statement from the following: (A) Sand obtained from pits, is washed to remove clay and silt (B) Sand obtained from flooded pits, need not be washed before use (C) The ... shore sand and shingle may cause corrosion of reinforcement if the concrete is porous (D) All the above

Last Answer : Answer: Option D

An open-ended cylinder of radius and thickness is subjected to internal pressure . The Young's modulus for the material is and Poisson's ratio is . The longitudinal strain is (A) Zero (B) pr/TE (C) pr/2TE (D) None of these

Description : An open-ended cylinder of radius and thickness is subjected to internal pressure . The Young's modulus for the material is and Poisson's ratio is . The longitudinal strain is (A) Zero (B) pr/TE (C) pr/2TE (D) None of these

Last Answer : (A) Zero

A temporary rigid structure having platforms to enable masons to work at different stages of a building, is known as (A) Scaffolding (B) Dead shore (C) Raking shore (D) Under pinning

Description : A temporary rigid structure having platforms to enable masons to work at different stages of a building, is known as (A) Scaffolding (B) Dead shore (C) Raking shore (D) Under pinning

Last Answer : Answer: Option A

When air is warm, it rises and leaves an area of low pressure which becomes filled with sinking cold air. After a hot, sunny day, the land cools faster than the sea. What is likely to happen after a hot, sunny day on the sea shore?

Description : When air is warm, it rises and leaves an area of low pressure which becomes filled with sinking cold air. After a hot, sunny day, the land cools faster than the sea. What is likely to happen after a hot, sunny day on the sea shore?

Last Answer : When air is warm, it rises and leaves an area of low pressure which becomes filled with sinking cold air. After a hot, sunny day, the land cools faster than the sea. What is likely to happen after a hot, sunny day on the sea shore?

Which type of joints is better when the product is subjected to large vibrations: welded or threaded? a) Welded b) Threaded c) Both have same results d) Depends on the magnitude of the vibrational force

Description : Which type of joints is better when the product is subjected to large vibrations: welded or threaded? a) Welded b) Threaded c) Both have same results d) Depends on the magnitude of the vibrational force

Last Answer : a) Welded

When a body is subjected to transverse vibrations, the stress induced in a body will be A Shear stress B Bending stress C Tensile stress D Compressive stress

Description : When a body is subjected to transverse vibrations, the stress induced in a body will be A Shear stress B Bending stress C Tensile stress D Compressive stress

Last Answer : B Bending stress

During transverse vibrations, shaft is subjected to which type of stresses? A) Tensile stresses B) Torsional shear stress C) Bending stresses D) All of the above

Description : During transverse vibrations, shaft is subjected to which type of stresses? A) Tensile stresses B) Torsional shear stress C) Bending stresses D) All of the above

Last Answer : C) Bending stresses

When a body is subjected to transverse vibrations, the stress induced in a body B will be (A) Shear stress (B) Bending stress (C) Tensile stress (D)Compressive stress

Description : When a body is subjected to transverse vibrations, the stress induced in a body B will be (A) Shear stress (B) Bending stress (C) Tensile stress (D)Compressive stress

Last Answer : (B) Bending stress

When a body is subjected to transverse vibrations, the stress induced in a body will be a) shear stress b) bending stress c) tensile stress d) compressive stress

Description : When a body is subjected to transverse vibrations, the stress induced in a body will be a) shear stress b) bending stress c) tensile stress d) compressive stress

Last Answer : b) bending stress

During transverse vibrations, shaft is subjected to which type of stresses? a. Tensile stresses b. Torsional shear stress c. Bending stresses d. All of the above

Description : During transverse vibrations, shaft is subjected to which type of stresses? a. Tensile stresses b. Torsional shear stress c. Bending stresses d. All of the above

Last Answer : c. Bending stresses

When a body is subjected to transverse vibrations, the stress induced in a body will be a) shear stress b) bending stress c) tensile stress d) compressive stress

Description : When a body is subjected to transverse vibrations, the stress induced in a body will be a) shear stress b) bending stress c) tensile stress d) compressive stress

Last Answer : b) bending stress

When a body is subjected to transverse vibrations, the stress induced in a body will be a) shear stress b) tensile stress c) compressive stress d) none of the mentioned

Description : When a body is subjected to transverse vibrations, the stress induced in a body will be a) shear stress b) tensile stress c) compressive stress d) none of the mentioned

Last Answer : b) tensile stress

Pick up the correct statement from the following: (A) The internal pressure within a pipe, is caused due to water head and hammer pressure (B) In pressure pipes with water at rest, the pressure is equal to water head (C) Sudden closure of a valve, causes the water hammer pressure (D) All the above

Description : Pick up the correct statement from the following:  (A) The internal pressure within a pipe, is caused due to water head and hammer pressure  (B) In pressure pipes with water at rest, the pressure ... (C) Sudden closure of a valve, causes the water hammer pressure  (D) All the above 

Last Answer : (D) All the above 

Pick up the incorrect statement from the following: (A) The smaller the size of the pores, the higher the water can rise above the water table (B) Below the water table, the pore water may be static (C) The hydrostatic pressure depends on the depth below the water level (D) None of these

Description : Pick up the incorrect statement from the following: (A) The smaller the size of the pores, the higher the water can rise above the water table (B) Below the water table, the pore water may be static (C) The hydrostatic pressure depends on the depth below the water level (D) None of these

Last Answer : Answer: Option D

The hydrostatic pressure generated within the cell against cell wall as a result of entry of water into it, due to osmosis.

Description : The hydrostatic pressure generated within the cell against cell wall as a result of entry of water into it, due to osmosis.

Last Answer : Ans. Turgor pressure

The areas of cross-section of a square beam and a circular beam subjected to equal bending moments, are same. (A) Circular beam is more economical (B) Square beam is more economical (C) Both the beams are equally strong (D) Both the beams are equally economical

Description : The areas of cross-section of a square beam and a circular beam subjected to equal bending  moments, are same.  (A) Circular beam is more economical  (B) Square beam is more economical  (C) Both the beams are equally strong  (D) Both the beams are equally economical 

Last Answer : (B) Square beam is more economical 

In basins subjected to strong winds and tide, the length of the berthing area should not be less than (A) The length of design vessel (B) The length of design vessel + 10% clearance between adjacent vessels (C) The length of design vessel + 20% clearance between adjacent vessels (D) Twice the length of design vessel

Description : In basins subjected to strong winds and tide, the length of the berthing area should not be less than (A) The length of design vessel (B) The length of design vessel + 10% clearance ... The length of design vessel + 20% clearance between adjacent vessels (D) Twice the length of design vessel

Last Answer : (C) The length of design vessel + 20% clearance between adjacent vessels

The maximum pressure which the pipe can withstand without any leakage during hydrostatic pressure test, is called (A) Working pressure (B) Design pressure (C) Test pressure (D) Hydrostatic pressure

Description : The maximum pressure which the pipe can withstand without any leakage during hydrostatic pressure test, is called (A) Working pressure (B) Design pressure (C) Test pressure (D) Hydrostatic pressure

Last Answer : (C) Test pressure

A phreatic line is defined as the line within a dam section below which there are (A) Positive equipotential lines (B) Positive hydrostatic pressure (C) Negative hydrostatic pressure (D) Negative equipotential lines

Description : A phreatic line is defined as the line within a dam section below which there are (A) Positive equipotential lines (B) Positive hydrostatic pressure (C) Negative hydrostatic pressure (D) Negative equipotential lines

Last Answer : (B) Positive hydrostatic pressure

Flow net is used for the determination of (A) Quantity of seepage (B) Hydrostatic pressure (C) Seepage pressure (D) All the above

Description : Flow net is used for the determination of (A) Quantity of seepage (B) Hydrostatic pressure (C) Seepage pressure (D) All the above

Last Answer : (D) All the above

A flow net may be utilised for the determination of (A) Exit gradient (B) Seepage (C) Hydrostatic pressure (D) All the above

Description : A flow net may be utilised for the determination of (A) Exit gradient (B) Seepage (C) Hydrostatic pressure (D) All the above

Last Answer : Answer: Option D

The uplift pressure on the face of a drainage gallery in a dam is taken as (A) Hydrostatic pressure at toe (B) Average of hydrostatic pressure at toe and heel (C) Two-third of hydrostatic pressure at toe plus one-third of hydrostatic pressure at heel (D) None of the above

Description : The uplift pressure on the face of a drainage gallery in a dam is taken as (A) Hydrostatic pressure at toe (B) Average of hydrostatic pressure at toe and heel (C) Two-third of hydrostatic pressure at toe plus one-third of hydrostatic pressure at heel (D) None of the above

Last Answer : Answer: Option C

Choose the wrong statement (A) The horizontal component of the hydrostatic force on any surface is equal to the normal force on the vertical projection of the surface (B) The horizontal component acts through the center of pressure for the vertical projection (C) The vertical component of the hydrostatic force on any surface is equal to the weight of the volume of the liquid above the area (D) The vertical component passes through the center of pressure of the volume

Description : Choose the wrong statement (A) The horizontal component of the hydrostatic force on any surface is equal to the normal force on the vertical projection of the surface (B) The horizontal component ... above the area (D) The vertical component passes through the center of pressure of the volume

Last Answer : Answer: Option D

Consider the following statements: 1. Mathematically speaking, the time taken for 100% consolidation is infinite. 2. The time factor for a particular average degree of consolidation depends upon the distribution of initial excess hydrostatic pressure. 3. Secondary consolidation obeys Terzaghi’s one-dimensional theory of consolidation. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements: 1. Mathematically speaking, the time taken for 100% consolidation is infinite. 2. The time factor for a particular average degree of consolidation depends upon the distribution of initial excess hydrostatic ... 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (b) 1 & 2 only

What are deterministic vibrations? * (A)Vibrations caused due to known exciting force (B)Vibrations caused due to unknown exciting force (c) Vibrations which are aperiodic in nature (D) None of the above

Description : What are deterministic vibrations? * (A)Vibrations caused due to known exciting force (B)Vibrations caused due to unknown exciting force (c) Vibrations which are aperiodic in nature (D) None of the above

Last Answer : (A)Vibrations caused due to known exciting force

Deterministic vibrations are A Vibrations caused due to unknown exciting force B Vibrations caused due to known exciting force C Vibrations which are aperiodic in nature D None of the mentioned

Description : Deterministic vibrations are A Vibrations caused due to unknown exciting force B Vibrations caused due to known exciting force C Vibrations which are aperiodic in nature D None of the mentioned

Last Answer : B Vibrations caused due to known exciting force

What are deterministic vibrations? a. Vibrations caused due to known exciting force b. Vibrations caused due to unknown exciting force c. Vibrations which are aperiodic in nature d. None of the above

Description : What are deterministic vibrations? a. Vibrations caused due to known exciting force b. Vibrations caused due to unknown exciting force c. Vibrations which are aperiodic in nature d. None of the above

Last Answer : a. Vibrations caused due to known exciting force

A shaft is subjected to bending moment M and a torque T simultaneously. The ratio of the maximum bending stress to maximum shear stress developed in the shaft, is (A) M/T (B) T/M (C) 2M/T (D) 2T/M

Description : A shaft is subjected to bending moment M and a torque T simultaneously. The ratio of the  maximum bending stress to maximum shear stress developed in the shaft, is  (A) M/T (B) T/M (C) 2M/T (D) 2T/M

Last Answer : (C) 2M/T

A compound bar consists of two bars of equal length. Steel bar cross-section is 3500 mm2 and that of brass bar is 3000 mm2 . These are subjected to a compressive load 100,000 N. If Eb = 0.2 MN/mm2 and Eb = 0.1 MN/mm2 , the stresses developed are: (A) b = 10 N/mm2s = 20 N/mm2(B) b = 8 N/mm2s = 16 N/mm2(C) b = 6 N/mm2s = 12 N/mm2(D) b = 5 N/mm2s = 10 N/mm

Description : A compound bar consists of two bars of equal length. Steel bar cross-section is 3500 mm2 and that  of brass bar is 3000 mm2 . These are subjected to a compressive load 100,000 N. If Eb = 0.2  MN/mm2  and Eb = 0.1 ... 6 N/mm2 s  = 12 N/mm2 (D) b = 5 N/mm2 s  = 10 N/mm

Last Answer : (A) b = 10 N/mm2 s  = 20 N/mm

If a steel rod of 20 mm diameter and 5 metres long elongates by 2.275 mm when subjected to an axial pull of 3000 kg, the stress developed, is (A) 9.5541 kg/cm2 (B) 95.541 kg/cm2 (C) 955.41 kg/cm2 (D) 9554.1 kg/cm

Description : If a steel rod of 20 mm diameter and 5 metres long elongates by 2.275 mm when subjected to an  axial pull of 3000 kg, the stress developed, is  (A) 9.5541 kg/cm2 (B) 95.541 kg/cm2 (C) 955.41 kg/cm2 (D) 9554.1 kg/cm

Last Answer : (C) 955.41 kg/cm2

If a steel rod of 20 mm diameter and 5 metres long elongates by 2.275 mm when subjected to an axial pull of 3000 kg, the stress developed, is (A) 9.5541 kg/cm2 (B) 95.541 kg/cm2 (C) 955.41 kg/cm2 (D) 9554.1 kg/cm

Description : If a steel rod of 20 mm diameter and 5 metres long elongates by 2.275 mm when subjected to an  axial pull of 3000 kg, the stress developed, is  (A) 9.5541 kg/cm2 (B) 95.541 kg/cm2 (C) 955.41 kg/cm2 (D) 9554.1 kg/cm

Last Answer : (C) 955.41 kg/cm2

In case of an eccentric loading on a bracket subjected to moment M, the tangential force developed in any rivet, at right angles to its radius vector r is (A) Mr/ r² (B) r²/Mr(C) Mr²/ r² (D) Mr/ r²

Description : In case of an eccentric loading on a bracket subjected to moment M, the tangential force  developed in any rivet, at right angles to its radius vector r is  (A) Mr/ r²  (B) r²/Mr (C) Mr²/ r²  (D) Mr/ r² 

Last Answer : (A) Mr/ r² 

A closely coiled helical spring of radius R, contains n turns and is subjected to an axial loadW. If the radius of the coil wire is r and modulus of rigidity of the coil material is C, the stress developed in the helical spring is (A) WR/ 3 (B) 2WR/ 3 (C) 2WR/ 2 (D) 4WR/ 2

Description : A closely coiled helical spring of radius R, contains n turns and is subjected to an axial loadW. If the radius of the coil wire is r and modulus of rigidity of the coil material is C, the stress developed in the helical spring is (A) WR/ 3 (B) 2WR/ 3 (C) 2WR/ 2 (D) 4WR/ 2

Last Answer : (B) 2WR/ 3

Pick up the correct statement from the following: (A) An unconfined compression test is a special case of triaxial compression test (B) An unconfined compression test is a special case of direct shear test (C) The confining pressure is maximum during an unconfined compression test (D) The cylindrical specimen of a soil is subjected to major principal stress till it fails due to shearing along the plane of the failure

Description : Pick up the correct statement from the following: (A) An unconfined compression test is a special case of triaxial compression test (B) An unconfined compression test is a special case of direct ... subjected to major principal stress till it fails due to shearing along the plane of the failure

Last Answer : Option A

When a vertical wall is subjected to pressures due to liquid on both sides, the resultant pressure is the __________ of the two pressures. (A) Sum (B) Difference (C) Arithmetic mean (D) Geometric mean

Description : When a vertical wall is subjected to pressures due to liquid on both sides, the resultant pressure is the __________ of the two pressures. (A) Sum (B) Difference (C) Arithmetic mean (D) Geometric mean

Last Answer : Answer: Option B